Phones Will Not Link To Wireless Modem?
Aug 14, 2012Phones will not link to my wireless modem?
View 1 Replies
ADVERTISEMENT
Cisco VPN :: 8961 - IP Phones With AnyConnect On ASA / Can't Call Other Remote Phones
Jan 4, 2012I have a CUCM BE environment with a number of remote users with 8961 phones connecting to an ASA 5501 via AnyConnect. The phones register fine and can make inbound/outbound calls as well as four digit dialing to other users at the corporate site.
The problem is when a remote user tries to four digit dial another remote phone. The called phone will ring but there is dead air once answered and then the line goes dead.
This sounds like a routing issue to me. How to get AnyConnect clients to be able to reach each other?
Setting Up A Modem / Router Combo (D-Link DSL2730-B) As A Dedicated Modem?
Feb 28, 2013i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI:
VCI: These 2 already came with presets. Should I just leave them?
Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA
Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX
Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
[code]...
Wireless Link To Router Without Cable Modem?
Jun 6, 2011i'm trying to connect to my wii n my laptop. i have a cricket broadband hookup to desktop.
View 1 Replies View RelatedCisco :: Wireless Phones 7925 No Voice With Flexconnect
May 22, 2013We have a problem when I call bettween two 7925 in same SSID, VLAN voice. They cannot hear each other. The SSID and LAPs are in Flexconnet. From desk phones there are no problem and betwen one deskphone and one wireless phone there no problem too.
View 2 Replies View RelatedD-Link DIR-655 :: Motorola SB6141 Link Speed LED On Cable Modem Never Glows Blue
Feb 26, 2013when I connect my DIR-655 to the Motorola SB6141 cable modem I notice that the link speed LED on the cable modem never glows blue indicating a gigabit connection, it only glows amber indicating a lower negotiated speed. I am using a Cat6 cable between the two devices and have also tried a Cat5e cable.
When I try and force the WAN port speed to 1000Mpbs in the router interface the cable modem link speed will not light at all with no connectivity. Only resetting to Auto WAN port speed restores functionality albeit at the lower negotiated speed setting.
I'm running the DIR-655 rev B1 at 2.03NA firmware level.
I did connect the modem directly to my PC that uses an Intel Gigabit ethernet card and still had the lower connection indication (Amber) so it seems that the modem might be faulty.
Cisco Wireless :: 6509 - Android Phones Won't Connect Guest Wireless
Jun 10, 2012Android users can connect to our hospital guest wireless but will not have connectivity. Our wireless infrastructure is WISM based with 2 controllers on 6509 platform. We have a mixed environment of 1231, 1252 & 3502 series APs.
Had issue connecting just Android devices? All other devices connect fine.
Linksys Wireless Router :: E4200 - Connecting 2 Android Phones?
Aug 19, 2011I have an issue with a brand new E4200 router. My E4200 can connect no issue with the following devices: Ipad, AppleTV, Dell Laptop, Ibm Laptop. It is also wired connected to my home PC. Internet works fine and file sharing/network works good for all the above devices.
The problem is that My wife and I's Phone can not detect the wifi network and can not connect to it. The SSID broadcast is enabled on both frequencies (2.4 and 5). I have try configuring the network manually on both the Android phones..it does not work.. it records the data but keep sayng the network is out of range (although I'm right next to the router). I hva eplayed with various channels on both frequecies and played also with the MTU size.One of the Android phone is Garmin the other Acer Liquid...different brand running both Android 2.2...
Firmware on E4200 is 1.0.02
All settings reset to Auto/MIxed for now.
WPA2 is enable with security key
SSID is enabled on both frequency
no MAC address filtering is setup
Both my phones can detect other networks and can connect fine to friends and family networks...So I suspect a compatibility problem between router an Android..I have contacted Linksys support twice with no avail. I have contacted both Acer and Garmin...they refer me to linksys
Cisco Wireless :: 7921 Phones Disconnect Ten Time An Hour
Jun 27, 2011One of my 7921 phones disconnect ten time an hour and during conversations. Sometimes, people who call on this phone are redirected to the answer message.This phone is connected through WIFI network and Cisco Callmanager 4.2 manage all phones (we have about 80 phones on the network). I thought it was a problem with the phone but I exchange with another one and it's exactely the same problem. The problem is just for a line in particular. All the 7921g phones in my company are configured from mac address in the call manager. This problem occured after a storm but I'm not really sure that it's related to.
View 2 Replies View RelatedWireless :: Unable To Make Connection Through Wifi Modem Tp-link?
Sep 25, 2012unable to open 192.168.1.1 in google chrome but can access other net work.
