Get Remote Working System

Apr 29, 2012

what would a small company need to implement a remote working system for its sales staff? staff would need to check the database for available prices and availability, make travel bookings and complete the sales orders online, working from home.

View 4 Replies


ADVERTISEMENT

Connect To VPN On Remote System With Desktop?

Jan 15, 2012

We use Nortel VPN and the problem is that it's set so when you connect to it, you can only access company resources so no Internet. To mitigate that we use vmware and run Windows XP at the same time as our Windows 7 systems. I'd love to be able to use remote desktop though and connect to a system located elsewhere even another office computer and have that one on the VPN, but of course as soon you connect the remote desktop connection goes down with it.I'm just wondering if there's any ways around this. I'm assuming not, but I'm not sure how VPN fully works. Like if I had 2 network cards in the remote system, when I VPN in does it block connections from all network cards? Ideally I'd like to use something like Amazon Web Services since their Windows Server tier has the free option which is good, or will use another VPS type system running Windows Server.

View 3 Replies View Related

Remote Desktop Monitoring System?

Jul 12, 2012

Is there any free tool like lanvisor ???I have 50 computers in my lan and wish to monitor all those computers during their online examinations ... I need a free tool which will autostart in all clients so that i can sit in one computer monitoring everyone.

View 1 Replies View Related

Routers / Switches :: Can't Access Remote System

Aug 19, 2011

I am trying to connect to my office PCs via VPN and/or RDP. The office uses Qwest DSL and has a dynamic IP address. I use DynDNS.org to keep the DNS updated with the WAN address of the router. However, any attempt to access the network fails. I have tried remote management access (I enabled it on the router) but that fails. I forwarded RDP ports on the router to one of the PCs but can't connect to it. I also set up a VPN server but cannot connect to it either. Something tells me that all requests to myoffice.homeip.net are not getting to my modem/router. I have even tried the IP associated with the name (Yes, I did check that it is correct!) but nothing works there either.

View 1 Replies View Related

Configure System To Connect To Remote Desktop Connection?

Nov 5, 2011

I want to know how to configure my system to connect to Remote Desktop Connection?

View 1 Replies View Related

Developing The System Remote Control Desktop From Mobile Phone?

Oct 23, 2012

I am developing the system remote control desktop from mobile phone through internet. I want how the connection is established between mobile phone and desktop through internet? What is the exact process of connection and internal structure of connection

View 1 Replies View Related

E System 2513 Laptop Is Not Working

Apr 14, 2012

I have an e system 2513 lap top that was wireless up until last tuesday when i got a new router installed by F10 togetVirgin. Nothing else in my house has been effected by it. Have tried Fn &F10 together but it still isnt working. Its currently got an ethernet cable attatched to it to get online.

View 5 Replies View Related

Belkin Routers :: N600 - Security System Is Not Working

Nov 1, 2012

A N600 Router Model F9J1102v1 router first installed in July 2012 with WPA-PSK, MAC Address Filtering and "Self Healing" enabled would not allow a new PC to connect via an RJ45 port. Belkin support ask for the unit to be reset to factory settings which is done and the Security system re-enabled again. Valid MAC Addresses start to be added and midway a PC is discovered in the Network without its MAC address added. Closer scrutiny reveals that another unknown device has also found a way into the router and that the 'Block' option on the MAC list is also failing to work. Anyone think of what one should do with this security shambles other than turn the thing off quick?

View 7 Replies View Related

Linksys Wireless Router :: E1200 System Suddenly Stops Working?

Oct 30, 2012

Right now I have my computer (iMac early 2012 summer purchase) plugged directly into the wall via ethernet cable for internet access.  I have only begun doing this in the past week because my E1200 wireless router has stopped working properly.  I have reinstalled and reset to factory settings and set up with Cisco Connect and setup manually over the past week troubleshooting every possible way I have ever known how. My internet, obviously, is working.  And when I set up the wireless network it connects properly and obtains an IP address and the lights on the back of the unit light up correspondingly and correct.  But I cannot connect to the internet via the router, wirelessly or plugged directly into it.  Yet when I take the internet cable and plug it straight into my computer it works.Mainly just need to know if this can be fixed or if I need to go return this unit and get a replacement.  The router was purchased two months ago and has not had any issues since I first set it up until a couple of weeks ago and my phone is using up all of my cellular data plan without being connected to my wi-fi...

