D-Link DAP-1522 :: IPad And Android Remote Control Software
Dec 12, 2012
TiVo and Pioneer offer remote control software for iOS and Android equipment. I've been using both for a while, and it's great stuff. When hardwired to the router. Behind the DAP-1522, not so much.The DAP works like a champ in every respect except in this application. Everything attached to it can hit the internet- the TiVo, the Samsung smart TV, my laptop via 1000baseT, and to anything else networked in the house. Presently the iPad can control the Tivo, but not the Pioneer. But Airplay on the iPad connects to the Pioneer with no problem. And then the iPad remote can control the Pioneer again.Another example is that the iPad can't find the TiVo, but my Android phone can. Usually.
View 1 Replies
ADVERTISEMENT
Dec 4, 2011
I am unable to connect and Android device (HTC Desire, Samsung Nexus S etc) wirelessly to the DAP-1522. I've search through the forums and can't find anyone else having issues with Android so I think it must be one of my settings. It works fine if I switch to WEP however I don't want to use the weaker hackable protocol. Any way to have the DAP-1522 in WPA working with an android device?
View 4 Replies
View Related
Oct 22, 2012
How do I fix the problem". Domain not set.invalid may not be the problem. had a power surge at my house and it took down my internet. I had to reset my router back to factory settings and I finally got the router to work with my PC. But I cannot access the internet from my iPad 2 or my Android phone. Both devices see the network and can hook up to the network but the internet is not working on either device.
View 14 Replies
View Related
Jan 28, 2013
Being new to the RV180 (and VPN routers for that matter) I have been struggling to get a VPN going, supporting both my Android and iPad devices. However, I understand a IPSEC connection would be a more secure sollution. Unfortunatly I cannot find a clear instruction anywhere to do this.I found the settings/descriptions in the RV180 quite different from the (few) settings in the mobile platforms. So far no success in getting it setup.
View 2 Replies
View Related
Mar 2, 2013
i have no access to my laptop keyboard, it crashed but i still need to use router for my roku and nintendo wii, however my isp has a captive portal.
View 1 Replies
View Related
May 25, 2012
This is probably where I should have started my search. During the last 2 days I have taught myself numerous things to try and figure out this problem. I want to run 2x Client on my android to remote into my desktop. I have a Verizon fios actiontec router ver. I and running win 7 prof.. I have been able to easily set up the 2x client and remote into my desktop while on my home wifi but trying to use 3g/4g service has yielded nothing but heartache and stress.
View 4 Replies
View Related
Feb 20, 2012
I want to setup remote access for my Android phones and tablets using Cisco ASA 5510 . Is there any particular Android client which perform the specified functionality.
View 1 Replies
View Related
Oct 10, 2011
I'm having some trouble connecting to my computer remotely via my iPad.I have a fairly strict router so i installed and am running Hamachi as my network through which i connect to my server computer via another computer. I realized as I was writing this that the reason i could not connect to my server computer via the Hamachi address was because my ipad is not connected to the Hamchi network. When i try to connect via the ip address i get from whatsmyip.org i simply get an error. I have absolutely no idea where to go from here, and I would really like to have remote access to my server computer from my ipad.
View 2 Replies
View Related
Jul 29, 2011
I'm facing a problem with the Cisco 1522 AP at the remote site every day that it takes about 2 hours to join the WLC, is there any way to minimize the time that the mesh 1522 AP takes to join the WLC?
View 2 Replies
View Related
Feb 9, 2012
Is their a program i can use to see who is doing what then disable their monitor keyboard and mouse. I work for my college/student and i am the assistant admin, my teacher gave me full admin privileges. I would like to have this as untended program where they cant change any thing stays hidden in the back ground. I used team viewer but i have to have them to log each one.
View 2 Replies
View Related
Feb 10, 2012
I have some iMacs that I manage for, in addition to my primary PC computers, such as my Toshiba Windows 7 laptop, which is what I am currently most concerned with. What I would like to do, is Remote Desktop Control (I'll abbreviate that as RDC) these mac computers through the network from my Windows PC. I am aware that this is possible with either Google Chrome, or by checking an OSX setting that will allow for VNC applications to connect, but I would prefer it if there was some way to RDC these iMacs from my Windows laptop without needing to change their settings or install software-something like how Mac-Mac RDC connections work, where I can just select a computer from the network, type a password, and go.
View 1 Replies
View Related
Jan 2, 2013
I have an in-law with early stages of temporal lobe dementia. She lives at home alone and is still pretty independent but among other things she is really struggling with anything to do with times and dates. Diaries and the like are increasingly hard to manage. I am wondering about a technological aid. She has a WIFI network at her home. If there was a way I could set up a MONITOR on the wall that could display say a diary or calendar that I could update and change remotely?. I'd need a PC set up there to run the display, and then connect to that over the internet and control what it shows.Either way it needs to be something I initiate and control as needed, so she doesn't have to do anything like send a remote assistance request, because she can't really manage that.
View 2 Replies
View Related
Feb 10, 2011
how to Setup remote control console
View 1 Replies
View Related
Jul 9, 2012
I had IPAD setup IPSEC Remote Access VPN to try to conect to ASA5540 and Cat65 VPN service module(V1).I works fine on Cat65 VPN service module using IPAD client, but it is fail on IPAD client connect to ASA5540.THe message should be "VPN server is no response".My laptop Cisco VPN client(Windows 7) works fine on both (Cat65 VPN module and ASA5540).There is any special setting for IPAD client on ASA5540 ? The IPAD ios version 5.1.1.The ASA5540 version 8.4(4)1 ADSM 6.4(9) The Cat65 version is quit old binding with CatOS V12.2 etc.
View 2 Replies
View Related
Nov 16, 2011
I am trying to understand how to remote control a clients computer through the internet.
I have Symatec PCanywhere installed on both When i'm on the same connection (wireless internet).I can get it to work no problem.However when I try to remote in using a different internet connection it does not go through.
I've done some research and found out that instead of using the IP address it gives me (dynamically) [192.168.2.5] i need to aquire the WAN IP address from a website or through the router. As well as configuring virtual server through the router, and enable port forwarding in some way or another for specific ports.
View 4 Replies
View Related
Oct 23, 2012
I am developing the system remote control desktop from mobile phone through internet. I want how the connection is established between mobile phone and desktop through internet? What is the exact process of connection and internal structure of connection
View 1 Replies
View Related
Mar 10, 2013
My D-Link DAP-1522 wireless bridge is connected through a single cat5 cable from the LAN port on my PC to the 1st LAN port on the D-link unit. At the moment, it is in bridge mode, with the blue power indicator on, the orange wireless connection light flashing, and the 1st LAN port connection periodically wavering indicating that it is communicating with my PC. When I attempt to configure the DAP-1522 via my internet browser, (IP 192.168.0.50) I get an error saying that the requested webpage does not exist.
View 6 Replies
View Related
Sep 30, 2011
I recently had a networking guy set up a VPN for me, but for it to work properly he had to change all my IP addresses to 192.168.10.xx from 192.168.0.xx. My DAP-1522 (in bridge mode) continued to work but I am unable to log on to it, I think because it's address is 192.168.0.0. I have run into some other issues which makes me think I may need to upgrade the DAP-1522 firmware and/or assign it an address beginning with 192.168.10.xx, however I can't log on to the bridge. (Nor do I know how to change or possible reassign the DAP-1522's address through my router, a DIR-615).
View 5 Replies
View Related
Apr 26, 2011
My problem is two-fold:
1. the DAP-1522 will not connect to the 5GHz network of the DIR-815. Although, this doesn't surprise me as none of my 5GHz-capable devices see it, other than intermittently and at low signal. It is most likely an issue with the 815's 5GHz radio/network.
2. OTOH, the 1522 does appear to connect to the 815's 2.4GHz network just fine. However, there is no Internet access for any of the devices connected to the 1522's ports.
I know the 1522 can work correctly on 2.4GHz, as it previously did fine with my prior 2Wire router from AT&T. (I've just switched to Comcast, using the DIR-815 connected to their SMC modem.)
Also, I know the router and modem work fine (at least with 2.4GHz), as all of my wireless devices connect easily and with screaming bandwidth to the router and Internet.
View 4 Replies
View Related
Mar 12, 2012
I have a WIN XP desktop which I successfully connected to the 1522 AP - as evidence of the GUI to program it. I have the 1522 set to Bridge Mode via the switch on the unit. The 1522 has hardware version B1 and Firmware version 2.000. I joined my wireless network successfully as evidence of the Status page showing it's successfully connected and bridged to my network. I then disabled my USB wifi NIC in hopes of using my hardwired connection to the 1522 to get on the internet.
Wireless Radio : Enabled
Bridge State : Connected
MAC Address : fc:75:xxxxxx
802.11 Mode : Mixed 802.11a, 802.11g and 802.11n
Band Width : 40
Channel : 6
Network Name
(SSID) : cleveland
Wi-Fi Protected Setup : Enabled
Security : WPA2-PSK
View 3 Replies
View Related
Dec 7, 2011
I have dap-1522 version A Browser IE8 with lestest updates.
I downloaded the DAP1522_FW_1.31zip went I try to upload via the 1522 admin error not correct file.
I try three different way to download it, could the file be bad on dlinks web site?
View 4 Replies
View Related
Aug 27, 2010
I have just discovered after three weeks of testing that DAP-1522 wireless bridges are not compatible with all the new Pioneer AVR's that support internet radio and Iphone control. Anytime a DAP-1522 is powered on and on the same subnet mask as a Pioneer receiver it will cause the Pioneer to loose it's connection every 30 minutes. The receiver is then not able to connect unless it is powered off and on again. The DAP-1522 will cause this even if the Pioneer is hardwired to a router and nothing is plugged into the DAP-1522. This affects all new models of Pioneer receivers including the Elite line like I have.
I have tested this with 3 differnet Pioneer receivers and 2 DAP-1522's and always got the same results no matter what the settings were and with the 1522 in AP or bridge mode. Other Pioneer receiver owners experiencing constant disconnect problems on another forum have now also confirmed they have DAP-1522's.....and they are also pissed after spending countless hours troubleshooting.
I talked to Dlink support today and they will not admit to a problem so I can't wait to contact Pioneer tech support on Monday to let them know I have found the reason they are seeing returns on their new receivers (some cost as much as $7K) since many of the new owners like myself are exchanging them thinking they got a bad one. I'm sure Pioneer will test this immediately and force a Dlink fix or turn it over to the FCC.At this point I just wish I could get my money back since I have also already confirmed that a netgear bridge works just fine. Come to think of it, I know Dlink has a new refund policy, but I will check with my state district attorney to see if they can legally keep my money even if the product doesn't work. I don't see anything on the outside of the box with this policy so therfore I wasn't given fair warning of the policy before purchase and would not be expected to know it since it is not industry standard. Let the games begin.
View 14 Replies
View Related
Mar 14, 2012
I just purchased a DAP-1522. The sticker on the bottom says it's a version B1, with firmware 2.0.In the web interface, it says: "Firmware Version : 1.21 , Fri 26 Jun 2009"I downloaded the 2.01 firmware from the D-Link site and when I try to upload it, it says it's not an image file.
View 11 Replies
View Related
Jan 20, 2011
I have bought 1 Dlink Dwl 2100 Access Point about 1 week, it working with ( Default Gateaway 192.168.1.1) but I want connect with 2100Ap But I get Ip from my Livebox Orange.Can I get Ip From 2100Ap (Default Gateway 192.168.0.50), not by LiveBox Orange (Default Gateway 192.168.1.1).My brother live upstair (with LiveBox) I Live ground Floor and connect to Cable Utp cat5 form upstair to ground Floor. In my room I have a Switch connect to 2100Ap.
LiveBox Orange Default gateway is 192.168.1.1
Dlink dwL 2100Ap Default Gateway is 192.168.0.50
My os is windows Xp sp2
View 2 Replies
View Related
Nov 29, 2010
I have a DIR-655 router with a DAP-1522 connected in bridge mode. The firmware on the router is 1.21 and the firmware on the bridge is 1.21. I have my SSID set to broadcast on the DIR-655 with WPA-Personal encryption. When I initially setup the DAP-1522, I was able to access the setup page and connect to the DIR-655. On the status page of the DAP-1522, wireless radio is enabled and status is connected. I connected my XBOX 360, Sony BR player and DirecTV DVR to the wireless bridge and none of them can connect to the internet.
I can wirelessly access the bridge's IP, 192.168.0.50, from any computer connected to the DIR-655 but when I attempt to access the internet on any device connected to the DAP-1522, I do not get a connection. On the XBOX 360 I cannot connect my live account. On the Sony BR player, I get a message that new firmware was found, but when it attempts to connect to the internet to download it, the connection times out. Same occurs when attempting to access the internet on the DirecTV DVR receiver.
View 14 Replies
View Related
May 25, 2012
More that a year ago, with guidance from D-Link Customer Service, I performed setup on a system consisting of a DSL-2640B (with wireless disabled) and a DAP-1522 as an access point. I included the 1522 so as to have an N network, since the 2640 is G. The system works fine and I'm able to stream via the 1522 to an N 300 USB Adapter. Internet access is fine, and I'm able to access the 2640 with no problem.I want to add another 300 in a different location. To do that, I'll need to access the 1522 from my Windows 7 computer, since I've lost the passphrase that I'll need for the 300.Everything that I've read tells me to connect the 1522 directly to my computer via cable and to temporarily change the network adapter settinge to:
IP = 192.168.0.x various sources list values of 2 and 99 for x
Subnet mask = 255.255.255.0
Gateway = 192.168.0.50
Then to use a browser window to go to 192.168.0.50 Regardless of the settings that I use, the browser (IE9) always indicates that it can't connect with that address. accessing the 1522, or on any alternative way to obtain the passphrase.
View 3 Replies
View Related
Feb 14, 2012
My DIR 655 router quit working and so I called D link. She had me reset the ip to 192.168.5.x. So now my dap1522 is not connecting to the 655. I connected the dap1522 to my laptop via ether-net and typed in dink, and got nothing, then put in default ip for the 1522 and still nothing. I also tried ip scanner and it would not come up.
View 1 Replies
View Related
Jan 10, 2012
my config : one DAP-1522 as an AP + one DAP-1522 as a switch, 6 meters between them, signal strength about 70. Any others wifi networks around my house. both with FW140b03.bin dated 01/14/2011.Most of the time, both work correctly. But time to time, the wifi link is ko. In AP status, the switch is mentionned connected (uptime = 3 hours ...). The red led is blinking on the switch. The administration web of the switch is not available and the link is ko. Unplug and plug power units doesn't fix the problem. I need to reset DAPs.From Dlink experts, i would like to get more description about issues :
- in switch mode, which are the events modifying the red led state ? what does blinking / off led mean ?
- in AP mode, what does "uptime ...STA ...." mean ? frames are periodically received from STA ?
View 7 Replies
View Related
Aug 8, 2011
Will the dap-1522 work with 3d video ie; from a 3d Blue Ray Player? I am upgrading system to an LED Samsung 3D TV and Samsung 3d Blue Ray Player. I know that HDMI 1.4 cables will work but am looking at the wireless option.
View 1 Replies
View Related
Jan 16, 2013
i have multiple DCS-930 and DCS-932 at my home. I also have other IP cameras. Is there a way to add IP cameras to the mydlink app on Android, iPad, and web?
View 1 Replies
View Related
Mar 20, 2012
My Android Tablet ASUS TF101 fails to wireless connect at the next reboot after it has been sleeping.Unplugging the DIR615 and replugging solves the problem until next time. The Tablet shows a poor signal until the router reboots (even at 4 feet away). The router firmware is 3.11NA and the hardware is C1.Other hardware like an ACER WIN-7 PC can still wireless connect when this problem is exhibited.
View 6 Replies
View Related
Jul 16, 2012
Dir 615, hardware version E4, Firmware version 5.1.Intermittent (95% of the time), problem accessing Google using my Android via wireless. A PC using XP on the same network has no problems. Using the Android on my local library's network I have no problems.Have restored to factory default settings and reconfigured with no improvement.
Modem setup: Setup to connect to another router, UPnP disabled, DHCP server disabled, 802.11 mode -mixed 802.11n & 802.11g (Android connects using 802.11n PC uses 802.11g have forced Android to use 802.11g to no avail), Auto channel scan, (have tried fixed), Channel width 20/40, visible mode.Internet connection Dynamic IP of course it is going out through my other Dlink ADSL 2 modem router. Also disabled QOS engine.
View 9 Replies
View Related
Jan 5, 2012
changed the router wan access pwd and now trying to test the dap i can't seem to log in with the default ip / dlinkap url access i have tried the bridge and ap switch setting on the dap with no luck after resetting the dap a couple of times with no luck ..
View 8 Replies
View Related
