For some weeks I have been trying to pair my Samsung Galaxy S2 with my Lenovo Thankpad SL500. The consistent message is "Unable to pair with [laptop]. Incorrect PIN or PASSWORD.
Well which is? PIN? or PASSWORD? - or does the system not know, so it's taking a guess? If it doesn't know, how can I possibly know?
Having read many articles about his on the www, I am still none the wiser as to what is causing this. What's wrong with the PIN or PASSWORD - is it too hot, or too cold? Wrong font face, colour or size? Wrong latitiude, longitude or elevation? Wrong time of day or month? Are the auspices in general not favourable? Am I facing in the wrong direction as I type? Have I chosen the wrong weight/color of paper for my printer? Is my body odor unacceptable? Is the length of grass in my lawn not quite right? Oh, the number of options is so large - where does one start?
Oh, and before I forget - assuming I can find what constitutes a correct PIN or PASSWORD, where does one set it? btw pairing this phone with the media player in my 10 year old car works immediately and flawlessly!
I need to connect my laptop with android phone thru Wi-Fi. I have created ad hoc WEP connection in my laptop. Now, the signal strength in my laptop Wi-Fi shows "no signal". Therefore , my phone is not detecting the ad hoc connection which I have created.
I setup an accespoint on my laptop. Now I want to connect my Phone (android) to this network but, he is asking for an Ip-address I tried the following;
Unfortunately, despite my best efforts to find a better alternative, where I live my only option for unlimited internet with any speed whatsoever is to tether my DROID DNA phone to my computer using the app PdaNet. I've been doing this for over a year now without any problems.I have an unlimited data plan through Verizon and although I only have 3G at my house, it is still far better than anything else I've found.
Recently I started playing the online game World of Warcraft. Obviously the speed isn't ideal, but it worked perfectly fine for about 3 weeks. One night the game started to get really slow and after a minute or two would freeze up entirely. When this happened, I would have an error message on my phone at the PdaNet screen that read "Communication with client has been broken." Despite restarting things, this continued to happen. I assumed that it was because the weather was bad outside, but the problem didn't go away the next day. When I noticed that my internet speed when browsing the web had slowed down as well I figured that although I supposedly have unlimited data, that Verizon must have slowed me down for crossing over a certain download barrier. I've heard that they do this.
So this went on for the next week until the first of the month when my data was reset through Verizon. Well I'm still having the same issue when trying to play the game. It will work alright for anywhere from 30 seconds to 10 minutes, and then all of a sudden start to get slower and slower until it freezes completely and I have the "Communication with client has been broken" error screen on my phone. I'm not sure if my internet speed in general is back to normal or not because I haven't spent enough time online to know for sure, but at the moment it seems to be.
i've got remote desktop and it is amazingle useful.know of an app that lets me link into shared devices on my windows 7 p from my phone? I want to be able to access my hdd without having to be using remote desktop.
I received my upgrade yday from shop. I'm using galaxy 11s but have now galaxy 111 x my 11s is still connected to fone as hubby got it but I can't get wifi on new fone x iv sky broadband. does it take 24 hrs or what's wrong.
I am trying to connect to my office wifi which uses a proxy server. Scenario 1: I am using Samsung Bada (wave 1), connected to the internet successfully and also any applications that require an internet connection including Samsung's app store. While, connecting via open networks like home wifi and other friends' wifi also worked without any issue. Scenario 2: Now I also have an android based Galaxy pocket: even after entering all the required proxy setting as mentioned above, I can access websites via browser but cannot access samsung's app store, google's play store, skype, sipdroid etc. I know it is nothing to do with the network administration as I am still accessing via my samsung wave but not via android. Is there anything like a network profile I need to assign for these applications?
I have time warner cable, they have a service where you can watch TV on your hand held devices.. Only issue is, you have to be on your home network. since thats fairly pointless since if i am home i am watching the 60 inch... i was trying to use VPN to get inside of my network to effectivly fool the app to thinking i was on my home network.
I have installed the Phone Remote software [URL] on the torch and playbook but am not able to pair them together.The FAQ's and directions have been followed painstakingly but have not any success. My router is knowledge is basic but read through the manual and have been searching the net for answers. I have uPNP enabled and no firewall.
My Dir-615 E1 5.01 works fine, daughters Iphone, laptop connect fine. My Droid Max android phone connects with no problem but does not load web pages or sites. Phone does work great at other wifi spots just not at home with this DLink. My last android phone acted the same way, cannot use wifi at home! Not a password issue cause it does connect and has strong signal.
I have just gotten a new touch phone that has wifi. and i wanna use it through my dlink dir-825 router. My phone is the nexus s with 2.3 andriod OS.The problem is that my phone can see the 2.4 ghz connection it just keeps reporting "deactivated" i did acess other wifi and used the internet over a router. So i know the phone works.
So my question is: 1. Can i make my router ONLY be in 2.4ghz mode, if so, can you link or explain it?
I recently purchased a Cisco RV180W VPN router and would like to enable the VPN (specifically IPSec) capabilities so that I can connect via my Android 4.0 (Samsung Galaxy S3) phone. I need step by step instructions (I'm quite unfamiliar with Cisco routers) to configure both the router and my Android phone to do this. I've actually been able to configure the RV180W to work with PPTP (and connect via my phone with PPTP), but would prefer to use IPSec.
I have a samsung galxy 5 phone.. with ANDROID 2.1 installed in it.. I wan2 access internet thru wi-fi on my mobile. I have got myself a wireless router at home. the wi-fi settings page of my phone says that i am connected to the network i wanna connect to... but when i try 2 access any website thru d browser , it displays page not found..
I've got a Samsung Epic 4G and whenever I leave the wifi connected on my phone at home, it seems to never go into sleep so the battery drains overnight doing nothing. If I turn off wifi and leave it on the 3G network, battery barely drains at all. Is there something in my router that could be keeping my phone awake when it's connected. I've tested it on a friends wifi network and my phone sleeps just fine, it's only when I'm connected to my DIR-655.
I have CUWN, WLC 5508 is installed and APs are 1142. Network is working fine but I am facing the problem with Android phone which are not browsing for internet.
Android phones connectes with wi-fi, it takes IP from DHCP well, which is pingable from any node of network. even I got be GUI of WLC on Android, but when it goes to browes for internet the message displayed " Page cannot be disply".
In same scenario if configure the Public IP on Android Phone (Via DHCP or Static) then it runs the internet smoothly.
I did an upgrade to my firmware on the x2000 dsl router and now i cannot download apps with my android phone, i have tried everything that i can think of.
My samsung galaxy phone with android os connects to the weak signal of the far away router in stead of connecting til to range extender close by.Signal from extender is strong but the phone seems to have problems in obtaining the IP addres from the extender.Have returned to factory settings and made new setup - but still the same problem, and only with connecting tilthe Xyzel range extender 2205?
i am having LAN connection to my laptop with registered in main data base, so i can't use my mobile using a same username to WiFi.Bluetooth/ USB connection between Laptop lan Internet to my Samsung Galaxy i551 android 2.2 mobile, so that i can access internet in my mobile without WiFi registration.
We have a pair of N7K distribution switches connected to a pair of N7K Aggregation switches.We run vPC on both pairs of n7k's.
-n7k-d1 has two interfaces in a Port-Channel connecting to n7k-a1 & n7k-a2. (PC1) -n7k-d2 also has two interfaces in a Port-Channel connecting to n7k-a1 & n7k-a2. (PC2)
My problem is that Spanning-Tree is blocking PC2 and all traffic from n7k-d2 is traversing the Peer-Link before reaching the Aggregation layer. Is this the best design for connecting two pairs of n7k's with vPC or if a better design would be to connect all 4 links into the same Port-Channel and vPC?
I've got a router on which I run a backup/media/print server, a couple of computers and a voip box. My router has only four ethernet lan sockets which are thus all occupied by the above, but I need to attach at least one further device b
Secondly, could a splitter such as >> this one << do the job? I'm guessing this basically split a single 4-pair ethernet connection into two 2-pair ethernet connections.
My laptop has recently not been able to connect to the internet through my wifi connection. My desktop is fine though it can connect to the internet on the same network, and I have my wireless router connected to my desktop. I thought it was just my laptop having a problem (possibly a virus) but then I noticed that my smartphone is having the same problem of being able to connect to the network but not connecting to the internet.So is there something up with my router?
I recently got an access point to extend the wireless range in my house. It is a Netgear WN802T. The long and short of it is, it works fine, i configured it succesfully, it reaches the main router and gets an IP address from it. My laptop connects to it fine without fuss. However, my phone (HTC Desire HD) and tablet (Motorola Xoom) are unable to connect.They can 'see' the access point, but when i connect and put in the passcode, it get's stuck on 'scanning' or 'disconnected'. I've tried turning certain settings on and off, i've tried taking it out of G/N mode and taking it down to B/G mode.
I've tried multiple types of security (WPA-PSK, WPA-PSK 2, TKIP, AES...), the odd thing is, the type of security my main router uses (which the phones connect to without a hitch) does not work. I have tried different channels. My main router's channel is 1, which works perfectly fine. To make sure there is little interference, i set the AP channel to 4. I've also tried auto, no avail.
The laptop doesn't seem to care what i change the settings to, it connects fine and gets the internet perfectly. But my phone and tablet just don't want to play ball. I don't think the router is broken or anything, it works fine, but i think there's some incompatibility issue here that i'm not seeing.
My laptop, windows 7, is telling me there are no connections available. My iPad and phone are connected. I've removed my wifi network and replaced it, I've restarted my laptop, I've deleted other networks.
My cellphone: Motorola Defy running on Android v2.1(Eclair)
I use a USB modem to connect to the internet. I need to set up a wi-fi connection between the laptop and the phone so that i can use the internet connection using the phone.
I have a WRT160 V2 router with firmware v2.0.02. I have had the router for years without any problems. A few months ago I have started to see an issue where I lose connection to my internet on my laptop, and wifi on my phone at the same time. I have wifi calling on my phone and it disconnects also at the same time. All of a sudden, everything will stop working, then about 40 seconds later, it all works again. I lost the connection maybe every 30 to 60 mins. I rely on wifi calling for my primary phone, and I end up getting cut off when talking to people. BTW wifi calling is for all tmobile phones, but also normal wifi to surf the web on my laptop and phone drops too at the same time.
Is it possible to run a large LAN over copper twisted pair cables?This is to connect 41 PC's that monitor fire systems on a large hospital site.I am trying to use the existing cable that is wired in a loop all round the site.
I have a long 2 pair cat 5 cable which I want to use to connect a ADSL modem to my desktop (located in a different room). I took the cable to few local computer dealers but none of them could connect an RJ-45 connector to it. They can only connect a 4 pair cat 5 cable. Connect a 2 pair cat 5 Ethernet cable to a RJ-45 connector. Kindly use simple language. I have attached an image of the cable for your reference. [URL]