View 1 Replies View RelatedD-Link DIR-600 Modem Can Connect Directly To PC But Not Through Wireless Or Wired Router
Aug 12, 2012I've been using D-Link DIR-600 wireless router for two months with my ISP, SmartBro. A week ago my internet went down due to heavy rain and technical support had a home visit yesterday to re-activate my internet connection. My net connection came back smoothly using a direct connection from modem to laptop.When I tried to connect the modem to my wifi router, the internet was not detected. Even if I reset the router settings, no internet connection was detected. Initially, I thought there is a problem with my wifi router so I connected the modem to our Edimax wired router but still it could not detect internet access. Every time I open a browser while connected to a router, this message is shown (see attached screenshot).
I tried using another ISP, Wi-Tribe with both wired and wifi routers and everything worked well. So now I assume the problem lies with my SmartBro ISP. I called the ISP hotline but they told me that they do not provide support for router connection problems; only with single, direct connect to a PC.I asked a neighbor IT technician to look into my problem but he too could not solve the problem.
Connect TP-Link TL-WR740N Wireless Router To TD-8616 Modem?
Nov 5, 2011I have a TP-Link TD-8616 modem and TP-Link TL-WR740N wireless router. Both are ADSL compatible. Each time I tried to connect with the wireless router I will no longer have internet service. Teksavvy is my internet provider. how I can get this to work.
View 3 Replies View RelatedD-Link DIR-615 :: Setup Two Wireless Networks On One Comcast Cable Modem?
Apr 7, 2013We have kids in the house and I'd like to limit their internet access to certain times of the day but because of the great amount of devices they use (phones, tablets, laptops, etc.) the only way I could think of doing that easily was to set up two wireless networks: one that the adults could use 24/7 and the other that the kids could access during certain set hours.
Here's the equipment I'm working with:
DLink DIR 615 wireless router
DLink DIR 515 wireless router
Motorola Surfboard cable modem S85101U
I plugged the DLink 615 in, set it up for DHCP client and plugged it into the cable modem. I lef the default 192.168.0.1 IP address for the device. On that router, I also reserved the 192.168.0.199 IP address and assigned it to the DLink 515.I also gave the DLink 515 device the IP 192.168.1.1 so I could administer it.I set the DLink 515 to static IP and made the IP 192.168.0.199 and the default gateway 192.168.0.1.I plugged the DLink 515 into one of the LAN ports in the DLink 615.I set a schedule on the DLink 615 to shut down internet access to the DLink 515 at a certain hour and turn it back on at another time.Everything seems to work ok, but at least once a day we have to unplug and plug the routers to reset them.
TP-Link ADSL2+ Wireless :: TD-VG3631 Does Modem Support NAT Loopback
Apr 3, 2013Region : UnitedStates
Model : TD-VG3631
Hardware Version : V1
Firmware Version : TD-VG3631_V1_130108
Does this modem support NAT Loopback? I can't get it to work.If so, why not, can we have a firmware that supports NAT Loop back?
TP-Link ADSL2+ Wireless :: TD-W8968 Works Must Turn Off Modem
Apr 28, 2013Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version :
I have a problem in the model TD-W8968 of modem.Wireless abruptly stopped Even works must turn off the modem Malk happens sometimes 3 to 5 times
TP-Link Dual-Band Wireless :: Cable Modem And WDR4300 Don't Seem To Like Each Other
Feb 14, 2013Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : charter, its smarter.
so i have a sb6141 cable modem that is mine and not a lease. it works like a champ when hard wired to my desktop. i just got my hands on a new shiny tp-link wdr4300 yesterday and after messing with it for the better part of 2 hours, something seems to be amiss with the communication between the two. everything will be humming along fine and all of a sudden i get the dreaded PAGE CANNOT BE DISPLAYED. sure as the world i look at the modem and all the lights are off and its resetting itself. and honestly this continues until i pull the power and plug it back up. i think maybe one time in the middle of the night i actually saw it reset itself and then come back online.
TP-Link ADSL2+ Wireless :: TD-W8960N Modem Can Be Used As An Additional Router
May 4, 2013Region : Canada
Model : TD-W8960N
Hardware Version : V1
Firmware Version :
ISP : Bell Canada
Can I use TD-W8960N an additional router with my ISP bell router. Will it increase my speed and range of internet in my home.
D-Link DSL-2750U - Connect Wireless Access Point To Modem
Jul 7, 2013At my office we have a wireless modem(D-Link DSL-2750U) and all the clients are connect to it wirelessly with a wireless lan card. at the next floor we have two pc(without wireless lan card) that I want to connect them to this network, I have a switch and a wireless access point(TP-Link TL-WA701ND). my Question is that how can I connect the WAP to Modem? I set the operation mode of WAP to client and add the MAC address of it in the table of wireless modem but the clients cant connect to the network.
View 1 Replies View RelatedLinksys Wireless Adapters :: WUSB600N Can't Use 5GHz As Nokia Mobile Phones
Feb 28, 2011I recently purchased WUSB600N because I want to use the N speed of my WRT320N router. My laptop only has a built-in 802.11g network adapter. Kindly share your insgihtson why I only get 6.5 Mbps using my WUSB600N compared to 18.0Mbps using my builtin 802.11 g network adapter in my laptop? Too bad I can't use 5GHz as Nokia mobile phones that use our wireless connecion are only G capable. Even iPhone 4 cant fully use 5Ghz in 802.11n.
View 1 Replies View RelatedCisco Wireless :: WRVS4400N - Smart Phones Loose Internet Access
Apr 9, 2012I am using WRVS4400N in our company as a AP only. Before some time, when majority of wireless clients were computers, everything worked fine. But now, when mobile devices are in majority, something strange is happening. While portable computers still work fine, smart phone and tablet have extreme problems.
Although there is indicator that WiFi is connected and signal is strong, there is no guarantee that there is an internet access. Most of the times there is none. You can fix this by simply disconnecting and connecting WiFi on mobile device, but after a while, internet will be inaccessible again. Or you can wait and eventually you'll get to the internet access again.
Wireless :: Tp Link Td-w8901g Modem Receive Wifi Signals Through Wan And Give Out Through Lan
Jan 31, 2012I have a TP link TD-W8901g modem router with 1 wan and 4 LAN. My questions is can i use this modem to receive wifi signals through wan and give out through lan. i currently use internet from telephone cable. But i have got a free hot spot near my home. Currently i Am using a pc without wireless card.
View 1 Replies View Related2wire 2701HGV-W Modem - Compatible With The TP-Link WN951N Wireless Card?
Nov 26, 2011I've got a 2wire 2701HGV-W modem. I was wondering whether it was compatible with the TP-Link WN951N wireless card?
View 5 Replies View RelatedTP-Link 300Mbps Wireless :: Connect TL-WR841N To ZTE ZXDSL 831 Adsl Modem?
Apr 27, 2013Region : India
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP : Reliance
I got a new broad band connection , its with an ADSL modem (ZTE ZXDSL 831). Now i want to plug in my TL-WR841N to use my WiFi and to connect to my second machine!! no matter what setup i try, i'm unable to connect
D-Link DIR-615 :: Connect 2 Wireless Modem Routers + Switch In Home Network
Nov 14, 2011I have 3 pieces of hardware:
1. Green Packet DX-230 WiMAX modem with router
2. D-Link DIR-615 ver G2 (from my ISP)
3. D-Link 8 port desktop switch
I previously used the DIR-615 with my high speed broadband connection. However I had to move to a new house and here I can only get WiMAX. I want to...Place the WiMAX modem upstairs to serve as modem and wireless access point Have the DIR-615 function as the main router and firewall (downstairs) Use the switch to connect all the rooms in my house FYI my WiMAX modem has no connection configurations. I just plug it in and it'll connect automatically to the WiMAX signal. It has 2 LAN ports but no WAN port. From my understanding of networking, I have to turn off DHCP on my WiMAX modem, put it in the same IP range as my DIR-615 (192.168.0.100-199), and disable UPNP and NATPMP. After this I'm stuck.How do I tell my DIR-615 to use the WiMAX modem as it's WAN connection?Should I reserve an IP for the modem in my DIR-615?
TP-Link ADSL2+ Wireless :: TD-W8961ND - Can't Ping My Modem Router Remotely
Oct 16, 2012Region : Egypt
Model : TD-W8961ND
Hardware Version : V3
Firmware Version :
ISP :
my router is placed in my home. i want to access to it with IE from my office.but no luck.also i try to ping the WAN ip address of the router.
TP-Link ADSL2+ Wireless :: TD-VG3631 - Modem Crashes Under Torrent Load?
Dec 28, 2012Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version : TD-VG3631v1_0.6.0_1.0_up(121214)
ISP : TPG
I've noticed the modem becomes unresponsive under use with torrents and only thing that works is to turn it off & on from power button then works for a few more minutes then crashes again on the latest firmware.
TP-Link ADSL2+ Wireless :: TD-VG3631 - Modem Connects DSL Then Drops Repeatedly
Jan 23, 2013Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version : TD-VG3631_V1_130108
ISP : iinet
I have set up this modem correctly as it will occasionally sync and internet will be connected for a short time 5-10 seconds then loses sync.Have asked ISP to check line and they say it is fine. I have upgraded to current firmware but same result.I purchased for wireless N and print server features.Have reverted back to 4+ year old Netgear DG834GV which works perfectly with same cabling, filter etc. ISP suggest connect VG3631 on ADSL 1 but if I need to do that I may as well take it back and buy a cheaper wireless AP.I also set my existing Netgear as modem only and connected to EWAN port of VG3631 and it did the same thing (kept dropping connection), this suggests that it is a VG3631 hardware or software problem (completely separate to DSL/Line issues).
