DCS-932L Home Network Camera Does Not Show Up?
Feb 23, 2012
My new DCS-932L home network camera does not show up in MY DEVICES acct!! Only my FIRST camera show up, therefore I cannot access my SECOND camera remotely on my phone or other computer! When I ran the cd installation for the second camera, it could not access my network.....However I was able to install camera manually....it is working fine, I am getting my motion detection e-mails notification, I am able to access camera thru my laptop....What do i have to do in order to my second camera to show in MY DEVICES Acct? so I can access camera remotely?
View 3 Replies
ADVERTISEMENT
Jun 15, 2012
I have a DCS 3420 that is connected via CAT5 to may LAN and 2days ago something happened on the laptop, whenever I open the window in internet explorer on Win XP Pro; the camera just show a black screen.If I use any other computer on my LAN I get a clear picture of the Gate that the camera is focused on...I have checked the laptop drivers and updates but ca not see something wrong.
View 1 Replies
View Related
Aug 22, 2011
I have a computer in my garage that is connected to my Linksys router in the house via Cat 6 Cable. The computer in the garage has dual NIC cards installed and working fine. I am trying to get the Camera to feed back to the router from the second NIC card in the garage computer.The first NIC is communicating fine with the router.
Linksys Settings:
192.168.1.1
255.255.255.0
NIC 1:
192.168.1.145 (static)
255.255.255.0
192.168.1.1
[code]....
After messing around with many different thoughts and tries, I have successfully contacted 192.168.1.120 (the camera) from garage Computer While camera is connected to NIC 2.Camera wants a crossover cable to function properly and won't accept patch cable, I have tried with new cables...no change it needs crossover cable when connected straight to the NICs.
Camera:
192.168.1.120
255.255.255.0
192.168.1.1
Now the problem is I cannot view or access the Camera from my main Computer inside the house Like I need to....
View 2 Replies
View Related
Mar 3, 2011
I recently purchased a HP PHOTOSMART D110 wireless/eprint all in one. I have the dir-615 router and cannot get the printer to show up on my home network.Printer works fine hard wired to pc but wireless not at all. The ip address of the printer is 169.254.147.xx while everything on my network is 192.168.0.xx. Printer says connected for a few seconds then disconnected....I have tried to configure it on a vista and a win 7 machine.Everything else shows up fine on my network, as a matter of fact a friend brought his laptop over and it connected great..
View 14 Replies
View Related
Feb 15, 2013
If i run the software CD and activate the cam by "setup your cloud camera" it works and i can see the camera but i can only run it per local router command 192.168.... and there i only have the 320x240 solution. Important info: I only want to run the camera in my local network, i wont use the mydlink option,But if i install the D-ViewCam software the screen remains black and the program wont find my camera. I have already had a phone call with the d-link software
View 1 Replies
View Related
May 11, 2012
I asked a question recently about accessing camera via a smartphone but I realize that's not really the correct question. The smartphone works fine locally with wifi and has a browser available.
The real question I have is what is the easiest way to access any camera via a browser from a remote location. Years ago tech friend assisted me access my DCS-910 using dyndns.org. It was free and worked great. I guess it went away when they started charging for a basic account.
Is there an easy way to access a camera without using dyndns even if it involves putting in an IP address instead of a convenient domain name? I would just like to see at least one of my cameras in a browser off-site. If I have to pay $20/year for dyndns I can but I would prefer not to if possible.
View 2 Replies
View Related
Apr 17, 2012
How do i use dcs-932l with d-viewcam. I tryed to connect but d-viewcam does not recognize model.
View 1 Replies
View Related
Sep 2, 2012
I seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
View 1 Replies
View Related
Mar 26, 2011
I connected my camera to my router with a network cable. It is a DCS-2121, H/W Ver A2, with firmware 1.04_FR.It received an IP address and I could access it fine with a web browser.Then I configured it to work wireless.I disconnected the cable but the camera wasn't accessible.Since I couldn't find it I re-attached it with a network cable, but this didn't work.So I pressed the Reset button to start over again.However, now I cannot get it to work anymore. When I plug in the camera and have it connected with a network cable to the router the status light remains RED.When I plug it in without a network cable the status led remains RED.When I connect it with a network cable to a computer directly, the status led remains RED.I've tried changing the network settings of my router to use 192.168.0.x as range, but it makes no difference. In all cases the status indicator remains RED.
View 2 Replies
View Related
Mar 27, 2013
How to setup recording on dcs 932l?
View 1 Replies
View Related
Feb 24, 2013
I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
View 5 Replies
View Related
Apr 1, 2012
I have just purchased 3 DCS-932L'S and installed 3.11 D-ViewCam software. I have done my best to configure the mainconsole correctly so that my cam's will record on motion based occurances on a weekly schedule of 24 hours a day everyday. I have a lot of evidence that the system is recording as when I have the console open that there is motion detected and there are 3 folders in my nas unit that has tons of .dat files in them. My problem comes in when using the playback system. When I select the search by date/time button and locate the folder that is for a the camera I am interested in playing video for the results never show up!
View 1 Replies
View Related
Dec 20, 2012
I have a DCS-932L camera setup in my living room with motion detection activated in DView. During the day it works great, but after nightfall the camera shows random lines in the [poor] video. These lines are being picked up as motion and as such the camera records all night long taking up massive amounts of disk space. Even when I put the camera motion detection on 'lowest' value, it still picks it up.
View 10 Replies
View Related
Dec 21, 2012
I have 3 DCS-932L connected to DviewCAM 3.3 Device pack 1.4.2. When I open the DviewCAM main console I have picture. When I activate network service (live streaming) options under port: 8080 and webserver port: 801, it allows a visual of the DviewCAM GUI but no live streaming over the internet. [code]
View 5 Replies
View Related
Apr 16, 2011
When I view my DCS-932L camera in the Main Console of DViewCam, I can here the sounds in the room being viewed. But if I record the video and play it back, there is no audio on the playback. I have the microphone on the camera enableI now have sound recording, however, the audio is about 3 seconds behind the video. Is there a setting somewhere to keep them synchronized? I have checked all the video sync checkboxes I can find.
View 4 Replies
View Related
Apr 10, 2013
I have a new gateway X3500, I'm trying to connect my wireless ip cam (Dlink DCS 932L). I have tried to use wpa-wpa2-wep but nothing to do. I update the firmware
View 1 Replies
View Related
Nov 1, 2011
Here is the scenario: A mid-sized IP based camera network (150 cameras, 1 management server, several client workstations, and several recording servers) has been implemented on a stand-alone LAN utilizing a class C configuration and is set up as a windows domain. The user now wants to add the ability for workstations on the existing class B network to connect (with client software) to the management server on camera network, network is controlled by enterprise sized domain (Think county). Access is controlled by camera system client software credentials. Here are my questions:
1) What is the best way to do this and what hardware is required? I thought about just adding a NIC to the management server but am concerned about the 2 different domains playing well together. Would a router be best? What do I need to consider as far as setting up firewall and/or gateway?
2) What considerations do I need to take into account regarding the camera network not taking bogging down existing user network?
3) The workstations on the camera network are not as “locked down” as they are on the user network (again, think county network security). Will I be creating a security hazard and if so, how can I prevent this?
View 4 Replies
View Related
Apr 29, 2012
Here is what a wired portion of my network looks like:
internet---dsl modem---airport extreme---powerline ethernet adapter****powerline ethernet adapter---5 port switch---(ip camera & ioBridge 204)
The airport extreme is also hardwired to a PC that I use to view the IP camera.The issue I'm having is with the connection to the IP Camera.The connection to the camera worked for a long time, then starting dropping periodically and now it doesn't work at all.The ioBridge connected to the same switch as the camera connects to my network and the internet just fine.
Here's what I've done to troubleshoot: I plugged the camera in to my airport extreme and it worked fine. When I plug my camera into the other end of the powerline ethernet adapters, though, it doesn't work (even though the ioBridge does). I replaced the powerline adapters today (because they had worked before, so I guessed something had fried in them) but the connection still doesn't work.
When I ping the camera (when it's on the other side of powerline adapters and "not working") the response time is around 3ms (good) but there is about a 33% loss rate (bad).I'm guessing it's the loss rate that is keeping it from displaying the video stream on the computer...but I can't think of what changed between when it was working and when it stopped working that would cause it lose packets like that.
View 2 Replies
View Related
Mar 26, 2013
i have a n6073 network camera i cannot browse and ping the IP of it.i used CAM FINDER to find the right IP, netmask and gateway of my n6073 network camera. can you check this:
n6073 network camera:
IP: 192.168.0.20
netmask: 255.255.255.0
gateway: 192.168.0.254
and my local network connection:
ip: 192.168.0.20
netmask: 255.255.255.0
gateway: 192.168.0.254
why i can't browse in firefox nor ping it the ip of my n6073?
View 2 Replies
View Related
Dec 30, 2012
I have several network cameras within my home. Some are Panasonic. How can I view the image without using their cgi. I just want to view the camera image within my security program. How can I do this?
View 1 Replies
View Related
Jan 26, 2011
Why my network camera cant find the WIFI network when work well with the wired? The other WIFI devices such as notebook works well.
View 1 Replies
View Related
Sep 26, 2012
I work in IT and I'm trying to install a network camera for a client which requires power over Ethernet. How do I verify that there is not PoE available
View 8 Replies
View Related
Oct 20, 2011
Here's the layout: Cable modem in the basement. Several devices in which I'd prefer a wired connection in the basement. Upstairs on the 1st and 2nd floor of the house are many devices in which wifi is fine or preferred.Here's the problem: As you might guess, wifi is weak upstairs and certainly on the patio and 2nd floor. I have an access point upstairs that I've experimented with but it is flaky.
View 1 Replies
View Related
Nov 10, 2011
How to install a wireless network in home environment?
View 6 Replies
View Related
Jan 14, 2012
I am a new student in networking, taking the CCNA courses, and now want to rewire my home. I currently have a cable modem and E2500 setup running my network. I want to get the modem and router out of my computer room and in the basement where the cable enters the house. I want to do this to clean up the computer room wiring a bit and to run line drops to different rooms in the house where the internet will be utilized.Currently there are two PC's, a laptop, a tablet, sometimes a phone, and an XBOX using the internet. I want to get my printer back up and running on the network but thats another story. Only one PC is currently hardwired. I would like to run two cables into the room with the PC and XBOX that are currently using wireless, at least two into the computer room for the PC and network printer, and one or two into the living room for the blue ray player and possibly an internet tv.
View 1 Replies
View Related
Sep 10, 2011
I have a D-Link DGL-4500 router and my landlord recently ungraded our internet connection. However, now I get this error message when I try to hook it up to the ethernet hub,"The addressing of the Internet side learnt thru DHCP conflicts with the addressing selected for the LAN side. Internet communications will be disabled until you have changed the LAN side addressing to resolve the problem."
View 3 Replies
View Related
Aug 10, 2012
I have latest 3.3 dlink d-view cam software and a dcs-932l ip camera.I noticed the remote streaming and remote recorded viewing (ports 5150 and 5160) as part of the server software. I know if i browse to my ip of my pc it allows me to view both services on html via windows plugin visual basic addon. My question is what iOS app and Mac OS X app will allow me to remotely monitor my dviewcam softwares network service for both live view and recorded view.
View 1 Replies
View Related
Mar 31, 2011
Alright, first off a little background. Im recent IT graduate (last spring) but not yet working in the field in any official capacitance. Its been about a year and half since I had my last Cisco class. Right now Im in the beginning process to work with locally own retailer setup a network infrastructure for IP camera and in the future VoIP, about 45 50 total IP devices when the project is complete.Nothing has been purchased yet but I have some candidates and a network layout planned, thought this is the first time Ie setup network of this type in the real world.Right now I looking at Netgear and LG/Ericsson (previously SMC, Nortel) switchesHavent gotten to the router yet and VoIP will come later.For either brand there would be one 1000MB 24 port switch and three 100MB switches, all of them 24 port and all will have PoE on all ports.[CODE]
View 4 Replies
View Related
Feb 29, 2012
Have a problem connecting my new IPcamera Elro C903IP so I can access it through the internet. Did the camera setup according to the manual. Local access (wifi network) works fine but access through internet remains impossible. IP of the camera is still 10.0.0.110 but I found out that for access trough the internet the IP would be like 192.168. etc but I can't change it properly.I have cable internet and a wifi router Netgear WNDR3700v2.Documentation that I found about port forwarding etc is not clear enough to me. I tried over and over but can't get it to work .
View 2 Replies
View Related
Jan 4, 2012
I have a new apple airport extreme wireless router and have done all the port forwarding and gave the camera a static address and cannot view my camera outside my network. I also have done the dyndns service also. I will note if I change the http port in the camera settings to say 82 I get a black screen and cannot view my camera till I switch back to port 80. Reason why I want to do this is I need to view my camera for more then 60 seconds.
View 5 Replies
View Related
Mar 14, 2011
I have a Cam setup at my office, how can i know if some one watching me , the colors showing RED and GREEN. what does these colors stands for..
View 3 Replies
View Related
Apr 15, 2013
My Dlink DCS-930 camera won't work over 3G. It works fine on my home WiFi network. When on 3G it shows the camera, click it, tries to connect but just keep saying connection timeout.
It used to work over 3G fine, nothing has changed to my network. I've rebooted the camera and router numerous times, it has the latest firmware, but still won't work. I'm logged into my dlink account fine. I have an Apple Time Capsule.
View 2 Replies
View Related
Apr 19, 2012
I have a camera set up in my kitchen and it works and I can view it in our house, on other computers or my iphone. But I can't view it from my work or anywhere outside our wireless range.It is a DCS-920. I have opened port 80, and checked it with a port checker and it says its open. I have bell as a provider with a 2 wire 2701hg-g modem.I read on here about someone else not having a gateway address or primary DNS. I don't know what to put in there. My camera address is 192.168.2.20.
View 4 Replies
View Related
