Cisco Wireless :: Training On 2500 Series Controller And 1142 / 1040 AP
Apr 21, 2013Looking for some training on the 2500 series controller and 1142 or 1040 AP's preferably.
View 10 Replies
ADVERTISEMENT
Cisco Wireless :: 2500 WLAN Controller Series Compatible With LAP1131AG?
Apr 17, 2012I have a customer whom has six LAP1131AG-K9 but no controller and they are interested in one of the new 2500 series, specifically a AIR-CT2504-5-K9 with a 5 AP add-on license to bring total AP capacity to 10. I can't determine clearly if this controller will work for these older AP's prior to them making the jump to 802.11n via the 3500 or 3600 series, looking to the community to confirm.
View 3 Replies View RelatedCisco WAN :: 2951 / Error / DDR Controller 1 Data Training Time Out During Initialization
Aug 8, 2011I have a cisco router 2951 and this is the message that apear on the console:
ERROR: DDR controller 1 data training time out during initialization! Stop.
What does it mean?
Cisco :: Does WLC 2500 Series Supports 1262 Series Access Point
Jun 14, 2011Does AIR-CT2504-25-K9 spupports AIR-LAP1262N-E-K9 Access Point? How can I check this?
View 1 Replies View RelatedCisco Wireless :: MIBs For 2500 Series WLC
Apr 25, 2012I need the MIBs for Cisco 2500 WLC. I have it for 5508 WLC. Does it works same for 2500 WLC too ?
View 1 Replies View RelatedCisco Wireless :: Controller 4400 Series Work With Aironet 3600 Series
Mar 6, 2012Can Controller 4400 series work with Aironet 3600 series?
View 5 Replies View RelatedCisco :: 2500 / 1142 Access Points Reboot Or Lose Power
Jun 9, 2013Have a Cisco 2500 WLAN with Cisco 1142 Lightweight Access Points.IOS: WLC & AP IOS is 7.4.100.0
Seems to be when the APS reboot or lose power we cannot issue command to bring the APs back up from the WLAN- we have to log onto each AP via a console cable and bring the interfaces up.
Cisco Wireless :: 2500 Series Machine Authentication With IAS
Jun 2, 2013I have the problem with machine authentication, our customer using Wireless Controller 2500 Series and need implement machine authentication on IAS server. So, as my understand is our controller may not change anything with configuration but we may configure IAS for support machine authentication, correct? but my question is how to? and is it work ?
View 24 Replies View RelatedCisco Wireless :: 2500 Series WLC Crashed Repeatedly
Aug 11, 2012I have 2500 series wlc which is crashing again and again. I attach the log of crash as well.Also in License location the base-ap-count license " is not in use ".
View 3 Replies View RelatedCisco Wireless :: 2500 WCS Can't Add Controller
Nov 20, 2011I am having trouble adding a new controller(2500) to the WCS.
-My WCS version 6.0.196.0
-My WLC version 7.0.116.0
If i upgrade my WCS i may add the new contoller? Even if in cisco DATA-SHEET there isnt any mention regarding this WLC(basicly it says that the WCS does not support this WLC)
Monitoring and migration of selected Cisco Aironet standalone (autonomous) access points. Monitoring of the standalone access points of Cisco 800, 1800, 2800, and 3800 Series Integrated Services Routers.
Cisco Wireless :: 2500 Series Support Mobility Groups?
Dec 1, 2011Do you know if the new 2500 series controller supports things like mobility groups? Could I use 2 of these and do inter-controller roaming. Also do you know if this would work with a 2106 controller and a 2505 controller or are they 2 completely independent controllers only knowing about their own APs??
View 12 Replies View RelatedCisco :: Unable To Download 2500 Series Wireless Controllers
Mar 19, 2013I want to download the Cisco 2500 Series Wireless Controllers Release 7.3 Software AIR-CT2500-K9-7-3-112-0.aes.I have CON-SMB for it, when I try to download it I am not to download it. I have mentioned the message given by Cisco" The category for this contract does not include the feature or the benefit for software download that you are requesting at the moment, this means that even if the contract is a support assistant (8X5XNBD) does not support the the mentioned feature for you to update the device you need, please refer to your partner directly to be able to acquired a Cisco Service Contract that supports and include the software download feature to be able to upgrade and update your device as you need."Is there any seprate contract for downloading the Software.
View 2 Replies View RelatedCisco Wireless :: Does 2500 Series Controllers Support Redundancy
Apr 12, 2012Does 2500 series wireless controllers support redundancy?
View 1 Replies View RelatedCisco Wireless :: HA Support On 2500 Controller
May 10, 2013By any way can I achieve HA in 2500 controller? I dont mind even I didnt get Stateful switchover.
View 5 Replies View RelatedCisco :: Wireless Controller With Web Authentication 2500
Dec 7, 2012i am having wirless controller cisco 2500 series. i want to know how many web authentication users i can create in the 2500 series controller with time out option for each users.
i know it will support the web authentication for internet access for the users but i need to know how many it will accept at a time with hours specification.
Cisco :: LMS Support For 2500 Wireless Controller?
Nov 27, 2011know if Cisco LMS will ever support the 2500 wireless controller ? I have just checked the supported devices for LMS 4.1 and the controller is not there.
View 1 Replies View RelatedCisco Wireless :: WLC 2500 Series Setup With Windows Server 2008 R2
May 15, 2011I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.I got 2500 WLC with POE switch and 4 aironet AS 1142.
View 16 Replies View RelatedCisco Wireless :: WLC 2500 Series Setup With Windows Server 2008 R2
Jun 27, 2012I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.
I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.
In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.
I got 2500 WLC with POE switch and 4 aironet AS 1142.
Cisco Wireless :: CAP1602I-E-K9 Can't Register With 2500 Controller
May 18, 2013I am developing CAP1602I & 2500 Controller.The CAP1602I-E-K9 can't register with the 2500 controller. [code] logging appears: capwap can't process uncryped data..I even didn't configure capwap on CAP1602.May I know if CAP1602 doesn't support LWAPP? Why LWAPP doesn't work?According to the logging, I also tried to configure the "Data Encryption" on 2500 controller ( according to 7.0.116.0 guide)
"Cisco 2500, WiSM2, WLC2—By default, these platforms do not contain DTLS. To turn on data DTLS, you must install a license. These platforms have a single image with data DTLS turned off. To use data DTLS you will need to have a license."Note If your controller does not have a data DTLS license and if the access point associated with the controller has DTLS enabled, the data path will be unencrypted. I should purchase a license? or, if I can configure the CAP1602I to don't encrypt data?
Cisco :: 2500 Wireless Controller Blocking Traffic
May 16, 2012I have a Cisco 2500 Wireless Controller connected and controlling 5 Cisco AP's. Everything works fine except one device.
This device is used to connect to our AP wirelessly and then any of the wireless laptops can use programming software to connect to the device and program through it. I can successfully set up our device on the network and all PCs can ping it, but the programming software refuses to connect to it. I spent an hour and a half on the phone with the device people who assure me its the network. So, I bought in a cheap Linksys router, hooked one laptop up to it and configured the device wirelessly. With that, the programming software works.
what should I be looking for in the Wireless Controller that may be blocking direct connection to the device even though I can ping it?
Cisco WAN :: 2500 - Controller Channel / Setting Up Wireless Badges
Feb 14, 2013We are currently using a Cisco 2500 (licensed for 50 AP's) WLAN Controller. There has been a lot of issues setting up the VOCERA wireless badges, thats on going. The question I have is all the AP's are showing as being on Channel 6, it was thought that the controller would learn the enviroment and move these to none overlapping channels, but has not. Is this right should they all be on the same channel and not 1, 6, 11 accordingly? it is also worth mentioning that the controller can see 61 rogue AP's, yes that is 61 other wireless networks!
View 2 Replies View RelatedCisco Wireless :: Comparison Of Features In Wi-Fi LAN Controller 2500 And 4400?
Jul 27, 2011give me the run down on the features removed from the 4400 series in the 2500 series? Obviously 4400 is now EOL, and so i cannot purchase new. Therefore I was looking at the 2500 for my implementation to save costs also.I would like to have two SSID's, running seperate VLAN's, one voice, one guest, trunk the link to the AP's, which will be 1131AG or newer, N possibly. Voice needs to be encrypted with WPA or WPA2, guest needs to be open using the guest access feature. Here's a sample but with EAP:
[URL]
Is this supported to have WPA on one SSID and Guest access on the other? i did spot a paragraph in the 4400 manual stating that certain restrictions apply regarding one SSID having encryption and the other being guest mode?I notice also in the WCS documentation, it doesn't explicitly state it supports the 2500 series under the managed devices section?
Cisco Wireless :: Configuring RADIUS Server On 2500 Controller
Dec 3, 2012We have recently installed Cisco for our wireless solution. We are an education and are looking to let staff and pupils bring their own devices. The route that we are planning to take to let them join the school's WiFi is to implement a RADIUS server so that they can authenticate with their Active Directory username and password. I have tried to test the solution but so far without any success. I am using a Windows Server 2008 R2 as my NPS server, I have setup the Cisco controller as per below:
Security Tab | RADIUS | Authentication - I added my windows server there and the preshared key, the Network User and Management is ticket and the server responds to a ping command,In the WLANs Tab, I selected my test WLAN and under Security | AAA Servers I selected the RADIUS server that I configured in the Security TabI then try to logon to my test WLAN and on the Cisco WLAN controller I get the following error: AAA Authentication Failure for UserName:test User Type: WLAN USER
Before trying to tinker with policies on the Windows Server I was wondering if the RADIUS is correctly setup on the Controller or have I missed something obvious?
Cisco Wireless :: Can Connect Various Aironet 1242 To 2500 Controller
Dec 5, 2012Can I connect various Aironet 1242 to Wireless controller 2500?
View 4 Replies View RelatedCisco :: Missing Access Points On 2500 Wireless Controller?
Jul 9, 2012We have a Cisco 2500 WLC with 136 APs. Recently, we discovered eight APs that were not listed on the Wireless > Access Points > All AP list. These APs were once working and connected, but now they are no longer in the All AP list. I located one of these APs and found the green LED blinking. I power cycled the AP and it came back online with a solid green LED and was then registered on the All AP list. The All AP list will only show the connected APs. I would like to know if there is a method to show the APs that were once connected and are no longer registered so we can better identify when an AP is not working?
View 15 Replies View RelatedCisco Wireless :: AIR-CAP1602I-E-K9 And 2500 Controller / Did Not Get Log Server Settings
Mar 5, 2013I have therefore 2504 Wireless Controller with a wireless access point AIR-CAP1602I-E-K9 (LWAPP image version 7.4.1.37) I saw that I needed to update the Controller in 7.4 for compatibility with my AP. Now when I connect my AP I get error messages:
*Mar 1 00:01:02.387: %CAPWAP-3-ERRORLOG: Did not get log server settings from D
HCP.
*Mar 1 00:01:02.387: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
[Code]....
Cisco Wireless :: 1142 Aironet Won't Join Controller
Aug 6, 2012When I check the AP join statistics I see the following: Reason For Last Unsuccessful Attempt RADIUS authorization is pending for the AP, I don't run a radius server and don't know how to get around this so that the device can join.
View 4 Replies View RelatedCisco Wireless :: 1142 - Network Not Seemed To Find Controller
Apr 18, 2012I've noticed that I've had to prime a lot of the 1142 devices. When attached to the network they not seem to find the controller. The subnet has the scope option and I have other 1142s working but recent ap's seem to not work unless primed.
View 3 Replies View RelatedCisco Wireless :: 1142 AP Will Not Join Controller Through D-Link POE Switch
Apr 1, 2012I'm trying to use 1142 APs with a 2504 Wireless Controller through a D-Link 48PT GBIT XSTACK SWITCH (DLI-DGS-3120-48PC/SI).At any rate, the 1142 AP joins with the wireless controller ONLY when I attach it directly to the controller. When connected directly to the controller the AP functions normally and all is well. When I attach it through the D-Link switch, the AP flashs green several times, indicating that it can't find the controller. I suspect that there's some setting on the D-Link switch that's preventing the AP from seeing the controller.
View 6 Replies View RelatedCisco Wireless :: 2504 Controller With 3 Aironet 1142 Access Points
Mar 16, 2013I have installed/setup a cisco 2504 wireless controller and 3 aironet 1142 access points using the basic config on a windows sbs 2008 domain, the problem is that the clients that are connected to the 2504 aint getting the there ip addr from the AD but from the wireless controller, and there cant reach the clients on wifi from the clients that are connected to lan, is there anyway that i cant change this so that a client on lan can see the client on wlan and vice versa.
View 5 Replies View RelatedCisco :: WLC 2500 Series / Differences Between 7.0 And 7.2 Firmware?
Mar 28, 2012which differences exist between 7.0 and 7.2 firmwares? I have to decide/choose which of them to run, before continuing to configure my WLAN infrastructure.
View 3 Replies View RelatedCisco :: WLC 2500 Series URL Filtering And Hotspot?
Oct 2, 2012I have Cisco Wireless Controller 2500 series (AIR-CT2504) and 10 LAPs implemented in my office building. I need to enforce security policy.
I have few questions below regarding the Wireless controller 2500 Series.
1) Can i enforce Internet security policy such that all prohibitive sites remain block from the WLC?
2) Is it possible to allow Internet access to only designated machines/users ?
3) Initial logon page for user /machine authentication to get access to wi-fi ?
Cisco Wireless :: Wireless Controller 2500 And AIR CAP 3602i K9
Oct 25, 2012when I did connect the AP to the switch and this is already connected to the WLAN 2500, I got this error message [code] And this AP is not joined to the WLAN 2500, but if I use one model of AP like LAP1120 it works, that mean, the wireless is able to see the Ip Address.How can I do to correct the problem with the AP 3600 series?
View 5 Replies View Related
