I have an issue/doubt regarding the configuration of a modem + router. The modem is a netopia-3000 (who care ) and the router is a netgear WGR614V9, The first has the address 192.168.1.1, the second 192.168.0.1 My pc in dhcp take the address from the router (192.168.0.x) and internet work, but if I set the ip manually 192.168.1.x it stop to work, why?
View 1 Replies
I want to port forward, so i can broadcast using icecast but it requires me to access my router. I follow the steps from Setting a Static IP Address in Windows 7 - PortForward.com but from step 4 where i have to access my router in my browser,i write my ip which is: 10.0.0.4 according to cmd, and i just get a "Oops! Google Chrome could not connect to 10.0.0.4" message.I have attached a picture showing info from my cmd. It's in danish but i don't think that should be a problem.
View 3 Replies View Relatedhow do i open a port on Motorola modem
View 1 Replies View RelatedI vave a zyxel p-660HW-T1 v2.I need to do PORT FORWARDING since I want to use an IP Camera in order to have remote access to video.I do not find PORT FORWARDING in the modem configuration. I find NAT, but not port forwarding.
View 1 Replies View RelatedI am considered as a novice when it comes to networking, modems/routers etc.I have a Belkin Modem/Router, I need ports TCP 80, 2300 and UDP 2310 I think to be forwarded so I can play a certain game online (Age of Empires 3). I have tried DMZ mode for my pc and I can play the game online but only with DMZ enabled. Just some extra info.Belkin Modem/Router model : F5D7634-4A-H v2 (on the device)F5D7634-4-H v2 (01) (on the online settings (192.168.2.1))It has the latest firmware as I have clicked on the firmware update and it says "There is no new firmware update available for this Router!"
View 11 Replies View RelatedI just want to open up a few ports for Age of Empires 3 but no matter what I do the ports still stay closed.I have a Belkin F6D4630-4 v2 modem/router (firmware updated to 2.00.25) and I use https:[url].... to check my ports.
I've forwarded the ports 2300-2310 in my router (both TCP and UDP) using the 'virtual servers' thing.
I've disabled windows firewall.
I've disabled my AVG antivirus.
I've disabled and enabled this thing to see if it would make a difference:
"UPNP Enabling:
Allows you to turn the UPNP feature of the Router on or off. If you use applications that support UPnP, enabling UPnP will allow these applications to automatically configure the router." When I probe the ports from 2280 to 2330 using the Gibson research website, the ports I forwarded (2300-2310) say 'closed' and the others say 'stealth'. Why do they say CLOSED and not OPEN? There shouldn't be anything blocking those ports.
When I probe the ports from 2280 to 2330 with windows firewall ON, all of them say 'stealth', even though I've added those ports to the windows firewall exceptions.I just want those ports to say "OPEN" so I can join all games on Age of Empires 3 instead of coming up with the message "Failed to join game".
how do i open port 22 in my router
View 1 Replies View Relatedi have isp ip address i have opened port 9000,37777, 80 but when i check my port if there opened or not it keeps on say block?
View 1 Replies View Relatedrecently my brother has blocked some ports on our home router because he thinks i play too much video games. ( i actually dont play a lot ! ). He says there are alternative ways to make it work again and challenges me to figure out how to change the ports back to normal but he would not give me the access to the router, meaning i dont know the Login and password for it. Plus I am not allowed to reset the router to factory settings. For about three days I have been looking up ways to change the ports on my router through my computer but nothing has worked so far. I have a gaming tournament coming up and I really need to practice with my team but i cant get access to it.below is my system's information,
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A6-3400M APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 4
RAM: 3560 Mb
Graphics Card: AMD Radeon(TM) HD 6520G, 512 Mb
Hard Drives: C: Total - 468745 MB, Free - 420932 MB;
Motherboard: ASUSTeK Computer Inc., K53Z
Antivirus: None
I am trying to host my own Minecraft server on my home desktop PC and I can't get my router to open port 25565 but it won't. I tried everything and I have concluded that my router's ports are all closed and can't open. I've tried using multiple DNS providers and DMZ but none worked. I have restarted my computer, restarted, rebooted, and reset my router and modem and still nothing. I have a Linksys e1000 router.
View 15 Replies View RelatedRegion : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 2.1
ISP : PTCL
trying to connect to router configuration (after several factory resets) at 192.168.0.1 but each time screen displays invalid username / password,doesnot even display username / password window,using admin as username and password,just cannot log on to configuration setup
how to open UDP port 16000 in my router Zyxel MAX 206 M1R...when i tried to start AGE OF EMPIRE 2 THE AGE OF THE KING in gameranger it says that my UDP port 16000 is not opened...so i am trying to open it..
View 2 Replies View RelatedA external scan has reviled that I have an open port. For security reasons I want to close it. I do know the port number.
View 7 Replies View Relatedi want to open portforward to utorrent in arouter but i cant open the addres of the router lookand when i go to local area connection status /status/detailsi found number of ip but there is no gateway i take whole ip and put them in browser and its dont open but the last friday i wake up in 3am run cmd and put ipconfigi found the gateway 192.168.2.45put it it in browser its open want username and pass i know them but i see lets doit next day going to bed next day the gate way reverse to the stupid gateway in in the pic i cant use aprogram to open port as i cant knowing my router mode
View 1 Replies View RelatedI have D-Link's DSL-2730U modem/router. I've enabled the router's firewall and disabled TR-069 (putting in some dummy ACS URL and login credentials as well). However port scans show 30005 as open. I believe this is used by the TR-069 client. How do I definitively filter this port?
View 9 Replies View RelatedI want to know how could I configure a Router Cisco DDR2201v1 for watching my CCTV System from anywhere with a internet connection. I already try to open a port in the NAT virtual server configuration but it didn't work.
View 1 Replies View RelatedHow to open port 443 on my wireless router model WRT54G3G-AT? For a secure business connection. Plese don't give me a link to follow, I've tried that one.
View 1 Replies View RelatedI'm using Cisco Connect Cloud to connect to my E4200 router. I wish to open my NAT type as currently its moderate on all games.Where the hell is the area to add the port ranges?? Is it even an option on the new connect cloud? If it is, it doesn't make it very easy to find. Would be allot easier if you had a tab/app for "Gaming/Applications" like you did previously.
View 1 Replies View RelatedHave a E4200 with version 1.0.04 firmware.Been trying to open 9000 to access my buffalo media server remotely. Have set up both Single Port and Port Range Forwarding for port 9000.On trying to access media server, get message " could not connect to xxx.xxx.x.xxx:9000"Using online Open Ports Checkers shows this port is closed.
- Tried disabling all firewalls.
- tried range of ports
- Enabled/Disabled UPnP
- tried cisco & buffalo tech support
I purchased a Cisco 1750 router. I was able to access my cameras from my iPhone before I setup this router. Now I can get my cameras to work. I need to setup port 80. I followed the instructions on how to do it but for some reason the cameras do not work on my iPhone.
View 1 Replies View RelatedI need to open port 4001 on my router for someone to have access. I need to do this thru GUI. Cisco ASA 5505
View 5 Replies View RelatedI own an E4200 and my wife and I use Goodreader on our ipads at home. To add docs to goodreader we need to connect to the ipads ip on port 8080 but the E4200 is blocking all traffic for it. How can I open port 8080 for our 2 ipads?
View 1 Replies View Related I have 4 public IPs on Router 3845 interface FastEthernet 0/0/1. IP as below.
50.200.2.2
50.200.2.3 secondary
50.200.2.4 secondary
50.200.2.5 secondary
I wan to allow ports 80 to 90 on 50.200.2.3 for my webserver (192.168.10.50)
I am having a NAT issue with my two xboxes. The router is an e1000 v2.1 firmware 2.1.02. One xbox is wired into the router and the other has a wireless adapter. The wireless xbox gets open nat automatically, while the wired one's nat is strict. If i mess with DMZ and turn UPnP off i can get the wired to be open but the wireless one to be strict. Also port forwarding does not seem to work because only one or the other xboxes will get an open NAT. I do have the the correct ports in the port triggering section set to on but that does not seem like it works.
View 5 Replies View RelatedI have only recently noticed a HUGE decrease in my Utorrent speeds, so i thought i would have a gander and lo and behold.apparently the port Utorrent uses wasn't open. Now, i have tried about 10 different port numbers, made sure Utorrent is being accepted by Norton 360 Firewall,followed complicated directions to (i think) foward ports, and also follow directions to open a specific port.Nothing has worked so far, Utorrent still comes back with a port closed error.
View 1 Replies View RelatedThe problem is I don't know what to do to open my modem's ports because every single of them except of 80 is blocked,im having some latency problems on online games etc, I asked my ISP and they didnt probably understand what the port is they offered me changing my IP to PUBLIC IP for onetime payment, seeing as they probably dont know what the port is im confused now, will the public ip unblock the other ports?
View 19 Replies View RelatedI have a TPLink WDR3600 wireless router wired to AT&T's cable modem.
The modem assigned this ip to the router: 192.168.1.60.
The router creates a network with these IPs: 192.168.0.x
Question: I want to be able to RDP into my laptop that's connected to the router (ip: 192.168.0.4). Before I had a router I would just open the firewall on the cable modem and expose the laptop but now it feels like there's two layers i need to go though: the cable modem and then the router.
How do those two work together? Should I put the router in the cable modem's DMZ Zone and then just work on the router?If I want to open just a port do i need to open it both on the cable modem and the router? How does the incoming connection know which device to go to? How does it know to go to 192.168.0.4 instead of 192.168.0.2 for example?
Here's the components:
1 - AT&T 2Wire cable modem. Internet comes in the house through this box. Assigns IPs like this: 192.168.1.xxx
2 - TP-Link WDR3600 gigabit/wireless router. Assigns IPs like this: 192.168.0.xxx
3. WD My Book Network Storage. Wired connection.
4. Desktop PC. Wired connection.
5. Laptop PC. Wireless.
6. 1 ipad, 2 iphones. Wireless.
Current setup:
1. internet cable goes into 2Wire Modem.Wireless on this device is OFF.
2. cable goes from LAN port on modem to WDR3600 router's internet port
3. cables go out from router to Desktop PC and Network Storage
4. all other devices are connected to the 5GHz wireless network created by the router.
Been trying for hours to open the ports on a motorola 2210-02-1022. I have a linksys wireless router. I think the default IP is 192.168.0.1 I put this in browser and get a user name and password window. What do I do from there. I have the port numbers from xbox.
View 2 Replies View RelatedI have the next config: PC -> Asus RT-N16 router (192.168.1.1) -> LinkSys WAG54G2 in bridge mode (192.168.0.1),How can I access to modem's config page from my PC ?
View 2 Replies View RelatedI have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies View RelatedI want to connect my tata photon device to my bsnl wifi modem via a usb portavailable on the bsnl modem. This is to provide a wifi network that i can use to surf the net on my phone.
View 4 Replies View RelatedI have tried everything possible with this modem and router. I cant figure it out. I tried the router in bridge mode, tried opening the ports up on both of them.
View 14 Replies View Related I just switched to Roadrunner Lightening via Brighthouse Networks. There is no configuration capability in the Cable modem/ router / wireless - Ubee provided to make the Modem a bridge. You have to call Brighthouse to do that. They indicated that they only do that for supported routers and the EA 4500 is not one of them. I'm ready to call them to say I have one of the supported modems so "do it" and then find out what happens.
Meanwhile I have connected my EA4500 through their router and have a network in a network. I've noticed another more significant problem. The speeds through the EA 4500 drop to 90%. Is there something wrong with the router configuration that would cause this significant drop in speed? I'm afraid if the problem is the EA 4500.
