Cisco :: PHP Scripts (Gmailcheck) On IP Phones?
Jun 20, 2011
I' trying to access my Gmail account from my IP Phone (Cisco IP Communicator, don't have an actual device at the moment). The services work greatly (I tested berbee services and they work fine) I came across the Gmailcheck service. [URL] I downloaded all the files and added the "statusMsg.php" in my services list. Now when selecting Gmailcheck on the IP Communicator, it just shows the PHP code script : No interface, no gmail...
So I'd like to know : How to do to make this PHP script work ? Or is there a better way to access my Gmail accounts ?
View 2 Replies
ADVERTISEMENT
Jan 4, 2012
I have a CUCM BE environment with a number of remote users with 8961 phones connecting to an ASA 5501 via AnyConnect. The phones register fine and can make inbound/outbound calls as well as four digit dialing to other users at the corporate site.
The problem is when a remote user tries to four digit dial another remote phone. The called phone will ring but there is dead air once answered and then the line goes dead.
This sounds like a routing issue to me. How to get AnyConnect clients to be able to reach each other?
View 3 Replies
View Related
Jun 14, 2011
I have a new install with 3 SF300 switches, setup as vlan 2, the switch connected directly to the 2901 router has no problems, plug in a phone and it gets an IP, but if connected to either of the two swtiches behind the first switch, they do not get an IP. I am seeing the DHCP request hitting the router, and the router sending the IP to the phone, but it never gets the IP.
*Jun 15 10:40:20.040: DHCPD: client's VPN is .
*Jun 15 10:40:20.040: DHCPD: Sending notification of DISCOVER:
*Jun 15 10:40:20.040: DHCPD: htype 1 chaddr 40f4.ecef.bded
[Code]....
All ports are setup as trunk on vlan 2 including the ports that connect the switches together. Not sure what the problem is, but they are going live tomorrow and only have 48 out of 120 phones.
View 1 Replies
View Related
Jun 22, 2012
why our PBX system would freeze up the phones. There is no real reason why this happens. We have the PBX on its own circuit board, so its not sharing any power, we only have about 200 phones on the system, so that is not the issues. Its properly cooled. It just seems to happen that our phones freeze, and when they start freezing it seems to happen in pairs.
View 1 Replies
View Related
Nov 17, 2011
If you have some clusters with +8000 phones, how would you plan a strategy to upgrade the firmware of all the phones?
If the 8000 phones are reset the network BW could be come a real mess. Besides the CM could hang with so many tftp downloads.
The approach is going resetting phones in little sets, like ten phones a time.
View 2 Replies
View Related
Mar 31, 2013
I have a problem with my Cisco 7961 phones not registering on my CUCM 8.6 install on ESXi 5. Weird because I have Cisco IP communicator phones that register with no problem. You guys know what I can be missing. I have restarted the CUCM and services multiple times. The phone log on my phones say it can't find dhcp and DNS unknown host but my CUCM is configured by IP address. I also attached some screenshots
View 3 Replies
View Related
May 13, 2012
I am working in Private IT company. The facility is having 4000 users and it is a high resliency site having two core switches and nearly 40 access switches. All core and access switches are 4506E switches and odd vlan is taking core-1 and even vlan is core-2. We are having cisco ip phones 6921 connected as daisy chain.( Phone is connected to access switch and the desktop is connected to ip phones). The Ip phone are getting registered cisco call maneger server. The call manager one leg is connected to one core switch and another one is core 2 same like my DHCP server.
For all vlans the the default gateway is my firwall. The voice needs to hit the call manager, hence we have implemented a source routing to call manager for the voice vlans. the problem is once we down the Core-1 some of the IP phones are not getting registered no matterit is on odd or even vlan. The same issue for Core-2. We suspect that there might be some issue in the DHCP server for voice vlan routing. But server team is saying that there is no issue with the DHCP server.Now network is vulnerable that if any core switch is down my voice ip phones will be down.
View 3 Replies
View Related
Jun 5, 2009
I have some Catalyst 3560 PoE switches running the latest 12.2(50)SE1 image. I have a working configuration for STP, QoS, Voice & Access VLANs, Port-Security & IGMP snooping - I stress this is working PERFECTLY. Now I have been playing with wired 802.1x port authentication for a while which again I have sucessfully deployed on ports without IP Phones. I did some more testing with 802.1x clients behind some Cisco IP Phones and after understanding the issues and workarounds I thought I had a working environment. The environment is XP SP3 with the new separate wired 802.1x supplicant, workstations are all in a 2003 AD Domain and the wired 802.1x settings are configured through group policy. I had issues with Windows Server 2003 SP2 not working behind IP Phones but this I put down to the supplicant being different from the new one in XP SP3. MS don't have any plans for Server 2003 SP3 (or XP x64 SP3?) nor can I find any hotfixes to resolve this so it's a 'caveat'.Anyway I have tested this many times and with XP SP3 and the new supplicant it all seems to work well (only the access VLAN is using 802.1x Authentication, I am not authenticating the IP Phones via 802.1x).
