Restrict The Use Of Phones Accessing Facebook Through Router?
Feb 8, 2012
I have an issue that my 4 daughters are accessing the internet at all ungodly hours of the night via their mobile phones and ipods. Not only should they be in bed but they are racking up our internet useage. We can't turn off the router altogether as one of those daughters, is also up at ungodly hours, with Uni work and another doing her finals for Year 12. Am i able to block their access somehow through the router without loosing the entire internet?
View 4 Replies
ADVERTISEMENT
Jan 4, 2012
I have a CUCM BE environment with a number of remote users with 8961 phones connecting to an ASA 5501 via AnyConnect. The phones register fine and can make inbound/outbound calls as well as four digit dialing to other users at the corporate site.
The problem is when a remote user tries to four digit dial another remote phone. The called phone will ring but there is dead air once answered and then the line goes dead.
This sounds like a routing issue to me. How to get AnyConnect clients to be able to reach each other?
View 3 Replies
View Related
Nov 18, 2011
i have DSL router in my home using wifi by it... it is on sharing by DHCP mode. and my question is how to restrict bandwidth to other users? like full access to one use and 50-60 kbps to another user?
View 1 Replies
View Related
Nov 18, 2011
how do I block sites like facebook?
View 3 Replies
View Related
Jan 9, 2011
How to restrict my Router by putting in a Pass word so my neighbours could be stopped using my highspeed internet and thus makinit weaker for my household.
View 3 Replies
View Related
Feb 28, 2012
sir i have my router and i want to restrict it to my personal pc.
View 3 Replies
View Related
Sep 21, 2012
I want to block facebook from my network. I am using mikrotic router for internet, It is allow to block all ip series so the problem with this I can't even open any site which having facebook plug-ins.
View 2 Replies
View Related
Oct 23, 2012
I have fiber optic net, going into a TP Link 1043 ND router out in my garage.All of the 4 lan ports go into one of the rooms in the house. I also have two more routers of the same kind, one downstairs and one upstairs.They are configured in a way, that DHCP server is only turned on, on the one in the garage, the other two act as switches.My problem is that 50 % of the time I can't acces facebook, and some other random sites.The interesting bit is that when I chat with someone on FB, I can see what they write, but my message doesn't go through.The way it goes, is that I can browse on facebook for like 5 minutes, after that its unavailable for another 5 minutes.I can still access the site from my smartphone, but only if its not connected to the wifi network, meaning the problem is somewhere within my setup.I've already tried turning the router firewall off, but that doesn't make any difference.
View 1 Replies
View Related
Sep 25, 2011
All of my clients are accessing internet through Netgear wireless router. From the router's "Block Sites" option, I've inserted all of the IP address of facebook & this was working fine.
View 9 Replies
View Related
Feb 22, 2011
How is it possible to block facebook (or other sites) on WRT610N router, given that I have already set up Internet Access restrictions based on day/hour ?
View 9 Replies
View Related
May 7, 2012
I am attempting to block Facebook on a WRT160N firmware v3.0.00. I have a successful policy that blocks edit.com for instance and attempted to add url... I don't want to add keyword blocking as multiple news articles are in regards to Facebook. We simply do not want the Facebook website allowed. I tested the other policies on a network-wide setting, applying it to all IPs successfully, added Facebook to them and it goes right around the block. My guess is that Facebook is most likely designed to make it purposely difficult to block.
I went through the recent articles in search, but they primarily dealt with incorrect application of the policy (spec'ing MAC, or IPs), which isn't the case here. Eventually I will apply the policies to specific Macs, but I want them to work first.
View 2 Replies
View Related
Feb 22, 2012
I have a situation where a legacy and vestigial Linksys RTP300 that's unconnected to any phones but only to the LAN seems to screw up call transfers between Vonage numbers on phones attached to a single Vonage V-Portal that's also on the same LAN. Inbound and outbound calls are unaffected. Removing the Linksys RTP300 seems to fix the issue.why this would be happening considering the RTP300 isn't connected whatsoever to any phones?
And why only call transfers are affected (attempts to transfer calls just sends calls to voicemail even if the other line isn't off-hook or otherwise in use). The network is flat where the Vonage V-Portal, the Linksys RTP300 and a single small 8-port switch are directly attached to the five built-in switch ports of a firewall router, with the WAN port of the firewall router attached to a T1 CSU/DSU.
View 1 Replies
View Related
Jan 26, 2011
I am wondering how to restrict access to certain applications; software and hardware via a router.
