Cisco Wireless :: MIBs For 2500 Series WLC

Apr 25, 2012

I need the MIBs for Cisco 2500 WLC. I have it for 5508 WLC. Does it works same for 2500 WLC too ?

View 1 Replies


ADVERTISEMENT

Cisco :: Does WLC 2500 Series Supports 1262 Series Access Point

Jun 14, 2011

Does AIR-CT2504-25-K9 spupports AIR-LAP1262N-E-K9  Access Point? How can I check this?

View 1 Replies View Related

Cisco Wireless :: 2500 Series Machine Authentication With IAS

Jun 2, 2013

I have the problem with machine authentication, our customer using Wireless Controller 2500 Series and need implement machine authentication on IAS server. So, as my understand is our controller may not change anything with configuration but we may configure IAS for support machine authentication, correct? but my question is how to? and is it work ?

View 24 Replies View Related

Cisco Wireless :: 2500 Series WLC Crashed Repeatedly

Aug 11, 2012

I have 2500 series wlc which is crashing again and again. I attach the log of crash as well.Also in License location the base-ap-count license " is not in use ".

View 3 Replies View Related

Cisco Wireless :: 2500 Series Support Mobility Groups?

Dec 1, 2011

Do you know if the new 2500 series controller supports things like mobility groups? Could I use 2 of these and do inter-controller roaming. Also do you know if this would work with a 2106 controller and a 2505 controller or are they 2 completely independent controllers only knowing about their own APs??

View 12 Replies View Related

Cisco :: Unable To Download 2500 Series Wireless Controllers

Mar 19, 2013

I want to download the Cisco 2500 Series Wireless Controllers Release 7.3 Software AIR-CT2500-K9-7-3-112-0.aes.I have CON-SMB for it, when I try to download it I am not to download it. I have mentioned the message given by Cisco" The category for this contract does not include the feature or the benefit for software download that you are requesting at the moment, this means that even if the contract is a support assistant (8X5XNBD) does not support the the mentioned feature for you to update the device you need, please refer to your partner directly to be able to acquired a Cisco Service Contract that supports and include the software download feature to be able to upgrade and update your device as you need."Is there any seprate contract for downloading the Software.

View 2 Replies View Related

Cisco Wireless :: Does 2500 Series Controllers Support Redundancy

Apr 12, 2012

Does 2500 series wireless controllers support redundancy?

View 1 Replies View Related

Cisco Wireless :: 2500 WLAN Controller Series Compatible With LAP1131AG?

Apr 17, 2012

I have a customer whom has six LAP1131AG-K9 but no controller and they are interested in one of the new 2500 series, specifically a AIR-CT2504-5-K9 with a 5 AP add-on license to bring total AP capacity to 10.  I can't determine clearly if this controller will work for these older AP's prior to them making the jump to 802.11n via the 3500 or 3600 series, looking to the community to confirm.

View 3 Replies View Related

Cisco Wireless :: WLC 2500 Series Setup With Windows Server 2008 R2

May 15, 2011

I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.I got 2500 WLC with POE switch and 4 aironet AS 1142.

View 16 Replies View Related

Cisco Wireless :: WLC 2500 Series Setup With Windows Server 2008 R2

Jun 27, 2012

I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.
 
I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.
 
In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.
 
I got 2500 WLC with POE switch and 4 aironet AS 1142.

View 4 Replies View Related

Cisco Wireless :: Training On 2500 Series Controller And 1142 / 1040 AP

Apr 21, 2013

Looking for some training on the 2500 series controller and 1142 or 1040 AP's preferably.

View 10 Replies View Related

Cisco :: WLC 2500 Series / Differences Between 7.0 And 7.2 Firmware?

Mar 28, 2012

which differences exist between 7.0 and 7.2 firmwares? I have to decide/choose which of them to run, before continuing to configure my WLAN infrastructure.

View 3 Replies View Related

Cisco :: WLC 2500 Series URL Filtering And Hotspot?

Oct 2, 2012

I have Cisco Wireless Controller 2500 series (AIR-CT2504) and 10 LAPs implemented in my office building. I need to enforce security policy.
 
I have few questions below regarding the Wireless controller 2500 Series.
 
1)  Can i enforce Internet security policy such that all prohibitive sites remain block from the WLC?
 
2)  Is it possible to allow Internet access to only designated machines/users ?
 
3) Initial logon page for user /machine authentication to get access to wi-fi ?

View 1 Replies View Related

Cisco :: Line Usage In Case Of Show Line On 2500 Series?

Oct 10, 2012

Cisco 2500 series access servers show line usage with the "show line" command:

View 2 Replies View Related

Cisco Switching/Routing :: Router Boots Into Router With 2500 Series

Jul 27, 2009

I m having 2500 series router. when i boot router automatically get into router(boot)> . how to solve?

View 6 Replies View Related

Cisco :: 4503 - MIBs V1 And V2

Oct 4, 2012

I have a doubt regarding MIBs. I dowloads the MIBs for Cisco 4503 for a specific IOS. But the folder is divided by v1 and v2.
 
What does it mean v1 and v2? The version of SNMP?
 
So if I enable just SNMP Trap (''snmp-server enable traps.....'') I should use MIBs v1 but if I enable also the number of Retries and Timeout ( ''snmp-server inform retries...'' and ''snmp-server inform timeout...'') I sould use MIBs v2.

View 2 Replies View Related

Cisco :: Load Mibs Compatible With ASA 5505

Feb 29, 2012

I'm running HP nnm9i and want to load mibs that are compatible with the cisco ASA 5505, 10 and 20 series. From where I can download these mibs.

View 2 Replies View Related

Cisco Switches :: Track Down SNMP MIBs For Linksys By SRW2048

Oct 25, 2011

I am trying to track down the SNMP MIBs for the Linksys by Cisco SRW2048. Please note that this is the model before the complete CISCO rebrand of the product. I have SNMP walked, browsed etc etc and I just can't pull CPU and RAM usage. Any working view of those two stats? I'm using OpManager by ManageEngine as my NPM platform.

View 1 Replies View Related

Cisco :: How To Find Useful MIBs For Cat 6500 / ASA5540 / Cat 3750-E Devices

Jan 10, 2013

i am setting up a new Monitoring System (CA Netvoyant). It has some default Cisco monitoring capabilities ( I believe these are soem standard MIBs).  I am wondering how can I add more useful Cisco MIBs for the devices I have in my network. There are thousands of MIBs and it looks like it is not easy at all to find the useful ones.For example the MIBs that can give you Emergency and up to warning level information, cpu, memory, interface errors, module failures (in case of Cat 6500), FWSM, BGP, VPN tunnel status notifications. Is there a list of useful MIBs for each device type, like Cat 6500, ASA5540, Cat 3750-E etc depending on IOS Image?  setting up the SNMP monitoring system?

View 1 Replies View Related

Cisco :: 6500 - MIBS To Monitor EtherChannel And Trunks Via SNMP

Feb 19, 2009

I would like to monitor the status of ether channel and trunk configurations in 6500 Catalyst switches running both CATOS and IOS.  I would like to understand the specific mibs /OIDS that should be monitored for ether channels and trunks.  I am trying to get a better handle on tracking the ether channels and trunk dynamically and then understanding when the ports are having issues (up/down and errors).  I need to understand how to differentiate these type of ports from regular access ports.

View 4 Replies View Related

Cisco Wireless :: Controller 4400 Series Work With Aironet 3600 Series

Mar 6, 2012

Can Controller 4400 series work with Aironet 3600 series?

View 5 Replies View Related

Cisco Wireless :: 1140 AP Series Vs 1260 AP Series Technical Differences

Jul 24, 2012

What's the main technical differences among the 1140 AP series and the 1260 AP series?I know that the 1260 supports external antennas while the 1140 supports internal antennas, but apart from that, is there any other important difference ?

View 10 Replies View Related

Cisco Wireless :: 2500 WCS Can't Add Controller

Nov 20, 2011

I am having trouble adding a new controller(2500) to the WCS.
 
-My WCS version 6.0.196.0
-My WLC version 7.0.116.0
 
If i upgrade my WCS i may add the new contoller? Even if in cisco DATA-SHEET there isnt any mention regarding this WLC(basicly it says that the WCS does not support this WLC)
 
Monitoring and migration of selected Cisco Aironet standalone   (autonomous) access points. Monitoring of the standalone access points of   Cisco 800, 1800, 2800, and 3800 Series Integrated Services Routers.

View 3 Replies View Related

Cisco Wireless :: WLC 2500 With AD Integration

Jan 3, 2012

I have a scenario where we have
 
Cisco 1300 Outdoor APs
Cisco 3600 Indoor APs
WLC 2500
 
Now i need to integrate the WLC with Windows 2008 AD for authentication.The idea is to let the users authenticate via AD for accesing the wireless network.
 
Will the integration work with NPS?

View 2 Replies View Related

Cisco Wireless :: 2500 - LAP Management

Feb 15, 2012

I'm configuring a 2500 series WLC to test some wireless configuration changes we'd like to make on our 5500's that are currently in prodcution.
 
The 2500 and the 5800's interfaces are configured as a LAG.
 
One of the primary goals of these configuration changes is to move the LAPs from their current VLAN (the same subnet as our primary WLAN) to two separate VLANs.  Were choosing to move the LAPs to 2 APs based on the WLC best practices document's suggestion to limit the number of LAPs per vlan to 60-100. We've had several issues in the past with LAPs failing to join with their static IPs, releasing them and then joining with DHCP addresses.
 
LAP's will be on separate vlans using subnets 10.10.10.0/25 and 10.10.10.128/25.  WLC management interface is in the 10.10.1.0/25 subnet.
 
Should we continue using static IPs for the LAPs or DHCP?
 
What subnet should the AP management interface be on?
 
Is it possible to have mutiple AP management interfaces with LAG?

View 4 Replies View Related

Cisco Wireless :: HA Support On 2500 Controller

May 10, 2013

By any way can I achieve HA  in 2500 controller? I dont mind even I didnt get Stateful switchover.

View 5 Replies View Related

Cisco :: 2500 How To Secure Wireless Network

Aug 2, 2011

We are looking at MAC address filter on the WCS (Limted to 2500?) for the machine then a rule on the ACS pointing to an AD group.

View 1 Replies View Related

Cisco :: Wireless Controller With Web Authentication 2500

Dec 7, 2012

i am having wirless controller cisco 2500 series. i want to know how many web authentication users i can create in the 2500 series controller with time out option for each users.
 
i know it will support the web authentication for internet access for the users but i need to know how many it will accept at a time with hours specification.

View 4 Replies View Related

Cisco :: LMS Support For 2500 Wireless Controller?

Nov 27, 2011

know if Cisco LMS will ever support the 2500 wireless controller ? I have just checked the supported devices for LMS 4.1 and the controller is not there.

View 1 Replies View Related

Cisco Wireless :: 2500 - Compatibility Matrix

Apr 3, 2012

I have some concern regarding the compatibility of AP with the WLC. we are using AIR-CT2504(7.0.116.0) series WLC with AP AIR-LAP1242AG(7.0.116.0) but now i checked on Cisco website they are End-of-Sale/End-of-Life for the Power Supply for Cisco Aironet 1130, 1140, 1240 and 1300 Series Access Point.
 
Now My question is:
1: Which is the latest AP series we should use for WLC 2500 series?
 

View 4 Replies View Related

Cisco Wireless :: WLC 2500 Client Limit?

Apr 18, 2012

Im making a design for a customer that will have around 200 wireless users.
 
We were thinking in the WLC 2500, because the number of APs will be around 30.
 
But the problem is that from time to time, the client organizes events, and in these events the number of wireless clients will be around 600.
 
In the WLC2500 specs te maximun numbers of users is 500, but i want to know if this is just a recomendation, of if the WLC will drop the connection attemp # 501.

View 3 Replies View Related

Cisco Wireless :: Use 5500 And 2500 WLC As Failover?

Mar 4, 2012

The 5500 WLC would be the primary and 2500 WLC would be the secondary. The only need for the secondary would be in the event of failure of the primary, and support needs when doing maintenance such as code upgrades.
 
We would use the same version of code on each controller and apply the necessary amount of AP licenses on each. The controllers would have identical configurations and host multiple SSID's, including offering guest services. Does the 2500 support guest network services?

View 4 Replies View Related

Linksys Wireless Router :: Cannot Set Up 2500

Jan 31, 2013

Cannot set up 2500 router

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved