2x Client On Android To Remote Into Desktop
May 25, 2012
This is probably where I should have started my search. During the last 2 days I have taught myself numerous things to try and figure out this problem. I want to run 2x Client on my android to remote into my desktop. I have a Verizon fios actiontec router ver. I and running win 7 prof.. I have been able to easily set up the 2x client and remote into my desktop while on my home wifi but trying to use 3g/4g service has yielded nothing but heartache and stress.
View 4 Replies
ADVERTISEMENT
Jan 22, 2011
I have A setup in different location with the the ASA Firewall with VPN enabled and a Print server. on Network B i have a server with 2008 installed and its my NAT server, DNS and File server.Now the Client on Netwrok B wants to access the Server in Network A Remotely through VPN they could connect to but cannot user Remote Desktop either its Ip translation issue or i dont know.
View 2 Replies
View Related
Aug 9, 2011
Attempts to run remote desktop client a laptop on a tower using a CAT 5 Crossover isn't working. After starting the remote desktop on the laptop, I'm asked to identify the other computer, which I do, and a remote desktop window with a black background pops up, as expected. But I expect an opportunity to login will be displayed after a second or so. That never happens. After about a minute this pops up:Remote Desktop Disconnected?Your Remote Desktop session has ended.The connection to the remote computer was lost, possibly due to network connectivity problems. Try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support.
My clients are impressed with my ability to setup their networks, Linksys routers with WIFI. But toss something unfamiliar into the mix, like this situation, and I'm pretty lost, pretty quick.
Environment:
Hospital's WIFI.
Laptop running XP Home with WIFI and Ethernet.
Tower running Win 7 Ultra with Ethernet.
Cat 5 crossover cable.
Goal:Configure laptop to access Hospital's WIFI. This is successful, I'm using it to post this. Configure laptop run a remote desktop with the tower as the server. The tower, running Win 7, has no monitor. I don't have a flat screen monitor, and didn't feel like dragging an 80 pound 24 inch Nokia into the hospital.After reading some sites while trying to figure this out, I gave the laptop the same group name, workgroup, as the tower.In my experience, starting the tower has been, turn it on, and it boots to Win 7. But I can't watch that happen without a monitor. I can't configure the the tower's network connections without a monitor either.I purchased the CAT 5 crossover cable yesterday, for this occasion. The label on the plastic bag it was packaged in had the word "Crossover" on it. I connect the CAT 5 to the laptop's single ethernet connection, and to the tower's Intel pro card. At home the laptop is on WIFI, the tower connects to the router.
View 4 Replies
View Related
Apr 18, 2013
I have a need to Remote Desktop connect to company’s employees for support then they are abroad and using Cisco AnyConnect client.Cisco AnyConnect client connection works fine, clients can reach company’s inside network without problems, but I cannot make revers connection, I cannot Remote Desktop connect or ping VPN clients from companies inside network. I cannot ping clients from ASA too.I am using ASA 5520, Cisco Adaptive Security Appliance Software Version 8.4(3) Device Manager Version 6.4(7), and Cisco AnyConnect VPN Client 2.2.0133. Protocol Encryption- AnyConnect-Parent SSL – Tunnel DTLS-RC4 RC4 AES 128.
View 0 Replies
View Related
Jan 26, 2012
I have set up an Any connect VPN client profile in ASA 5200. So, before creating an Any connect profile, i have uploaded the Any connect client image into flash (.pkg).It was successfully uploaded.While creating the profile, i have choosen the AAA server that i created (here its a RADIUS Server), specified the IP pool (192.168.2.x to 192.168.2.x),and assigned a group policy that i created.
So, in the client side i have installed the Any Connect VPN client in Win XP (version compatible with XP, same as the one that was uploaded into flash).Entered the IP of ASA in the "connect to" field of Any connect client. So, in the group field, it has auto detected the any connect profile which was created in ASA and i entered username and password and clicked on connect.It has authenticated the user credentials and has displayed the banner present in the group policy.
I accepted the banner, it displayed the security alert,clicked on OK on the alert, immediately after this it has thrown me a warning "VPN establishment capability from a remote desktop is disabled. A VPN coonection will not be established.".
When i click OK on the warning, it has thrown me another warning "Any connect wasn't able to establish a connection to the specified secure gateway.Please try connecting again".
When i searched for this warning, i got a work around which says "you will have to modify the "AnyConnectProfile.tmpl file", which can be found on the machine where the client was installed (its an xml file). You need to change the setting of "'WindowsVPNEstablishment' from "LocalUsersOnly" to "AllowRemoteUsers".Since i installed the any connect client in XP, i found this xml file in
"C:Documents and SettingsusernameLocal SettingsApplicationData CiscoCisco AnyConnect VPN Clientpreferences.xml" .
So, is this the same xml file where the change needs to be done? Because, i haven't found the setting "WindowsVPNEstablishment" in this xml file.
View 1 Replies
View Related
Feb 9, 2013
I have a new FVS318G with latest FW, trying to configure FVS318 as VPN server, which to allow VPN client such as Android and Iphone be able to connect to FVS318 from the cloud and establish VPN tunnel.(url...), Netgear si using the term so unusual, it calls VPN Gateway and VPN client.Don't know why don't they call VPN server and VPN client.Anyway I did call Netgear Tech-supp.According to the Tech, there is not require the username and password for client to connect to Netgear VPN gateway.I am totally lost. I understand that FVS318 does not support PPTP and L2TP so no luck for Windows, but Android and Iphone have support to IPSec VPN. how to config FVS318 VPN, with username and password (for 2-3 different users username /password credential), VPN policy and Firewall polices if needed for VPN to work.
View 1 Replies
View Related
Oct 29, 2012
I currently have an RV180 in a small business set-up and curently being accessed remotely by laptops (Quick VPN) and Ipads/Android ICS tablets (PPTP). All is working well but I've become concerned about the security risks of PPTP and would like to shift the tablets to IPSec.
1) For a small business are the PPTP risks real?
2) What are the alternatives for Android ICS? I can't find a Quick VPN client for Android, has anyone seen one.
3) I can't get the core IPSec VPN in Android to connect to the RV180? Is this possible? Has anyone succeeded?
View 0 Replies
View Related
Feb 20, 2012
I want to setup remote access for my Android phones and tablets using Cisco ASA 5510 . Is there any particular Android client which perform the specified functionality.
View 1 Replies
View Related
Mar 9, 2011
On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.
View 1 Replies
View Related
Dec 12, 2012
TiVo and Pioneer offer remote control software for iOS and Android equipment. I've been using both for a while, and it's great stuff. When hardwired to the router. Behind the DAP-1522, not so much.The DAP works like a champ in every respect except in this application. Everything attached to it can hit the internet- the TiVo, the Samsung smart TV, my laptop via 1000baseT, and to anything else networked in the house. Presently the iPad can control the Tivo, but not the Pioneer. But Airplay on the iPad connects to the Pioneer with no problem. And then the iPad remote can control the Pioneer again.Another example is that the iPad can't find the TiVo, but my Android phone can. Usually.
View 1 Replies
View Related
Jan 2, 2012
Have just been trying to install Remote Desktop between two XP pro laptops When I try to log on I get a black screen with the connection bar at the top with the name of the remote computer and after about thirty seconds it drops the connection. The remote laptop comes up with logon screen but it isn't visible on the on host machine.I have followed all the instructions including file sharing enabled remote accesss etc, Both machines show up on network map and can ping each other.
View 2 Replies
View Related
Jan 7, 2012
To use Remote Desktop Connection, is it really this easy:Open up remote desktop connection on your Host PC --- type the IP of the computer you want to access, then click connect --- As long as "Allow Remote Desktop" is enabled on the PC you are trying to connect to, your attempt will be successful
View 1 Replies
View Related
Nov 20, 2011
i want give the dos printing from remote desktop to local computer on anotherlocation
View 2 Replies
View Related
Mar 8, 2013
We have a server which in addition to other services is used to stream live hi-def video from our building during special events.We use a software video/audio production mixer which works very well. But we now would like to make a change in the system.Is it possible/practical to use Remote Desktop via the second - as yet unused - LAN in our server. We really would like to put the operators in a different location where they have both video and in-person view of the event being streamed. But we don't want to use more bandwidth on the LAN...the production mixer handles a *lot* of uncompressed video and tends to be a bandwidth hog.
View 4 Replies
View Related
Sep 20, 2011
Can i build a Server through Remote Desktop using VPN, how will be the performance? Is it advisable ?
View 1 Replies
View Related
Feb 14, 2012
Is to possible to connect to someone's computer via remote desktop connection w/o them finding out what my ip is?
View 4 Replies
View Related
Dec 28, 2011
I have a home network and I routinely connect from my laptops to my wired desktop via Remote Desktop. Routinely, that is, until I replaced my old wireless router with a D-Link Wireless N router. But now, after the change, I can no longer remote desktop in. I *am* able to ping and file share with that computer, just no remote desktop.
View 3 Replies
View Related
May 19, 2011
The other computer running XP connects to the server through remote access but the one running windows 7 does not
View 1 Replies
View Related
Jan 15, 2012
We use Nortel VPN and the problem is that it's set so when you connect to it, you can only access company resources so no Internet. To mitigate that we use vmware and run Windows XP at the same time as our Windows 7 systems. I'd love to be able to use remote desktop though and connect to a system located elsewhere even another office computer and have that one on the VPN, but of course as soon you connect the remote desktop connection goes down with it.I'm just wondering if there's any ways around this. I'm assuming not, but I'm not sure how VPN fully works. Like if I had 2 network cards in the remote system, when I VPN in does it block connections from all network cards? Ideally I'd like to use something like Amazon Web Services since their Windows Server tier has the free option which is good, or will use another VPS type system running Windows Server.
View 3 Replies
View Related
Apr 5, 2011
I opened a computer in other network via remote desktop(because I forwarded port in router)....and tried to access other computers in the network via remote desktop again from that computer but after I done, I don't know how to close the secondary remote desktop. There was one close button on the top, but if "close" it, whole rdp connection was closed. The secondary rdp connection is still open in the computer.
View 1 Replies
View Related
Feb 7, 2012
I have a PC behind a DSL router. In my PC (WinXP SP3) I have a virtual machine also running WinXP SP3. I would like to access the VM via remote desktop. Since I have a dynamic IP, I use the(url)tool to solve the problem. I installed the no-ip sync tool in the VM. Now when I write my no-ip address in the remote desktop from my office, I will access my host system, and not the hosted VM. Does any knows how I should configure things in order to get access to the virtual machine and not to the host machine
View 5 Replies
View Related
Feb 10, 2012
I have some iMacs that I manage for, in addition to my primary PC computers, such as my Toshiba Windows 7 laptop, which is what I am currently most concerned with. What I would like to do, is Remote Desktop Control (I'll abbreviate that as RDC) these mac computers through the network from my Windows PC. I am aware that this is possible with either Google Chrome, or by checking an OSX setting that will allow for VNC applications to connect, but I would prefer it if there was some way to RDC these iMacs from my Windows laptop without needing to change their settings or install software-something like how Mac-Mac RDC connections work, where I can just select a computer from the network, type a password, and go.
View 1 Replies
View Related
Jul 16, 2012
Basically, I rebuilt my network over the weekend, to include a subnet, and can no longer connect my desktop to the remote PC. My old router was reset to defaults and re-configured. My PC has been wiped, reinstalled, and fully updated.The error I receive is "Remote Desktop can't connect to the remote computer for one of these reasons: etc" I've only seen this error in the past when the PC I connect to was powered down. I have confirmed that everything is still set up properly on the PC I'm trying to connect to via an associate, and it is not powered down.
Old setup:
[My Win7 PC] ---- [old router] ---- [modem] --- [internet] ---- [Remote PC (Win 7)]
...............................| | |
.........................other local PCs
New setup:
[My Win7 PC] ---- [old router] ---- [new router] ---- [modem] --- [internet] ---- [Remote PC (Win 7)]
.........................................................| | |
...................................................other local PCs
1. I went into Windows firewall to allow Remote Desktop through, but it looks like that only needs to be set for the PC I'm trying to connect to. (Yes/No?)
2. I've forwarded port 3389 from the old router to my PC.
3. I haven't done anything yet to the new router, because I really can't tell if I'm doing the right things. The very first time I connected to the remote PC, it went right through, and I didn't have to change anything in the old router (I think - it's been awhile). I really don't know where to go from here, and it looks like the setup options I've found in the forum so far (static IP, port forwarding, Windows firewall changes, etc.) leave me with more security risks than I had on the old network, and there seem to be some conflicting opinions about the setup process.
View 2 Replies
View Related
Jun 7, 2012
I am having trouble connecting to my home computer from my work computer via the Windows Remote Desktop Connection app.On my home computer (win 7 pro) I have:
1. Allowed incoming remote desktop connections
2. Verified that the firewall is open for RDC
3. Forwarded port 3389 on my router to my devices static IP
4.Verified that I am using the correct IP (Router has a dynamic IP but I called home and had my wife read the current IP # from whatismyip.com)
5. Setup an account on the home computer that is password protected
I am connecting from a win XP pro computer.I receive 0% packet loss with reasonable time delay when pinging my home IP from the work computer.I also asked a family member to try from a different location (using Vista Ultimate) with the same result Error is that connection is never established and I am never prompted to logon to the home computer.I can connect via RDC when on the home network.
View 4 Replies
View Related
Jul 12, 2012
Is there any free tool like lanvisor ???I have 50 computers in my lan and wish to monitor all those computers during their online examinations ... I need a free tool which will autostart in all clients so that i can sit in one computer monitoring everyone.
View 1 Replies
View Related
Mar 30, 2012
REmote desktop connection times out when there is no activity, I mean I open rdp to work computer from home ,If I am away from the computer I am not using keyboard , after few minutes I get a blank screen and if it is very longthe connection times out and I have to relogin to my computer, I need suggestion on how to retain the connection so that no blank screen appears and I alos dont loose connection .
View 1 Replies
View Related
Feb 17, 2011
So i'm trying to set up remote desktop connection for my desktop at (xp pro, sp2).
I've went through all the steps:
- allowed users to connect remotely (system properties)
- added to firewall exceptions
- opened up port 3389
I've disabled firewall and virus protection for now as well to test.
It works fine when I try connecting from my laptop at home by opening up the remote desktop program, and entering the local static ip address that i've configured on the desktop (i.e. 192.168.x.x);
however, when I try to connect outside of this network (on the road or office), I can't seem to connect (yes, I replaced the ip 192.168.x.x with the public ip of the desktop which I got from whatsmyip.org). I also can't ping the public ip of the desktop (can only ping the 192.168.x.x ip of the desktop)
Again, router port is open to port 3389, firewall is turned off on both the desktop and laptop, and virus protection is off.
View 10 Replies
View Related
Mar 14, 2012
My problem is when i try and connect a printer from windows 7 that is connected to a local pc via usb onto a remote desktop it doesnt connect but when i try and connect from wins xp it does. On the remote desktop i click to add a printer and then i select network printer. Then i type\ip-address-of-pcprinter share name. It says it cannot connect to printer but when i try this method on an xp computer it accepts it.
View 6 Replies
View Related
Dec 18, 2011
I have a problem connecting to VPS with Windows XP Remote Desktop Connection.The error I'm getting is:"Remote Desktop Disconnected - The remote connection has timed out. Please try connecting to the remote computer again."I am not behind any network, firewall, router...I tried to turn off firewall and antivirus programs to see if they are blocking it. It didn't work.I could find from Microsoft support site refer to the server side configuration. But I know problem isn't with server, because I am able to connect from another PC (notebook running windows 7 with wireless connection). It is working straightforward with default settings.Are there any settings that need to be changed in Windows XP for RDC to work?
View 1 Replies
View Related
Jun 5, 2011
I am trying to use my computer running Windows XP Home to remote desktop into my computer running Windows 7 Ultimate over the internet.The computer I am trying to connect to is listening on port 3389, has all sort of firewall exceptions sorted and is enabled to accept remote connections. The computer I am trying to use to connect has no firewall currently (I have disabled it just to get this working).
And yet when I try and connect using the ip address of the host computer I receive the message "remote desktop cannot connect to the remote computer for one of the following reasons"... and so on.
View 4 Replies
View Related
Mar 30, 2012
My computer stopped being able to Remote Desktop to my server on my network. My backup software also doesn't recognize my server. But, I can access its folders using Windows Explorer. Any other PC on the network can remote desktop to the server and connect. What happened to my machine? This message appears when i try to connect: "Remote Desktop can't connect to the remote computer for one of the following reasons:
1) Remote access tot he server is not enabled
2) The remote computer is turned off
3)The remote computer is not available on the network
Make sure the remote computer is turned on and connected to the network, and that remote access is enabled."
My computer is:
AMD: Athlon 64 X2 5200+ 2991 MHz
Mobo: Gigabyte M57SLI-S4 v.2
RAM: 4GB Mushkin DDR2 PC2-6400
OS: Win 7 64bit
VC: Geforce GTX 470
View 1 Replies
View Related
Apr 19, 2011
we log into a server that has windows nt through the windows desktop. Now i want to install the hp officeject 7310 to itHow to do i go about this, do i have to install a driver?
View 1 Replies
View Related
Aug 23, 2011
Remote Desktop can't connect, so I've got four servers in the same LAN. Whenever I try remotly access the web server, the message (Remote Desktop can't connect to the remote computer for one of these reasons: 1. Remote access to the server is not enable. 2. The remote computer is turned off. 3. The remote computer is not available on the network) The thing is that I can connect to all servers with any desktop computer in the network, but when I try to do it in my laptop (that is connected to the same LAN) I've got access to the other servers but not to the web server. Sometimes I had to restart this server and works fine for a little while.
View 1 Replies
View Related