View 2 Replies
View Related
Feb 20, 2013
cisco 2651xm router
IOS: c2600-ipbasek9-mz.124-15.T14.bin
I have a 16 port hub (NM-16ESW) installed in this router. Is there a way to lock down this hub so that only whitelisted machines will be allowed to connect to its ports? ie: by mac address or some other type of permission method? How to be able to plug their computer into the hub and join the network unless their device has been ok'd first.
View 12 Replies
View Related
Feb 22, 2012
I have the WRT310N v2 and having been having an issue with the Facebook games for the past week. I can logon to facebook just fine, but when I try to go into a game or accept gift requests, nothing works and the page always times out. However, when I disconnect the modem cable from the router and plug it in directly to the desktop, everything works fine. All other websites (Shockwave and Pogo) work just fine, but just Facebook has the problem when the router is connected.
I went through all the settings for the router. Nothing is blocked and everything is in fine working order. The only thing I noticed was that there was a firmware update to 2.0.01 which I did, and still the problem remains. I've made sure that there are no restrictions on IE or Chrome as well. I first thought that the router was crapping out, but have since disregarded that.
View 2 Replies
View Related
Aug 19, 2011
I have an issue with a brand new E4200 router. My E4200 can connect no issue with the following devices: Ipad, AppleTV, Dell Laptop, Ibm Laptop. It is also wired connected to my home PC. Internet works fine and file sharing/network works good for all the above devices.
The problem is that My wife and I's Phone can not detect the wifi network and can not connect to it. The SSID broadcast is enabled on both frequencies (2.4 and 5). I have try configuring the network manually on both the Android phones..it does not work.. it records the data but keep sayng the network is out of range (although I'm right next to the router). I hva eplayed with various channels on both frequecies and played also with the MTU size.One of the Android phone is Garmin the other Acer Liquid...different brand running both Android 2.2...
Firmware on E4200 is 1.0.02
All settings reset to Auto/MIxed for now.
WPA2 is enable with security key
SSID is enabled on both frequency
no MAC address filtering is setup
Both my phones can detect other networks and can connect fine to friends and family networks...So I suspect a compatibility problem between router an Android..I have contacted Linksys support twice with no avail. I have contacted both Acer and Garmin...they refer me to linksys
View 1 Replies
View Related
Jun 29, 2011
i wanna restrict people from downloading havy files in my office.how can i do that on my router .I use cisco linksys E3000 router.
View 2 Replies
View Related
Feb 20, 2009
I've purchased a WRT310N router to replace an existing wired router, and am in the process of setting up the outbound firewall rules. While I see settings to restrict access to all sites (or specific sites) for a specific protocol, I don't see an easy way to only allow access to one specific site.I want to restrict outbound SMTP to one server (my ISP's).
View 6 Replies
View Related
Nov 6, 2012
I've been using my WRT310Nv2 Cisco wireless Gigabit N router for 2 weeks now, and sometimes, it's blocking access to Facebook.comI am not aware if it does the same thing with other websites, but my guess is that if I fix this one, I'll fix them all. So here I go, I click on my Facebook icon in my bookmarks and all goes well. Then, a while after, Facebook doesn't respond anymore and I'm send to a page that says "this is probably not the webpage you are looking for!" and it goes on about someone probably trying to hack my Internet and so on. But it's impossible: my network is under a solid WPA/WPA 2 security access. So I try again and click on the FB icon, and it shows me this:
"Invalid URL
The requested URL "/", is invalid.
Reference #9.c2c28f18.1352263449.304a8c9"
View 9 Replies
View Related
Mar 25, 2012
I have an E2000, and I connect wirelessly through my Macbook. When I use the internet on any laptop I connect to the router (not just the Mac) I can't log in to Facebook, Amazon, Ebay, Hotmail, or any other site, and Google image pages only load halfway. In certain websites I try to use I cannot click anything at all. I have tried unplugging and plugging back in, and I have tried resetting the router.
View 1 Replies
View Related
Jun 16, 2012
Can you suggest me how to block facebook,gmail,yahoo in cisco wireless router Model No;-WRT610N version 2
View 4 Replies
View Related
Jan 23, 2013
is there a way to restrict the upload and download of computers on a wireless network (or at least get the router to favor one computer over the others?)i have a tp-link TD-W8960N router and the computer i need the extra bandwidth on is connected to the router via cable
View 3 Replies
View Related
Sep 20, 2012
With M10, I cannot restrict internet access for specific time period. Parent Control feature doesn't satisfy the situation, and there is no build-in access-policy in web-based setup. Are you going to upgrade firmware or Cisco Connect with more flexible access time control?
View 1 Replies
View Related
Jun 17, 2012
I have a Linksys WRV200 and I wanted to know how can I restrict the internet speed for each computer on my network. Example: if my connection is 2 Mbps, One computer should have 1 Mpbs guaranteed, and the rest should split the rest.
View 1 Replies
View Related
Jan 30, 2013
I have a Cisco 887M router which I wish to restrict the devices allowed to be connected/allocated an IP address to two, and *only* two.
I can't, for the life of me, find out how to allow these two devices to connect to ANY port - I can configure a MAC restriction on a single port, but I don't know how to make it so that I can allow JUST these two devices to connect to any port in the 4 port switch/VLAN (VLAN 1 is used because the mongrel who set this up was lazy). I know the MAC addresses I want to allow
How I can do this? I *can* restrict any given port to the two MAC addresses - but if I try to add the MAC addresses to another port, they get removed from the initial one. I need to be able to have them connect to ANY port and work, but allow NOTHING else to work.
For those wondering, this is to counter a user who is utilising company resources for purposes not approved - and costing us quite a bit of money in the process.
View 10 Replies
View Related
Jan 15, 2013
I want to block sites like facebook during my workday but allow the rest of the internet.
The attached settings block facebook as desired during the filter times but after 6:30pm the filter expires and the entire internet is blocked (not just facebook). All of my browsers act as if they are hanging and won't load pages until I disable the filter.
I've also tried creating two different filters (one at a time). The first allowed full internet access all the time and the second allowed access the opposite times of the work filter. But to no avail.
View 2 Replies
View Related
Nov 20, 2011
On E4200 Firmware Version: 1.0.03, I managed to successfully set up "Internet Access Policy" (not the "Parental Controls") to set up the times when internet access is disabled for various IPs on my network.
But I could't setup a policy to block facebook.com. What I am doing wrong? See the attached screen shot. I did click the "Edit List" and apply this polity to the IP Address Range 192.168.1.2 to 192.168.1.254.
View 9 Replies
View Related
Feb 3, 2013
My phone and my friends phones can connect to the wifi but I cannot receive nor send data from it. The phones work completely fine elsewhere. Here is the kicker, my computer works completely OK on the router and my phone used to work for 3-4 hours before this issue started going again. Now it is constantly. I restarted the modem, default reset it and still nothing. I get an IP address too and it stays connected. Cisco thinks its the phone, but its multiple phones that are having the problem and my phone and other works completely fine at other places.
View 7 Replies
View Related
Apr 15, 2013
I am new to VLANs although I generally understand the concept. I have a small office with 25 desktop/laptops and 15 VoIP phones connected with a SG200-50 switch and on Port 1 I have the Cisco SRP541W router for DHCP and Internet access. My goal is simple: 1) Segregate the VoIP phones (voice) from the computers (data) and 2) Prioritize the VoIP phones traffic.
I believe this can be accomplished by setting up a second VLAN and maybe a third (if the default should not be used) and then identifying those ports as Voice VLAN ports. I guess I just need to know how to flag each interface and each port so that they all can talk to the router on Port 1 yet the voice and data will be in different broadcast domains. Also, do I need a management VLAN??
Is this setup correct? VLAN 1 - default (data) Port 1 (Trunk) (Tagged)Port 2 - 30 (Access) (Untagged)VLAN 2 - voice Port 1 (Trunk) (Tagged)Port 31 - 48 (Access) (Untagged) What should the interface settings be on each port (General, Access or Trunk)? What should the port VLAN membership be on each port (Tagged or Untagged)??
View 4 Replies
View Related
May 3, 2011
I have a XSR-1805 (Version 7.5.0.0) enterasys router here. Got SNMP server to work successfully. The thing is that I couldn't make the router restrict a range of address allowed to use a community. Only 10.1.0.13 is allowed to use SNMP in this case.
View 1 Replies
View Related
Jan 4, 2012
I have a WRT54G router and for some reason I'm unable to receive the media stream at my home, but when I connected to my friends N-type router it works fine. I have no other connectivity issues. The only thing that I remember doing that may have caused this was to upgrade my firmware because my droid phone wouldn't connect.
View 8 Replies
View Related
Jun 24, 2012
I am using 3945E Router as Easy VPN Server, with 15.1 IOS. On router I have bunch on usernames for VPN authentication, I want to restrict Router management access for them(ssh,telnet, http and so on).
View 2 Replies
View Related
Jun 4, 2012
Recently purchased the EA3500 router. Everything seems to work great except for Facebook on mobile devices with Android OS using both apps and browser. I can access FB using a laptop's browser.
View 9 Replies
View Related