TP-Link ADSL2+ Wireless :: TD-VG3631 - Modem Crashes Under Torrent Load?
Dec 27, 2012Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version : TD-VG3631v1_0.6.0_1.0_up(121214)
ISP : TPG
I've noticed the modem becomes unresponsive under use with torrents and only thing that works is to turn it off & on from power button then works for a few more minutes then crashes again on the latest firmware.
Linksys Wireless Router :: EA3500 Phones Connect To Wi-Fi But Cannot Sens / Receive Data
Feb 3, 2013My phone and my friends phones can connect to the wifi but I cannot receive nor send data from it. The phones work completely fine elsewhere. Here is the kicker, my computer works completely OK on the router and my phone used to work for 3-4 hours before this issue started going again. Now it is constantly. I restarted the modem, default reset it and still nothing. I get an IP address too and it stays connected. Cisco thinks its the phone, but its multiple phones that are having the problem and my phone and other works completely fine at other places.
View 7 Replies View RelatedCisco Wireless :: AP1010s / 1131s And 3502s - IPhones And Other Smart Phones Being Excluded
Jan 24, 2012Have issue with iPhones and other smart phones being considered as excluded clients for the reason of Identity Theft? I am looking at one of my controllers and there are almost 680 excluded clients and most of them are smart phones and they are all being excluded for the same reason. It seems to be mostly iPhones but not all of the iPhones are experiencing the same behavior.
There is a mix of AP types (AP1010s, 1131s and 3502s) and also a mix of controller types (44XX and 3508). I have not been able to find any information to explain this behavior on the phone side and/or the wireless side.
Protocols / Routing :: Cannot Connect Wireless Tp-Link Adsl2+ N300 Modem To The Internet
May 13, 2012I bought yesterday a wireless modem/router and Tp-Link Adsl2+ N300 Modem Router Td-W8960n.I have 2 laptop computers at home.The first issue I have is that with one of the laptops (quite old - Acer Aspire 2420-2579 with Windows Vista Basic Service Pack 1) I can not connect (wireless) to the internet. It says local access only. However in other countries (IM in NZ) it does connect to internet. It does work when I use an Ethernet cable between my router and the laptop. The second issue is with my other laptop. A HP Pavillion DV-4 windows vista home premium service pack 2. I manage to get wireless access to the internet but every couple of minutes the connections drops and starts again by itself�. After 1-2 min approx�. it is getting pretty annoying!I don�t think it is the routher as I also have an XBOX 360 connectet to the internet usign the same device and works absolutely fine!
View 6 Replies View RelatedTP-Link ADSL2+ Wireless :: Lan Setting In ADSL Modem Router TD-W8968 Failed
Jan 2, 2013Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP : Streamyx
In the process of Lan setting my new wireless adsl modem router TD-W8968, an error message shown when I press save. Error Code: 1, Internal error.
TP-Link 300Mbps Wireless :: WR841ND / WR541G - Configuring 2 Routers To One Cable Modem
Mar 29, 2013Region : UnitedStates
Model : TL-WR841ND
Hardware Version : V8
Firmware Version :
ISP : optimum online
I have two wireless routers:
TP Link TL-WR841ND
and
TP Link TL-WR541G
I would like to:
use the TL-WR541G for my children wireless laptop, wireless ipad and wireless iphones.
I can turn this unit off at a specific time each evening as I wish.
The WR841ND is used for my wireless laptop, wired iMac, wired Roku stream player and wired Voip adapter.
I tried a few things but really do not know what I am doing and I cannot get both wireless routers to access the internet.
What I tried so far:
Cable modem ethernet out to the input on the WR841ND router. took one of the four hardwire outputs from the WR841ND and ran into the input on the WR541G I powered on the cable modem....it booted... i then powered each router up and waited for each to boot. I launched web browser and navigated to : http://192.168.0.1/ this allowed me to setup the WR841ND router.
it's current settings:
Firmware Version: 3.13.27 Build 121101 Rel.38183n
Hardware Version: WR841N v8 00000000
WAN type: dynamic IP
LAN IP address: 192.168.0.1
subnet mask: 255.255.255.0
DHCP Server: enabled
Start IP: 192.168.0.100
End IP: 192.168.0.199
How do I set up the second router? I tried to disable the DHCP server on router 2 (WR541g) and change the IP but don't know what to change it to.