Now today it stopped working and 802.1x clients behind the 7970 IP Phones no longer authenticate. I have spent an hour or so looking at this and the IOS is the same, as is the configuration on the IAS (Radius) server, as are the XP clients. I was scratching my head a bit and then looked at the IP Phone - the software on the phone has been upgraded to 8.5(2) - previously it was 8.4(4). I managed tp downgrade the software via CUCM to 8.4(4) and it now works. I have retested it several times so this is obviously an issue (either a new feature or a bug?) with the latest code for the 7970. I have checked and it's the same codebase for all the latest IP Phones - 7906, 7911, 7931, 7941, 7942, 7945, 7961, 7962, 7965, 7970, 7971 & 7975 which was released on 1st June. I have looked through the release notes and EAP-FAST has been added but this is an update to the EAP supplicant on the phone and not a feature of the 802.1x pass-thru from the attached device. I can find no other 802.1x or EAP references.
View 9 Replies
View Related
May 29, 2011
PoE works fine with C 1131/1141 Access Points and C-7975 IP phone but PoE does not seem to work on 7960 Phones nor on the C-1121 Access points
All devices work properly with the Cisco power injectors or on a Cisco Cat-29XX switch
Is there a trick to make PoE work for older devices ?
View 7 Replies
View Related
Jul 14, 2011
I want to connect a 6911 IP Phone to a SG 300 switch. This is my scenario: vlan 3 data, vlan 9 voice, vlan 10 admin.I have a trunk on port 10 of the SG 300 (vlan 1 untagged, vlan 3,9,10 tagged) and it is connected to a switch 3560, this switch has all the L3 configuration of the vlans and the SG 300 switch has an IP on the admin vlan (10).Also i added the OUI of my IP phones an created an LLDP Policy. Right now I have a 7941 IP Phone working but 6911 is not working. Iam using the new version 1.1.0.73 that supports CDP.
Also I noticed that even when my PC and IP phone receive IP address they can not ping each other nor the SG 300. They only can ping the default gateway or IP addresses in diferent vlans but connected on 3560 switch.
View 5 Replies
View Related
Oct 3, 2011
Looks like I still have an issue with LMS to recognize the IP Phones in UT as IP Phones. SNMP RO on Call Manager is enabled and is green in CM (e.g. topology) - so SNMP get is basically fine. The Phones are recognised as End Devices in UT.
As far as I understand, now if I start a Phone Aquisition, the CUCM is polled by LMS to gather additional information about the phones. So it seems there is a problem with the SNMP polling of the Call manager?
View 5 Replies
View Related
May 19, 2011
I am trying to configure my ACS to allow 802.11 phones to authenticate. I have searched high and low for documentation on doing this with no luck. We are using unified wireless with a mix of 5508 and wism controllers. I am able to authenticate windows devices against active directory via the acs but can't seem to get anything working with the phones.
View 3 Replies
View Related
Dec 18, 2011
I have a question regard to switch SFE2010P, i have 2 vlan ( data and voice) and we want to configure Ip phones SPA502G, the question here is how can i make to suport 2 vlans on the same switch port, like the catalyst IOS switch port acces vlan x and switch port voice vlan x, if i set up the switch with the voice vlan like tagged doesn't work, but if i set up the voice vlan like untagged vlan its works but the PC attached to the data port on the SPA502G doesn't work?
View 1 Replies
View Related
Jun 13, 2011
I have 2 (and maybe soon 5 more) 7940G phones to add to my network, which already has a Netgear POE capable switch. I've since discovered that early Cisco POE isn't the same thing as current POE, and the switch doesn't power the phones.
I was looking at adding a Cisco SD208P 8-port switch to power the phones, but I soon discovered it only has 4 POE ports, and I'm not sure that this switch will even power the 7940G phones. And if the other 5 phones show up, I'll need two of those switches with no room for expansion on the voice network.
Will this switch power those phones?Is there another small switch available so I don't have to replace my existing switch infrastructure to get these phones to work? Or do I need to scrap the phones and get something newer that will work with the current POE standards?
View 2 Replies
View Related
Dec 16, 2012
We have a Cisco ASA 5520 and use the Cisco VPN Client a lot, but I can't seem to to get Android phones to connect (Ice Cream Sandwich OS), it seems to want use Anyconnect
View 2 Replies
View Related
Jul 29, 2012
I have installed LMS 4.1 and discover all the devices (router/switches) but i want to show IP Phone on the LMS. I am unable to discover call manager in LMS 4.1 topology.
In Call Manager 8.6 in Cisco Serviceability under snmp setting i have enable the read community string and check snmp, MIB service are running.AM i using the correct proecdure. How can i get the Call Manager on LMS server so that i can see IP phones on LMS topology. 8.6 is installed on VM Ware.
View 4 Replies
View Related
Feb 1, 2013
My house has wifi before phone guy came and set up wi fi cordless phones worked now it sounds like i am talking in a tunnel and the other party can not hear me.. my corded phone works fine phone company told me to get new cordless phones.. currently have 6.0 have tried 5.8.
View 1 Replies
View Related
Nov 4, 2012
how to connect wifi on mobile phone? how it works? my handset is LG T310i having wifi facility
View 1 Replies
View Related
Aug 14, 2012
Phones will not link to my wireless modem?
View 1 Replies
View Related
Mar 12, 2012
has anyone here played around with uploading compatible audio files for custom rings and MOH and/or personalized backgrounds for the phones? I was only taught the basics in our CUCM v6.0.1 and am looking to figure out how to get some good music on my phone as well as play around with other "cosmetic" features. The phone I'm testing with is a 7971(color).
View 4 Replies
View Related
Oct 28, 2012
I have an SRP547W hooked up as the office router with the standard office phones connected via the telephone ports at the back of the unit using 2 SIP lines as well as the PSTN by dialling hash first. We have just added a new staff member and bought an SPA303 with the intention of connecting it through registered SIP lines on the SRP547W, and hopefully have the facility to use the PSTN line when the SIP lines are busy.
The problem is, it connects to VLAN100 and gets its IP address and initializes fine however no lines show as configured and it can't make or receive calls. What do I need to configure on the SPA303 to tell it to use the SRP547W as its SIP Server/Proxy (not sure of the terminology).
View 4 Replies
View Related
Feb 20, 2012
I have a WLC 4402 on my network. Recently mobile phones can connect to the wireless network and obtain a valid IP address. This IP is pingable from a workstation anywhere else on the network. However, these phones will not display web pages. They come up page cannot be displayed. I even tried putting Google's IP address in the phone's browser and it still did not display. I can connect through the same WLAN via a laptop or iPad. These devices have no problem displaying web pages. I even went ahead and created a new TESTWLAN with no encyption but to no avail. Same results: laptops connect and display web pages and smart phones connect, gain IP but do not display web pages. Comes up page cannot be displayed. This matters not whether its an iPhone or Android platform.
View 8 Replies
View Related
Oct 22, 2012
i am looking at quoting the SF302-08P for a client which will have three small offices interconnected via single mode fiber. I am planning on connecting them to a 3560 switch. Each office will have no more than 3 - 7942 phones. I reviewed the notes on this switch and it seems it should support this phone type without any issues.
View 8 Replies
View Related
Mar 12, 2013
We are facing problem with Cisco IP phones which are connected to module WS-X4248-RJ45V.Phones are getting restarted and sometimes phones will not take power.Initially we suspected issue with power consumption, but we have enough power in the module.
View 3 Replies
View Related
Jun 5, 2011
I've got an ASA 5505 running 8.2 configured for solely as an IP phone proxy, it is the default gateway for the cucm box and PRI router, its inside interface is directly attached to the same subnet as all internal phones as well. Calls can be placed from either end, but after call is established, proxy phones does not hear audio from internal or pstn phones. The proxy phone registers with cucm with the remote internal IP of the phone that obviously cannot be reached by corp network.
Debugging from pri router shows the rtp traffic destination is the internal ip address of the proxy phone 192.168.0.50, why is the phone registering with its internal IP 192.168.0.50 rather than its Natted external IP 50.50.50.50 that can be reachable by cucm and other phones?Proxy phone is a 7945, after it registers, I do not see it under sh phone-proxy secure-phones, or sh phone-proxy signaling-sessions while on a call.
ASA Proxy config
interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1nameif insidesecurity-level 100ip address 10.10.33.25 255.255.255.0!interface Vlan2nameif outsidesecurity-level 0ip address 65.x.x.24 255.255.254.0!boot system disk0:/asa823-k8.binftp mode passivedns server-group DefaultDNSdomain-name ----.comsame-security-traffic permit intra-interfaceaccess-list inside_access_in extended permit ip host 10.10.33.10 anyaccess-list inside_access_in extended permit ip any host 10.10.33.10access-list inside_access_in extended permit ip host 10.10.33.5 anyaccess-list inside_access_in extended
[code]....
View 10 Replies
View Related
Aug 8, 2010
I have an ESW-500, a SPA525G (also tried 504G), Polycom IP330/670 phones, and a Switchvox (Asterisk-based IP-PBX) and CDP causes some issues.Both the SPA5xx and Polycom phones support CDP but it appears to operate differently between the phones. And, surprisingly, worst of all on the SPA's.
In short:
* Switch - CDP enabled (VLAN 100), DHCP disabled (Option 82 enabled) which is basically how it comes out of the box
* Polycom phones - CDP enabled (default)
* Cisco phones - CDP enabled (default)
* DHCP/TFTP server on port 1
* Phones on ports 7,15,19 - default as smartports for Desktop & Phone
* Switchvox on port 17 - port configured as General (not Trunk) with 1U & 100U VLANs. This was required to get Polycom phones to appear in Switchvox config
With that configuration the Polycom phones work perfectly. They appear in the switch web-GUI under CDP, they present in Switchvox and can be configured.But with that configuration although the Cisco phones appear in the CDP screen they do not get DHCP. My DHCP server can see 'DHCP Discover' messages but it just goes around in circles. Disabling CDP on the switch will allow the phone to get an IP but disabling CDP on the phone still has the same problem. When I saw "around in circles" this is what I mean....
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:25:84:06:12:46 [10/08 13:51:27.031]
DHCP: proposed address 192.168.100.16 [10/08 13:51:29.000]
4064 Request 2 not processed [10/08 13:51:29.062]
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:25:84:06:12:46 [10/08 13:51:30.093]
DHCP: proposed address 192.168.100.16 [10/08 13:51:31.593]
4064 Request 2 not processed [10/08 13:51:31.656]
[code]....
With the difference being there's a 'DHCP Inform Msg' which there never is from the Cisco.I have tried many options regarding DHCP Relay, DHCP Server addresses, DHCP VLAN Interfaces, smartport settings etc but with CDP enabled the Cisco phone just will not get DHCP.
View 2 Replies
View Related
Mar 28, 2011
I am doing MAB (MAC authentication bypass) for IP phones and printers.
But these devices are authenticated with different identity stores (IP phones with AD, printer local host on ACS)
Is there any specific AV Radius attributes that i can use in the compound conditions selections which is specific for the IP Phones?
so when doing the Authentication, i could seperate each type (IP phones or Printers) with the appropriate database.
View 1 Replies
View Related
Apr 10, 2012
According to the documentation, the Switches SFE2010P and SGE2010P have a maximun total power output of 360W. Using only SPA500 series IP Phones that have 10W maximun input, how many SPA500 IP Phones could be connected safely to this switches? 36 ? or 48 ?
View 1 Replies
View Related
May 22, 2013
We have a problem when I call bettween two 7925 in same SSID, VLAN voice. They cannot hear each other. The SSID and LAPs are in Flexconnet. From desk phones there are no problem and betwen one deskphone and one wireless phone there no problem too.
View 2 Replies
View Related
Apr 16, 2013
I have signed up with Axvoice for cheap voip calls. My problem is I am trying to use three phone sets with the same adapter (grandsteam HT 286). In accordance with Axvoice's live support instructions, I have plugged the main phone jack of my house into that adapter. I am getting crystal clear voice quality in one phone set. That obviously indicates, there is no problem with the service. However, on two phone sets, voice is not clear and I am having noise and sudden call breaks. I have checked all the ports but could not find anything. I am jobless right now.
View 2 Replies
View Related
Oct 20, 2011
I have pretty much the EXACT same issue. Revo 3700, Sky Unlimited Broadband, and a bunch of laptops and phones that can connect to the internet anywhere in the house without a probleI had the Revo connect all day last Friday (for the first time), prior to that it had connected a hand full of times, but only a very slow connection. For the last 4 days it hasn't connected at all, but says the signal strenth is 4 or 5 bars. I'm typing this from right next to the Revo on my laptop without any issue.
View 4 Replies
View Related
Feb 8, 2012
I have an issue that my 4 daughters are accessing the internet at all ungodly hours of the night via their mobile phones and ipods. Not only should they be in bed but they are racking up our internet useage. We can't turn off the router altogether as one of those daughters, is also up at ungodly hours, with Uni work and another doing her finals for Year 12. Am i able to block their access somehow through the router without loosing the entire internet?
View 4 Replies
View Related
Jun 25, 2011
I have an HTC INSPIRE cellphone and I would like to get free Wi-first wherever I go.
View 3 Replies
View Related
