Cisco Application :: ACE 4710 Device Manager ERROR In Loading Configuration
Nov 20, 2012
When trying to view the status in the Monitor tab and the Config tab after you log in to the ACE 4710 Device Manager A5 (1.2) management GUI tool, I could not retrieve the status data and the following message appeared.
"Faild to upload Adimn configuration: There is error in loading configuration: Error in loading RMO config from DB:The given index XXXXXXXXX.bak does not match table index definition"
Other features include all normal, so I can get information by using the CLI.In addition, this configuration is redundant in the Primary / Secondary, this event occurs only on the Primary.
Other:-XXXXXXXXX.bak is a backup that you created in the checkpoint, and it does not already exist.
-When I'm logged on to the GUI, the above message is displayed in the status bar always.
-It was not recovered by ACE restart it.
-When I try to create the same configuration in a different environment, it did not reproduce.
View 2 Replies
ADVERTISEMENT
Aug 18, 2011
I am getting sync fail on device manger A3(2.2) to ACE 4710 appliance when I am changing certificate in one of proxy service.
View 1 Replies
View Related
Nov 4, 2012
In a cluster of redundant ACE-4710, version A5(1.2), the graphical Device Manager on the primary ACE cannot authenticate users. An error message is displayed :The strange thing is that the standby ACE Device Manager work correctly. Moreover, both ACE are perfectly synchronized :
CH01AC03/P-115-A# sh ft group summary
FT Group : 14
Configured Status : in-service
Maintenance mode : MAINT_MODE_OFF
My State : FSM_FT_STATE_ACTIVE
My Config Priority : 200
[code]....
View 2 Replies
View Related
Sep 28, 2011
I have a problem in the ACE 4710. In view of the connections of a web environment. When I view connections on Config> Operations> Real Servers, Conns column values appear very high connections (Example. 1606317769078).Already in Config> Operations> Virtual Server the number of connections appear normal. Version 4710 ACE Device manger A4 (2.1a)
View 1 Replies
View Related
Sep 6, 2011
I've got basic connectivty to our ACE30 module and when I try connecting to the management IP address (attached to the Admin context), I see a very basic GUI which only lists the CSM to ACE config conversion tool. I don't see a GUI as detailed in the document: url...How do I get the ACE Applicance Device Manager GUI working so that I can then configure real servers, serverfarms etc rather than via the GUI?Having read through copious amount of documentation I can't seem to find a refrence that would ne useful here. This should be a fairly straight forward exercise - do I need to install some other software to get the full fledged GUI working?
View 2 Replies
View Related
Mar 17, 2013
I need to setup new ACE 4710 device , after referring to "Establishing a Console Connection on the ACE" i had managed to set up initial console connection. During installtion i had configured vlan (default vlan 1000) , interface ip adess& subnet mask.
Post initial config i understand i should be able to open' Device Manager GUI Login Window' but it is not opening.I also need inputs on setting 4710 for the telnet connection
View 4 Replies
View Related
Apr 29, 2013
Upgrading a 4710. This is a brand new ACE out of the box and I have tried to upgrade a couple of times but get the same error... Here are the details:
switch/Admin# copy ftp://10.0.0.1/c4710ace-t1k9-mz.A5_2_2.bin image: Enter the destination file name[]? [c4710ace-t1k9-mz.A5_2_2.bin]
File already exists, do you want to overwrite?[y/n]: [y] y Enter username[]? ace Enter the file transfer mode[bin/ascii]: [bin]
Enable Passive mode[Yes/No]: [Yes]
Password:
Passive mode on.EXT3-fs error (device hdb2): ext3_new_block:
Hash mark prinAllocating block in system zone - block = 163843ting on (1024 by
Aborting journal on device hdb2.
EXT3-fs error (device loop3) in start_transaction: Journal has aborted
EXT3-fs error (device loop3) in start_transaction: Journal has aborted
EXT3-fs error (device loop3) in start_transaction: Journal has aborted
[ code]......
And it keeps going on with this message. I also tried tftp and I get the same thing:
EXT3-fs error (device hdb2): ext3_free_blocks_sb: bit already cleared for block 6147
EXT3-fs error (device hdb2): ext3_free_blocks_sb: bit already cleared for block 6148
EXT3-fs error (device hdb2): ext3_free_blocks_sb: bit already cleared for block 6149
[code].....
View 7 Replies
View Related
May 17, 2012
I am facing a problem while updating the SSL certificates in ACE 4710. Our certificate is expired and we have purchased a new certificate from CA. Moreover the common name of the certificate is also changed.
I tried importing the certificate to the repository and change the SSL proxy likewise to use the new certificate. but still the new certificate with new CN is not recognised by the clients. they can see the old certificate only. I even tried deleting and creating a new ssl proxy service with the new cert and attaching it to policy map.
View 2 Replies
View Related
Nov 4, 2012
I did a clean install of windows 8 and my tooth application or drivers do not show up in device manager dell xps studio 7100.
View 1 Replies
View Related
Oct 26, 2012
We are trying to upgrade throughput on ACE appliance 4710, getting below mentioned Error. We got license file from Cisco first license is for 0.5 to 1g, 2nd 1g to 2g and 3rd one is for 2g to 4g.
Our environment is critical, hence we are doing upgrade on Secondary appliance first. for that we are first isolating Secondary appliance by disabling up link switch port.
ACE-Shared/Admin# license install disk0:ACE20121016124306914.lic
Installing license... failed: Can't install this license with the current count
[code]...
View 4 Replies
View Related
Jan 15, 2012
The installation of an ACE-4710 throughput upgrade license licence (ACE-AP-02-UP1) failed with an error message :CH01AC03/Admin# license install disk0:ACE20111213081741975.lic.Installing license... failed: No space left on device. [code]
View 4 Replies
View Related
Jan 22, 2013
I have Ace 4710 version A4.1.1 and I am experiencing interesting problem with GUI and SSH reachability. I am unable to connect to management vlan3000. Interesting is that I can ping from ACE to network but unable to ping or SSH or HTTPS to ACE. Everything seems good. ARP is ok, switch is OK, line is up, protocol is up. Management is enabled for icmp, https, ssh to any.
When I do show interface I noticed line Config download failures : 9.
Hardware type is VLAN MAC address is 00:1e:68:1e:bc:db Virtual MAC address is 00:0b:fc:fe:1b:01 Mode : routed IP address is 10.168.0.18 netmask is 255.255.255.128 FT status is active Description:Management VLAN MTU: 1500 bytes Last cleared: never Last Changed: Mon Jan 21 16:48:54 2013 No of transitions: 5 Alias IP address not set Peer IP address is 10.168.0.19 Peer IP netmask is 255.255.255.128 Assigned on the physical port, up on the
[Code] ....
View 7 Replies
View Related
Sep 27, 2010
We are replacing CSM modules with 4710 appliances. Is there a config conversion tool? Have not seen it in any Cisco documents.
View 3 Replies
View Related
Jan 22, 2013
I am configuring a load balancer from cisco, a ACE 4710.Load blancing is completely new to me, and i am unexpereinced in this field. It has to be configured for a customer that want to load balance HTTP and RTSP traffic over 4 application servers (Back-end),I searched alot on google for possible solutions, and got RTSP in some way to work, but http wont work says my customer.
[Code] .....
View 3 Replies
View Related
Oct 20, 2009
I have two ACE-4710 in active/standby mode, running code A3(2.2). Four contexts are configured. Both devices were functional without problem, until I reload the standby unit. After reload, the standby unit completely lost its configuration with exception of the FT vlan and the FT peer configuration in the Admin context... Both units recognized each-other and I can still ping the primary unit on the FT vlan, but nothing else. Contexts are lost and interfaces are shutdown! Nothing changed at the software level, both devices run exactly the same image and the same licences are installed (it worked well before the reload).
So, I decided to reconfigure the basics on the standby unit in order to trigger a config sync from the primary. And here arrives the problem : I reconfigure the FT vlan, the FT peer, I check the peer state and everything is OK.
Then, I try to ping the primary unit from the standby unit with success :
switch/Admin# ping 192.168.16.1
Pinging 192.168.16.1 with timeout = 2, count = 5, size = 100 ....
Response from 192.168.16.1 : seq 1 time 0.000 ms
[Code]......
View 3 Replies
View Related
Jun 25, 2012
I am looking at management (backup of the configuration) of the ACE 4710 running A4.1, the management software is Cisco Cirrus. The question I have is around the management of the context's, I have a backup of the Admin but would like the user context's also, how this is completed.
View 3 Replies
View Related
Apr 16, 2012
Have two ACE 4710 in HA setup. We would like to setup HTTPS loadbalance(actually just a primary and standby configuration in the serverfarm). Initially this would be for Exchange OWA connections but may expand to more HTTPS connections later. I know there are several ways to do SSL with the ACE( client, server, end-to-end). I am just wanting to know the easiest way to deploy this? Is a certificate always needed on the ACE for each connection? In HA mode would a certificate be needed for both or does it replicate in some way to the other ACE?
View 6 Replies
View Related
Aug 31, 2011
I have been tasked to provide SSL(HTTPS) access to a server farm that will be accessible from the internet. Is this the correct guide to follow?
[URL]
I am assuming I will need to purchase a certificate to import into the load-balance r as well.
View 1 Replies
View Related
Oct 15, 2011
I want to use one arm infrastructure of ACE4710. But I remember it was problem for back end server can not get logging for which client/ip address access the web server.
View 3 Replies
View Related
Mar 27, 2013
Report run via Individual Web server URL’sThe report takes less than 20 minutes (average 15 minutes) to fetch and return the data. This is observed 9 out of 10 times.Report run via ACE Load Balanced URLThe report keeps on running for more than 20 minutes and never completes. The front end keeps showing report is running.The data in general when tested directly by running queries against the database (bypassing the platform) completes in 15-18 minutesThe network connectivity for each and every ports involved (Loadbalancer/Servers) have been throulgly checked.
