D-Link D-ViewCam :: How To Setup Recording On DCS-932L
Mar 27, 2013How to setup recording on dcs 932l?
View 1 Replies
ADVERTISEMENT
D-Link D-ViewCam :: Recording Motion All Night With DCS-932l?
Dec 20, 2012I have a DCS-932L camera setup in my living room with motion detection activated in DView. During the day it works great, but after nightfall the camera shows random lines in the [poor] video. These lines are being picked up as motion and as such the camera records all night long taking up massive amounts of disk space. Even when I put the camera motion detection on 'lowest' value, it still picks it up.
View 10 Replies View RelatedD-Link D-ViewCam :: How To Use DCS-932l With It
Apr 17, 2012How do i use dcs-932l with d-viewcam. I tryed to connect but d-viewcam does not recognize model.
View 1 Replies View RelatedD-Link D-ViewCam :: DCS-932L - Cannot Playback Any Videos Recorded
Apr 1, 2012I have just purchased 3 DCS-932L'S and installed 3.11 D-ViewCam software. I have done my best to configure the mainconsole correctly so that my cam's will record on motion based occurances on a weekly schedule of 24 hours a day everyday. I have a lot of evidence that the system is recording as when I have the console open that there is motion detected and there are 3 folders in my nas unit that has tons of .dat files in them. My problem comes in when using the playback system. When I select the search by date/time button and locate the folder that is for a the camera I am interested in playing video for the results never show up!
View 1 Replies View RelatedD-Link D-ViewCam :: DCS-932L - Live Streaming Over Internet
Dec 21, 2012I have 3 DCS-932L connected to DviewCAM 3.3 Device pack 1.4.2. When I open the DviewCAM main console I have picture. When I activate network service (live streaming) options under port: 8080 and webserver port: 801, it allows a visual of the DviewCAM GUI but no live streaming over the internet. [code]
View 5 Replies View RelatedD-Link D-ViewCam :: DCS-932L Does Not Record Audio In Sync With Video?
Apr 16, 2011When I view my DCS-932L camera in the Main Console of DViewCam, I can here the sounds in the room being viewed. But if I record the video and play it back, there is no audio on the playback. I have the microphone on the camera enableI now have sound recording, however, the audio is about 3 seconds behind the video. Is there a setting somewhere to keep them synchronized? I have checked all the video sync checkboxes I can find.
View 4 Replies View RelatedD-Link D-ViewCam :: DCS-932l Remote Streaming / Recorded Viewing As Part Of Server Software
Aug 10, 2012I have latest 3.3 dlink d-view cam software and a dcs-932l ip camera.I noticed the remote streaming and remote recorded viewing (ports 5150 and 5160) as part of the server software. I know if i browse to my ip of my pc it allows me to view both services on html via windows plugin visual basic addon. My question is what iOS app and Mac OS X app will allow me to remotely monitor my dviewcam softwares network service for both live view and recorded view.
View 1 Replies View RelatedD-Link D-ViewCam :: 3.3 / Setup 4 Cameras To View With Remote Live View?
Apr 12, 2013I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies View RelatedD-Link DCS-942L :: Camera Is Not Recording In SD Card
Dec 27, 2012i bought wireless camera dcs942l everything works but my sd card 32 gb is not recording the camera is not recording in my sd card i formated sd card still not recording camera works good quality picture network working but not recording on my sd card and i can not record in my computer
View 5 Replies View RelatedD-Link DCS-942L :: Continuous Recording To External PC?
Feb 28, 2013I would like to record the camera feed (per 5 min. files) on my server (ubuntu or windows)
I Installed a FTP server and tried the option "always" in the "video clip" section, but unfortunately, it seem not possible to record more than 10 seconds files every 60 seconds . I think that this is a bug ?
Do you know, if we have a possibility to record the camera feed, I would like to manage it from the webcam or with an external program running as a service.
D-Link DCS-942L :: Video Recording To SD Card Not Working
Oct 25, 2011I can't get the Video to record to the SD card, nothing happens. Snapshots record fine.
Firmware is 1.01
D-Link DCS Network Camera :: 950G And 5220 - Way Of Recording On NAS?
Jul 30, 2010I need configuration of IPCAM dcs950g and dcs5220 for recording on a NAS which is DNS-313.My DNS-313 is connected in a network which can be access both locally and remotely, same as my both model of IPCAM. How should i type in the path textbox input?
View 1 Replies View RelatedD-Link DCS-942L :: Camera Filled Sd Card And Stopped Recording
Apr 10, 2013It didn't fill it up completely, it stopped at the 200 meg free mark, however I have cyclic checked (which btw is not mentioned anywhere in the manual). I assumed this option would cycle by deleting the oldest file to continue recording.
View 1 Replies View RelatedD-Link DCS Network Camera :: 2121 - Recording Stopped Using Samba?
Jan 28, 2012I record on motion to an external drive using samba. I get around 20MB before it just stops recording (samba full condition signaled). This is a one TB drive with nothing much on it.
View 2 Replies View RelatedD-Link DCS Network Camera :: DCS-2121 - Scheduled Recording Is Not Working
Dec 27, 2010my DCS-2121 :
The scheduled recording or scheduled snapshots is not working. I am running the camera standalone and using the web based configuration, storing the images or avi's on a ftp or samba server.
No matter what i specify, it records when triggered (by motion in my setup). All the other settings like, samba, ftp, video, motion detection, and so on is working fine - but I can't configure it to only record like between 10-16 every day. It records all the time - no matter what I select and what I enter in the schedule scheme.
D-Link D-ViewCam :: Possible Enhancements / Improvements On New DCS-900 V3.0
Jan 27, 2010I would like to start a new thread on possible enhancements/improvements on the new D-ViewCam v3.0.Allow Events (General Motion detection) to be visible in Playback timeline/period selection, similar to the way of Backup (and Remote Playback) timeline/period selection. Fixed in 3.01.Allow 30-second steps increments forward/ backward in playback. Current minimum is 1 minute.Allow jump to event during playback, from either log-viewer or inside playback (via extra button), similar to version 2.0xMention 64-bit compatibility in User- documentation/ datasheet (it is not there yet)Allow/implement multi-channel simulcast [remote] Playback (it is pre-wired) Allow/ implement multi-channel remote viewerBug: Fix Signal Lost event visibility in time/period selection (it does not show these events)Bug: Fix 64-bit hi-res (>1280x1024) "Resource" error. Fixed in 3.11.Bug: Fix Playback.exe crash when saving image/snapshot, while supplying wrong extension (reproducible by: Save as jpg, then supply name.asf, and it will die)Road_runner: Option to move app-window/screen to other monitor and/or resizeToppy: Support older model cameras (DCS-900/950)Toppy: Support multi-screen display (multiple windows)disaster: Option for a playback list similar to V2.03, select motion separately, instead of single stream.disaster: Allow for GUI to select cross-mignight period (can be done manually by setting start-date and -time)disaster: Elaborate more on Smart Guard in Docsdisaster: Allow for higher free space percentage threshold for overwriting old recordings disaster: Allow to program autopatrol to start and end on a scheduled timeBug: Use of < character in password causes deletion of ALL defined remote serversZippyDan: Remote Live Playback: playing video from more than one camera at the same remote site at the same time.
View 9 Replies View RelatedD-Link D-ViewCam :: DCS-930 / 932 - Add IP Cameras To Mydlink App On Android
Jan 16, 2013i have multiple DCS-930 and DCS-932 at my home. I also have other IP cameras. Is there a way to add IP cameras to the mydlink app on Android, iPad, and web?
View 1 Replies View RelatedD-Link D-ViewCam :: Is It Possible To Use VLC To View Video From A DCS-930L?
May 3, 2011Given that D-View Cam stinks (will only run full-screen), is there a way to view the DCS-930L using VLC?
View 14 Replies View RelatedD-Link D-ViewCam :: View DCS-2121 From Remote PC Without Using WEB?
Oct 22, 2011My Brother-in-law, who lives in Singapore, uses his DCS-2121s (2x) for monitoring his newborn and it works great!
Me and my wife, who lives here in the US, always views those IPcams through my web browser from my PC (firefox 7.1).
I was just wondering if there is a different way to watch those cameras using my computer. I was looking for a dedicated D-link APP or Program so I don't have to use the browser anymore.
BTW, my brother uses dyndns with his DCS-2121.
D-Link D-ViewCam :: DCS3411 Which DNR / NVR Will Be Able To Support All Cameras And How
Jun 20, 2012I am doing a project with 6 DCS3411, 4DCS 7110 and 1DCS 7410. My question is which DNR /NVR will be able to support all the cameras and how. because most of the say they can support up to nine.
View 1 Replies View RelatedD-Link D-ViewCam :: DCS930l - Remote Viewer Can See One Camera But Not The Others?
Feb 22, 2013I have a setting where we are using some DCS930l cameras connected to a 2003 server. We are using the remote viewer and can see one camera but not the others. We have 5 cameras. We try to drag and drop the other cameras, but nothing shows up. Only the 1.
View 1 Replies View RelatedD-Link D-ViewCam :: Unable To Connect Two 930L Cameras?
Jul 22, 2011I have installed two 930L cameras which work fine via mydlink. When I attempt to connect them to D-View Cam 3.11 they fail to connect or will not stay connected.I first tried connecting to the router with both cameras in the same room as the router. One will connect and stay connected but the other will connect and freeze or not connect at all. If I move th GOOD camera out of the room, it will not connect.Do I have a router issue? I am using Verizon FIOS with their supplied router (Actiontec, I think). My wireless laptop connects but signal strength is never 5 bars.
View 2 Replies View RelatedD-Link D-ViewCam :: DCS-2210 Using A Custom IP-camera View Possible?
Oct 31, 2012Is it possible to configure a 3rd party product with D-Link D-Cam View program? We want to combine three D-Link IP cameras DCS-2210 with a epiphan VGADVI Broadcaster (url...). The epiphan product can provide a http mjpeg video stream that can be displayed with a normal Webbrowser, VLC or other programs like that.I can connect to the broadcaster with this URL...
View 1 Replies View RelatedD-Link D-ViewCam :: DCS 5300G Camera / Auto-detect Won't Work?
Mar 14, 2011I having issues with DView 3.11 on a WinXP Professional with SP3.There are 4 DCS 5300G cameras wired to the router.I can see the cameras using IE, but when I try to configure the DView in the camera section with the autodetect button it will show an error that the camera cannot be identified.I had checked the IP address, port, user & pass everything is ok. I even hard reseted one of the cameras and it won't work.
View 1 Replies View RelatedD-Link D-ViewCam :: Unable To Find Camera (942l) On Network
Apr 3, 2012Just got this & set it up today. Wanted to buy a couple more in the next few days; but wanted to test out the D-Viewcam service. The application (D-Viewcam) is not able to find my camera.I have 'ticked' the uPNP & the forward; tried to disable it as well. No luck.
Camera 942l is on ver 1.1
D-Viewcam = v 3.2
Both reside on the same LAN
I'm able to view the camera on the browser. And on my phone.
D-Link D-ViewCam :: 3.2 Remote Live Viewer Not Showing All Cameras?
Oct 7, 2011i have this problem when using Remote Live Viewer the Web Remote Client of DviewCam 3.2: i can only see one camera at a time, even more i have to stop playing the current one if i want to change the camera. the viewer shows me the grid for playing many cameras but i don't know if they can be played simultaneously. I can select any camera and will play so i don't think it's an access problem.
View 2 Replies View RelatedD-Link D-ViewCam :: DCS-2132L No Longer Accessible - Port 80 Not Working
Mar 17, 2013Taking another look at Dview cam today after not touching it for 3 months after initial install.The dcs-2132L can't connect.I can to the 2132L directly... I changed the port as a test.. Port 80 wasn't working originally.
[url]....
D-Link D-ViewCam :: IPhone App Keeps Video Stream Going Even After Phone Locks?
Feb 26, 2012This causes massive 3G data to be used. If you don't close the app first it just keeps streaming and eating data + battery.This data screen cap is for 10 minutes after locking the phone with the app open.When the phone locks, the app should kill the video streaming.
View 5 Replies View RelatedD-Link D-ViewCam :: 3.2 Doesn't Work With More Than Two Cameras Monitored (942-L / 5222-L)
Jul 10, 2012I have (2) 942-L, and (1) 5222-L on one network. port forwarding set on router; (942) 192.168.1.3:1024, (942) 192.168.1.4:1025, and (5222) 192.168.1.8:80. no matter if all 3 are connected to dViewCam, only two will work at a time. Disconnect any third, and they work fine. reconnect 3rd, and one disconnects intermittently. On a side note, if I run a different program on another computer (iMac); i.e. IP Camera Viewer, they all work fine. I know, I know, but I like DViewCam, because it's the only thing running the PC computer.
View 3 Replies View RelatedD-Link D-ViewCam :: DCS-930L Cameras Missing Or Corrupted Files
Nov 17, 2010I just purchased two DCS-930L cameras. They are both installed and running fine over wireless. I can view them via a web browser, however, I cannot get D-ViewCam to work. I installed the latest version (3.1.1). As soon as I launch the Main Console it crashes and I get the "Missing or Corrupted Files error code 268435457". I saw the other post in terms of change the display settings on my PC to 1280X768, however, that does not work. I also have User Account Control (UAC) turned off.
View 7 Replies View RelatedD-Link D-ViewCam :: DCS-5300 And DCS-6620 No Longer Connected With Software
Dec 24, 2009I originally began using my D-Link cameras, two DCS-5300s and a single DCS-6620, with the IP Surveillance software. I see that the software is no longer recommended and may no longer be available. Any explanation for the move to the DView Cam software ? If I were to convert over to DView Cam from IP Surveillance will I lose any functionality or features. Will there be any functionality or features gained ?
View 6 Replies View RelatedD-Link D-ViewCam :: DCS-930L - Unable To View Video On Android Devices
Aug 7, 2011Setup my DCS-930L for DDNS (Dynamic Domain Name Server) so I can access the DCS-930L via the Internet (couldn't access the camera half the the time while on vacation using mydlink) and can now access the camera using my laptop, Android Thrive, and Motorola Droid 3 via the URL I've created but can only see the video when using the laptop.
I have the DCS-930L set to Java but when I log into the camera with the Thrive or Droid 3 (both Android devices) I don't get video. I can make changes to the camera settings and everything else you can do when logged into the camera but just can't see the video. If I change the 'View Mode' in the video setup to 'Image', I will get a picture on all three devices (Thrive, Droid 3, and laptop).
What do I need on the Droid 3 & Thrive so I can see the video when I log into the DCS-930L with an Android device?
D-Link D-ViewCam :: DCS-2121 - License Is Invalid (Error Code 2268435460)
Jan 12, 2011"The license is invalid." (Error code:2268435460) it happens with all versions tested on several PCs (Win2003 Server, WinXP). Already tried to reboot, edit the registry, etc but no luck. Using 3 dcs 2121?
View 7 Replies View Related