How To Setup Lan Network In 3 Computer
Jan 10, 2012how to setup lan network in 3 computer
View 1 Replieshow to setup lan network in 3 computer
View 1 RepliesWe have a home network setup. My HP Pavilion AMD Athlon 64 laptop running Vista, shares the printer with an older desktop, AMD Athlon 1600 XP. The printer is hooked up to the older computer that I am getting rid of. I assume I will have to install the software for the printer onto my laptop so I can use it. Is there anything else I should do? Other than removing all the files etc off the old computer.
View 3 Replies View RelatedI am just wondering how to set up a home network with an old computer used as a server... we will have a wii, ps3, lap top, and 2 desktops connected to the network as well as two dell printers. The laptop runs windows XP and the desktops run windows vista. The old computer will will use as a server is windows xp or windows 98 (most likely wont use that computer). What will i have to do to set this up and run the server as well as the network.
View 9 Replies View RelatedI am looking up setting a VPN using ASA 5505s so we can connect a mobile network of computers to our base network of computers. The base network has a static public IP address, but the mobile site will not. I was thinking of using a remote access VPN setup, but I am unsure if I can have a network of computers connecting in to the remote access VPN setup.
View 5 Replies View RelatedI would like to know how to setup my e-mail on my computer.
View 1 Replies View Related I am trying to connect computers through internet connection.When I type the address on a browser (google chrome or mozilla) it says that the address is unreachable.[URL]"An attempted connection to 112.201.9.206:80 was refused. This typically indicates that there are no services available on that port, but that it is NOT being blocked by a firewall or your ISP."
Heres what I have done so far.
* Registered at DynDNS
* set-up/log-in DDNS on my router (D-Link WBR-2310). enter DDNS address, enter username and password.
* Set-up port forwarding (port 80(http) and port 443 (https)) on router
* open both port (80 and 443) on my computer and exmy windows firewall
The computer that i am using which is on the LAN Setup. Also it is connected to the domain. Whenever i tried to log on to the computer it is giving me an error message that "The System could not log on the "Domain Name" either the connection is disconnected or the domain is no longer available" somting like that. When i remove the LAN Cable and if i enter the domain password, i can login to the computer. after i log on the computer if i connect the LAN Cable it is working fine. I can access the other computer which is connected to the same domain. Why the error message is poping up?
View 4 Replies View Relatedhow can i share my Internet connection using 2 LAN card without router to my another pc
View 1 Replies View Relatedhow to connect a new computer wifi using an existing router ? Have attempted many times but without success.
View 4 Replies View Relatedhow to connect a new computer wifi using an existing router ?Have attempted many times but without success.
View 1 Replies View RelatedI have a Dell Inspiron, Win7 Home Premiun, 64 bit, N4110 Laptop and a Dell Optiplex GX520 with Win7 Professional, 32 bit desktop and I'd like to be able to share files. The laptop can see the desktp on my network but can't access any of the files. My desktop can't see the laptop at all. BTW, I do have MS Security Essentials running on the laptop and the Windows Firewall is on - the desktop is set up the same way.
When I try to set up a HomeGroup I get an error message that says "Can't set up a HomeGroup on this computer".
how to sending out the wireless network from computer A to computer B if we used a lan network to computer A
View 12 Replies View RelatedHow do you setup wireless router for Lenovo Laptop computer
View 1 Replies View RelatedI want to setup a static ip address for a h.264 network dvr ,however my desktop computer is out of order, that is connected direct to router,is it possible to use my wireless laptop to setup the router,or will I have to connect the eithernet cable to the laptop.
View 4 Replies View Relatedi recently had to wipe hardrive of my laptop and am having trouble getting hooked back up to my linksys E/1000 , who can i contact about getting password and network name
View 2 Replies View RelatedI got a problem with my setup main computer, It work wery god wireless, with very fine speed about 82 mbit in and 24 mbit out. The problem is that it almost don't work at all with cable, even if i turn off the wireless network, the speed is about 2-3 mbit in and about 6-7 mbit out All other computers, tv. printer wireless work very fine.
View 2 Replies View RelatedI have an HP SR2170NX desktop set up via DSL and cable to an ATT gateway router that enables wireless for my roaming with my laptop. The laptop works wirelessly even when the cable between the router and desktop is unplugged and the desktop turned off. I would like to equip the desktop with a Cisco-Linksys WMP54G Wireless-G PCI Adapter or similar PCI-card to allow for elimination of the cable between the router and the computer.
View 2 Replies View RelatedI have a home network running all Mac computers (though can run Windows VM if necessary) and a pair of USB printers. The wireless router and cable modem are in one room, but the printers are in another. I'd like to find the most practical way to add the printers to the local wireless network without sharing them from a computer. I've tried that for a while, but don't want to leave a laptop connected 24/7 just to enable wireless printing (rather defeats the purpose of a portable computer). I don't have any wired network lines in the home, and am not excited by the idea of running any cables.
View 5 Replies View RelatedI want to setup a DC++ HUB for sharing data within the university local network. We have addresses of the form 172.31.*.*. These addressed are accessible within the university bu non routable outside on the internet. My plan is to setup a local HUB for DC++ for sharing data within the university intranet. So even if internet is unavailable data can be exchanged through LAN. This HUB must not be accessable outsied the university network.how should I do this all..implementing network sharing other than DC++. My basic idea is that everybody can share their data and the data is searchable from one common interface( Web interface is better option, if possible). And data featching should prefferably be from many hosts, using multiple connections so that speed can be improved..
View 4 Replies View RelatedI have a question about my windows systems(XP and Vista) re-connecting to my network folders when my computers restart. I have some shared network folders on my Synology DS410. And then i mapped a network drive to use those folders.But every time i restart my computer i get the message "cannot reconncet all network drives"I have to put in my username and password everytime. I choose Remember login and password.How can i fix this so it automatically connects to these on restart?
FYI...
1 computer - Windows Vista Home Premium
1 computer - Windows XP Home
Both connected via wired LAN
My iSCSI drives connect just fine on restart. Just not my mapped network folders.
My computer is a 32 bit, Win7 SP1 with Pentium Dual Core 2.6 Ghz and 2Gb of Ram on a wired network. My wife has a similar system using a wireless network. She can ping my IP Address, but I cannot ping hers. We both have full access to the Internet. We are using the same workgroup, and both computers have file and printer sharing enabled and IPv6 addresses and DNS server addresses selected automatically.The problem appears to be with my computer?
Here are my system stats:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 2013 Mb
Graphics Card: Intel(R) G41 Express Chipset, 782 Mb
Hard Drives: C: Total - 76308 MB, Free - 49226 MB; D: Total - 286167 MB, Free - 52893 MB; M: Total - 38154 MB, Free - 7 MB;
Motherboard: ASUSTeK Computer INC., P5G41-M LE
Antivirus: Microsoft Security Essentials, Updated and Enabled
i'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?
View 6 Replies View RelatedI'm currently on my home network, which used to consist of a router with wifi and all had a stable connection. However after leaving for university, i have come back to find that they are using these : (it now says i am connected via LAN) - i am running via a ''powerline network'' apparantly.
[url]...
However I believe my dad's internet is hardwired to the router, which is where the problem lies. When his pc is off, the internet is fine, however when he turns it on the internet becomes VERY intermittant for everyone except for him. When downloading a file it cuts down to 40-50kbps (not much slower than it usually is), but drops out every half a second... This makes web browsing impossible, let alone anything else.
I am having problems setting up a network, recently bought a used linksys router and had to restore to default settings. Now I am trying to set it up but I cant go to the ip 192.168... it times out, but when I go online and do the same thing I get a FW-1 at checky: Access denied. error. This is obviously my first time setting up a network using a router. what am I doing wrong? I checked drivers and I have tried plugging the cat5 into both internet and the 1st and 3rd port with little success, either a timed out connection or an error.
