i'm getting "general network error" while accessing application from server..
client machine: Windows 7
server machine: Windows 2008 server
Switch : 24 port unmanaged D-Link switch ..
network cable: CAT-5 cable.
I have a question regarding CSS loadbalancer. Let's say there are 2 vlans in CSS:
1. Vlan 10: 10.1.1.0/24 as external interface, interface where most of the clients are coming from.
2. Vlan 20: 10.1.2.0/24 for real server vlan.
Virtual IP 10.1.1.10 is created in CSS on behalf of two real servers (10.1.2.11 & .12) in Vlan 20. Client from Vlan 10 can http access to 10.1.1.10 successfully.
In Vlan 20 there's also few clients which need to access servers via virtual IP. Vlan 20 Client PC (10.1.2.101) can ping 10.1.1.10, but can't access 10.1.1.10 http service.
Is there any way for CSS to forward service request coming from Server vlan to be send back to the same segment?
I have a Cisco ASA 5505 with the base License. I want to split my network and add a new Internet Access, the first network in Orange works fine. My question is how can i access the file server from the second network (192.168.X.0 /24) ? The 3 switches are Cisco SF300-24P.
View 7 Replies View RelatedHow do you access an application that is in the server? Like what extra steps you gotta make? Are they software related or do I have to do some configuration on the router or switch? Heres a little example:
Assume you have a group of computer connecter to a switch, this switch is connected to a router which has the connection to your ISP. On the router, you also have connected a server farm for your network and all the apps are stored there, say MS Word, Excel and such.Now, you have your network running, every ping comes out successful, so you know you did that part right, so the next part is to get the host use the MS Word or any other app in that server. How do you do that? Is there something that need to be configured on router/switch or is it with a software on your host? If its a software, whats the name of it and how you make it work?
We are a new call center company and want to configure the network to setup the predictive dialer, work properly.how a network could be setup to configure predictive dialer.
View 2 Replies View RelatedI am new to the ACE30. I a basic configuration from the CLI and I am trying to use the device manger. I am able to get to the web informational page rather then accessing the login page. I have rest the password for both the admin and www and still no go. my question is how to go into enabling the GUI access.
View 1 Replies View RelatedIs there a way to convert TCP options header into an http header using Cisco ACE ? is there an equivalent solution with Cisco as the one proposed by F5 here: url.
View 7 Replies View RelatedI've got basic connectivty to our ACE30 module and when I try connecting to the management IP address (attached to the Admin context), I see a very basic GUI which only lists the CSM to ACE config conversion tool. I don't see a GUI as detailed in the document: url...How do I get the ACE Applicance Device Manager GUI working so that I can then configure real servers, serverfarms etc rather than via the GUI?Having read through copious amount of documentation I can't seem to find a refrence that would ne useful here. This should be a fairly straight forward exercise - do I need to install some other software to get the full fledged GUI working?
View 2 Replies View RelatedWe are using acs version 4.2.0 build 124 on windows server 2003. Our domain controller has been upgraded from 2003 to windows 2008 R2.Now we are facing following error in ACS authentication for accessing our devices.Error: AUTH 06/09/2012 11:55:40 E 1810 3316 0x8f21 External DB [NTAuthenDLL.dll]: Windows authentication FAILED (error 1326L)if we restarted services of ACS server then users get authentiated fine.
View 1 Replies View RelatedWe are working on a new site which is hosted on Rackspace. http:[url]....For some inexplicable reason we have intermittent connection problems when trying to access this site and the wordpress backend. We're able to access it for an hour or two and then it becomes unavailable and this can be for an hour or more. During those time we get an "Error 101"Error 101 (net::ERR_CONNECTION_RESET): The connection was reset.This problem is almost certainly unique to our location / ADSL connection.
We've had people at other locations check at the same time as we cannot access the site, and at that same time they can. We've also checked out the site using the 3G network and it's accessible when we're having problems from our ADSL connection.We have tried using fixed DNS addresses (Telecom's, then Google's and then Open DNS) We have binned the Dynalink RTA1025W ADSL Modem thinking it was an issue with the modem. We tried the standard Thomson Telecom Modem but that caused even more problems (binned that one too.)
We have now installed a new Linksys WAG160N but we have the same issue (but a prettier modem)Discussions with Telecom Support have been fruitlessWe connect (in case it's not already obvious) via Telecom ADSL network. I'm based in Manly, Auckland NZ. Our connection is otherwise fine although we have noticed on some of our devices recently that Facebook and Google.co.nz are unavailable for a short time. Often coming right within 30 seconds or so. This may be related.The domain name Travelcafe.co is registered with GoDaddy. I'm about to move it to Rackspace as well. (Rackspace think not, but I'll do it anyway to keep things clean.)
i'm currently studying at a college which has a website with a student intranet that is available to log in from any computer. So far it has been working well and I can log in on my home laptop and upload documents and look at presentations etc. Today for no reason when I try and log in I get the message Error Code 500: Internal Server Error and the webpage does no appear.I have had no problems previously and this has only happened today and yesterday, I went down to the college and accessed the website fine from the computers in the library but still no joy from my home computer.
View 1 Replies View Relatedmy laptop is re-staring when access the server
View 1 Replies View RelatedI have a Windows Home Server v.1 I set it up nearly a year ago, and everything runs fine.I have 3 different user accounts that are password protected.On my PC, i have been running Windows 7 and using the server as my My Documents folder.I recently installed Windows 8 Consumer Preview on an old Hard Drive, and i can't seem to access any folder on the server that isn't already given public permission. Whenever i try to access my User folder i get an access denied message, but no prompt to enter a password so i can use it.
View 3 Replies View RelatedI put multiple rservers in multiple server farms?
So for example rserver1 and rserver2 are put in serverfarm production1 and are in use with particular sticky and load balancing settings.
Can I then create serverfarm test_production and put both rserver1 and rserver2 in it? Then play around with the sticky and load balancing settings as a test without affecting the production serverfarm.
I'm trying to design a CSS configuration that allows servers in the same vlan to be the source and destination of load-balanced traffic. My thought is to add two new vlans, one for the VIPs and one for the servers, then NAT the source IPs going from the LB to the servers.
Is this the right way to do it?I've never NATted using CSSs, so I wanted to verify what I'm thinking.Our current config trunks the vlans -
interface 1/1
trunk
vlan 1
default-vlan
vlan 555
[code]....
I get stuck in a problem,What can be the reason for not working my configuration or any other reason that can be .
[CODE].....
Is this possible and if so what commands do i need to configure on my ASA 5510 for it to work.I have two web server within my DMZ and i want to access the outside url of on on the web server from the other. Currently i can access the internet from both webserver server but not the url form either webservers.
E.g. config
webserver 1 https://xxxxxx.xxxxxxx.com ---> public ip---> dmz ip
webserver 2 https://xxxxxx.xxxxxxx.com ---> public ip---> dmz ip
I have a router and a server that are connected through two unmanage switches. The router has DSL service in it and I want to access the internet on the server but I can't. The two are in the same network and it is a static IP network. I can ping the router from the server.
View 36 Replies View RelatedI recently bought a personal laptop that I'd like to use at work. It came with Windows 7 Home Premium installed and because of that, I can't join it to the Windows Server 2003 domain we have. I don't really need to print or any of the other things that go with being on the domain, I just need access to a few key folders. Is there any way to access shares on the server with Win 7 Home?
View 2 Replies View RelatedI am having some trouble understanding extended control lists. I am trying to prevent a certain host on LAN1 from accessing a server on LAN2, while still allowing the host access to the rest of LAN2.This is what I thought the command should be:
access-list 100 deny ip 175.16.1.2 0.0.0.0 175.17.2.2 0.0.0.0
My understanding was that:
Green = source & mask
Red = destination & mask
However this seems to stop all my other hosts on LAN1 from pinging the server also.
I cannot seem to see my server behind a cisco router. I have a feeling it is because our network phone system may be robbing the IP address?We have two fixed IP addresses.The first one, is assigned to the router.We have two swtiches set up behind router and all the other network stuff interanally wrks great.We also have full internet access. When I type the IP in on the web, it accesses the talkswitch phone system.I have set the internal IP to the server as fixed.I have port 21 open for FTP.When I run a test, the internet sees port 21 open. However, I cannot seem to cal lup the server over the internet. Could the talkswitch system somehow be interfereing with the logon?What would the proper syntax be to access the server?
View 3 Replies View Related active# sh running-config
: Saved
:
ASA Version 8.2(5)
!
hostname active
domain-name dhalahore.org
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code].....
We have a ASA5510 with a webserver in the DMZ network 10.2.2.0/24. We now want this web server to be able to access the Exchange server in the Inside network 10.1.1.0/24. I researched this and it seemed straight forward according the the Cisco document below:
[URL]
I'm looking to do this with smtp so I added these lines to the config:
static (inside,DMZ) 10.2.2.30 10.1.1.11 netmask 255.255.255.255
access-list dmz extended permit tcp host 10.2.2.2 host 10.2.2.30 eq smtp
The configuration line:access-group DMZ in interface DMZ Already existed in the configuration so didn't need to be re-entered.
ASA Version 8.0(4)
!
hostname xxxx
domain-name xxxx.com
enable password xxxxxxxxxxxx encrypted
passwd xxxxxxxxxxxxxx encrypted
names
[code]....
I have Cisco ASA 8.0(5) and I need to block specific url to acees my https server in dmz ?I read about websence technology, but I think it's not free right? Also I read abotu policy inspection map's but in my case is HTTPS not http ..
View 1 Replies View RelatedI have a VPN connection to my office network. The VPN connection appears to work fine as it connects and logs me in successfully. In the connection box I have to provide a domain and my username to log in. Once the VPN is connected I am then able to ping my office computer as if I was on the same network. That is great. The problem is that there is a server on that network that defines a bunch of A records for web applications we are working on and I can't seem to hit any of those from my home computer, even though I can at work. If I remote into the office PC and navigate to these addresses they work fine. I also know that my co-worker can hit these a records from home so it has to be something I'm doing wrong.
