Is there any free tool like lanvisor ???I have 50 computers in my lan and wish to monitor all those computers during their online examinations ... I need a free tool which will autostart in all clients so that i can sit in one computer monitoring everyone.
View 1 RepliesWe use Nortel VPN and the problem is that it's set so when you connect to it, you can only access company resources so no Internet. To mitigate that we use vmware and run Windows XP at the same time as our Windows 7 systems. I'd love to be able to use remote desktop though and connect to a system located elsewhere even another office computer and have that one on the VPN, but of course as soon you connect the remote desktop connection goes down with it.I'm just wondering if there's any ways around this. I'm assuming not, but I'm not sure how VPN fully works. Like if I had 2 network cards in the remote system, when I VPN in does it block connections from all network cards? Ideally I'd like to use something like Amazon Web Services since their Windows Server tier has the free option which is good, or will use another VPS type system running Windows Server.
View 3 Replies View RelatedI want to know how to configure my system to connect to Remote Desktop Connection?
View 1 Replies View RelatedI am developing the system remote control desktop from mobile phone through internet. I want how the connection is established between mobile phone and desktop through internet? What is the exact process of connection and internal structure of connection
View 1 Replies View RelatedWe are using MS System Center Operations Manager to monitor network devices. We are trying to monitor our Cisco ASA 5525-X firewall interfaces.
We have a generic management pack installed that seems to work for parts of the 5525. We can see performance info for IF-4 but none of the other interfaces.
Our Management Pack is a generic Cisco Adaptive Security Appliance Version 9.1(1) management pack.
Is there a management pack that is specifically for this Cisco firewall?
I'm setting up a Network Monitoring System in Nagios and Nagvis. Now, I want to monitor the cpu and memory of the switches SGE2000 and SGE2010 with SNMP. Does the OID for the switches SGE2000 and SGE2010 (CPU and Memory).I can't not seem to find them on the Internet(searched for hours).
View 1 Replies View RelatedI would like to make a monitoring system of my network based on Zabbix . I would like to use SNMP protocol with the Cisco RV180W but in that case, i need its MIB table to generate appropriate OID for CPU and memory using and network information. Where i can find this kind of information ?
View 1 Replies View RelatedI need to track and record all functionality, connectivity speeds and applications of a remote laptop. Here's the basic set up of my problem:We have 40 medical facilities in five Western States, each with up to 30+ pieces of hardware including thin clients, PCs, laptop computers and wall mounted touch screen kiosks operating on a variety of OS including primarily XP pro, then Linux and transitioning into Win 7.We have installed Aruba wireless network in each building on which our mobile medical cart laptops connect. Each facility has a different mix of primary and backup/failover ISP from DSL, Cable, T1 to Bonded T. All are at or exceed 22MB down, 5MB up save the T1s at their dedicated 1.5 and we monitor speeds and network stats trhough our gateway device. PfSense.All employees connect through an RDP (Remote Connection) to our hosting company in Atlanta, GA where the farm of about 28 servers reside hosting our medical, email and office applications.We regularly are contacted by nursing and clinical office staff complaining that "the network is slow". We review connection speeds, loads, ping times and confirm that there are no ISP Speed issues that are causing the "Slowness". However when we review exactly what the nurses mean by "slow" it invariably turns to how long it takes to log in to the RDP sessions and access then run their medical applications in the RDP. They often sit and wait for the RDP to load for five minutes or more and complain of waiting for their typing to catch up in the applications they work in.
We believe the slowness occurs once they are connected in the RDP and that their problems are occurring at the hosting company's facility, getting through their firewall, through profile management and server hardware/software but we can not prove this is the case because the hosting company always claims they see perfectly acceptable speeds and access on their side and we are locked out from access to monitor tehir environment. Changing hosting companies is probelmatic because they are specialised in our industry and leaving would be diffcult. I need some software that I can install on a few machines in a select few of our facilities that will track and record the actual user experience so that we can watch and review exactly what is happening, what the network stats look like and precisely where the user is experiencing "slowness".
On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.
View 1 Replies View RelatedAny temperature monitoring unit we can install in our server room that we can use to moniter the room temperature? We had a near catastrophe recently when the air conditioning unit failed to restart following a power outage.
View 3 Replies View RelatedWe currently have a few 5505s installed at client sites which are connected via s2s ipsec VPN to our datacenter's 5510. We are using Nagios to monitor the local data center and remote client infrastructure (over the VPNs) which has been working well.
We would like to also monitor the remote 5505s using SNMP over the s2s tunnels but it doesn't seem to be working, the connection is timing out. We've configured the remote 5505s with the same snmp statement we used on the 5510 (snmp-server host inside <remote datacenter IP> poll community ***** version 2c) yet the Nagios SNMP check cannot connect to the remote 5505s. We've also tried the command using 'outside' without any luck, not sure how to get SNMP to route over the VPN.
I've just gotten a SG200-08 (SLM2008T-EU), which I would like to monitor remotely from Cacti using SNMP. It seems however, that this switch has no SNMP support - is this correct? Does this mean that there is no way to monitor traffic over the switch's ports short of making a script access the web UI?
View 1 Replies View RelatedI am using asa 5520 and asa 5540 for remote access vpn connections. Is it possible to do active monitoring of my vpn connections so that there would be alerts for vpn tunnels that fail to establish due to other reasons other than user authentication?
View 5 Replies View RelatedI am configuring new ACS 1121 appliance with version 5.3 and wanted to know how to configure Remote Database settings in ACS5.3 Is that necessary to configure that option ?
Also one more thing I can see that ACS 5.3 generates lots of logs is there any solution to reduce such logs. It seems many unuseful logs which are system related are getting logged into device which might no be good for memory requirements of device.
I did a system restore on my xp desktop. Now I can't connect to the internet. My connection says connected but when I go to mozilla it says can't connect to server. All other computers work fine just my fausto which is connected via ethernet.
View 19 Replies View RelatedI have a gateway SX2800-01 desktop with Windows 7operating system. It is not equipped for wireless networking. My question is, is it possible to retro fit it for wireless networking
View 1 Replies View Relatedwhat would a small company need to implement a remote working system for its sales staff? staff would need to check the database for available prices and availability, make travel bookings and complete the sales orders online, working from home.
View 4 Replies View RelatedI am trying to connect to my office PCs via VPN and/or RDP. The office uses Qwest DSL and has a dynamic IP address. I use DynDNS.org to keep the DNS updated with the WAN address of the router. However, any attempt to access the network fails. I have tried remote management access (I enabled it on the router) but that fails. I forwarded RDP ports on the router to one of the PCs but can't connect to it. I also set up a VPN server but cannot connect to it either. Something tells me that all requests to myoffice.homeip.net are not getting to my modem/router. I have even tried the IP associated with the name (Yes, I did check that it is correct!) but nothing works there either.
View 1 Replies View RelatedHave just been trying to install Remote Desktop between two XP pro laptops When I try to log on I get a black screen with the connection bar at the top with the name of the remote computer and after about thirty seconds it drops the connection. The remote laptop comes up with logon screen but it isn't visible on the on host machine.I have followed all the instructions including file sharing enabled remote accesss etc, Both machines show up on network map and can ping each other.
View 2 Replies View RelatedTo use Remote Desktop Connection, is it really this easy:Open up remote desktop connection on your Host PC --- type the IP of the computer you want to access, then click connect --- As long as "Allow Remote Desktop" is enabled on the PC you are trying to connect to, your attempt will be successful
View 1 Replies View Relatedi want give the dos printing from remote desktop to local computer on anotherlocation
View 2 Replies View RelatedWe have a server which in addition to other services is used to stream live hi-def video from our building during special events.We use a software video/audio production mixer which works very well. But we now would like to make a change in the system.Is it possible/practical to use Remote Desktop via the second - as yet unused - LAN in our server. We really would like to put the operators in a different location where they have both video and in-person view of the event being streamed. But we don't want to use more bandwidth on the LAN...the production mixer handles a *lot* of uncompressed video and tends to be a bandwidth hog.
View 4 Replies View RelatedCan i build a Server through Remote Desktop using VPN, how will be the performance? Is it advisable ?
View 1 Replies View RelatedIs to possible to connect to someone's computer via remote desktop connection w/o them finding out what my ip is?
View 4 Replies View RelatedI have a home network and I routinely connect from my laptops to my wired desktop via Remote Desktop. Routinely, that is, until I replaced my old wireless router with a D-Link Wireless N router. But now, after the change, I can no longer remote desktop in. I *am* able to ping and file share with that computer, just no remote desktop.
View 3 Replies View RelatedThe other computer running XP connects to the server through remote access but the one running windows 7 does not
View 1 Replies View RelatedI opened a computer in other network via remote desktop(because I forwarded port in router)....and tried to access other computers in the network via remote desktop again from that computer but after I done, I don't know how to close the secondary remote desktop. There was one close button on the top, but if "close" it, whole rdp connection was closed. The secondary rdp connection is still open in the computer.
View 1 Replies View RelatedI have a PC behind a DSL router. In my PC (WinXP SP3) I have a virtual machine also running WinXP SP3. I would like to access the VM via remote desktop. Since I have a dynamic IP, I use the(url)tool to solve the problem. I installed the no-ip sync tool in the VM. Now when I write my no-ip address in the remote desktop from my office, I will access my host system, and not the hosted VM. Does any knows how I should configure things in order to get access to the virtual machine and not to the host machine
View 5 Replies View RelatedI have some iMacs that I manage for, in addition to my primary PC computers, such as my Toshiba Windows 7 laptop, which is what I am currently most concerned with. What I would like to do, is Remote Desktop Control (I'll abbreviate that as RDC) these mac computers through the network from my Windows PC. I am aware that this is possible with either Google Chrome, or by checking an OSX setting that will allow for VNC applications to connect, but I would prefer it if there was some way to RDC these iMacs from my Windows laptop without needing to change their settings or install software-something like how Mac-Mac RDC connections work, where I can just select a computer from the network, type a password, and go.
View 1 Replies View RelatedBasically, I rebuilt my network over the weekend, to include a subnet, and can no longer connect my desktop to the remote PC. My old router was reset to defaults and re-configured. My PC has been wiped, reinstalled, and fully updated.The error I receive is "Remote Desktop can't connect to the remote computer for one of these reasons: etc" I've only seen this error in the past when the PC I connect to was powered down. I have confirmed that everything is still set up properly on the PC I'm trying to connect to via an associate, and it is not powered down.
Old setup:
[My Win7 PC] ---- [old router] ---- [modem] --- [internet] ---- [Remote PC (Win 7)]
...............................| | |
.........................other local PCs
New setup:
[My Win7 PC] ---- [old router] ---- [new router] ---- [modem] --- [internet] ---- [Remote PC (Win 7)]
.........................................................| | |
...................................................other local PCs
1. I went into Windows firewall to allow Remote Desktop through, but it looks like that only needs to be set for the PC I'm trying to connect to. (Yes/No?)
2. I've forwarded port 3389 from the old router to my PC.
3. I haven't done anything yet to the new router, because I really can't tell if I'm doing the right things. The very first time I connected to the remote PC, it went right through, and I didn't have to change anything in the old router (I think - it's been awhile). I really don't know where to go from here, and it looks like the setup options I've found in the forum so far (static IP, port forwarding, Windows firewall changes, etc.) leave me with more security risks than I had on the old network, and there seem to be some conflicting opinions about the setup process.
I am having trouble connecting to my home computer from my work computer via the Windows Remote Desktop Connection app.On my home computer (win 7 pro) I have:
1. Allowed incoming remote desktop connections
2. Verified that the firewall is open for RDC
3. Forwarded port 3389 on my router to my devices static IP
4.Verified that I am using the correct IP (Router has a dynamic IP but I called home and had my wife read the current IP # from whatismyip.com)
5. Setup an account on the home computer that is password protected
I am connecting from a win XP pro computer.I receive 0% packet loss with reasonable time delay when pinging my home IP from the work computer.I also asked a family member to try from a different location (using Vista Ultimate) with the same result Error is that connection is never established and I am never prompted to logon to the home computer.I can connect via RDC when on the home network.
REmote desktop connection times out when there is no activity, I mean I open rdp to work computer from home ,If I am away from the computer I am not using keyboard , after few minutes I get a blank screen and if it is very longthe connection times out and I have to relogin to my computer, I need suggestion on how to retain the connection so that no blank screen appears and I alos dont loose connection .
View 1 Replies View RelatedSo i'm trying to set up remote desktop connection for my desktop at (xp pro, sp2).
I've went through all the steps:
- allowed users to connect remotely (system properties)
- added to firewall exceptions
- opened up port 3389
I've disabled firewall and virus protection for now as well to test.
It works fine when I try connecting from my laptop at home by opening up the remote desktop program, and entering the local static ip address that i've configured on the desktop (i.e. 192.168.x.x);
however, when I try to connect outside of this network (on the road or office), I can't seem to connect (yes, I replaced the ip 192.168.x.x with the public ip of the desktop which I got from whatsmyip.org). I also can't ping the public ip of the desktop (can only ping the 192.168.x.x ip of the desktop)
Again, router port is open to port 3389, firewall is turned off on both the desktop and laptop, and virus protection is off.