View 9 Replies View RelatedWhen I plug in my Belkin my Netbios over TCP/IP is enabled, however is disabled when the router is connected. I cannot gain access to internet through Belkin G router, but can through my ISP router. I've tried IP/Config/all, (Nothing). The problem started when I changed something in Firefox (About:Config) attempting to change URL Search engine from Yahoo to Google, and that's when the problems started.Now my (Desktop) Computer doesn't recognize network, and I can no longer gain access to Net w/Belkin G wireless router...however, router will allow temporary access to internet when plugged up anyway (2 Android phones, 2 laptops), but the desktop will not connect.
View 11 Replies View RelatedI have a desktop computer that as of last night worked with the internest. This morning it did not. I have a home network. I also have laptops connected to a wireless router and they have no problem getting into the internet. Not sure waht to do. I am running Windows Vista Home Premium.
View 6 Replies View Relatednew HP 2000 computer he just purchased. I brought it to my house to set it up. No problems connecting to wifi at my home. Downloaded all the updates and got it ready for his house. When I tried connecting to his network, it kept giving me the network key. I know I was entering the correct information because we had his older computer and I copied the exact thing. I had also made a folder when I set up his other computer with his information for his network in it and I was going by that. I tried to automatically connect and I also tried to manually connect. I deleted the name of my network (that worked) and rebooted. It continually gives me the block to put the password in. I brought it back to my house and the wifi connected with no problems. His old toshiba had no problems connecting to his network. I disconnected it and reconnected it. Is there something about the settings I am not doing? Or is it a firewall setting? Is there something in the modem that is conflicting with the new HP. It's a WAP2 Personal with AES Encryption (did not work on that one), where as my network is a WPA Personal with TKIP Encryption (worked on this one). Will that make a difference and if so what do I do about it?
View 4 Replies View RelatedI am on network with administrative rights and one computer on network is not visible in ipscanner, cannot connect with remote desktop connection. Cant even connect by typing in run command (eg. \192.168.1.10c$) The computer is ON and users have logged on it many times. This same problem happens on many other computers too, and its not permanent. After few days or so, he problem is gone, and sometimes persists after a weekend, when pc is shutdown on Friday. Operating system is windows xp sp2 and there is no third party firewall on remote computers.
View 1 Replies View RelatedI would like to know if any of you know how to do a documentation of a network (Computer Network) in the topics of Remote Application, Users, and Group Policy.I have been trying to look for examples of documentations of those topics, but nothing.
View 1 Replies View RelatedI recently got a new computer from work, and it won't connect to my home network. I restored it to factory condition, and reinstalled the drivers for the wireless adapter card, but it won't identify my home network. The network adapter is a D-Link WDA 1320 and I'm trying to connect it to my home network which is AT&T Uverse, and the router is a 2wire 3800hgv-b. Hopefully that is enough information for at least an educated guess, I'm not so hot when it comes to home networking matters.This doesn't happen on any other computer.
View 12 Replies View RelatedSo I've had this problem ever since I bought my computer. The only wireless connection that I am able to connect to, is the one in my home. If i travel anywhere else, my laptop refuses to let me connect. The thing is, my laptop sees the connections, but when I click "connect", the box closes and nothing happens. The laptop seems as though it doesn't even try to connect to the network. Everything remains the same, yet when I come to my house, it connects automatically. Now if I click "Add" on the network config. it won't even let me add a network to my computer or anything. I click the "Add" button and nothing happens. I am running a Windows XP.
View 1 Replies View RelatedI have a laptop (win7) and desktop (vista) in a network. The laptop is wireless and the desktop is hard-wired into a d-link router. My computer recently updated and since then I cannot connect to my desktop from my laptop. The desktop shows up in the network map but when I click it, it hangs and says "network path not found". I can ping the IP and the name of the PC from command line but I cannot access it. I have internet connectivity the whole time regardless and I've tried multiple routers.
View 16 Replies View RelatedI can't find the third computer on my network. All the computers connect to the internet but only the two XP computers show up via my network places. I try to setup an office network on all of the computers to see if it works. I can still only get the XP computers to connect. My main goal is to be able to create a private network to share files between the 3 computers. This is for a small office in a corporate building so it has to be private.The third computer is running on Vista which I don't know how to use at all as I only have win7/xp at my house.
View 10 Replies View Related