Cisco Wireless :: Can Connect Various Aironet 1242 To 2500 Controller
Dec 5, 2012Can I connect various Aironet 1242 to Wireless controller 2500?
View 4 Replies
ADVERTISEMENT
Cisco Wireless :: Aironet 1242 - Connect To DSL Using Static Public IP
May 21, 2013I have an aironet 1242, It must be connect to an DSL using a static Public IP, and this AP must provide dhcp services, how to configure this access point in order to be connected to Internet using Public IP and provide dhcp service.
View 4 Replies View RelatedCisco Wireless :: Aironet 1242 G - Disappointing Antenna Signal
Jan 13, 2013I have a Cisco Aironet 1242G and an outdoor omni 12 dbi antenna. I hooked it all up to day (antenna is connected with a 100ft cable). My signal is very disappointing. I have it behind a garage and can only get about maybe 75 foot away and the signal gets very weak.
Is there something that needs to be configured in the aironet? I have enabled external antenna and played with the settings. Is the 12 dbi antenna just too much?
Cisco Wireless :: 1242 Is Not Joining Controller
May 9, 2012i have 1240 series access points which is not joining controller 5500 series. [code]
View 12 Replies View RelatedCisco Wireless :: 2500 WCS Can't Add Controller
Nov 20, 2011I am having trouble adding a new controller(2500) to the WCS.
-My WCS version 6.0.196.0
-My WLC version 7.0.116.0
If i upgrade my WCS i may add the new contoller? Even if in cisco DATA-SHEET there isnt any mention regarding this WLC(basicly it says that the WCS does not support this WLC)
Monitoring and migration of selected Cisco Aironet standalone (autonomous) access points. Monitoring of the standalone access points of Cisco 800, 1800, 2800, and 3800 Series Integrated Services Routers.
Cisco Wireless :: HA Support On 2500 Controller
May 10, 2013By any way can I achieve HA in 2500 controller? I dont mind even I didnt get Stateful switchover.
View 5 Replies View RelatedCisco :: Wireless Controller With Web Authentication 2500
Dec 7, 2012i am having wirless controller cisco 2500 series. i want to know how many web authentication users i can create in the 2500 series controller with time out option for each users.
i know it will support the web authentication for internet access for the users but i need to know how many it will accept at a time with hours specification.
Cisco :: LMS Support For 2500 Wireless Controller?
Nov 27, 2011know if Cisco LMS will ever support the 2500 wireless controller ? I have just checked the supported devices for LMS 4.1 and the controller is not there.
View 1 Replies View RelatedCisco :: Bridge Link With Two Aironet 1242
Oct 23, 2012I want to connect with wireless devices two buildings, one in front of another. Short distance (about 20 meters) and no obstacles. I have a couple of aironet 1242 and i was wondering if it would be possible to setup this link with this equipment.
could WGB be the solution?
Cisco Wireless :: CAP1602I-E-K9 Can't Register With 2500 Controller
May 18, 2013I am developing CAP1602I & 2500 Controller.The CAP1602I-E-K9 can't register with the 2500 controller. [code] logging appears: capwap can't process uncryped data..I even didn't configure capwap on CAP1602.May I know if CAP1602 doesn't support LWAPP? Why LWAPP doesn't work?According to the logging, I also tried to configure the "Data Encryption" on 2500 controller ( according to 7.0.116.0 guide)
"Cisco 2500, WiSM2, WLC2—By default, these platforms do not contain DTLS. To turn on data DTLS, you must install a license. These platforms have a single image with data DTLS turned off. To use data DTLS you will need to have a license."Note If your controller does not have a data DTLS license and if the access point associated with the controller has DTLS enabled, the data path will be unencrypted. I should purchase a license? or, if I can configure the CAP1602I to don't encrypt data?
Cisco :: 2500 Wireless Controller Blocking Traffic
May 16, 2012I have a Cisco 2500 Wireless Controller connected and controlling 5 Cisco AP's. Everything works fine except one device.
This device is used to connect to our AP wirelessly and then any of the wireless laptops can use programming software to connect to the device and program through it. I can successfully set up our device on the network and all PCs can ping it, but the programming software refuses to connect to it. I spent an hour and a half on the phone with the device people who assure me its the network. So, I bought in a cheap Linksys router, hooked one laptop up to it and configured the device wirelessly. With that, the programming software works.
what should I be looking for in the Wireless Controller that may be blocking direct connection to the device even though I can ping it?
Cisco Wireless :: Controller Auto Sensing Power And Channel 1242 APs To 3502E
Feb 20, 2013A few months ago we upgraded our warehouse from 1242 APs to 3502E APs. We changed 16 units, all in the same building. When we came in the next day we found out that they were all on channel 1 at their lowest power level. The WLC was set for auto negotiate for power and channel but for some reason it did not work. We had successfully changed they rest of the factory with the auto feature enabled but for some reason, the warehouse did not work properly. All APs have the same IOS and are they same model. We have WiSMs mounted in a 6509 chassis as our WLC.
View 1 Replies View RelatedCisco WAN :: 2500 - Controller Channel / Setting Up Wireless Badges
Feb 14, 2013We are currently using a Cisco 2500 (licensed for 50 AP's) WLAN Controller. There has been a lot of issues setting up the VOCERA wireless badges, thats on going. The question I have is all the AP's are showing as being on Channel 6, it was thought that the controller would learn the enviroment and move these to none overlapping channels, but has not. Is this right should they all be on the same channel and not 1, 6, 11 accordingly? it is also worth mentioning that the controller can see 61 rogue AP's, yes that is 61 other wireless networks!
View 2 Replies View RelatedCisco Wireless :: Comparison Of Features In Wi-Fi LAN Controller 2500 And 4400?
Jul 27, 2011give me the run down on the features removed from the 4400 series in the 2500 series? Obviously 4400 is now EOL, and so i cannot purchase new. Therefore I was looking at the 2500 for my implementation to save costs also.I would like to have two SSID's, running seperate VLAN's, one voice, one guest, trunk the link to the AP's, which will be 1131AG or newer, N possibly. Voice needs to be encrypted with WPA or WPA2, guest needs to be open using the guest access feature. Here's a sample but with EAP:
[URL]
Is this supported to have WPA on one SSID and Guest access on the other? i did spot a paragraph in the 4400 manual stating that certain restrictions apply regarding one SSID having encryption and the other being guest mode?I notice also in the WCS documentation, it doesn't explicitly state it supports the 2500 series under the managed devices section?
Cisco Wireless :: Configuring RADIUS Server On 2500 Controller
Dec 3, 2012We have recently installed Cisco for our wireless solution. We are an education and are looking to let staff and pupils bring their own devices. The route that we are planning to take to let them join the school's WiFi is to implement a RADIUS server so that they can authenticate with their Active Directory username and password. I have tried to test the solution but so far without any success. I am using a Windows Server 2008 R2 as my NPS server, I have setup the Cisco controller as per below:
Security Tab | RADIUS | Authentication - I added my windows server there and the preshared key, the Network User and Management is ticket and the server responds to a ping command,In the WLANs Tab, I selected my test WLAN and under Security | AAA Servers I selected the RADIUS server that I configured in the Security TabI then try to logon to my test WLAN and on the Cisco WLAN controller I get the following error: AAA Authentication Failure for UserName:test User Type: WLAN USER
Before trying to tinker with policies on the Windows Server I was wondering if the RADIUS is correctly setup on the Controller or have I missed something obvious?
Cisco :: Missing Access Points On 2500 Wireless Controller?
Jul 9, 2012We have a Cisco 2500 WLC with 136 APs. Recently, we discovered eight APs that were not listed on the Wireless > Access Points > All AP list. These APs were once working and connected, but now they are no longer in the All AP list. I located one of these APs and found the green LED blinking. I power cycled the AP and it came back online with a solid green LED and was then registered on the All AP list. The All AP list will only show the connected APs. I would like to know if there is a method to show the APs that were once connected and are no longer registered so we can better identify when an AP is not working?
View 15 Replies View RelatedCisco Wireless :: AIR-CAP1602I-E-K9 And 2500 Controller / Did Not Get Log Server Settings
Mar 5, 2013I have therefore 2504 Wireless Controller with a wireless access point AIR-CAP1602I-E-K9 (LWAPP image version 7.4.1.37) I saw that I needed to update the Controller in 7.4 for compatibility with my AP. Now when I connect my AP I get error messages:
*Mar 1 00:01:02.387: %CAPWAP-3-ERRORLOG: Did not get log server settings from D
HCP.
*Mar 1 00:01:02.387: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
[Code]....
Cisco Infrastructure :: Multicast For Aironet 1310 WGB And 1242 AP?
Mar 15, 2011I have configured a Aironet 1310 bridge as a WGB and is connected to a Aironet 1242AG AP wirelessly!A sensor(IP device) is wired into the 1310WGB. The sensor needs MULTICAST to operate!I checked the DETAILED STATUS of the RADIO and both the 1310 and 1242 are blocking multicast!The RELIABLE MULTICAST TO WGB option is enabled on the 1242AP already!
View 1 Replies View RelatedCisco Wireless :: 2500 WLAN Controller Series Compatible With LAP1131AG?
Apr 17, 2012I have a customer whom has six LAP1131AG-K9 but no controller and they are interested in one of the new 2500 series, specifically a AIR-CT2504-5-K9 with a 5 AP add-on license to bring total AP capacity to 10. I can't determine clearly if this controller will work for these older AP's prior to them making the jump to 802.11n via the 3500 or 3600 series, looking to the community to confirm.
View 3 Replies View RelatedCisco Wireless :: Training On 2500 Series Controller And 1142 / 1040 AP
Apr 21, 2013Looking for some training on the 2500 series controller and 1142 or 1040 AP's preferably.
View 10 Replies View RelatedCisco Wireless :: Wireless Controller 2500 And AIR CAP 3602i K9
Oct 25, 2012when I did connect the AP to the switch and this is already connected to the WLAN 2500, I got this error message [code] And this AP is not joined to the WLAN 2500, but if I use one model of AP like LAP1120 it works, that mean, the wireless is able to see the Ip Address.How can I do to correct the problem with the AP 3600 series?
View 5 Replies View RelatedCisco Wireless :: 2500 - Wireless Controller Settings
Apr 16, 2012I setup cisco wireless controller 2500 connecting 2 Aironet APs, with windows 2008 NPS as radius server (server certificate installed), via
[WPA2][Auth(802.1X)], MAC Filtering
Now I have domain computer (laptop) connected to SSID which provides direct to the LAN dhcp server. That means my notebook got same ip range as when it connected to LAN.
The user used cached domain logon info to logon the computer, then the wireless profile started to connect with radius server which has User group policy.
Problem is the notebook (logon as normal domain user) browse \"domain name" or any \hostname will take 10 mins or more to pop up with "enter network password" or sometimes "The specified netwrok name is no longer avail". However ever if I simply \192.168.2.x which is the host's ip address, I got list of share folders instantly.
And when I disable the wireless and connect to the LAN cable, I had no problem to browse any shared folders.
Cisco :: 3602i / 2500 Controller Joining
May 13, 2012I have a couple 3600s that don't want to join. One i and one e that are both doing the something. It is able to find the controller via layer 3 discovery but it is acting like it is a mesh AP when it tries to join the controller.
From the 2500 controller (running 7.2)
*spamApTask2: May 13 12:03:05.272: f0:f7:55:ae:xx:xx Mesh AP username f0f755aexx xx.
*spamApTask2: May 13 12:03:10.739: f0:f7:55:ae:xx:xx spamProcessJoinRequest : RA
P, Check MAC filter
From the 3602i
flash:/mesh_start_cfg.txt: No such file or directory. The filesystem containing the variables may not be initialized yet.
I should note that 3500 APs are able to join this controller. The field guy is going to try to add the MAC address to the filter list when he gets back out on site to see if it allows it to join.
SATA Controller For Dell Poweredge 2500?
Feb 3, 2011have a Dell Poweredge 2500, and it only has PCI slots, and i need to get a sata controller to add 1/2 drives to it, i am unsure what would be the best, but i am not looking to spend more than 60 or so for it, i am not worried about it being the greatest out there, as this server is going to be replaced in 6 mths, i am just outgrowing the 4-18.6 gig hot swap scsi drives, and my pockets arent deep enough to buy high capacity scsi drives, i will probably add 1, 1 or 2 Terabyte hard drive and a dvd-rw.
View 4 Replies View RelatedCisco Wireless :: Can 2 Aironet 1042 Use WDS Without Controller?
Sep 20, 2012Can 2 Aironet 1042's using WDS handoff a session between them without any other network hardware needed?
View 1 Replies View RelatedCisco Wireless :: Aironet 3500 LAP Without Controller?
May 4, 2012We have couple of Cisco Aironet 3500 Series access points with the following P/N: "AIR-CAP3501E-A-K9", we have discovered that we need a wireless LAN controller to connect those new access points!, however, we do not have any wireless controller in our LAN.
We even tried to CLI through the console port but we could not set any static IP on it!, after reading on Cisco site we discover that this type of AP is called "Lightweight Access Point" LAP which handles all the management tasks to the controller!
So what shall we do! is it impossible to operate them without the controller?
Cisco Wireless :: 1142 Aironet Won't Join Controller
Aug 6, 2012When I check the AP join statistics I see the following: Reason For Last Unsuccessful Attempt RADIUS authorization is pending for the AP, I don't run a radius server and don't know how to get around this so that the device can join.
View 4 Replies View RelatedCisco Wireless :: Aironet 3602I Is Stand Alone Or Need A Controller?
Apr 8, 2012Cisco Aironet 3602I is stand alone or need a controller ?
View 8 Replies View RelatedCisco Wireless :: Aironet 1230 Cannot Join Controller
May 7, 2012my access point 1230 fail to join the controller. The image is C1200-k9w7-mx.123-8.JA2. I tried to reboot it but it does not join to controller. How do I initiate the discovery process again to make this AP to join? Should I convert it back to autonomous AP and then LWAPP process again? I can ping the AP from the controller and the AP is in the same VLAN with controller.
View 3 Replies View RelatedCisco Wireless :: Set Aironet 1232AG-A-K9 As Repeater While Using 4402 Controller
Oct 8, 2012Is it possible to set an Aironet 1232AG-A-K9 as a repeater while still using a 4402 controller? I have some wireless security cameras in our parking lots that I need to extend wireless to and I have a handful of 1232 points that I am not using. I have some omni antennas and a yagi directional that I was planning on using.Everything I am reading talks about configuring the AP while in automous mode, not while running the lightweight image.
View 2 Replies View RelatedCisco Wireless :: Setting Up Aironet 2600 APs With 2504 Controller
Mar 19, 2013I've recently purchased a 2504 Wireless controller, and I have 10 2600 APs to deploy. I think I've set up the wireless controller OK - there doesn't seem to be much that needs to be done! But I just can't seem to register an AP onto the system.
Just to briefly outline what I have done, I have connected to the Wireless Controller via terminal emulator and run through the setup, then I have connected OK to the web interface, and I am able to view and amend the controller's configuration. So I have setup a WLAN and thats about it.
Next up I have powered on one of my 2600 APs, and I am able to view it working via terminal emulator again. But I am seeing it continually running the same routine to connect to a controller, and all the time it just fails. Below is what I am seeing.
One thing that I am unsure about is that I am unable to connect to the AP config pages via web browser, using the IP 192.168.0.97 (although it does ping okay). Is that odd?
And the main question - why doesn't the AP connect to the wireless controller? Do the APs need to be authroized on the controller first? If I check the controller's web interface, under Monitor - Statistics - AP Join, I can see the AP listed with Status "Not Joined" but I don't know what I need to do to make it join!
*Mar 1 02:28:54.579: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.*Mar 1 02:28:57.583: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.*Mar 1 02:28:57.651: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 192.168.0.97, mask 255.255.255.0, hostname APb0fa.eb56.5abf(code)
Cisco Wireless :: Aironet 1260 Access Point Work Without Controller??
Dec 1, 2010I would like to buy Cisco Aironet 1260 Access Points, i just want to use them independantly so i want to know do they work without the Wireless LAN Controller? or i have to have the controller for them to work? they will be in different locations so i cant have a controller per each location.
View 9 Replies View RelatedCisco Wireless :: 2504 Controller With 3 Aironet 1142 Access Points
Mar 16, 2013I have installed/setup a cisco 2504 wireless controller and 3 aironet 1142 access points using the basic config on a windows sbs 2008 domain, the problem is that the clients that are connected to the 2504 aint getting the there ip addr from the AD but from the wireless controller, and there cant reach the clients on wifi from the clients that are connected to lan, is there anyway that i cant change this so that a client on lan can see the client on wlan and vice versa.
View 5 Replies View Related