D-Link D-ViewCam :: How To Use DCS-932l With It
Apr 17, 2012How do i use dcs-932l with d-viewcam. I tryed to connect but d-viewcam does not recognize model.
View 1 Replies
ADVERTISEMENT
D-Link D-ViewCam :: How To Setup Recording On DCS-932L
Mar 27, 2013How to setup recording on dcs 932l?
View 1 Replies View RelatedD-Link D-ViewCam :: DCS-932L - Cannot Playback Any Videos Recorded
Apr 1, 2012I have just purchased 3 DCS-932L'S and installed 3.11 D-ViewCam software. I have done my best to configure the mainconsole correctly so that my cam's will record on motion based occurances on a weekly schedule of 24 hours a day everyday. I have a lot of evidence that the system is recording as when I have the console open that there is motion detected and there are 3 folders in my nas unit that has tons of .dat files in them. My problem comes in when using the playback system. When I select the search by date/time button and locate the folder that is for a the camera I am interested in playing video for the results never show up!
View 1 Replies View RelatedD-Link D-ViewCam :: Recording Motion All Night With DCS-932l?
Dec 20, 2012I have a DCS-932L camera setup in my living room with motion detection activated in DView. During the day it works great, but after nightfall the camera shows random lines in the [poor] video. These lines are being picked up as motion and as such the camera records all night long taking up massive amounts of disk space. Even when I put the camera motion detection on 'lowest' value, it still picks it up.
View 10 Replies View RelatedD-Link D-ViewCam :: DCS-932L - Live Streaming Over Internet
Dec 21, 2012I have 3 DCS-932L connected to DviewCAM 3.3 Device pack 1.4.2. When I open the DviewCAM main console I have picture. When I activate network service (live streaming) options under port: 8080 and webserver port: 801, it allows a visual of the DviewCAM GUI but no live streaming over the internet. [code]
View 5 Replies View RelatedD-Link D-ViewCam :: DCS-932L Does Not Record Audio In Sync With Video?
Apr 16, 2011When I view my DCS-932L camera in the Main Console of DViewCam, I can here the sounds in the room being viewed. But if I record the video and play it back, there is no audio on the playback. I have the microphone on the camera enableI now have sound recording, however, the audio is about 3 seconds behind the video. Is there a setting somewhere to keep them synchronized? I have checked all the video sync checkboxes I can find.
View 4 Replies View RelatedD-Link D-ViewCam :: DCS-932l Remote Streaming / Recorded Viewing As Part Of Server Software
Aug 10, 2012I have latest 3.3 dlink d-view cam software and a dcs-932l ip camera.I noticed the remote streaming and remote recorded viewing (ports 5150 and 5160) as part of the server software. I know if i browse to my ip of my pc it allows me to view both services on html via windows plugin visual basic addon. My question is what iOS app and Mac OS X app will allow me to remotely monitor my dviewcam softwares network service for both live view and recorded view.
View 1 Replies View RelatedD-Link D-ViewCam :: Possible Enhancements / Improvements On New DCS-900 V3.0
Jan 27, 2010I would like to start a new thread on possible enhancements/improvements on the new D-ViewCam v3.0.Allow Events (General Motion detection) to be visible in Playback timeline/period selection, similar to the way of Backup (and Remote Playback) timeline/period selection. Fixed in 3.01.Allow 30-second steps increments forward/ backward in playback. Current minimum is 1 minute.Allow jump to event during playback, from either log-viewer or inside playback (via extra button), similar to version 2.0xMention 64-bit compatibility in User- documentation/ datasheet (it is not there yet)Allow/implement multi-channel simulcast [remote] Playback (it is pre-wired) Allow/ implement multi-channel remote viewerBug: Fix Signal Lost event visibility in time/period selection (it does not show these events)Bug: Fix 64-bit hi-res (>1280x1024) "Resource" error. Fixed in 3.11.Bug: Fix Playback.exe crash when saving image/snapshot, while supplying wrong extension (reproducible by: Save as jpg, then supply name.asf, and it will die)Road_runner: Option to move app-window/screen to other monitor and/or resizeToppy: Support older model cameras (DCS-900/950)Toppy: Support multi-screen display (multiple windows)disaster: Option for a playback list similar to V2.03, select motion separately, instead of single stream.disaster: Allow for GUI to select cross-mignight period (can be done manually by setting start-date and -time)disaster: Elaborate more on Smart Guard in Docsdisaster: Allow for higher free space percentage threshold for overwriting old recordings disaster: Allow to program autopatrol to start and end on a scheduled timeBug: Use of < character in password causes deletion of ALL defined remote serversZippyDan: Remote Live Playback: playing video from more than one camera at the same remote site at the same time.
View 9 Replies View RelatedD-Link D-ViewCam :: DCS-930 / 932 - Add IP Cameras To Mydlink App On Android
Jan 16, 2013i have multiple DCS-930 and DCS-932 at my home. I also have other IP cameras. Is there a way to add IP cameras to the mydlink app on Android, iPad, and web?
View 1 Replies View RelatedD-Link D-ViewCam :: Is It Possible To Use VLC To View Video From A DCS-930L?
May 3, 2011Given that D-View Cam stinks (will only run full-screen), is there a way to view the DCS-930L using VLC?
View 14 Replies View RelatedD-Link D-ViewCam :: View DCS-2121 From Remote PC Without Using WEB?
Oct 22, 2011My Brother-in-law, who lives in Singapore, uses his DCS-2121s (2x) for monitoring his newborn and it works great!
Me and my wife, who lives here in the US, always views those IPcams through my web browser from my PC (firefox 7.1).
I was just wondering if there is a different way to watch those cameras using my computer. I was looking for a dedicated D-link APP or Program so I don't have to use the browser anymore.
BTW, my brother uses dyndns with his DCS-2121.
D-Link D-ViewCam :: DCS3411 Which DNR / NVR Will Be Able To Support All Cameras And How
Jun 20, 2012I am doing a project with 6 DCS3411, 4DCS 7110 and 1DCS 7410. My question is which DNR /NVR will be able to support all the cameras and how. because most of the say they can support up to nine.
View 1 Replies View RelatedD-Link D-ViewCam :: DCS930l - Remote Viewer Can See One Camera But Not The Others?
Feb 22, 2013I have a setting where we are using some DCS930l cameras connected to a 2003 server. We are using the remote viewer and can see one camera but not the others. We have 5 cameras. We try to drag and drop the other cameras, but nothing shows up. Only the 1.
View 1 Replies View RelatedD-Link D-ViewCam :: Unable To Connect Two 930L Cameras?
Jul 22, 2011I have installed two 930L cameras which work fine via mydlink. When I attempt to connect them to D-View Cam 3.11 they fail to connect or will not stay connected.I first tried connecting to the router with both cameras in the same room as the router. One will connect and stay connected but the other will connect and freeze or not connect at all. If I move th GOOD camera out of the room, it will not connect.Do I have a router issue? I am using Verizon FIOS with their supplied router (Actiontec, I think). My wireless laptop connects but signal strength is never 5 bars.
View 2 Replies View RelatedD-Link D-ViewCam :: DCS-2210 Using A Custom IP-camera View Possible?
Oct 31, 2012Is it possible to configure a 3rd party product with D-Link D-Cam View program? We want to combine three D-Link IP cameras DCS-2210 with a epiphan VGADVI Broadcaster (url...). The epiphan product can provide a http mjpeg video stream that can be displayed with a normal Webbrowser, VLC or other programs like that.I can connect to the broadcaster with this URL...
View 1 Replies View RelatedD-Link D-ViewCam :: DCS 5300G Camera / Auto-detect Won't Work?
Mar 14, 2011I having issues with DView 3.11 on a WinXP Professional with SP3.There are 4 DCS 5300G cameras wired to the router.I can see the cameras using IE, but when I try to configure the DView in the camera section with the autodetect button it will show an error that the camera cannot be identified.I had checked the IP address, port, user & pass everything is ok. I even hard reseted one of the cameras and it won't work.
View 1 Replies View RelatedD-Link D-ViewCam :: Unable To Find Camera (942l) On Network
Apr 3, 2012Just got this & set it up today. Wanted to buy a couple more in the next few days; but wanted to test out the D-Viewcam service. The application (D-Viewcam) is not able to find my camera.I have 'ticked' the uPNP & the forward; tried to disable it as well. No luck.
Camera 942l is on ver 1.1
D-Viewcam = v 3.2
Both reside on the same LAN
I'm able to view the camera on the browser. And on my phone.
D-Link D-ViewCam :: 3.2 Remote Live Viewer Not Showing All Cameras?
Oct 7, 2011i have this problem when using Remote Live Viewer the Web Remote Client of DviewCam 3.2: i can only see one camera at a time, even more i have to stop playing the current one if i want to change the camera. the viewer shows me the grid for playing many cameras but i don't know if they can be played simultaneously. I can select any camera and will play so i don't think it's an access problem.
View 2 Replies View RelatedD-Link D-ViewCam :: DCS-2132L No Longer Accessible - Port 80 Not Working
Mar 17, 2013Taking another look at Dview cam today after not touching it for 3 months after initial install.The dcs-2132L can't connect.I can to the 2132L directly... I changed the port as a test.. Port 80 wasn't working originally.
[url]....
D-Link D-ViewCam :: IPhone App Keeps Video Stream Going Even After Phone Locks?
Feb 26, 2012This causes massive 3G data to be used. If you don't close the app first it just keeps streaming and eating data + battery.This data screen cap is for 10 minutes after locking the phone with the app open.When the phone locks, the app should kill the video streaming.
View 5 Replies View RelatedD-Link D-ViewCam :: 3.2 Doesn't Work With More Than Two Cameras Monitored (942-L / 5222-L)
Jul 10, 2012I have (2) 942-L, and (1) 5222-L on one network. port forwarding set on router; (942) 192.168.1.3:1024, (942) 192.168.1.4:1025, and (5222) 192.168.1.8:80. no matter if all 3 are connected to dViewCam, only two will work at a time. Disconnect any third, and they work fine. reconnect 3rd, and one disconnects intermittently. On a side note, if I run a different program on another computer (iMac); i.e. IP Camera Viewer, they all work fine. I know, I know, but I like DViewCam, because it's the only thing running the PC computer.
View 3 Replies View RelatedD-Link D-ViewCam :: DCS-930L Cameras Missing Or Corrupted Files
Nov 17, 2010I just purchased two DCS-930L cameras. They are both installed and running fine over wireless. I can view them via a web browser, however, I cannot get D-ViewCam to work. I installed the latest version (3.1.1). As soon as I launch the Main Console it crashes and I get the "Missing or Corrupted Files error code 268435457". I saw the other post in terms of change the display settings on my PC to 1280X768, however, that does not work. I also have User Account Control (UAC) turned off.
View 7 Replies View RelatedD-Link D-ViewCam :: DCS-5300 And DCS-6620 No Longer Connected With Software
Dec 24, 2009I originally began using my D-Link cameras, two DCS-5300s and a single DCS-6620, with the IP Surveillance software. I see that the software is no longer recommended and may no longer be available. Any explanation for the move to the DView Cam software ? If I were to convert over to DView Cam from IP Surveillance will I lose any functionality or features. Will there be any functionality or features gained ?
View 6 Replies View RelatedD-Link D-ViewCam :: DCS-930L - Unable To View Video On Android Devices
Aug 7, 2011Setup my DCS-930L for DDNS (Dynamic Domain Name Server) so I can access the DCS-930L via the Internet (couldn't access the camera half the the time while on vacation using mydlink) and can now access the camera using my laptop, Android Thrive, and Motorola Droid 3 via the URL I've created but can only see the video when using the laptop.
I have the DCS-930L set to Java but when I log into the camera with the Thrive or Droid 3 (both Android devices) I don't get video. I can make changes to the camera settings and everything else you can do when logged into the camera but just can't see the video. If I change the 'View Mode' in the video setup to 'Image', I will get a picture on all three devices (Thrive, Droid 3, and laptop).
What do I need on the Droid 3 & Thrive so I can see the video when I log into the DCS-930L with an Android device?
D-Link D-ViewCam :: DCS-2121 - License Is Invalid (Error Code 2268435460)
Jan 12, 2011"The license is invalid." (Error code:2268435460) it happens with all versions tested on several PCs (Win2003 Server, WinXP). Already tried to reboot, edit the registry, etc but no luck. Using 3 dcs 2121?
View 7 Replies View RelatedD-Link D-ViewCam :: DCS-1130 - Record Video Upon Motion Detection With Software?
Aug 2, 2012I'm puzzled that you don't seem to be able to do this (a basic feature). Seems like when motion is detected you can only send an email or do the DI/DO thing.
I can do this quite well via the direct web-based interface (1.03 and earlier at least) on the DCS-1130, but the 932L doesn't have video record on motion option (baffled as to why not there too, but that's another issue). So, I was thinking of using the DCS software to get motion-detected recording out of the 932L, but looks like I can't do that either?
D-Link D-ViewCam :: Older Cameras Like DCS 2100 / 3220 Not Fully Supported
Feb 17, 2010Downloaded DVIEWCam 3.0. Are there any plans on supporting older Dlink Cameras like the DCS-2100 etc ...? Even my DCS-3220 is not fully supported, however the 3420 worked in the config menu.
View 3 Replies View RelatedD-Link D-ViewCam :: Sound No Longer Working On Playback System And Exported Video
Jul 3, 2012When I am viewing live recorded video through d-viewcam I can hear the audio. I currently have 2 camera recording 24/7. When I go to playback to play a certain clip, there is no sound at all. When I save a clip and click export audio, still no sound.
View 4 Replies View RelatedD-Link D-ViewCam :: 3.3 / Setup 4 Cameras To View With Remote Live View?
Apr 12, 2013I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies View RelatedDCS-932L Home Network Camera Does Not Show Up?
Feb 23, 2012My new DCS-932L home network camera does not show up in MY DEVICES acct!! Only my FIRST camera show up, therefore I cannot access my SECOND camera remotely on my phone or other computer! When I ran the cd installation for the second camera, it could not access my network.....However I was able to install camera manually....it is working fine, I am getting my motion detection e-mails notification, I am able to access camera thru my laptop....What do i have to do in order to my second camera to show in MY DEVICES Acct? so I can access camera remotely?
View 3 Replies View RelatedLinksys Cable / DSL :: Connect X3500 With DLink DCS-932L Wireless IP CAM?
Apr 10, 2013I have a new gateway X3500, I'm trying to connect my wireless ip cam (Dlink DCS 932L). I have tried to use wpa-wpa2-wep but nothing to do. I update the firmware
View 1 Replies View RelatedTP-Link ADSL2+ Wireless :: TD-W8970 - TP-LINK USB Printer Controller Is Causing BSOD?
Apr 12, 2013Region : Portugal
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
Two week ago I bought the TD-W8970 ADSL router model. Im using a canon pixma IP4700 printer connected to the router USB print server port and everything is working without any issues if I just look to the router functionalities.
However since that Ive installed TP-LINK USB Printer Controller, my both computers (desktop with windows 7 and laptop with windows 8) are getting very often some BSOD.
I was editing all files automatically generated by windows on this cases and if seems that the cause of this issue is the file TplinkUDSMBus.sys (installed by USB Printer Controller).
To check the impact of this, Ive uninstalled the TP-LINK USB Printer Controller software from my laptop and I dont have any BSOD since 5 days ago. In the desktop Im still have the same issue.
The router print server is a nice functionality and I really want to use it.
TP-Link Dual-Band Wireless :: VOIP Dropped Calls Over TP-Link WDR4300
Feb 14, 2013Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Comcast
I just upgraded my DLink DIR655 to WDR4300. My VOIP service has worked for the last 5 years. But with WDR4300, I'm frequently experiencing dropped calls. The call will be cut off every 20 seconds or so. This is really a deal-killer.