View 6 Replies
View Related
Aug 10, 2012
I have a cisco 2821 router and it has an advanceip image in the flash each time on reboot it gives the message software forced crash and checksum error and finally goes into rommon. i tried xmodem and tftpdnld -r but same problem persists. I even changed the CF with a working router's flash but the same problem occurs.I also loaded an ipbase image of about 13Mb size and all the same problem repeats with it .
View 1 Replies
View Related
Oct 23, 2012
Having troubles loading a certificate in System security/802.1X Supplicant. I tried to upload *.car and *.msc certificates, but the device aborted the upload at each attempt.
View 2 Replies
View Related
Mar 21, 2012
I'm working on a small scale Cisco WAAS deployment. I want to know if it's possible to use the entry level Cisco WAVE-294-K9 as Central Manager.Also about licensing, does this appliance model come with the enterprise level license
View 2 Replies
View Related
Jul 30, 2012
I would like to use the Cisco ATA 186 as a SIP device with Cisco Call Manager 7. However, I have found that the SIP firmware for the Cisco ATA 186 is unsupported by Call Manager 7.Therefore, In order to use the ATA as a SIP device with the Call Manager, I believe I will need setup the ATA as a 3rd Party SIP device by doing the following:
1. Disable the TFTP option within the ATA, so that the SIP firmware is not overwritten by firmware from the TFTP server.
2. Install the 3.2.1 SIP firmware on the ATA, since the ATA is currently running the 3.2.4 SCCP firmware.
3. Register the ATA, as a third-party SIP device, with the Call Manager .Should I register the ATA as a 3rd party device?
View 2 Replies
View Related
Dec 4, 2011
I have a XFX Nforce 750a SLI mobo and reinstalled winxp pro and now Im missing the network adapter in device manager. I have a wireless pci card installed and can find that under hidden devices in D manager but no onboard! I do have yellow ? for other devices and yellow ? for everything in there:[CODE]
View 2 Replies
View Related
Apr 21, 2012
I was trying to fix a diagnosis error under my Internet Connection stating your computer appears to be correctly configured, but the device or resource (DNS server) is not responding. I thought maybe going to Device Manager while showing hidden files selected then go to non plug and play, and then I deleted NetBT, and then a PC reboot. I was very wrong because I have no Internet, and honestly, I only have one PC.I have Windows 7 Home Premium Anytime Upgrade that I bought. It's a 32-bit OS.
View 7 Replies
View Related
Feb 10, 2011
In my laptop WLAN is showing disabled from Device Manager & no Wireless is showing in the Network Adaptar under Device manager.
View 5 Replies
View Related
Apr 20, 2011
I just recently got the internet and I have a desktop computer that has ever rarely been used and it has never had the internet on it. I called tech support of my ISP to see what many be the problem why I can't connect to the internet and found that the source of the problem was I do not have a LAN network connection. When I open Network Connections on the computer, nothing is there. I also went to device manager and there is nothing there for Networking. Under category of "Other Devices" in Device Manager there is a question mark next to "Ethernet Controller". Are there drivers or something I need download to fix this so I can connect to the internet via a DSL connection.
My computer specs are:
Windows XP Professional
Version 2002
Service Pack 2
[Code].....
View 2 Replies
View Related
Feb 18, 2011
Next to network adaptors there are yellow marks in my device manager...as follows.
-??(yellow mark) Other devices
-??? (yellow mark) Unknown device
-??? (Yellow mark) Unknown device
View 1 Replies
View Related
Aug 23, 2012
i cant find Ports (COM & LPT) in device manager . so how can i change that setting?
View 1 Replies
View Related
Aug 7, 2011
I'm running v4.3.5 in our WAAS environment. At the CLI of one of our 7341 WAEs, there are several connections that show up [code] However, in the Central Manager nothing shows up - not even empty graphs - when I click on a device and go to monitor/connections statistics. After a few minutes, I do get an error message that states "Error retrieving connection stats. Please ensure that the device is online and then refresh." By the way, I get all other statics in the GUI such as Optimization Details Report, Traffic Summary Report, etc. Another thing, these WAEs are behind a router and supposedly the ports to allow access to/from the WAEs and other data is allowed through the firewall.
Is there some special port that needs to be opened on the firewall to allow for 'connection statistics' information displayed, that doesn't need to be opened for the other statistics to display? Or could this be a bug in the software?
View 1 Replies
View Related
Nov 16, 2011
this is a device discovery issue with LMS 3.2. The devices added up in Common Services are not getting reflected under Campus Manager and Device Fault Manager. The devices are manually added and are stack switches (2960S-24TS-L).
View 1 Replies
View Related
Mar 27, 2012
regarding device package for Cisco MCS 7835-I3 [Cisco 7800 Series Media Convergence Servers] . I have added Call manager in LMS 3.2.1 but showing ? as there is no device package installed in LMS.
View 2 Replies
View Related