[Code]....
We have ASA5520 and we want to configure a VPN IPSEC profile so that a partner of ours can access only a server and only on HTTP port.I've tried configuring split tunneling with an Extended ACL but probably I'm missing something. I just configured the ACL so that it included any source to our server's IP on HTTP port but when testing, it didn't work.
However, if I configure a Standard ACL on the split tunneling I can access the server and all the services it provides.Do you know if I'm missing anything on the Extended ACL configuration?
Should I configure this any other way?
Upgrading a 4710. This is a brand new ACE out of the box and I have tried to upgrade a couple of times but get the same error... Here are the details:
switch/Admin# copy ftp://10.0.0.1/c4710ace-t1k9-mz.A5_2_2.bin image: Enter the destination file name[]? [c4710ace-t1k9-mz.A5_2_2.bin]
File already exists, do you want to overwrite?[y/n]: [y] y Enter username[]? ace Enter the file transfer mode[bin/ascii]: [bin]
Enable Passive mode[Yes/No]: [Yes]
Password:
Passive mode on.EXT3-fs error (device hdb2): ext3_new_block:
Hash mark prinAllocating block in system zone - block = 163843ting on (1024 by
Aborting journal on device hdb2.
EXT3-fs error (device loop3) in start_transaction: Journal has aborted
EXT3-fs error (device loop3) in start_transaction: Journal has aborted
EXT3-fs error (device loop3) in start_transaction: Journal has aborted
[ code]......
And it keeps going on with this message. I also tried tftp and I get the same thing:
EXT3-fs error (device hdb2): ext3_free_blocks_sb: bit already cleared for block 6147
EXT3-fs error (device hdb2): ext3_free_blocks_sb: bit already cleared for block 6148
EXT3-fs error (device hdb2): ext3_free_blocks_sb: bit already cleared for block 6149
[code].....
I am facing a problem while updating the SSL certificates in ACE 4710. Our certificate is expired and we have purchased a new certificate from CA. Moreover the common name of the certificate is also changed.
I tried importing the certificate to the repository and change the SSL proxy likewise to use the new certificate. but still the new certificate with new CN is not recognised by the clients. they can see the old certificate only. I even tried deleting and creating a new ssl proxy service with the new cert and attaching it to policy map.
We are trying to upgrade throughput on ACE appliance 4710, getting below mentioned Error. We got license file from Cisco first license is for 0.5 to 1g, 2nd 1g to 2g and 3rd one is for 2g to 4g.
Our environment is critical, hence we are doing upgrade on Secondary appliance first. for that we are first isolating Secondary appliance by disabling up link switch port.
ACE-Shared/Admin# license install disk0:ACE20121016124306914.lic
Installing license... failed: Can't install this license with the current count
[code]...
Cannot turn off my windows firewalls on my vista toshiba after removing a scam Vista antivirus spyware download.. Cannot access any ports,Whenever I try to open a web browser, my disk defragmentation, ccleaner
View 1 Replies View RelatedI've configured WCCP2 on my ASR1002/ESP2 and works fine. But got error log since I changed redirect ACL entries. Check on Cisco seems it a known bug?[URL] And seems any change on WCCP not take affected anymore. Even I removed all WCCP configure on my router, but my cache engine still got the redirected packet!?
Aug 8 22:41:00 CST: %FMFP-3-OBJ_DWNLD_TO_CPP_FAILED: F0: fman_fp_image: Batch type 6 ID 0 download to CPP failed
Aug 8 22:41:30 CST: %FMFP-3-OBJ_DWNLD_TO_CPP_FAILED: F0: fman_fp_image: Batch type 6 ID 0 download to CPP failed
Aug 8 22:42:00 CST: %FMFP-3-OBJ_DWNLD_TO_CPP_FAILED: F0: fman_fp_image: Batch type 6 ID 0 download to CPP failed
Aug 8 22:42:30 CST: %FMFP-3-OBJ_DWNLD_TO_CPP_FAILED: F0: fman_fp_image: Batch type 6 ID 0 download to CPP failed
[code]....
When trying to view the status in the Monitor tab and the Config tab after you log in to the ACE 4710 Device Manager A5 (1.2) management GUI tool, I could not retrieve the status data and the following message appeared.
"Faild to upload Adimn configuration: There is error in loading configuration: Error in loading RMO config from DB:The given index XXXXXXXXX.bak does not match table index definition"
Other features include all normal, so I can get information by using the CLI.In addition, this configuration is redundant in the Primary / Secondary, this event occurs only on the Primary.
Other:-XXXXXXXXX.bak is a backup that you created in the checkpoint, and it does not already exist.
-When I'm logged on to the GUI, the above message is displayed in the status bar always.
-It was not recovered by ACE restart it.
-When I try to create the same configuration in a different environment, it did not reproduce.
I am wondering if all routers that have a USB port to which network storage can be attached, support the functionality to enable that storage to be accessed from outside the network. If this is true how (in a conceptual sense) can the router be configured to do this and what are the security implications?
View 2 Replies View Related