is there a way to restrict the upload and download of computers on a wireless network (or at least get the router to favor one computer over the others?)i have a tp-link TD-W8960N router and the computer i need the extra bandwidth on is connected to the router via cable
View 3 RepliesWRT160NL exchange download and upload speeds.Before the router everything is fine, then it wireless or Ethernet port occurs above situation.No difference what firmware it is (1.0.02, 1.0.03, DD-WRT...)
View 7 Replies View Relatedi recently switched from a wrt54g to a Cisco e1200 and my average torrent download and upload speeds went to 1200/kbps 100/kbps to around 200/kbs 0-1/kbps i got the latest firmware tried different channels disabled the wmm I've also tried wireless n only and wireless g only. I have no way to test the wired speed. I have a n adapter.what do i do.
View 9 Replies View RelatedSince we purchased our router in February, we've had intermittent problems with speed, and now it seems to be permanent. If we connect directly to the Comcast modem, everything is fine. If we connect to the router, directly or wirelessly, speeds drop to <3.
View 9 Replies View RelatedRegion : NewZealand
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.56405n
ISP : Snap
I just bought a v3 TD-W8960N and I'm trying to see what is the latest firmware available?On the modem it came with 1.4.0 Build 111130 Rel.56405n.When I look on the website the listed latest version is w8960nv1_un_1_4_0_111108R40398.up (that is the file inside the zip package/link TD-W8960N_V1_V3_111108)Which is the newer version? The revision number on the firmware that came installed kind of looks like it is actually newer. But if it is newer, why is not available for download from TP-Link?
I Have BT Infinity and they are pushing 70mbps to my house ....i bought an EA6500 and i had real bad internet speed but amazing conection speed with my BT Home HUB3 ... 23Mbps with Cisco EA6500 and 68Mbps with my BT Home Hub3. I found out it was the Media Prioritization so just to be safe i reset my factory settings and made sure it was turned off. Just like magic i get the same now as the BT Home HUB3 .
View 1 Replies View Relatedi have WRT610N v1.0 with latest original firmware but ftp upload speed and torrent download speed is terribly slow.
View 3 Replies View RelatedRegion : Italy
Model : TD-W8960N
Hardware Version : V4
Firmware Version : 67406
ISP :
I have problem on router td-w8960n v4 internet speed download is limited a 4 mb in device android e ios wifi connected for test i use application speedtest.net on ipad 3 and samsung galaxy s
I have a RCA modem from comcast high speed internet.Also have a Linksys Cisco Wireless-N Gigabit Router model # WRT310N V2. When I connect the internet directly into the computer, I get download speed up to 21.07 mbps and upload speed of 3.07. When I connect through the router download speed 1.31mbps and upload speed of 1.01.I have no clue how to make changes to the router.
View 19 Replies View RelatedI am getting very slow download speeds on my wireless router (Linksys model#WRT160N). I measured it on speedtest.net. with my ASUS laptop, ASUS Transformer Prime tablet, and 2 Ipod touches. All similar speeds.
Download avg: 1.30 Mbps
upload avg: 6.20 Mbps
I measured my desktop speed that is hardwired through the router to the modem.
Download avg: 30.00 Mbps
upload ave: 6.20 Mbps
I have scanned all the wireless connection in my area and found them to occupy channels 1, 6, 11. I tried changing my channels one at a time for all 11 channels. Some did a little better than others but not a lot.Also, if I by a dual channel router, can all wireless devices pick up on the 5GHz spectrim and if some, could this alleviate some interference?Is it possible that my router is going bad and a new single channel 2.4 GHz router will be fine?
I just ran some speedtests om my PC on the advice of my isp to see if my Linksys WRT54G router might be bad. As a result, I found that the router might not be entirely bad, but it might not be entirely good, either. I got .77 Mbps dowload and .17 Mbps upload on the first speedtest. I got .43 Mbps download on the second speedtest and the speed test hung hear the end. When I connected an IMac to the cable modem with an ethernet cable, the IMac ran strong. So the tech thought I should get a new router.
But wait a minute, isn't there a network adapter in the PC that the router talks to? Might the adapter be the problem, not the router? So I speedtested the wireless network to the IMac. That speedtest was fine, tiptop, like the ethernet direct connection test noted above. Did that tell me that the problem is in my PC network adapter, not the router? Then, I retested (speedtested) the connection on the PC and it was fine...excellent. Good up and down speeds, no hangs.Then, I checked the PC adapter (a Belkin). I saw three adapters on Device Manager, including the Belkin. I downloaded new drivers for the adapters (except for the Microsoft Virtual WiFi Minipoty Adapter - because it got a warning that the download software wasn't signed and might harm my computer).
I just upgrade my service with Comcast so I can now get up to 50Mbps, however the modem when directly connected to the PC can obtain these speeds, it does not when the PC is connected to the E4200 router. In fact the Cisco Connect speed test shows the upload speeds (10+ Mbps) to be faster than the download speed(4.82 Mbps). I upgraded the firmware to the latest level but it did not make a difference.
View 4 Replies View RelatedI have a tplink acess point TL-wa5110G . I have WISP ( wireless internet service provider). I have configured the acess point on wisp client router mode and wan type to pppoe gave the username and pwd..Now i want to share internet wirelessly. now my question is that can i connect the aces point to wan port of the wirless router to share internet wirlessly? Because i have seen the instruction figure in tplink access router where they have shown that u can connect it with with unmanage able switch to share it to wired lan.i want to ask can wirless works to share internet if i use wireless router to access point.
View 1 Replies View RelatedI have a Linksys E1200 router, which replaced a Linksys WRT54G wireless router. The WRT54G ran perfectly, but did not support wireless N, so I replaced it with the Linksys E1200. The router is physically located in a good spot, up high and centrally located in my house.Problem is, my download speed on my android tablet, xBox, iPhone is very slow, yet my upload speed is screaming fast.
Wireless: Ping: 30ms, Download 1.93Mbps, Upload 6.27Mbps.
Wired: Ping: 14, Download 17.88 Mbps, Upload 6.7Mbps.
I've changed channels on my router, changed channel width. Connection type is DHCP. My security is WPA2. I use the wireless MAC filter (allow only these MAC addresses access). No parental controls, I don't use port forwarding or triggering, and my firmware is up-to-date. why my speed changed from the older router to the newer router?
I'm paying for a 50 mbs connection. So what should I expect to have as a general connection speed? I know it changes depending on where you are and where your downloading from etc. But I have this old killxenos nic that might be restricting my download speed? Im getting about 3mbs. Ive gotta be able to get more then that right? Like don't tell me I'm paying for 50 but I only get 3.
View 5 Replies View RelatedAfter recently intalling the WMP600N wireless adapter I have had great trouble getting it working properly.
Current performance
- signal: verygood/ excellent
- download speed: ~1mb
- upload speed: ~2mb
- signal speed: 18-54mbps (lots of variance but never above 54)
Comparison to my laptop
Laptop in same location with wireless G capability
- signal: verygood/ excellent
- download speed: ~20mb
- upload speed: ~2mb
- signal speed: 54mbps
my router is a D-Link wireless N router I recieved from my ISP. I do not believe my router is to blame for this problem since I have a laptop with an inferior wireless adapter recieving 20X the download speed.Drivers I have installed the latest drivers for windows 7 and I am running windows 7 Ultimate 64bit.
Region : Romania
Model : TL-WDR4300
Hardware Version : V1
my Wi-fi card is an Intel Centrino 130N. When I connect to the Internet directly, the speeds I get are: DL: 11 MBs and UL: 9 MBs. (I know the difference between MB and Mbits). Although, when I'm connected through wireless, I get: DL: 3.4 MBs and UL: 4.7 MBs.how do I get my DL speed to be higher than the UL speed in wireless mode ? I read somewhere I have to disable QoS and WMM, but I simply can't find that option in the router's settings. even if I am in the same room as my router, when I check the status of the wireless connection, the maximum speed is 72 mbps. Should that be 130 mbps, as I run it in N mode, not G? How to improve that ? I have Win 7 and all the latest drivers and everything.
We recently did a forklift upgrade on our campus and installed 3502i's, 3502e's, and 11 5508 WLC's. Our students are complaining about slow connections in several areas of the campus.In our testing and basic trouble shooting our Apple laptops have no problems but our windows laptops are showing a very slow connection rates 264kbps downloand and 366kbps upload. The window device has current drivers installed.
View 14 Replies View RelatedAbout 2 months or so ago, my upload speed just pretty much stopped working. Nothing changed with my PC/modem/router, so I don't know what happened. My download speed is FINE, fast like it's always been(over 20 Mbps). I can upload a file maybe 500KB or lower, but it takes several minutes. If I try to upload anything bigger, it doesn't work(errors/gets stuck).
It's not my PC because I have the same problem on my tablet and ipod. It's not the router because I tested it by just hooking up the modem directly to my PC.
At speedtest.net, it just gets stuck on the upload test and never gives me results.
I rent my modem from Comcast. Should I just bring this modem in and get a new one?
How much faster is a T1 (1.5 Mbs) link vs. a 128Kbs link? Is it as simple as dividing one into the other which would equal roughly 11 times faster? What will this look like for the user who goes from 128K one day to a T!
View 1 Replies View RelatedAfter every attempt and changing of radios still download and upload was very slow.
View 1 Replies View RelatedI did a search and came across this board because I too am having the same issues with wireless connection. I went as far as buying a new router, which like the original post stated, worked well for a few and then stopped. It's frustrating because I need the wireless connection for many items I use at home.
View 2 Replies View RelatedI'm having really slow speeds surfing the internet, watching videos on sites like youtube, and downloading files. So i went to [URL] and found that my download speeds are only 1.3 mbps!! my upload is fine, around 5 mbps.I am wirelessly connected to the router, but the signal strength is fine.
View 2 Replies View Relateddownload is now 25.24 up is 3.97 should this be corrected?
View 1 Replies View Relatedam not a network expert but I understand that the download speed is always higher than the upload speed, right? I just bought a new internet package that comes with 5 mb/s download speed. The Upload speed should be around 1 mb/s right? Speedtest.net gives me 5 mb/s download speed and 53.62 mb/s upload speed. I called my internet provider and the girl told me it is normal. How can that be normal? I also have another weird issue. When I try to watch a video (youtube, netflix, etc...) the video starts loading correctly but stops loading after 10-15 seconds. I did a download test by downloading Itunes and the download starts correctly at 600 KB/s but after a 2-6 seconds, the downloaded megabytes stop increasing and download speed just drops until it reaches 0 and the download cancels itself.
View 6 Replies View RelatedI am facing with internet download speed reduced to 1/4th (500kbps) of promised speed (2Mbps).
ISP: Tikona India Type: Wireless unit at roof connected to PoE and ethernet cable
OS:Win7 and ASUS Express Gate I am using the ISP for over a year and was happy but for past 1 month got issues.
The first service engineer came and changed the poer adapter, clipped the ethernet LAN cable. The AI NET 2 utility in BIOS showed the pair 1-2 and 3-4 are short. So second service engineer changed the cable, power adapter and router.
I hoped that things will get resolved but still the speed was slower so the enginner unplugged the LAN cable from my desktop and checked the speed in his laptop. He was getting 2.5Mbps. Then I checked in safe mode with networking and asus express gate but still got reduced speed from 500 to 600kbps.
I had a NIC replacement so tested with that also and got same reduced speed.
since the AT&T is doing the cap I want to figure how much I use a month and see how much my online games use online.
View 1 Replies View RelatedWhen I bypassed the router and connect my pc to the cable modem directly, my download and upload speeds are over 20mbps/10mbps. But when I connect my cable modem with the router, it reduced dramatically to under 10mbps/5mbps.So the bottleneck is with the router. How can I troubleshoot the router to remove this bottleneck?
View 14 Replies View RelatedWe recently bought a home and just moved in. That being the case, we got a new ISP (Cincinnati Bell DSL). The service is advertised as "Up to 5Mbps."
My current equipment:
PC:
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
Other OS Description Not Available
[Code].....
So what can I do to achieve faster speeds? Am I limited by the hardware I have? My Dell is roughly 6 years old. Am I limited by Cincinnati Bell? Is it the location of the wireless router? Are there settings I can adjust to create a faster connection?
What would be the ideal download and upload speed for a server of more than 50 people ?
View 1 Replies View RelatedI just got installed a business class internet service installed. Got the 25/5 line and when I perform the speed tests I get well above that with the speed boost on the lines.When I am downloading large files I am getting a constant 22-25 down and when I am uploading files I get the 5 up.... But I can't do both at the same time.What happens if my uploads kill my download speed so if I am uploading a file and taking up my 5 up it makes my download speeds about 2-3.. Comcast is saying that this is how the network works and I just don't want to accept that at this time as I have other internet providers that don't work this way and I get a true up/down at the same time. Unfortunately at this location that I am dealing with Comcast is the only choice.
View 2 Replies View RelatedI have recently acquired a network connection of 100Mbps download and upload, and a dir 615 with dd-wrt.
I made all the connections and configurations , and everything seems to work fine it says it's connected at 300 mbps wifi, except it is not . I tested the internet speed and got this :
80 mbps Upload
35 mbps Download
I know that connecting via wifi will loose bandwith, the problem ins't that, I just cant seem to find the cause for the download rate to be less than upload and not equal... , when connected to the cable I get a stable 100/100.
I have a synchronous 10 Mb connection to my isp which I have conneted to a CISCO asa 5510. I have done a lot of testing and there is a very noticable difference in my upload/dowload speeds.When I connect a laptop directly to the Cable from my ISP's equipment and have the NIC set to autosense, I get similair results for Download/Upload Speeds I have tested and get 9 plus down and 8 plus up.When I either connect the asa directly to this cable and set to either 100/Full or autosense OR I place a non-managed switch in between the asa and the ISP's equipment My upload speed drops dramataically. The Download speed stays about the same 8 Mb Plus but my upload falls off the face of the earth drops to about a 1Mb. I have noticed this many times when I am going from a cisco 800 series router to a Cisco ASA.This is severely limiting my ability to perform replication out from my locale.
View 7 Replies View Related