View 1 Replies View Related

D-Link D-ViewCam :: Sound No Longer Working On Playback System And Exported Video

Jul 3, 2012

When I am viewing live recorded video through d-viewcam I can hear the audio. I currently have 2 camera recording 24/7. When I go to playback to play a certain clip, there is no sound at all. When I save a clip and click export audio, still no sound.

View 4 Replies View Related

Remote Desktop Not Working From Outside Of Network?

Feb 17, 2011

So i'm trying to set up remote desktop connection for my desktop at (xp pro, sp2).

I've went through all the steps:

- allowed users to connect remotely (system properties)

- added to firewall exceptions

- opened up port 3389

I've disabled firewall and virus protection for now as well to test.

It works fine when I try connecting from my laptop at home by opening up the remote desktop program, and entering the local static ip address that i've configured on the desktop (i.e. 192.168.x.x);

however, when I try to connect outside of this network (on the road or office), I can't seem to connect (yes, I replaced the ip 192.168.x.x with the public ip of the desktop which I got from whatsmyip.org). I also can't ping the public ip of the desktop (can only ping the 192.168.x.x ip of the desktop)

Again, router port is open to port 3389, firewall is turned off on both the desktop and laptop, and virus protection is off.

View 10 Replies View Related

Remote Desktop Stopped Working

Mar 30, 2012

My computer stopped being able to Remote Desktop to my server on my network. My backup software also doesn't recognize my server. But, I can access its folders using Windows Explorer. Any other PC on the network can remote desktop to the server and connect. What happened to my machine? This message appears when i try to connect: "Remote Desktop can't connect to the remote computer for one of the following reasons:

1) Remote access tot he server is not enabled

2) The remote computer is turned off

3)The remote computer is not available on the network

Make sure the remote computer is turned on and connected to the network, and that remote access is enabled."

My computer is:
AMD: Athlon 64 X2 5200+ 2991 MHz
Mobo: Gigabyte M57SLI-S4 v.2
RAM: 4GB Mushkin DDR2 PC2-6400
OS: Win 7 64bit
VC: Geforce GTX 470

View 1 Replies View Related

D-Link DIR-655 :: ITunes Remote App Not Working?

Feb 5, 2011

It worked fine with my last router. It just doesn't seem to connect securely. It comes up under my iTunes, but once I go to enter the code, it doesn't show up as completed. Also, a utorrent monitoring app cannot connect to my computer, which is set up right at my computers end, but won't connect at all from my phone over wi-fi.

View 14 Replies View Related

Cisco VPN :: 1812 Remote VPN Not Working

Jul 28, 2011

I have Cisco 1812 connected to ISP's router Cisco 870. Both routers have switch module and when I'm connected with PC to 870 I can connect via VPN to remote location.When I'm connected to 1812 remote VPN doesn't work.Client computers are connected to 1812 and they can surf on internet just fine.

View 4 Replies View Related

Run Remote Desktop Client Using CAT 5 Crossover Isn't Working

Aug 9, 2011

Attempts to run remote desktop client a laptop on a tower using a CAT 5 Crossover isn't working. After starting the remote desktop on the laptop, I'm asked to identify the other computer, which I do, and a remote desktop window with a black background pops up, as expected. But I expect an opportunity to login will be displayed after a second or so. That never happens. After about a minute this pops up:Remote Desktop Disconnected?Your Remote Desktop session has ended.The connection to the remote computer was lost, possibly due to network connectivity problems. Try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support.

My clients are impressed with my ability to setup their networks, Linksys routers with WIFI. But toss something unfamiliar into the mix, like this situation, and I'm pretty lost, pretty quick.

Environment:
Hospital's WIFI.
Laptop running XP Home with WIFI and Ethernet.
Tower running Win 7 Ultra with Ethernet.
Cat 5 crossover cable.

Goal:Configure laptop to access Hospital's WIFI. This is successful, I'm using it to post this. Configure laptop run a remote desktop with the tower as the server. The tower, running Win 7, has no monitor. I don't have a flat screen monitor, and didn't feel like dragging an 80 pound 24 inch Nokia into the hospital.After reading some sites while trying to figure this out, I gave the laptop the same group name, workgroup, as the tower.In my experience, starting the tower has been, turn it on, and it boots to Win 7. But I can't watch that happen without a monitor. I can't configure the the tower's network connections without a monitor either.I purchased the CAT 5 crossover cable yesterday, for this occasion. The label on the plastic bag it was packaged in had the word "Crossover" on it. I connect the CAT 5 to the laptop's single ethernet connection, and to the tower's Intel pro card. At home the laptop is on WIFI, the tower connects to the router.

View 4 Replies View Related

Can't Get Remote Desktop Working In Work Environment

Oct 4, 2011

I'm trying to use RDC to connect to my home PC from work. I've tested everything on my laptop from another network and the connection works fine but the same settings don't seem to work when I'm at work.

I'm pretty sure I have everything set up correctly. Using the default port forwarded to the desired computer.

View 1 Replies View Related

D-Link DIR-655 :: Remote Management Not Working In Some Cases

Mar 1, 2011

I can access the admin pages from inside the network.I can access the admin pages remotely from my iphone (safari).If I try and access them from my PC at work (IE6 or Google Chrome), I can access the router, give the password and get the status screen. But if I try and go to any other page on the router, it asks for the password again and takes me back to the status screen.I have Hardware B1 and firmware 2.0 (not upgraded it yet).

View 1 Replies View Related

Cisco VPN :: 1841 Remote Access Not Working Right

May 27, 2011

I have setup a remote access on our 1841 device, with split tunnel.
 
now i am able to connect via the vpn tunnel, and even ping and telnet into the cisco device, but when i try to ping any device past the 1841, the ping fails and no traffic is even been encrypted to go over the vpn traffic (looking at the vpn client statistics).
 
From the ciscos side, pings to the vpn client is failing, yet i see the vpn client in the routing table. 

Here is my config: 
 
cisco1841#sh run Building configuration...
Current configuration : 7682 bytes!version 12.4service timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname cisco1841!boot-start-markerboot-end-marker!logging buffered 51200

[Code].....

View 4 Replies View Related

Cisco VPN :: ASA5510 Remote Vpn Ipsec Not Working

Feb 29, 2012

I configured my cisco client with the info from the vpn wizard and get the following error :
 
error in the cisco vpn client when enabling the log : Invalid SPI size (log) + reason 412 the remote peer is no longer responding (application) message I see via the ASDM-IDM : Built inbound UDP connection for interface WAN
  
I'll explain briefly what I'm trying to do here :
 
* Remote vpn with windows users having cisco clients
* Group authentication and in the asa5510 LOCAL authentication
 
My WAN interface contains a public ip/29 I also defined a LAN interface with security level 100 in 10.0.60.0 255.255.252.0 range the vpn dhcp range I want to attribute to vpn users : 10.0.69.0/24
 
Basically I want users to initiate the vpn tunnel to the public IP and be able only to access the LAN range with the 10.0.60.0/22 range
 
ASA Version 8.2(5)
!
hostname xxxx
domain-name xxxx

[Code].....

View 7 Replies View Related

Cisco VPN :: Asa 5510 Remote Apps Not Working After Upgrade From 8.0 To 8.4

Nov 1, 2011

We have a 5510 ASA that was running 8.0 and were using it for clientless VPN access. Through this, we published bookmarks that linked to an internal Microsoft 2008R2 RemoteApps server, which users logged on to and then launched RemoteApps (basically being RDP sessions to apps on the server).All worked fine until we upgraded to 8.4 over the weekend and we now can't launch the RemoteApps. We can still login through the ASA, still click a bookmark to take us to the RemoteApps server's webpage, still then authenticate against the domain fine and still see the published apps. The problem now is when we launch the apps we get "this computer can't connect to the remote computer" messages and the app fails to launch. Nothing has changed on the RemoteApp server side, only the upgrade to 8.4.

View 2 Replies View Related

Cisco Routers :: RV220W Remote Administration Not Working

Oct 26, 2011

RV220W is at firmware v1.0.2.4 From: Administration / Management Interface / Web Accesss I have configured remote Management: Remote Management [x] EnabledAccess Type: All IP addressesPort Number: 8888Remote SNTP  [  ] not enabled
 
From within the LAN side I can connect to the router and administer via https://192.168.3.97:8888
 
Status / System Summary reports:WAN (Internet) Information (IP4)
Connection Type: Static
Connection State: Connected
IP Address: 207.180.139.242
NAT:  Enabled
But from the WAN side (using the same Win7 computer) I cannot connect via:  https://207.180.139.242:8888
 
This used to work.   Also not working:  PPTP logins.   ISP is RCN via cable modem, fixed IPs.
 
Have tried power cycling router - no luck. Have tried from PC with AV off and Win7 firewall off

View 5 Replies View Related

Cisco Routers :: Windows RDP Remote Desktop Not Working With WRVS4400N

Nov 16, 2010

I use RDP extensively on my LAN to use and manage 4 PCs running Win XP or Win7. My consumer-grade Cisco Linksys WRT610n crapped out after less than 2 years, so I thought I'd try the Cisco WRVS4400N to gain extra features like VPN. I have not enabled anything new on the router except for adding a second wireless SSID for guest use, although no bandwidth management or VLANs have been set up yet. Firmware version is 2.0.0.8.Since installing this router I have been unable to use Windows RDP on ANY of my computers on the LAN, whether I use the machine name or the IP address. I can ping every device on my network - print servers, NAS boxes, PCs, but no RDP. WHAT'S GOING ON?

View 6 Replies View Related

Cisco VPN :: ASA5505 Remote Access - Randomly Stops Working

May 9, 2013

I have noticed a problem recently that our Remote Access VPN will randomly stop working. I will be able to connect and enter my Username+Password and it says Connected, but I cannot ping Remote Resources. If I check VPN Client Statistics, it shows Many Packets Sent/Encrypted, but None Received. It seems this problem affects all devices at once, but leaves the L2L tunnels intact.
 
It seems to randomly start working for a while, and everything seems fine until it stops working again. I verified that it is not a firewall problem, and it occurs on multiple ISPs and computers.
 
We also have 2 Static L2L Tunnels, and 1 Dynamic L2L Tunnel all of which operate flawlessly. All sites/remote users use split tunneling.
 
Below is the config, I just added the keepalives on the RA Tunnel to see if it would work, I haven't noticed any difference yet. 
 
ASA Version 8.0(2)
!
hostname HQ-ASA5505
domain-name xxxxx.local

[Code]....

View 3 Replies View Related

Cisco VPN :: Framed IP Address Not Working For Remote Access VPN PS6120

Sep 7, 2011

I'm trying to achieve framed-ip-address/static ip address for some remote access vpn clients and ip allocation from pool dynamically for remaining remote access vpn clients. I've configured my asa [URL].
 
I'm using local database for user authentication. Remote users can connect and always gets IP address from pool only and never gets the framed-ip I configured for those particular users.

View 3 Replies View Related

Sharing :: Belkin N750 New Router - Remote Desktop Connection Not Working?

Jan 20, 2012

I have recently upgraded my router to a Belkin N750 DB and am having issues getting remote desktop connection working. Previously I had a Netgear router and it was working no problems at all.I have port forwarded (virtual server on Belkin) port 3389 TCP to the servers IP address.I can get Remote desktop connection to work when I am within my LAN by just typing the computers name.However when I try to connect via the IP address, as I would if I were away from home, then I get the message that says "remote desktop cannot connect for one of these reasons

1) remote access not enabled (it is because it worked before)
2) remote computer is turned off (no it isn't)
3) remote computer is no available" (yes it is cause can connect from LAN)

Turned off static IP for my server and let the router assign IP, and changed the IP address in the port forward, same, no connection.Double, triple checked my IP address, as this obviously changed when I plugged in the new router.Have updated to latest firmware for router and NIC.

View 14 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Remote Management Port Is Not Working?

Feb 25, 2013

Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : TM

The Remote Management Port is not working correctly. For whatever port I set, it will uses port 80 to access.

View 2 Replies View Related

D-Link DIR-655 :: After Upgrading To Firmware 1.35 Remote Desktop Not Working On Home Network

Mar 22, 2013

I was using Remote Desktop between two home computers hard wired through the router and a switch.  Now after upgrading to firmware 1.35 I can't get remote desktop to connect. I get an error that I may not have permission, etc.  I have the DIR 655 ver A and am running Windows 7 professional on both computers.

View 5 Replies View Related

Cisco Routers :: RV042 After Configuring DMZ / Remote Management Stopped Working

Sep 30, 2012

I have a 6 month old RV042 with the newest firmware (v4.2.1.02). Over the weekend I configured the DMZ which after a lot of trial and error, was able to get working. Prior to configuring DMZ, I was able to log in with remote management. However now remote management no longer works. I've tried:

- Rebooting the router
- Turning the firewall off/on
- Turning remote management off/on
- Changing the remote management port
 
The only step I haven't taken is resetting the router back to factory defaults and trying to reconfigure it all again. This router is so finicky I have no faith I'd be able to get my current functionality back again.

View 2 Replies View Related

Cisco VPN :: All Remote Wireless IPSec Remote Clients Fail Connecting To ASA 5500

Sep 12, 2012

We have two ASA 5500 series Firewalls running 8.4(1).  One in New York, another in Atlanta.They are configured identically for simple IPSecV1 remote access for clients.  Authentication is performed by an Radius server local to each site.
 
There are multiple IPSec Site-to-Site tunnels on these ASA's as well but those are not affected by the issues we're having.First, let me start with the famous last words, NOTHING WAS CHANGED.
 
All of a sudden, we were getting reports of remote users to the Atlanta ASA timing out when trying to bring up the tunnel.  They would get prompted for their ID/Password, then nothing until it times out.Sames users going to the NY ASA are fine.After extensive troubleshooting, here is what I've discovered. Remote clients will authenticate fine to the Atlanta Firewall ONLY IF THEY ARE USING A WIRED CONNECTION.
 
If they are using the wireless adapter for their client machine, they will get stuck trying to login to Atlanta.These same clients will get into the New York ASA with no problems using wired or wireless connections.Windows 7 clients use the Shrewsoft VPN client and Mac clients use the Cisco VPN client.  They BOTH BEHAVE the same way and fail to connect to the Atlanta ASA if they use their wireless adapter to initiate the connection.
 
Using myself as an example.
 
1. On my home Win 7 laptop using wireless, I can connect to the NY ASA with no issues. 
 
2. The same creditials USED to work for Atlanta as well but have now stopped working.  I get stuck until it times out.
 
3. I run a wire from my laptop to the FiOS router, then try again using the same credentials to Atlanta and I get RIGHT IN.
 
This makes absolutely no sense to me.  Why would the far end of the cloud care if I have a wired or wireless network adapter?  I should just be an IP address right?  Again, this is beyond my scope of knowledge.We've rebuilt and moved the Radius server to another host in Atlanta in our attempts to troubleshoot to no avail.  We've also rebooted the Atlanta Firewall and nothing changed.
 
We've tried all sorts of remote client combinations.  Wireless Internet access points from different carriers (Clear, Verizon, Sprint) all exhibit the same behavior.  Once I plug the laptops into a wired connection, BAM, they work connecting to Atlanta.  The New York ASA is fine for wired and wireless connections.  Same with some other remote office locations that we have.
 
Below I've detailed the syslog sequence on the Atlanta ASA for both a working wired remote connection and a failed wireless connection.  At first we thought the AAA/Radius server was rejecting us but is shows the same reject message for the working connection.  Again, both MAC and Windows clients show the same sequence.Where the connection fails is the "IKE Phase 1" process.

-------------------------------------------------------------------------------------------------------------------------
WORKING CONNECTION
-------------------------------------------------------------------------------------------------------------------------
 %ASA-6-713172: Automatic NAT Detection Status: Remote end is|is not behind a NAT device This end is|is not behind a NAT device
NAT-Traversal auto-detected NAT.
 %ASA-6-113004: AAA user aaa_type Successful: server = server_IP_address, User = user
 %ASA-6-113005: AAA user authentication Rejected: reason = string: server = server_IP_address, User = user

[code]...

View 1 Replies View Related

Wireless :: Remote Desktop Can't Connect To Remote Connection

Mar 9, 2011

On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.

View 1 Replies View Related

Xp System - Not Able To Take RDP?

Apr 25, 2012

I am not able to RDP from xp system

View 1 Replies View Related

Cannot Connect LAN On System

Apr 25, 2012

i want to setup lan on my laptop but there is no option for it, pls how do go about it?

View 1 Replies View Related

Broadband :: Tools Can't Find Working Off Line Or Working Online

May 9, 2011

XP Home edition, went to tools can't find working off line or working online to make sure off line is not checked so I can get on line DSL Verizon , Wireless router, wireless switch in on, on the cpu

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved