D-Link D-ViewCam :: 3.2 Remote Live Viewer Not Showing All Cameras?

Oct 7, 2011

i have this problem when using Remote Live Viewer the Web Remote Client of DviewCam 3.2: i can only see one camera at a time, even more i have to stop playing the current one if i want to change the camera. the viewer shows me the grid for playing many cameras but i don't know if they can be played simultaneously. I can select any camera and will play so i don't think it's an access problem.

View 2 Replies


ADVERTISEMENT

D-Link D-ViewCam :: 3.3 / Setup 4 Cameras To View With Remote Live View?

Apr 12, 2013

I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80   ....   85. The screen has only the option for 1  video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras  at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?

View 5 Replies View Related

D-Link D-ViewCam :: DCS930l - Remote Viewer Can See One Camera But Not The Others?

Feb 22, 2013

I have a setting where we are using some DCS930l cameras connected to a 2003 server. We are using the remote viewer and can see one camera but not the others. We have 5 cameras. We try to drag and drop the other cameras, but nothing shows up. Only the 1.

View 1 Replies View Related

D-Link D-ViewCam :: DCS-930 / 932 - Add IP Cameras To Mydlink App On Android

Jan 16, 2013

i have multiple DCS-930 and DCS-932 at my home. I also have other IP cameras. Is there a way to add  IP cameras to the mydlink app on Android, iPad, and web?

View 1 Replies View Related

D-Link D-ViewCam :: DCS3411 Which DNR / NVR Will Be Able To Support All Cameras And How

Jun 20, 2012

I am doing a project with 6 DCS3411, 4DCS 7110 and 1DCS 7410. My question is which DNR /NVR will be able to support all the cameras and how. because most of the say they can support up to nine.

View 1 Replies View Related

D-Link D-ViewCam :: Unable To Connect Two 930L Cameras?

Jul 22, 2011

I have installed two 930L cameras which work fine via mydlink. When I attempt to connect them to D-View Cam 3.11 they fail to connect or will not stay connected.I first tried connecting to the router with both cameras in the same room as the router. One will connect and stay connected but the other will connect and freeze or not connect at all. If I move th GOOD camera out of the room, it will not connect.Do I have a router issue? I am using Verizon FIOS with their supplied router (Actiontec, I think). My wireless laptop connects but signal strength is never 5 bars.

View 2 Replies View Related

D-Link D-ViewCam :: 3.2 Doesn't Work With More Than Two Cameras Monitored (942-L / 5222-L)

Jul 10, 2012

I have (2) 942-L, and (1) 5222-L on one network.  port forwarding set on router; (942) 192.168.1.3:1024, (942) 192.168.1.4:1025, and (5222) 192.168.1.8:80.  no matter if all 3 are connected to dViewCam, only two will work at a time.  Disconnect any third, and they work fine.  reconnect 3rd, and one disconnects intermittently.  On a side note, if I run a different program on another computer (iMac); i.e. IP Camera Viewer, they all work fine.  I know, I know, but I like DViewCam, because it's the only thing running the PC computer. 

View 3 Replies View Related

D-Link D-ViewCam :: DCS-930L Cameras Missing Or Corrupted Files

Nov 17, 2010

I just purchased two DCS-930L cameras.  They are both installed and running fine over wireless.  I can view them via a web browser, however, I cannot get D-ViewCam to work.  I installed the latest version (3.1.1).  As soon as I launch the Main Console it crashes and I get the "Missing or Corrupted Files error code 268435457".  I saw the other post in terms of change the display settings on my PC to 1280X768, however, that does not work.  I also have User Account Control (UAC) turned off. 

View 7 Replies View Related

D-Link D-ViewCam :: Older Cameras Like DCS 2100 / 3220 Not Fully Supported

Feb 17, 2010

Downloaded DVIEWCam 3.0. Are there any plans on supporting older Dlink Cameras like the DCS-2100 etc ...?  Even my DCS-3220 is not fully supported, however the 3420 worked in the config menu.

View 3 Replies View Related

D-Link D-ViewCam :: DCS-932L - Live Streaming Over Internet

Dec 21, 2012

I have 3 DCS-932L connected to DviewCAM 3.3 Device pack 1.4.2.  When I open the DviewCAM main console I have picture.  When I activate network service (live streaming) options under port: 8080 and webserver port: 801, it allows a visual of the DviewCAM GUI but no live streaming over the internet.  [code]

View 5 Replies View Related

D-Link D-ViewCam :: View DCS-2121 From Remote PC Without Using WEB?

Oct 22, 2011

My Brother-in-law, who lives in Singapore, uses his DCS-2121s (2x) for monitoring his newborn and it works great!

Me and my wife, who lives here in the US, always views those IPcams through my web browser from my PC (firefox 7.1).

I was just wondering if there is a different way to watch those cameras using my computer.  I was looking for a dedicated D-link APP or Program so I don't have to use the browser anymore. 

BTW, my brother uses dyndns with his DCS-2121.

View 3 Replies View Related

D-Link DCS-942L :: Live Video Showing Black Screen

Feb 22, 2012

I have just installed two DCS-942L cameras and uses MyDlink. The live video is OK from MyDlink, but when I log on to the cameras from "Advanced Settings" the live video is just a black screen, no matter what video profile I select. Like wise I can't select motion detect area, because there is just a black screen.I have tried on tree different computers. What can be wrong?

View 7 Replies View Related

D-Link D-ViewCam :: DCS-932l Remote Streaming / Recorded Viewing As Part Of Server Software

Aug 10, 2012

I have latest 3.3 dlink d-view cam software and a dcs-932l ip camera.I noticed the remote streaming and remote recorded viewing (ports 5150 and 5160) as part of the server software. I know if i browse to my ip of my pc it allows me to view both services on html via windows plugin visual basic addon. My question is what iOS app and Mac OS X app will allow me to remotely monitor my dviewcam softwares network service for both live view and recorded view.

View 1 Replies View Related

D-Link DIR-825 :: Mybook Live Remote Access

Aug 24, 2011

I recently purchased a 825 and a WD Mybook Live. I have been going back and forth on the WD board trying to resolve a remote access issue with the mybook and I am being told to do some settings in the router and I am not sure I have dine them correctly> It has not resolved the issue but I would like to make sure I am correct before I claim its not a good fix. The mybook is connected into a network port on the router which is connected to a High Speed modem and then out to the internet. Initially I was told to enable UPnP on the 825, which was already enabled. Then this is what I was told to do by a WD tech. You could try assigning a static IP to the My Book Live, then making sure ports 80 and 443 are assigned to that IP on your router. It is possible that something else is taking one of these ports. We use uPnP to try to open up these ports, and if it fails, we resort to relay mode. In the future, we will allow you to set these ports within the My Book Live to other than 80 and 443.

View 7 Replies View Related

Cisco Firewall :: ASA 5520 - Real-time Log Viewer Filter Not Showing Rule Hits With ACL

Dec 20, 2011

I'm running into this issue on an ASA 5520 running version 8.2(2)9 and ASDM version 6.2(1).
 
I have an ACL denying traffic to a certain IP range and the logging level set to Debugging.  The hit count is rising quite rapidly but when selecting "Show Log" the Real-Time Log Viewer opens with a value of 0x13d0ee2a in the "Filter By" field and no  logs are ever shown.
 
Logging is enabled globally and Logging Filters on ASDM is set to Debugging as well.
 
how I can get the RTLV working?

View 7 Replies View Related

Protocols / Routing :: Lorex Edge Cameras Not Showing Colors?

Dec 11, 2011

I have a Lorex Edge 4 channel surveillance DVR system.One camera shows color, the other 3 show color, but every once in a while one of the others shows color.Have rebooted DVR.

View 1 Replies View Related

How To Sort Xbox Live When Receiver Is Showing Red Light

Mar 3, 2011

I have bought 2 white single ariel recievers for wireless xbox live and red light stays on both so cant be them so what am i doing wrong , i have had it working on a cable but not wireless

View 1 Replies View Related

D-Link D-ViewCam :: How To Use DCS-932l With It

Apr 17, 2012

How do i use dcs-932l with d-viewcam. I tryed to connect but d-viewcam does not recognize model.

View 1 Replies View Related

D-Link D-ViewCam :: Possible Enhancements / Improvements On New DCS-900 V3.0

Jan 27, 2010

I would like to start a new thread on possible enhancements/improvements on the new D-ViewCam v3.0.Allow Events (General Motion detection) to be visible in Playback timeline/period selection, similar to the way of Backup (and Remote Playback) timeline/period selection. Fixed in 3.01.Allow 30-second steps increments forward/ backward in playback. Current minimum is 1 minute.Allow jump to event during playback, from either log-viewer or inside playback (via extra button), similar to version 2.0xMention 64-bit compatibility in User- documentation/ datasheet (it is not there yet)Allow/implement multi-channel simulcast [remote] Playback (it is pre-wired) Allow/ implement multi-channel remote viewerBug: Fix Signal Lost event visibility in time/period selection (it does not show these events)Bug: Fix 64-bit hi-res (>1280x1024) "Resource" error. Fixed in 3.11.Bug: Fix Playback.exe crash when saving image/snapshot, while supplying wrong extension (reproducible by: Save as jpg, then supply name.asf, and it will die)Road_runner: Option to move app-window/screen to other monitor and/or resizeToppy: Support older model cameras (DCS-900/950)Toppy: Support multi-screen display (multiple windows)disaster: Option for a playback list similar to V2.03, select motion separately, instead of single stream.disaster: Allow for GUI to select cross-mignight period (can be done manually by setting start-date and -time)disaster: Elaborate more on Smart Guard in Docsdisaster: Allow for higher free space percentage threshold for overwriting old recordings disaster: Allow to program autopatrol to start and end on a scheduled timeBug: Use of < character in password causes deletion of ALL defined remote serversZippyDan: Remote Live Playback: playing video from more than one camera at the same remote site at the same time.

View 9 Replies View Related

D-Link D-ViewCam :: How To Setup Recording On DCS-932L

Mar 27, 2013

How to setup recording on dcs 932l?

View 1 Replies View Related

D-Link D-ViewCam :: Is It Possible To Use VLC To View Video From A DCS-930L?

May 3, 2011

Given that D-View Cam stinks (will only run full-screen), is there a way to view the DCS-930L using VLC?

View 14 Replies View Related

D-Link D-ViewCam :: DCS-2210 Using A Custom IP-camera View Possible?

Oct 31, 2012

Is it possible to configure a 3rd party product with D-Link D-Cam View program? We want to combine three D-Link IP cameras DCS-2210 with a epiphan VGADVI Broadcaster (url...). The epiphan product can provide a http mjpeg video stream that can be displayed with a normal Webbrowser, VLC or other programs like that.I can connect to the broadcaster with this URL...

View 1 Replies View Related

D-Link D-ViewCam :: DCS-932L - Cannot Playback Any Videos Recorded

Apr 1, 2012

I have just purchased 3 DCS-932L'S and installed 3.11 D-ViewCam software.  I have done my best to configure the mainconsole correctly so that my cam's will record on motion based occurances on a weekly schedule of 24 hours a day everyday.  I have a lot of evidence that the system is recording as when I have the console open that there is motion detected and there are 3 folders in my nas unit that has tons of .dat files in them.  My problem comes in when using the playback system.  When I select the search by date/time button and locate the folder that is for a the camera I am interested in playing video for the results never show up! 

View 1 Replies View Related

D-Link D-ViewCam :: Recording Motion All Night With DCS-932l?

Dec 20, 2012

I have a DCS-932L camera setup in my living room with motion detection activated in DView. During the day it works great, but after nightfall the camera shows random lines in the [poor] video. These lines are being picked up as motion and as such the camera records all night long taking up massive amounts of disk space. Even when I put the camera motion detection on 'lowest' value, it still picks it up.

View 10 Replies View Related

D-Link D-ViewCam :: DCS 5300G Camera / Auto-detect Won't Work?

Mar 14, 2011

I having issues with DView 3.11 on a WinXP Professional with SP3.There are 4 DCS 5300G cameras wired to the router.I can see the cameras using IE, but when I try to configure the DView in the camera section with the autodetect button it will show an error that the camera cannot be identified.I had checked the IP address, port, user & pass everything is ok. I even hard reseted one of the cameras and it won't work.

View 1 Replies View Related

D-Link D-ViewCam :: DCS-932L Does Not Record Audio In Sync With Video?

Apr 16, 2011

When I view my DCS-932L camera in the Main Console of DViewCam, I can here the sounds in the room being viewed. But if I record the video and play it back, there is no audio on the playback. I have the microphone on the camera enableI now have sound recording, however, the audio is about 3 seconds behind the video. Is there a setting somewhere to keep them synchronized?  I have checked all the video sync checkboxes I can find.

View 4 Replies View Related

D-Link D-ViewCam :: Unable To Find Camera (942l) On Network

Apr 3, 2012

Just got this & set it up today. Wanted to buy a couple more in the next few days; but wanted to test out the D-Viewcam service. The application (D-Viewcam) is not able to find my camera.I have 'ticked' the uPNP & the forward; tried to disable it as well. No luck.

Camera 942l is on ver 1.1
D-Viewcam = v 3.2
Both reside on the same LAN

I'm able to view the camera on the browser. And on my phone.

View 1 Replies View Related

D-Link D-ViewCam :: DCS-2132L No Longer Accessible - Port 80 Not Working

Mar 17, 2013

Taking another look at Dview cam today after not touching it for 3 months after initial install.The dcs-2132L can't connect.I can to the 2132L  directly... I changed the port as a test..  Port 80 wasn't working originally.

[url]....

View 9 Replies View Related

D-Link D-ViewCam :: IPhone App Keeps Video Stream Going Even After Phone Locks?

Feb 26, 2012

This causes massive 3G data to be used.  If you don't close the app first it just keeps streaming and eating data + battery.This data screen cap is for 10 minutes after locking the phone with the app open.When the phone locks, the app should kill the video streaming.

View 5 Replies View Related

D-Link D-ViewCam :: DCS-5300 And DCS-6620 No Longer Connected With Software

Dec 24, 2009

I originally began using my D-Link cameras, two DCS-5300s and a single DCS-6620, with the IP Surveillance software. I see that the software is no longer recommended and may no longer be available. Any explanation for the move to the DView Cam software ? If I were to convert over to DView Cam from IP Surveillance will I lose any functionality or features. Will there be any functionality or features gained ?

View 6 Replies View Related

D-Link D-ViewCam :: DCS-930L - Unable To View Video On Android Devices

Aug 7, 2011

Setup my DCS-930L for DDNS (Dynamic Domain Name Server) so I can access the DCS-930L via the Internet (couldn't access the camera half the the time while on vacation using mydlink) and can now access the camera using my laptop, Android Thrive, and Motorola Droid 3 via the URL I've created but can only see the video when using the laptop.

I have the DCS-930L set to Java but when I log into the camera with the Thrive or Droid 3 (both Android devices) I don't get video. I can make changes to the camera settings and everything else you can do when logged into the camera but just can't see the video. If I change the 'View Mode' in the video setup to 'Image', I will get a picture on all three devices (Thrive, Droid 3, and laptop).

What do I need on the Droid 3 & Thrive so I can see the video when I log into the DCS-930L with an Android device?

View 7 Replies View Related

D-Link D-ViewCam :: DCS-2121 - License Is Invalid (Error Code 2268435460)

Jan 12, 2011

 "The license is invalid." (Error code:2268435460) it happens with all versions tested on several PCs (Win2003 Server, WinXP). Already tried to reboot, edit the registry, etc but no luck. Using 3 dcs 2121?

View 7 Replies View Related

D-Link D-ViewCam :: DCS-1130 - Record Video Upon Motion Detection With Software?

Aug 2, 2012

I'm puzzled that you don't seem to be able to do this (a basic feature).  Seems like when motion is detected you can only send an email or do the DI/DO thing.

I can do this quite well via the direct web-based interface (1.03 and earlier at least) on the DCS-1130, but the 932L doesn't have video record on motion option (baffled as to why not there too, but that's another issue).  So, I was thinking of using the DCS software to get motion-detected recording out of the 932L, but looks like I can't do that either?   

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved