Linksys Wireless Router :: Cannot Set Up 2500

Jan 31, 2013

Cannot set up 2500 router

View 8 Replies


ADVERTISEMENT

Linksys Wireless Router :: E-2500 IPhone Will Not Log On

Feb 8, 2012

I purchased a new E-2500 router and got it operating my computer, but my iphone will not log on, I set up guests and now it appears to log on, but doesn't.

View 1 Replies View Related

Linksys Wireless Router :: How To Connect 2500 To DSL Modem

Oct 17, 2012

I just moved into a new place with a DSL modem and am using the connection from the old tenant until my internet gets set up a while from now.  I can plug the ethernet straight from the modem into either my laptop or desktop, and it works perfectly fine.  But when I plug into my LinkSys 2500 router, it can't connect.  I've tried rebooting the router, the router and the modem, plugging the modem back in first, plugging the router back in first.  Nothing.  But all I have to do is pull the ethernet cable from the internet port and click it into my laptop, and voila! internet.  My name isn't on the account so I can't call the ISP and see if there are any special connection instructions, but I suspect there aren't any based on just being able to plug a computer straight into it.

View 4 Replies View Related

Linksys Wireless Router :: E-2500 How To Block Additional Sites

Dec 27, 2011

I recently purchased an E-2500, but notice that in parental controls I can only block 6 or 8 websites.  In my WRT54GS I could just create additional rules and they would work.  But in this device I am limited on the sites that can be blocked per device.  How I can block additional sites?

View 2 Replies View Related

Linksys Wireless Router :: Configure Cisco 2500 To Connect To Network

Jun 27, 2012

I have a Cisco 4200 Wireless Router connected directly to my cable modem. To extend the wireless range I purchased a Cisco 2500 Wireless Router.  As the house is "wired," I can connect the Cisco 2500 to the cable modem in a room separate from the Cisco 4200.  My question is how do I configure the Cisco 2500 to connect to the network and provide wireless coverage from both routers.

View 6 Replies View Related

Linksys Wireless Router :: E-2500 Parental Controls - Only Block 6 Or 8 Websites

Feb 14, 2012

I recently purchased an E-2500, but notice that in parental controls I can only block 6 or 8 websites.  In my WRT54GS I could just create additional rules and they would work.  But in this device I am limited on the sites that can be blocked per device.  How I can block additional sites?

View 1 Replies View Related

Linksys Wireless Router :: How To Use 2500 With Huawei Ws320 Wifi Repeater

Jun 12, 2012

I have set up my linksys in my main hall, i get a decent wifi signal in my room. But i get very very poor signals on my phones (bb9780 and Samsung S2). I bought a Huawei WS320 wifi repeater. how to connect these two so that i can get a strong enough signal in my room ?

View 2 Replies View Related

Linksys Wireless Adapters :: AE 2500 Won't Shut Down After Power Off?

Jul 23, 2012

Just up-graded my OS to Win 7 Pro and I installed the adapter with no problems.. The problem starts when trying to shut sown Win 7, when I try to power off the system, the little blue light flickers about 1/2 dozen times then goes Steady Blue and stays that way till it shuts off..I have to manully take it out of the USB port each time I shut down my PC or it will get really hot and Probably burn up. I have tried all the power options and that does nothing...This did not happen when I was running XP service pack 3 32 bit.

View 9 Replies View Related

Cisco WAN :: Can't Get 2500 Router To Go To ROMmon

Feb 16, 2012

I'm having a little trouble with a router I have got my hands on to practice for my CCNA.Im connected via serial>USB adapter and via XP HT on Win7. Router boots and I then break the boot sequence with ctrl-break. But then it does not go into ROMMON mode. It simply says this:

-System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
-Copyright (c) 1986-1995 by cisco Systems
-2500 processor with 2048 Kbytes of main memory
 
How I get it into ROMMON to reset the password on it.

View 7 Replies View Related

Cisco Switching/Routing :: Router Boots Into Router With 2500 Series

Jul 27, 2009

I m having 2500 series router. when i boot router automatically get into router(boot)> . how to solve?

View 6 Replies View Related

Cisco WAN :: Lab Router 2500 Configuration Not Working

Jun 6, 2013

I grew tired of entering my username and password in my 2500 series lab router. So I removed authentication by typing "no username xxxxxx  password xxxxxx".Different than what I expected (removal of authentication), the router still prompted me for my username, it just won't accept anything I type. 
 
I decided to do a password reset, I changed the register to 0x2102 and then typed "i" for Initialize.   It comes back with error "Configuration from version 12.0 message may not be understood correctly."   and then boots to running config with a prompt for username again....right back where I started.
 
why removing authentication by just typing "no username xxxxx password" would lock me out?If I am actually locked out or maybe there is another way to access?

View 4 Replies View Related

Cisco WAN :: 2500 Router Stopped Working

Dec 13, 2011

it stopped booting up and now i cant talk to it.

View 5 Replies View Related

Cisco Switching/Routing :: 2500 To Show The DHCP Range Of Router

Jul 29, 2012

how can I show the DHCP-range of a router if I don't have privilege level? (not in enable-mode),I can do a "show ip dhcp pool" - this will show me the range which is configured with the network-command.But there are also some dhcp-exclude-addresses which I can't see.... (I did a test on a router with full privilege-access)I need this because I have a router with limited access from our provider.

View 0 Replies View Related

Cisco Wireless :: 2500 WCS Can't Add Controller

Nov 20, 2011

I am having trouble adding a new controller(2500) to the WCS.
 
-My WCS version 6.0.196.0
-My WLC version 7.0.116.0
 
If i upgrade my WCS i may add the new contoller? Even if in cisco DATA-SHEET there isnt any mention regarding this WLC(basicly it says that the WCS does not support this WLC)
 
Monitoring and migration of selected Cisco Aironet standalone   (autonomous) access points. Monitoring of the standalone access points of   Cisco 800, 1800, 2800, and 3800 Series Integrated Services Routers.

View 3 Replies View Related

Cisco Wireless :: WLC 2500 With AD Integration

Jan 3, 2012

I have a scenario where we have
 
Cisco 1300 Outdoor APs
Cisco 3600 Indoor APs
WLC 2500
 
Now i need to integrate the WLC with Windows 2008 AD for authentication.The idea is to let the users authenticate via AD for accesing the wireless network.
 
Will the integration work with NPS?

View 2 Replies View Related

Cisco Wireless :: 2500 - LAP Management

Feb 15, 2012

I'm configuring a 2500 series WLC to test some wireless configuration changes we'd like to make on our 5500's that are currently in prodcution.
 
The 2500 and the 5800's interfaces are configured as a LAG.
 
One of the primary goals of these configuration changes is to move the LAPs from their current VLAN (the same subnet as our primary WLAN) to two separate VLANs.  Were choosing to move the LAPs to 2 APs based on the WLC best practices document's suggestion to limit the number of LAPs per vlan to 60-100. We've had several issues in the past with LAPs failing to join with their static IPs, releasing them and then joining with DHCP addresses.
 
LAP's will be on separate vlans using subnets 10.10.10.0/25 and 10.10.10.128/25.  WLC management interface is in the 10.10.1.0/25 subnet.
 
Should we continue using static IPs for the LAPs or DHCP?
 
What subnet should the AP management interface be on?
 
Is it possible to have mutiple AP management interfaces with LAG?

View 4 Replies View Related

Cisco Wireless :: HA Support On 2500 Controller

May 10, 2013

By any way can I achieve HA  in 2500 controller? I dont mind even I didnt get Stateful switchover.

View 5 Replies View Related

Cisco :: 2500 How To Secure Wireless Network

Aug 2, 2011

We are looking at MAC address filter on the WCS (Limted to 2500?) for the machine then a rule on the ACS pointing to an AD group.

View 1 Replies View Related

Cisco :: Wireless Controller With Web Authentication 2500

Dec 7, 2012

i am having wirless controller cisco 2500 series. i want to know how many web authentication users i can create in the 2500 series controller with time out option for each users.
 
i know it will support the web authentication for internet access for the users but i need to know how many it will accept at a time with hours specification.

View 4 Replies View Related

Cisco :: LMS Support For 2500 Wireless Controller?

Nov 27, 2011

know if Cisco LMS will ever support the 2500 wireless controller ? I have just checked the supported devices for LMS 4.1 and the controller is not there.

View 1 Replies View Related

Cisco Wireless :: 2500 - Compatibility Matrix

Apr 3, 2012

I have some concern regarding the compatibility of AP with the WLC. we are using AIR-CT2504(7.0.116.0) series WLC with AP AIR-LAP1242AG(7.0.116.0) but now i checked on Cisco website they are End-of-Sale/End-of-Life for the Power Supply for Cisco Aironet 1130, 1140, 1240 and 1300 Series Access Point.
 
Now My question is:
1: Which is the latest AP series we should use for WLC 2500 series?
 

View 4 Replies View Related

Cisco Wireless :: WLC 2500 Client Limit?

Apr 18, 2012

Im making a design for a customer that will have around 200 wireless users.
 
We were thinking in the WLC 2500, because the number of APs will be around 30.
 
But the problem is that from time to time, the client organizes events, and in these events the number of wireless clients will be around 600.
 
In the WLC2500 specs te maximun numbers of users is 500, but i want to know if this is just a recomendation, of if the WLC will drop the connection attemp # 501.

View 3 Replies View Related

Cisco Wireless :: MIBs For 2500 Series WLC

Apr 25, 2012

I need the MIBs for Cisco 2500 WLC. I have it for 5508 WLC. Does it works same for 2500 WLC too ?

View 1 Replies View Related

Cisco Wireless :: Use 5500 And 2500 WLC As Failover?

Mar 4, 2012

The 5500 WLC would be the primary and 2500 WLC would be the secondary. The only need for the secondary would be in the event of failure of the primary, and support needs when doing maintenance such as code upgrades.
 
We would use the same version of code on each controller and apply the necessary amount of AP licenses on each. The controllers would have identical configurations and host multiple SSID's, including offering guest services. Does the 2500 support guest network services?

View 4 Replies View Related

Cisco Wireless :: 2500 Series Machine Authentication With IAS

Jun 2, 2013

I have the problem with machine authentication, our customer using Wireless Controller 2500 Series and need implement machine authentication on IAS server. So, as my understand is our controller may not change anything with configuration but we may configure IAS for support machine authentication, correct? but my question is how to? and is it work ?

View 24 Replies View Related

Cisco Wireless :: 2500 As Anchor / Compatibility And Limitations?

Jan 29, 2013

with FW 7.4.100.0 a 2500 controller works as anchor controller, now.I have 3 questions.
 
1) What are the limitations? 15 EoIP tunnel, Clients? something else?
 
2) Have Cisco a compatibility matrix about Anchor - Foreign Firmware? (Example works 7.4.100.0 anchor with 7.0.x.x foreign?)
 
3) A controller works only as anchor. A controller version with lowest AP licence is needed. Right?

View 3 Replies View Related

Cisco Wireless :: CAP1602I-E-K9 Can't Register With 2500 Controller

May 18, 2013

I am developing CAP1602I & 2500 Controller.The CAP1602I-E-K9 can't register with the 2500 controller. [code] logging appears: capwap can't process uncryped data..I even didn't configure capwap on CAP1602.May I know if CAP1602 doesn't support LWAPP? Why LWAPP doesn't work?According to the logging, I also tried to configure the "Data Encryption" on 2500 controller ( according to 7.0.116.0 guide)
 
"Cisco 2500, WiSM2, WLC2—By default, these platforms do not contain DTLS. To turn on data DTLS, you must install a license. These platforms have a single image with data DTLS turned off. To use data DTLS you will need to have a license."Note  If your controller does not have a data DTLS license and if the access point associated with the controller has DTLS enabled, the data path will be unencrypted. I should purchase a license?  or,  if I can configure  the CAP1602I to don't encrypt data?

View 10 Replies View Related

Cisco Wireless :: How To Configure WLC 2500 With Authentication 802.1x EAP TTLS

Mar 14, 2013

My client wants to test their new product with wireless authentication 802.1x EAP TTLS. They have CISCO WLC 2504. Does CISCO WLC 2500 support EAP TTLS, if yes then how to configure. So far I have added Radius TTLS server into my WLC.  Under Radius on WLC added radius server IP and key and created new SSID 802.1x WPA+WPA2 ( WPA policy2 and WPA encryption AES) after that under SSID AAAservers selected drop down same server IP. But user tried and didn’t work also we didn’t see any hit on radius server. Yea policy has added on radius. My client wants to use TTLS instead of TLS because in TLS you have to use client certificate on client side but on TTLS you can use certificate on client side but it is optional. So they want to stick with TTLS. But I am not seeing any documentation on TTLS with cisco WLC

View 8 Replies View Related

Cisco Wireless :: 2500 WLC Ports Auto Negotiate?

Apr 1, 2012

I see the 2500 porst are 1 Gigabit ports. Are they 10/100/1000 ports though?Have an older switch that only has 10/100 ports.

View 2 Replies View Related

Cisco Wireless :: WLC 2500 Authentication Using Multiple AS Domains?

Mar 13, 2012

The  users belong to Multiple AD domains. If we purchase WLC 2500 controller. Can I  have one more WLANs authenticate to multiple radius or ad domains? I thought one WLAN/ ssid authenticate to single radius server.

View 4 Replies View Related

Cisco :: 2500 Wireless Controller Blocking Traffic

May 16, 2012

I have a Cisco 2500 Wireless Controller connected and controlling 5 Cisco AP's.  Everything works fine except one device.
 
This device is used to connect to our AP wirelessly and then any of the wireless laptops can use programming software to connect to the device and program through it.  I can successfully set up our device on the network and all PCs can ping it, but the programming software refuses to connect to it.  I spent an hour and a half on the phone with the device people who assure me its the network.  So, I bought in a cheap Linksys router, hooked one laptop up to it and configured the device wirelessly.  With that, the programming software works.

what should I be looking for in the Wireless Controller that may be blocking direct connection to the device even though I can ping it?

View 10 Replies View Related

Cisco Wireless :: 2500 Series WLC Crashed Repeatedly

Aug 11, 2012

I have 2500 series wlc which is crashing again and again. I attach the log of crash as well.Also in License location the base-ap-count license " is not in use ".

View 3 Replies View Related

Cisco Wireless :: Access Points Which Are Not Registering With WLC 2500

May 1, 2013

We have a couple of Access Points which are not registering with WLC 2500. I followed-up on the two LAPs in the dorm.  They were cycling through red, amber, green, indicating they were trying to join the controller but could not.
 
Recently, we have changed our IP Schema for the Wireless Devices and I believe there is an IP Conflict between APs and WLC. Earlier APs were cofigured with Static IP Address assignment, thus they can't change their IP Address.
 
how to reset the Access Point? I know we can hard reset them by pressing the Mode button manually.
 
Is there another way via which this can be done witout removing the Access Points from their enclosures?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved