How To Setup A Home Server

Sep 4, 2012

I host a minecraft server for my friends, but I always have to give them my ip every time because my ip changes everyday, and that is really annoying.

View 11 Replies


ADVERTISEMENT

Home Network :: FTP Server Monitoring Setup?

Dec 11, 2012

I have an exhibition next saturday on network monitoring and I was given ftp server monitoring project. I'm only allowed to used linux based OS for this project. Right now I have 3 notebook. 1 as a client, 1 as a router and another 1 is for monitoring. Right now, I only can make a connection between the client and monitor notebook by using Freebsd in the router. How to setup a ftp server and how to monitor it?

View 6 Replies View Related

To Setup Home Network With Old Computer As Server

Nov 21, 2011

I am just wondering how to set up a home network with an old computer used as a server... we will have a wii, ps3, lap top, and 2 desktops connected to the network as well as two dell printers. The laptop runs windows XP and the desktops run windows vista. The old computer will will use as a server is windows xp or windows 98 (most likely wont use that computer). What will i have to do to set this up and run the server as well as the network.

View 9 Replies View Related

How To Setup Home Server And Restricting Users

Feb 20, 2013

I am a networking student so have access to a free copy of Windows Server 2012. I want to setup and get experience with AD, DHCP, and DNS, among other services. Right now I have a Netgear router attached to a Cisco switch. (studying for CCENT cert) I have my desktop and server plugged into switch. I want my desktop to connect to the domain for testing and messing aroudn with. My wife has a netboook, smartphone, and wireless ipod. I'd like her 3 devices to get an IP from the DHCP server without having her authenticate to the server. Will the Netgear router allow this since wirless access is on? Or will she need to authenticate with the server to get a DHCP IP? I am gonig to disable the router's DHCP service.

View 3 Replies View Related

Home Network :: How To Setup Server To Be Able To Give Permanent IP To Each PC

Mar 21, 2012

I am very newbie to networking. Although I am a newbie I managed to install Windows Server 2003 by following instructions got from Google but have not played around completely. I have 2 PCs with XP, 1 unmanaged switch. If I connect the 3 PCs (2 Xp clients + 1 server) using one unmanaged switch,

1. how do I setup the server to be able to give permanent IP to each PC (clients)?

2 how do I make the 2 PC be able to access the server?

View 2 Replies View Related

How To Setup A Windows XP File / Printer Home Server

Jan 21, 2013

I would like to set up a home server, that will sit under the stairs so that it can link to out BT home hub (v3). The idea is then to connect the printer to it, so that we can have both a wireless printer and a central file store for pictures/vids etc.Is XP ok for this? if so, what settings do I need to change/add?Is there any software that I need to make it work?How do I make sure that it is secure for external hacking? As it will contain our personal docs/photos etc and I would hate to use them.

View 1 Replies View Related

Setup Home Network To Run A DLNA Server For Videos / Music?

Dec 23, 2011

I want to setup my home network to run a DLNA server for videos, music, etc. I know that there are many new routers and NAS devices out there that now have the capability to run a DLNA server built-in. My question is, which would provide a better DLNA server: one that is built into the router or one that is built into the NAS device?

View 3 Replies View Related

Linksys Wireless Router :: Setup EA6500 To Accept FTP Requests To Windows Home Server?

Apr 18, 2013

I am looking at buying the EA6500 router.  However, before I make the investment into buying this router, I need to know some basic information first.

1. I want to setup the EA6500 to accept FTP requests to my Windows Home Server.   Yes or No?
2. Remote access to the EA6500,  Yes or No?  i am aware of the security risks
3. I need to setup Port forwarding on the EA6500.  I assume I can?
4. Manage a Kindle Fire and other wireless devices?

View 5 Replies View Related

Home Network :: Playing MPEG-2 File In Webpage From Home Server?

Dec 20, 2012

I have setup a webserver on my home PC and I have forwarded port 80 on my router to the IP adress of the PC that is running the web server. The web server is working great; I can get to my web pages from outside of my home by going to http://MyIpAddress/Anyway, the problem is with the Windows Media Player plugin I'm using. I want to embed 6GB MPEG-2 videos into my web pages. I have some videos on my PC and I want to be able to watch them remotely by connecting into my web page. It works fine when I'm at home; other PCs can connect and play the videos no problem. The problem is when I'm at work. When I'm at work, I go to my web page (via my IP address in a web browser) and the Media Player plugin says "Connecting" for a minute, then it says Ready, but the video will not play. I tried using a smaller, AVI file (680 MB) instead to see if the problem was streaming such a large file, but the video still would not play.Do I need to foward more ports on my router so that Windows Media Player can connect back and get the information it needs?

View 4 Replies View Related

Home Network :: Advanced Home Network Setup (3 Subnets) And Port Forwarding?

Feb 24, 2013

I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:

- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface

Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.

- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.

- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.

Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.

Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)

Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).

View 5 Replies View Related

ITunes Server For Windows Home Server 2011?

Mar 10, 2011

Is there an iTunes Server for WHS 2011 available?

View 3 Replies View Related

MSCHAPv2 / Setup Secure VPN Server Using Windows Server 2012 Without Domain?

Jan 10, 2013

i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:

PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication

Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.

However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.

My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?

View 1 Replies View Related

How To Setup Home Network With Two Pc

Aug 31, 2011

how to setup a home network with two pc direc

View 1 Replies View Related

ISP / Verizon - How To Setup Home Network

Sep 20, 2011

I have a router supplied by my ISP, Verizon[a g-router] using with 2 desktop and 2 laptop computers. All but 1 laptop are still running XP.So far I have not tried to print over the network. The printer is connected to the desktop that is also wired to the router.how to setup printing across this wireless network. Must I setup another internal home network in order to do wireless printing?

View 1 Replies View Related

Setup 2 Routers On Home Network?

Jan 24, 2012

I have a SMC Rogers router and need to extend the range due to dead spots in house. I have purchased a D-Link N300 dir-615 router . can i just hook it to the eathernet lines I have on the second floor to extend range of the wireless network? How do I set it up IP address for best results? concerned that 2 IP addresses would not work at same time??

View 1 Replies View Related

Setup Home Network With Two Routers?

Jan 20, 2013

I'm trying to set up my home network with two routers. One as the LAN router and the other as the access point. I have a really nice router and an older router, I'll just leave it at that. One router will be connected to the modem, the other in my game room for the wireless access point. I want to use the nicer, newer router as the LAN router or the wireless access point?

View 1 Replies View Related

How To Setup Small Home Network

Sep 5, 2012

How would I go about setting up a network at my house. I have two desktops and a netbook all hooked to a switch and the switch to the router.

View 2 Replies View Related

Xbox 360 Slim Home LAN Setup?

Nov 27, 2012

is it possible to setup 3 x xbox 360's in a home network, 1 is mine, connected to live, the other 2 are for the kids but i just want to setup local network gaming with the kids but also so they cannot connect to live account as they still young. i'm looking to run game on mine and stream / share a multiplayer game with the kids but restrict their internet access?

View 2 Replies View Related

Setup A Wireless Network Within Home?

Apr 27, 2012

I am trying to set up a wireless network within my home, i have a external hard drive and was wondering can i connect this to my internet router to make it accessible in order to stream music and movies from the hard drive. there is no ethernet port on the hard drive but seen a usb to ethernet adapter is this all that would be needed?

View 1 Replies View Related

Home Network Laptop Setup

Nov 6, 2012

I want to set laptop 1 at home music receiver location. laptop 1 will be used to play music and play music from web over home stereo. I want to be able to access laptop 1 from other devices, iphone 5, other laptops and have the ability to remotely change the music.Laptop 1 can be connected via network cable or wireless to wireless home modem.

View 3 Replies View Related

Home Network :: How To Setup Vmware To Run A Database

Feb 27, 2012

I need to run a datebase for training, but the room i use dose not have network access so therefore thought i could use vmware.

View 2 Replies View Related

Home Network :: WAN Access With VLAN Setup?

Mar 18, 2013

I am extremely new to network but also excited with the things you can achieve with a Cisco switch.For about 3 months I sat down looking at my "Cisco C2950-24 Switch", this surely for such a beastly looking thing it must be able to do something other than just allow you to plug in cables. So with that said I started to do some reading and watched a couple of You Tube Videos.I am on the route to complete my first goal and thats have my own VLAN setup with 1 Server and 6 clients. The Server is running ESXi therefore a few other servers are running inside it too.So my VLAN - VLANID 20 running the network 172.22.22.0. On the physical switch I have the following:Port 1 - WAN incoming connection from my Router on the network 192.168.178.0Port 2 thru 9 all running on VLAN 20.By the way I am using the GUI Cisco Network assistant

View 4 Replies View Related

Home Network :: How To Setup Wireless Bridging

Sep 11, 2012

I have this setup at home and I can't make wireless bridging to work with two WR740N routers.I tried 3 online tutorials and none of them worked

R1,R2,R3 = routers
The main router "R1" Is setup like this :
IP Address 192.168.100.1
DHCP enabled 192.168.100.120 - 192.168.100.150
Gateway 192.168.100.1

[code]....

View 1 Replies View Related

Home Network Setup - Speed Up Connection?

Feb 10, 2012

I have connected my Vista laptop to my old XP laptop using a network cable so that I can share files, printers, etc freely.I have forgotten the correct proceedure for doing this, although the two computers eventually, after a long time link up and I am able to share files. I have done nothing else. I have not entered numbers or anything. The number spaces are blank.I do not understand why it is working at all, but how do I speed up the connection?

View 14 Replies View Related

Setup Wifi At Home With No Internet Connection?

Jan 29, 2012

How do I set up wifi at home if I don't have internet at home? would the mifi from virgin mobile work?

View 1 Replies View Related

Home Network :: Cannot Setup NAT On Edimax Router

Aug 10, 2012

Cannot setup NAT on edimax router I ve got this setup: [URL] It works well - I can connect from TESTPC and LAPTOP (bottom left corner) to SERVERS A/B/C (bottom right corner) without any problem. Everything seems to be routed perfectly, however from SERVERS A/B/C I cannot ping TESTPC and LAPTOP, and I can't even establish an RDP connection.I was told to setup static routes or NAT, but I am at a loss on how to do it. I am using an EDIMAX BR-6424NL wireless router ?

View 1 Replies View Related

Setup A Home Wifi Network With Windows 7?

Jan 8, 2012

how to setup a home wifi network with windows 7?I want to access internet of the main laptop (has internet using a dongle)for my other laptop which has no direct internet connection at the moment, but wifi enable.

View 2 Replies View Related

Cisco :: Want To Setup A ASA5505 To Comcast Home Mode?

Feb 5, 2013

New to Cisco but learning some. Needing to know what I should code into CLI on my ASA5505 to make it work with comcast modem which uses DHCP for it's addressing from Comcast proper.

View 2 Replies View Related

WEP Security Setup - Can't Connect To Home Wireless Network

Feb 23, 2013

I have a work supplied laptop. Used to be able to connect to my home wireless network - this stopped working last week. It can connect to other wireless networks, both at the office and other public places, but can't connect to my home network.

I've tried: Manually creating the wireless network Removing the profile from regedit Removing the profile from ProgramDataMicrosoftWlansvcsProfiles

It sees the network and attempts to connect, but never successfully connect. I have other laptops at home that are working just fine. The network is setup with WEP security, and I've entered/reentered the password several times.

Note, when I started this, the home network did not appear under the Manage Wireless Networks list in the Network and Sharing Center.

View 1 Replies View Related

Dir-615 Dlink Router - How To Setup Wifi Home Network

Oct 13, 2011

I have a dir-615 D-link router. It is well installed with my main computer that is an old XP windows system. I tried to create a network to give acces to my friend laptop when he comes home(he has a mac). I setuped a network with a name and a password. So my friend could find the network name and i gave him the password, but it never works. Another friend of mine also came with an older iBook laptop and the same thing happens.

View 5 Replies View Related

Home Network :: 2 Router Setup / Which Way Is Communication When Transferring

Apr 15, 2012

1 Virgin media home home up stairs in the home office. Ether cable running from the home hub, outside the house to the downstairs lounge with an ethernet socket on the end. Cable from the socket into a dlink router (set to operate as a hub).My reason for this setup was due to the rubbish wireless signal from the virgin hub, and the fact that I have various other bits of kit downstairs that I could use an ethernet cable with.The question is, IF my laptops are connected to the router downstairs by an ethernet cable and I want to transfer some files between them, will the data be routed through the virgin media hub upstairs before coming back to the router that both laptops are connected to downstairs? I have just done a test with 30gb worth of files and the transfer speed was 8.7MB/second, is that good for wireless?

View 1 Replies View Related

Hp 620 / Dell D610 - Setup Wireless Ad-hoc Between Two Home Laptops?

Sep 2, 2011

I just got a new Hp 620(windows 7 professional) and still got the Dell D610 (Xp service pack 2)i used before i intend to establish a home wireless ad-hoc connection between these two laptops.

View 5 Replies View Related

Linksys Cable / DSL :: WAG200G - Home Gateway Setup

Jun 25, 2012

I have a Linksys WAG200G wireless ADSL router. So it has one ADSL(phone) line input port , 4 Ethernet ports and wireless router. My router is fine and works well on ADSL connections. But as I have switched to Comcast DOCSIS modem based internet connection now, I want to to setup this router as "Home Gateway" only and not the modem. My intention is to use- use 1 of the 4 ethernet ports at the back of router as an INPUT . I want to put the ethernet output of the DOCSIS modem into this INPUT- and then i want to use the remaining 3 Ethernet ports as OUTPUT ports from the router.- I also want to work my router as Wireless router.

My query is- Is this possible ? Basically use 1 port as an input and 3 as output.- I have tried different things - Using Bridge mode only. DHCP disabled but sometimes only wireless works and other times only LAN bridge setup works but both do not work together.- Also at times, one Ethernet port will work as an INPUT and 1 as an OUTPUT but other two remain disabled.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved