Cisco :: 6500 - MIBS To Monitor EtherChannel And Trunks Via SNMP
Feb 19, 2009
I would like to monitor the status of ether channel and trunk configurations in 6500 Catalyst switches running both CATOS and IOS. I would like to understand the specific mibs /OIDS that should be monitored for ether channels and trunks. I am trying to get a better handle on tracking the ether channels and trunk dynamically and then understanding when the ports are having issues (up/down and errors). I need to understand how to differentiate these type of ports from regular access ports.
View 4 Replies
ADVERTISEMENT
Oct 25, 2011
I am trying to track down the SNMP MIBs for the Linksys by Cisco SRW2048. Please note that this is the model before the complete CISCO rebrand of the product. I have SNMP walked, browsed etc etc and I just can't pull CPU and RAM usage. Any working view of those two stats? I'm using OpManager by ManageEngine as my NPM platform.
View 1 Replies
View Related
Jun 20, 2012
I'm configuring two etherchannel groups (2 ports in each) on a 3560 switch. I need to trunk multiple vlans over each channel group.
I created the vlan trunks and allowed vlans on each physical interface. I notice that I can also configure the vlan trunks on the port-channel interfaces that were created. Should I configure them under those interfaces, or leave them on the physical interfaces? Relevant config is below:
interface Port-channel1
!
interface Port-channel2
[Code].....
View 1 Replies
View Related
Jan 10, 2013
i am setting up a new Monitoring System (CA Netvoyant). It has some default Cisco monitoring capabilities ( I believe these are soem standard MIBs). I am wondering how can I add more useful Cisco MIBs for the devices I have in my network. There are thousands of MIBs and it looks like it is not easy at all to find the useful ones.For example the MIBs that can give you Emergency and up to warning level information, cpu, memory, interface errors, module failures (in case of Cat 6500), FWSM, BGP, VPN tunnel status notifications. Is there a list of useful MIBs for each device type, like Cat 6500, ASA5540, Cat 3750-E etc depending on IOS Image? setting up the SNMP monitoring system?
View 1 Replies
View Related
Sep 26, 2012
on 7600 SUP720 3B.I have port channel and there are two ports on that port channel. is it possible to apply this command? does it work?
View 1 Replies
View Related
Apr 4, 2012
Is is possible to monitor bandwidth utilization of a PAT on an ASA? We're running version 8.2.
View 1 Replies
View Related
Oct 29, 2012
I have 2x6500s series catalyst core switch. i configurated vss. all them are working normal. but i have one problem. some of my servers link is down sometimes. I configurated server links as etherchannel.at etherchannel not both of links down only one link down.this modules i used to connect servers to core switch. modules 3 and 7 slot.
View 7 Replies
View Related
Apr 9, 2013
Monitoring H.323? I've got a 3925 running15.1(3)T with 9 PRI's. Because of our volume, syslogging is not the desired solution. We want something that we can potentially graph over an 8 hour period, so while the RTMT is accurate, either it won't store the data for 8 hours, or we aren't using it correctly (plus, mgmt may want access to the stats/graphs, and we're not keen on granting them access). So far, we've used: [code] None of these seem to accurately portray utilization. cdsp Active Channels seems to get the closest, so perhaps I have to tweak it a little bit, but so far, nothing accurate.
View 3 Replies
View Related
Mar 10, 2007
I have several cisco 3620 being used for PPPoE connections. I want to generate MRTG of the connections. Would anyone have the snmp OID to monitor the number of users?
View 11 Replies
View Related
Oct 10, 2011
Any OID to determine the number of registered AP's on a WLC (specifically the AIR-CT2504).
I've got both of the Airespace MIBs and have browsed through them but I can't seem to find the correct location. I can find a list of all of the AP's registered but our monitoring software doesn't have the ability to 'count' that index. As such, I'm looking for a count/summation of the total number of registered AP's via SNMP.
View 1 Replies
View Related
Jul 28, 2011
i have 3560 switch located in warehouse environments . i need to monitor the temperate of this switch . i am looking for OID value that serves this purpose .
kindly provide me how to look for all OID that give me real time status for FAN .. CPU UTILIZATION ...TEMPERATURE ...OR ANY MAJOR EVENT THAT CAN DISRUPT MY PRODUCT IN .
View 3 Replies
View Related
Jan 31, 2013
I am trying to review the port-channel configuration on a 6500 series. I am issuing the "show etherchannel summary" command and the out put shows the Group, Port-Channel, and Ports. It does not show me the protocol that is in use such as PAgP or LACP. Does this have to do with the Etherchannel in the "On" mode rather than "active", or "Auto"?
View 2 Replies
View Related
Dec 22, 2008
I matched the traffic statistics on one of my Cisco ASA site-site tunnels with the OID:1.3.6.1.4.1.9.9.171.1.4.3.1.1.25.4142 (cipSecTunHistInOctets). I was real proud of myself for a few days until I checked the history and found the OID wasnt working.After some troubleshooting I found that the last four digits (4142 in this case) change whenever the tunnel drops and re-establishes itself. Any way to collect tunnel utilization history on an ASA with SNMP? Is there a different OID I can use thats based on the endpoint IP?
View 2 Replies
View Related
Apr 25, 2010
We are currently monitoring approximately 50 locations each having one or more cisco devices, Catalyst 3750 and 3560.Locations are connected via CWDM.We would like to monitor interface errors, signal loss and power on CWDM SFP transceivers on Catalyst 3560 and Catalyst 3750 switches. We tried to get these values (as shown using „sh interface transceiver“ command) using SNMP but we didn't get any SNMP result. What MIB or other functions/ modules/ features need to be used/activated on switch?Do we need any additional piece of hardware?
View 25 Replies
View Related
Sep 26, 2011
what is the OID for See the hit status of the spefic VIP and RIP coming under the VIP .apeart from this CSS box having any module to moniter the hit status or VIP's and RIP's
View 2 Replies
View Related
Aug 15, 2012
May I know how to monitor temperature status of below device by SNMP.How to find the exact oid of those devices? I can only find the mib file of Nexus 5000 at url...Cisco Nexus 5010PCisco UCS 6120XP Cisco ASR 1002F
View 1 Replies
View Related
Mar 27, 2012
I have 2 6504's running HSRP as my core. They are each etherchannel'd to my Datacenter switch (3750 Stack) -- see image below.The problem i a having is with the etherchannel status:
Core1 PO11 status w (waiting)
Core2 PO11 status P(bundled)
DC11 PO48 status P -- but only to Core2 - the interfaces to Core1 are suspended. (See attached configuration documents) None of the devices have any information in the logs. I run this same configuration in my central location, but we are running Nexus 7000's. With the 6500's, do I need to split the port channels on the 3750 to allow them to negotiate the etherchannel? If I split the portchannels, are there any concerns? Should I expect to see the etherchannel status as P (Bundled) or H (Hot-Standby)?
View 2 Replies
View Related
Sep 26, 2012
I came across this Multichassis EtherChannel Features when read about information from Cisco Smart Business Architecture.After checking further, knowing that Cataly stwitch 6500 supports this feature.provide information that beside Catalyst 6500, is there any other model of Catalyst switch can support this feature?
View 4 Replies
View Related
Jun 29, 2011
A customer observes SNMP timeout problems on a Cat6500 with IOS 12.2(33)SXI. As a result every 2 days (more or less) all interfaces are marked DOWN and a couple of minutes later all interface are up again - but in fact there is no interruption, it is just the snmp request getting a time out. the customer does not have problems with IOS 12.2(18)SXF14.
In the Bug Details the "Known affected versions" lists the following beside others:
12.2(33)SXI
12.2(33)SXI1
12.2(33)SXI2
[code]...
Now I am confused; both IOS versions are listed as affected (12.2(33)SXI and 12.2(18)SXF14) but the customer does have problems only with one version. Is the customer hitting this bug or is it another one ?
He upgraded 2 Cat65xx on which he observed the problem to IOS 12.2(33)SXI6 and the problem is gone; is this just a coincidence or is CSCed52841 really fixed in 12.2(33)SXI6. This version is not listed as affected but on the other hand, "Fixed-In" lists only these 3:
12.1(22.3)E1
12.2(17d)SXB5
12.2(18)SXD
Before going to upgrade around 50 Core / Distribution switches the customer wants to be sure with the IOS version. Tracing the issue is not that easy because the failure occurs only from time to time.
View 6 Replies
View Related
Nov 5, 2011
I'm running 12.2(33)SXJ1 on a 6500 with several IPv6 BGP peers. Is there any way to monitor the BGP status of IPv6 peers? I've been through the BGP4 mib and cant seem find a way to check the status of IPv6 peers.
View 4 Replies
View Related
Mar 6, 2013
I tried to clear monitor session on 6500 and keep on getting the following error:
%Another session parameters or permit-list is being configured %Please wait for another configuration to complete.
how i can go about clearing the monitor session.
View 9 Replies
View Related
Nov 21, 2011
I tried to clear monitor session on 6500 and keep on getting the following error:
%Another session parameters or permit-list is being configured %Please wait for another configuration to complete.
how i can go about clearing the monitor session.
View 1 Replies
View Related
Apr 12, 2012
Is it possible to modify conf with snmp on ace module like others 6500 catalyst ?Is ace answer to snmpset cmds ?
View 1 Replies
View Related
May 23, 2011
I have a question about SNMP OIDs for the command "show counters interface intx/y delta" on Catalyst6500. The customer wants to create graphs for the following values:Overruns, qos0Outlost, InErrors, OutErrors, InDiscards, OutDiscards etc..Is possible to get these values using SNMP?
View 3 Replies
View Related
Oct 4, 2012
I have a doubt regarding MIBs. I dowloads the MIBs for Cisco 4503 for a specific IOS. But the folder is divided by v1 and v2.
What does it mean v1 and v2? The version of SNMP?
So if I enable just SNMP Trap (''snmp-server enable traps.....'') I should use MIBs v1 but if I enable also the number of Retries and Timeout ( ''snmp-server inform retries...'' and ''snmp-server inform timeout...'') I sould use MIBs v2.
View 2 Replies
View Related
Feb 29, 2012
I'm running HP nnm9i and want to load mibs that are compatible with the cisco ASA 5505, 10 and 20 series. From where I can download these mibs.
View 2 Replies
View Related
Apr 25, 2012
I need the MIBs for Cisco 2500 WLC. I have it for 5508 WLC. Does it works same for 2500 WLC too ?
View 1 Replies
View Related
Oct 25, 2012
Let's say I have a Brocade switch, and a Cisco switch, and I've formed a VLAN trunk between the two.On the Cisco switch, I configure the trunk to utilize VLAN 3 for its native VLAN.On the Brocade switch, I utilized the command 'default-vlan-id 2'. I have configured the port going to the Cisco switch in dual mode.From my understanding, when a port is placed in dual mode, it sends frames that are untagged as the default vlan. Does this cause a native VLAN mismatch?
View 19 Replies
View Related
Sep 24, 2012
Had a question regarding creating dial peers through sip trunks. It will be through verizon fios so it'll be terminated through the fa0/0 port. I know to the provider i'll implement something along the lines of this:dial-peer voice 1 voipsession target ipv4:1.2.4.4sipv2port fa0/0Many of the documentation I came across really only shows pots dial-peers will a voip dial-peer work the same? Something a long of the lines of this:dial-peer voice 2 voipdesination-pattern 91[2-9]..[2-]...... no digit-stripport fa0/0
View 9 Replies
View Related
Feb 5, 2012
I need to adapt a Cisco Catalyst switch configuration into a new ASR9000 router and I do not know how to configure trunks and access ports on an ASR9K router.
This is the configuration of the catalyst switch I want to replace.
interface GigabitEthernet1/0/1
description Access-Port -> SERVER
switchport access vlan 5
spanning-tree portfast
!
[code]....
Am I right? Or do I need to use the command “rewrite ingress tag pop 1 symmetric”on any of the interfaces o subinterfaces? Do I have to configure the command “encapsulation dot1q untagged“ on the GigabitEthernet0/0/0/0.5 subinterface?
View 5 Replies
View Related
Dec 16, 2011
I'm building this network and I stumbled upon a problem that I don't understand. Here is how my config looks:
PC -----------vlan5-------Cisco 3560----trunk3-5----Cisco AP1420
Vmware guest
Configuration of 3560:
interface Vlan3
description ID-180, wifi1
ip address x.x.x.x 255.255.255.224
ip access-group 115 in
[code] .......
Configuration of WIFI AP:
interface FastEthernet0
no ip address
no ip route-cache
[code]....
PC and vm ware are plugged in port 5 and 6, wifi in port 7. There if no V LAN ID set on the PC, but there is V LAN ID set on the VM ware esx interface. If I try to ping WIFI from PC or esx, ping doesn't get through. If I plug WIFI to port 5 or 6, I get access it.
View 19 Replies
View Related
Apr 18, 2013
R11 is acting as host for testing purposes (pinging the DG's, and the ISP interfaces -> which are the lo0 address on the routers.I also have another question: How would I go about providing redundancy on the trunks from the Switch to the router?
View 2 Replies
View Related
Nov 7, 2011
I am beginning to implement OSPF into the network I work on. I have a network which consists of multiple 4500, 6500 series routers and 3560s. Each switch has its own set of VLANs. In other words VLAN X on one switch is not the same as VLAN X on another switch. I had envisioned connecting each switch via trunk links and then routing via the loopback addresses on each device. That didn't work. Then I created a VLAN 100 on each switch. Each one was configured with an IP in the same subnet range (10.3.0.1 and 10.3.0.2). I added these addresses to the OSPF process in area 0. It worked. However, this is not desired. I have not seen many examples of 4500 layer 3 switches configured with OSPF. The examples I have seen show the interfaces configured with IPs.
View 3 Replies
View Related
