Cisco WAN :: Block Some Port From Outside To Inside On Router 2911
Sep 5, 2012What is the configuration for allow port from Outside to inside( 80,21,https...) and i want to allow traffic from outside to inside only 80,https and 21.
View 1 Replies
ADVERTISEMENT
Cisco WAN :: Allow Port From Outside To Inside On Router 2911
Sep 5, 2012i am trying to upgrade the firmware in my C2960 switch to 15(1) SE2, and i get the error: Failed to execute the command archive download -sw /overwrite /http iosFile.
View 10 Replies View RelatedCisco WAN :: Permit Connection From Outside To Inside In 2911 Router?
Jan 24, 2012I need to permit the connection from outside to inside in a 2911 Cisco router, only from an Public IP Address (suppose 1.1.1.1) to some local private IPs.
I have one question:
Using the command:
ip nat inside source static tcp <local ip> <port> <global ip> <port>
The "global IP" can be the Public IP from where the connection starts (in this case 1.1.1.1)? or it must be the Public IP assigned the the Router interface connected to the Public Network.
Cisco Firewall :: Block Gtalk On New 2911 Security Enabled Router?
May 8, 2010I want to block gtalk on my new cisco 2911 security enabled router.
View 3 Replies View RelatedCisco WAN :: 2911 - Web Server Not Accessible From Inside
Oct 7, 2012In my client office, We have replaced small business router cisco RV042 with Cisco ISR router 2911, in that router we have configured NAT to allow internal user to access internet and port forwarding for outside user to access web servers and other application that are hosted internally.
we are not able to access [URL] (name changed) from internally and one of the application that are runnning on port no. 8280., and same is working properly from outside the network.other application that running on 8287 is accessible form internally.
We are accessing with ip address http://192.168.1.51:8280. and [URL] not working from inside.
But all works fine with old cisco RV042.
Cisco WAN :: 2911 - IP Nat Inside Source Static
May 6, 2012I need to open a port in a Cisco 2911 router to permit the conexion to an equipment that is inside the LAN, but I my configuration doesn't workt.
I have 3 interfaces configured: two WAN interfaces (one is a backup of the other) and a LAN interface. The configuration is this (public IPs are changed):
track 1 ip sla 1 reachability
!
!
interface GigabitEthernet0/0
description backup
ip address 176.55.25.25 255.255.255.252
ip nat outside(code )
Cisco VPN :: ASA5520 How To Block Bittorrent Download From Inside Network
Apr 12, 2011We are using ASA 5520.We have blocked port 80 and 443 from Inside to any destination .Below that we have another rule which alow any to any for IP. how to block bittorrent download from inside network. I can't block P2P ports since SYKPE is also using P2P.
View 3 Replies View RelatedCisco Switching/Routing :: 2911 / Block All Traffic But Allow One Way Data Transfer?
Feb 5, 2013I am trying to connect a Control network that can not have access to the Internet, or any other network for that matter, to my Admin network so that I can retrieve trend data about the plant that goes into a database. Right now the process is print information, hand jam into excel spreadsheet, print again, and hand jam into another excel spreadsheet on the other network. Reports are printed automatically once a day, but would like a simplified way of getting data from one network to the other without having to re-enter data several times. Current policies stipulate no USB drives connected to Control systems. Even if we could loosen that, personnel needed to transfer data is not available and going to each individual machine would take more time than current system.Now that background is laid, I have two 2911 ISR routers with EIGRP configured, each with a 4 port EHWIC card. The 3 L3 ports on the router are setup as follows: interface G0/1 to the internet, interface G0/2 to a wireless back haul, and interface G0/0 for IT network. I then have 3 VLANs setup on the EHWICs for our Admin network. We will move the IT network to a VLAN on the remaining EHWIC port and connect the two 2911's through the G0/0 interface. I am going to have one computer on my Administration network dedicated to receiving the information and have a program that will take that data and import it to a database. I need to allow only that computer to receive traffic from the Control network and I need no traffic to flow back into the Control network. In other words I will transmit data from the control network to the admin computer using one protocol (TFTP more than likely) and block any other traffic coming out of and going into the Control network.
View 1 Replies View RelatedCisco WAN :: Multiple SVI Interfaces On 871 Router / 2911 With Built In 8 Port Switch
Sep 17, 2011I am wondering if xconnect L2TPV3 feature could be done on multiple SVI interfaces on 871 router and 2911 router with built in 8 port switch?Like I need to extend two ethernet interfaces and can I use two SVIs on router built-in switch module on each side?
View 2 Replies View RelatedCisco WAN :: 7200 - How To Block SMTP Port 25 On Router
Jan 24, 2012We are running ISP and now a days we have many spam in our network, we want block the SMTP port 25 block on Cisco router 7200. So we can block the spam in our network.
View 3 Replies View RelatedCisco Firewall :: ASA 5520 - Moving Inside Port To 1gb SFP Port
Jun 11, 2012We have an ASA 5520 and it's inside interface is currently plugged into a fast ethernet port on a 3750. I have just bought a 1gig SFP module and have copied the fast ethernet port config to the gigabit port, but the port seems to be flapping
The port conf gi is this:
interface GigabitEthernet1/0/4
description Link to Inside ASA
switchport access vlan 2
switchport trunk encapsulation dot1q
Cisco WAN :: 2911 - Get Away With Configuring Blackbox With RJ45 To Copper Port On Router Ethernet?
Apr 27, 2011Purchased a 2911 router for a customer, and I'm sure I'm missing a module here.
Teleco installed T1 and left connection to smart jack. Router only has 2-3 copper ports.
Can I get away with configuring the blackbox with RJ45 to the copper port on the router ethernet or do I need to purchase a HWIC ?
Block Port 443 Only For Skype In Tp Link Router?
Jul 24, 2012Except email, we want to block every thing for users temporarily through router.If I block all ports from 400 to 65334, skype doesn't work but email also doesn't work.If I open only port 443 among blocked, both email and skype works.
View 1 Replies View RelatedCisco Firewall :: Configure 2911 ISR To Block Peer-to-peer Traffic?
Jul 25, 2011I see that Application protection - blocking peer-to-peer file sharing traffic is a capability of Cisco IOS Firewall. How do i configure my Cisco 2911 ISR to block peer-to-peer file sharing traffic?
View 1 Replies View RelatedCisco Firewall :: 5520 / Add NAT For Outside X.x.x.77 Going Inside X.x.x.22 Port 80?
Oct 3, 2012I have an ASA 5520 Cisco Adaptive Security Appliance Software Version 8.4(2)8 Device Manager Version 6.4(5)206. I am trying to add a nat for outside x.x.x.77 port going inside x.x.x.22 port 80 . the wan interface is .74 with subnet of 255.255.255.248 the rule will add but traffic wont pass in.
View 14 Replies View RelatedCisco Firewall :: ASA 8.4(4)1 / Port Forward From The Outside To Inside?
Nov 20, 2012My internet works. However port forwarding does not work. I want to port forward from the outside to inside obviously. I get an error in my log file which Ill show you and then I will share the running-config I have tried using this method found elsewhere.
========================================================================================================
ATTEMPTED CONFIG
object network inside-host
host 192.168.100.4
nat (inside,outside) static interface service tcp 3389 3389
access-list Outside-2-Inside line 1 extended permit tcp any host 192.168.100.4 eq 3389 log informational interval 300
access-group Outside-2-Inside in interface outside
[code]....
Cisco WAN :: 2911 Console Port Giving No Response
Apr 6, 2012I have a brand new 2911 router out of the box. I attached a terminal to the console port and watched the bootup sequence. I get the "press return to get started" at the end but I can't get any response. I just used the same cable and terminal on a 3750 switch and an ASA. What am I missing?
View 3 Replies View RelatedHow To Block Port 80
Mar 14, 2011How to block port 80 IN xp
View 1 Replies View RelatedCisco VPN :: 2911 / Port Address Translation For Remote Network?
Aug 4, 2012I have site to site vpn between cisco asa and cisco 2911 router.asa is static ip and cisco 2911 side is dynamic ip. my site to site vpn is working fine. I am just trying to make PAT over the vpn means i want forward one ip in my public pool to one of my local ip in the cisco 2911 side.
View 2 Replies View RelatedCisco Switching/Routing :: 2911 - No Response From Console Port
May 3, 2013I attached the terminal to the console port to watch the bootup sequense, but nothing appear the same cable used on athor switches and router without any issue.procedure to access the router noting that Giga ports not working also.
View 2 Replies View RelatedCisco Switching/Routing :: 2911/ 2921 Management Port
Oct 25, 2012I can not find any information about management port of Cisco ISR 2911, 2921 and so on. There is management port in specification of 2911 and 2921 and I do not know if this port can be as a simple Ethernet port – forward traffic in/out on L3.
View 2 Replies View RelatedCisco Firewall :: ASA5505 Port Forwarding For Inside Server
Dec 20, 2011I have installed ASA5505 in the network. Port forwarding has been done for one of the server in our LAN. Public users are able to access the server successfully. I am trying to access from inside using the same Public server IP, but unable to access it. Can I have this feature in ASA5505(I think it is loopback configuration). If so, may I know the configuration detail?
View 4 Replies View RelatedHow To Block A Port On Local PC
Sep 25, 2011I dont currently have access to the router and i was wondering is there a anti-virus program that allows you to block ports to the local pc? Or is there another way to block programs using peer-peer network connections such as PPS.
View 3 Replies View RelatedHow To Block Port 8080
Feb 23, 2011how do I block / unblock ports in ASA Firewall 5500 series?
View 2 Replies View RelatedCisco WAN :: 2911 - Physical Single RJ45 Port To Handle Multiple WAN IPs?
Nov 7, 2011I am learning the 2911 router. Is there a way to set a physical single RJ45 port to handle multiple WAN IPs? Or do I need to buy a port expansion module.
View 12 Replies View RelatedCisco Security :: Block Port 135 Using CSA 6.0.2.145 On Windows 7?
Mar 13, 2011I have installed CSA on windows 7 with rule to block rpc port 135.But when i am scannig this host, this port is still opened.I changed OS to Win Vista,Win7 x86, but there is no changes.Is it possible to block port 135 using CSA on windows 7?
View 2 Replies View RelatedCisco WAN :: 2960 - Block Outgoing Multicast On L2 Port?
Aug 2, 2012is it possible to block outgonig multicast L2 frames on an Ethernet port in outgoing direction on a 2960 Switch?
I tried the "switchport block multicast" command, but the description of this feature relates to only "unknown" multicast!?
But what means "unknown multicast"? Even if activated, I see a lot of multicast traffic going out that port: IGMP, PIM, SSDP, HSRP, OSPF, .. and also pings and VLC streams to multicastaddresses (ip igmp snooping disabled).
I also tried to map a "mac access-list" to that port, but the "mac access-group" interface command is restricted to only incoming traffic.
Reason: we assume, that there are a couple of specific enddevices, that might react strange to some multicast. Therefor we would like to block outgoing multicast on that specific ports.
I tested it on a 2960 12.2(53)SE2
Cisco Switching/Routing :: C2960S / Prevent Traffic Per Port Or Inside VLan
Nov 27, 2012I want to know what is the best way to black traffic inside the same VLAN, this VLAN is a user VLAN, it means that I am talking about access layer.I wanted to use private vlan, but C2960S doesn't support this feature. Any other way to prevent any to any traffic in the user vlan, this vlan only have to speak at the Layer 3.
View 2 Replies View RelatedD-Link DIR-655 :: Outlook / Exchange Port Block
Aug 22, 2011I can connect to Internet perfectly fine. I can even VPN back into my office. However, once connected via VPN and I launch my Outlook Client, I'm not able to connect to get emails. When I run a "netstat -a", I get my "SYN_SENT" to all my office domain controllers and exchange servers.However, if I connected via my Starhub USB Broadband dongle, everything works perfectly fine.What settings do I need to do on my router? I tried port forwarding and application rules but none worked.
View 4 Replies View RelatedCisco Firewall :: ASA 5510 - Setting Up SMTP Port Block?
Mar 5, 2012how to go about setting up the ASA to block any SMTP traffic outbound except for our Exchange Server. This is in relationship to a SpamBot issue that blacklisted us. I have an ASA 5510 running version 6.2(5) / 8.2(2) with three ports. DMZ, Inside and the Outside interface. Up till today, I only needed to block outside traffic to our internal network which I used the ASDM to configure a rule on the outside interface for an incoming rule. I am assuming I need to create an outgoing rule on the outside interface; however, just to make sure I understand the terminology/traffic flow, I created the rule with my computer as the source (192.168.0.131) with ALL destination and the service as HTTP. My logic, which seems to fail here, is that any traffic from my computer going outbound would be blocked; however I am still able to browse... That said, if I were to change the source as the Exchange server and the Service Type to SMTP, it would not actually block traffic and therefore not solve our problem. I even gone as far as permitting traffic from my computer, expanding the hit counter and I see no hits. So I am no doubt doing this wrong. What I do know, is when I first created the rule, a second rule was automatically created (Implicit rule) that deny all sources and blocked all HTTP traffic until I changed it to Permit?
View 2 Replies View RelatedCisco Firewall :: 5505 Block Port 80 On A Specific Host In LAN
Apr 22, 2012I'm using an ASA5505 (8.4(1)) and would like to block port 80 on a specific host in the LAN so machines in other remote LANs connected via VPN can't access this port on the host. Devices in the local LAN should have access to this port on the host. Here are the commands I'm using:
-access-list block_port extended deny tcp any host 10.20.10.20 eq 80
-access-list block_port extended permit ip any any
-access-group block_port out interface inside
These commands are not working as I would expect them to. When I browse to http://10.20.10.20 from a remote machine over the VPN tunnel I am able to access the host web server.
Cisco Switching/Routing :: 3550 / Access List - Block One Ip Or Port
Jan 9, 2012I have a layer 3 switch, 3550.I have several vlans on there just for playing around with. One of the vlans, has a vonage linksys box attached to it with a UK number attached. From time to time telemarketers call at 03:00 in the morning, this as I'm sure you can imagine is not much fun. The linksys box gets 192.168.3.3 as it's ip.The switch is connected to a non cisco router at 192.168.0.1
interface FastEthernet0/24
no switchport
ip address 192.168.0.2 255.255.255.0
I was thinking a time based access list would work best I have tried several variations but the phone still rings. I have tried access-list 1 deny host 192.168.3.3 permit ..... and more extensive lists but the phone still rings. I have not applied the time-range yet, so that's not the problem.I have applied the list to the vlan interface and to fa0/24 but it's not working.
How Does Firewall Block Or Filter Traffic On Specific Port Or IP Address
Nov 15, 2011How does a firewall block or filter traffic on a specific port or IP address?
View 1 Replies View Related