I am just wondering how to set up a home network with an old computer used as a server... we will have a wii, ps3, lap top, and 2 desktops connected to the network as well as two dell printers. The laptop runs windows XP and the desktops run windows vista. The old computer will will use as a server is windows xp or windows 98 (most likely wont use that computer). What will i have to do to set this up and run the server as well as the network.
I have an exhibition next saturday on network monitoring and I was given ftp server monitoring project. I'm only allowed to used linux based OS for this project. Right now I have 3 notebook. 1 as a client, 1 as a router and another 1 is for monitoring. Right now, I only can make a connection between the client and monitor notebook by using Freebsd in the router. How to setup a ftp server and how to monitor it?
I am very newbie to networking. Although I am a newbie I managed to install Windows Server 2003 by following instructions got from Google but have not played around completely. I have 2 PCs with XP, 1 unmanaged switch. If I connect the 3 PCs (2 Xp clients + 1 server) using one unmanaged switch,
1. how do I setup the server to be able to give permanent IP to each PC (clients)?
2 how do I make the 2 PC be able to access the server?
I want to setup my home network to run a DLNA server for videos, music, etc. I know that there are many new routers and NAS devices out there that now have the capability to run a DLNA server built-in. My question is, which would provide a better DLNA server: one that is built into the router or one that is built into the NAS device?
I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address - The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address - The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
I am a networking student so have access to a free copy of Windows Server 2012. I want to setup and get experience with AD, DHCP, and DNS, among other services. Right now I have a Netgear router attached to a Cisco switch. (studying for CCENT cert) I have my desktop and server plugged into switch. I want my desktop to connect to the domain for testing and messing aroudn with. My wife has a netboook, smartphone, and wireless ipod. I'd like her 3 devices to get an IP from the DHCP server without having her authenticate to the server. Will the Netgear router allow this since wirless access is on? Or will she need to authenticate with the server to get a DHCP IP? I am gonig to disable the router's DHCP service.
I would like to set up a home server, that will sit under the stairs so that it can link to out BT home hub (v3). The idea is then to connect the printer to it, so that we can have both a wireless printer and a central file store for pictures/vids etc.Is XP ok for this? if so, what settings do I need to change/add?Is there any software that I need to make it work?How do I make sure that it is secure for external hacking? As it will contain our personal docs/photos etc and I would hate to use them.
I have setup a webserver on my home PC and I have forwarded port 80 on my router to the IP adress of the PC that is running the web server. The web server is working great; I can get to my web pages from outside of my home by going to http://MyIpAddress/Anyway, the problem is with the Windows Media Player plugin I'm using. I want to embed 6GB MPEG-2 videos into my web pages. I have some videos on my PC and I want to be able to watch them remotely by connecting into my web page. It works fine when I'm at home; other PCs can connect and play the videos no problem. The problem is when I'm at work. When I'm at work, I go to my web page (via my IP address in a web browser) and the Media Player plugin says "Connecting" for a minute, then it says Ready, but the video will not play. I tried using a smaller, AVI file (680 MB) instead to see if the problem was streaming such a large file, but the video still would not play.Do I need to foward more ports on my router so that Windows Media Player can connect back and get the information it needs?
I have a network that is currently set up in the following way:Modem -> vonage Motorola router -> wireless router Most computers are hard wired to the Motorola router. Some other ones connect via the linkseys wireless router. All computers are able to connect to the Internet. The problem I have is that I will be setting up a home computer as a file server connected to the Motorola router. The network acts as though it is two meaning that computers on one router can't see computers on the other router. What steps should I take in order to make all computers accessible through both routers.When I type 192.168.1.1 from a computer on the Motorola router, I get nothing, when I type in my actual ip address, I get the Motorola router. When I type in 192.168.1.1 from a linkseys connected computer, I get access to the linkseys router.
I am looking at buying the EA6500 router. However, before I make the investment into buying this router, I need to know some basic information first.
1. I want to setup the EA6500 to accept FTP requests to my Windows Home Server. Yes or No? 2. Remote access to the EA6500, Yes or No? i am aware of the security risks 3. I need to setup Port forwarding on the EA6500. I assume I can? 4. Manage a Kindle Fire and other wireless devices?
I have a home network running all Mac computers (though can run Windows VM if necessary) and a pair of USB printers. The wireless router and cable modem are in one room, but the printers are in another. I'd like to find the most practical way to add the printers to the local wireless network without sharing them from a computer. I've tried that for a while, but don't want to leave a laptop connected 24/7 just to enable wireless printing (rather defeats the purpose of a portable computer). I don't have any wired network lines in the home, and am not excited by the idea of running any cables.
I want to setup a DC++ HUB for sharing data within the university local network. We have addresses of the form 172.31.*.*. These addressed are accessible within the university bu non routable outside on the internet. My plan is to setup a local HUB for DC++ for sharing data within the university intranet. So even if internet is unavailable data can be exchanged through LAN. This HUB must not be accessable outsied the university network.how should I do this all..implementing network sharing other than DC++. My basic idea is that everybody can share their data and the data is searchable from one common interface( Web interface is better option, if possible). And data featching should prefferably be from many hosts, using multiple connections so that speed can be improved..
i'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?
I have a question about my windows systems(XP and Vista) re-connecting to my network folders when my computers restart. I have some shared network folders on my Synology DS410. And then i mapped a network drive to use those folders.But every time i restart my computer i get the message "cannot reconncet all network drives"I have to put in my username and password everytime. I choose Remember login and password.How can i fix this so it automatically connects to these on restart?
FYI... 1 computer - Windows Vista Home Premium 1 computer - Windows XP Home Both connected via wired LAN
My iSCSI drives connect just fine on restart. Just not my mapped network folders.
I have a server webpage hosted on a local linux machine. I can access it by typing the I.P. into my address bar from another computer on the same network.way to connect to my computer on my home network from a computer not on my network.
I finally was able to connect two of my computers up to share files. The only problem is My Win7 computer can't see the xp computer although the Xp can see the Seven. When I first set it up Explorer showed the name of the Xp but when I clicked on it the dialog said it couldn't find the computer. The Xp name was in all caps and when I checked on the Xp the name was all lower case so I tried to change the name. When I tried, the OK button was grayed out so I went in to So I clicked on More and was able (I thought) to change the name there. I had to reboot and when I did the computer had just appended the DNS entry I had to give to the original lowercase name.
I was finally able to rename the XP computer! I changed the name to NETBOOK all caps like I had originally thought it was. BUT it makes no difference to the Win7 machine it still can't see the XP machine. I did a refresh and the Xp's name NETBOOK showed up But I am still back where I started from because when I click on it a dialog box just says that it can't access ||NETBOOK.
my set up is simple...main computer cable connected to BT hub (broadband) - second computer, in another room, wirelessly connected through same hub. Recently, I decided to link the two computers with XP using the network wizard. Followed instructions, and everything worked fine until the other day, when the main computer couldn't 'see' second computer (but second computer could see main.) I've checked file sharing and firewall exceptions and all is well. Basically, I am using second computer as extra storage, and so I really would like to make connection again from main computer, not the other way round. Just cannot understand why main can't see second anymore?
I have a router supplied by my ISP, Verizon[a g-router] using with 2 desktop and 2 laptop computers. All but 1 laptop are still running XP.So far I have not tried to print over the network. The printer is connected to the desktop that is also wired to the router.how to setup printing across this wireless network. Must I setup another internal home network in order to do wireless printing?
I have a SMC Rogers router and need to extend the range due to dead spots in house. I have purchased a D-Link N300 dir-615 router . can i just hook it to the eathernet lines I have on the second floor to extend range of the wireless network? How do I set it up IP address for best results? concerned that 2 IP addresses would not work at same time??
I'm trying to set up my home network with two routers. One as the LAN router and the other as the access point. I have a really nice router and an older router, I'll just leave it at that. One router will be connected to the modem, the other in my game room for the wireless access point. I want to use the nicer, newer router as the LAN router or the wireless access point?
I am trying to set up a wireless network within my home, i have a external hard drive and was wondering can i connect this to my internet router to make it accessible in order to stream music and movies from the hard drive. there is no ethernet port on the hard drive but seen a usb to ethernet adapter is this all that would be needed?
I want to set laptop 1 at home music receiver location. laptop 1 will be used to play music and play music from web over home stereo. I want to be able to access laptop 1 from other devices, iphone 5, other laptops and have the ability to remotely change the music.Laptop 1 can be connected via network cable or wireless to wireless home modem.
so I have this problem, the internet only work on one computer, whenever I connect to another computer it says something like: " Can't connect to IP 2, 3, 4 etc. I've tried resetting the modem, router and everything, it didn't work... Sooo, if I connect the same internet cable that's working on the computer to another one it doesen't work. What sholuld I do??, maybe change some settings in the router?
The computer I am using won't connect any of the routers I've tried (one innoband and two sonicwall tz100's, all of which work with other computers), even though it does connect to the internet through the ethernet port. It is a Dell optiplex 980
i am unable to connect to some lan computers in my office. when i go to start ---> Run ---> \192.168.0.24 or else...(lan computer ip) after 10/15 seconds a popup window comes and says (network path not found). but some systems i can easily access through this procedure
I love sharing on my home network to transfer files from one computer to the next. However, I will soon have tenants in my house sharing my network ...so they can use my Wi-Fi to get on the internet.I need a solution to give them access to the internet without losing my own network sharing ability.I do not want them accessing my files.I have Windows XP home and a Dlink WBR-2310 router.As I see it, I need to either upgrade to a router with a Guest Zone/Access feature ...OR..upgrade to Windows 7(?) to give myself more networking options (i.e. file sharing where I select the users or set a password). Currently the XP permissions are too general.
I recently got my laptop fixed after it being out of commission for about a year (it turns out there was just too much dust collecting in it) and when I got home and tried to connect to my wifi network, I didn't have internet access. I received a message that said I had sucessfully connected to my network but it was only a local connection - no internet. It also shows up as "Unidentified Network." This is peculiar to me because my boyfriend's laptop is able to connect to the internet wirelessly just fine, and I am currently using the wifi on my iPhone. I ran the ipconfig and several ping tests in cmd and used a wifi inspector.
I've got a 200mbps down/100mbps up fiber connection at home. When I do a speedtest I get around 192mbps down which is more then enough. However my problem lies around my upload speed, but only on ONE computer.
I have a desktop and 2 laptops connected to a wireless router on my home network. I used to be able to get internet access on all 3 computers, but suddenly one day I can't get on the internet on my desktop. The 2 laptops have no problem getting on. I am at a total loss as to what to do. I am really good with computers, but networking is all new to me
