Wireless-n Wifi Repeater Connection Failure
Oct 28, 2012
I have recently purchased a Wireless-N repeater which is now up and running and connects with both Ipad, iPhone and other laptops with ease. The problem is that I can't connect using my own PC. I'm using Windows Vista and the connection to the repeater seems fine, it just can't connect to the Internet. Every time I try and open a web page I receive the following message.Error 105 (net:ERR_NAME_NOT_RESOLVED) Unable to resolve the servers DNS address.
View 7 Replies
ADVERTISEMENT
Aug 26, 2012
I recently updated my WRT54G V3 to frimware 4.21.5 and now get regular wireless connection issues. The wired connection never has any problem (can connect to the router and the internet), but none of the wireless devices can see either.
The problem happens every couple of days, and cycling the power seems to be the only fix. When the problem does occur, the wireless devices don't even see the broadcasted SSID. But cycling the WRT54G's power fixes that.
I've gotten a few suggestions to do a "30-30-30" reset, but can't find exactly what that entails.
View 5 Replies
View Related
Jan 6, 2012
Since a few days I've installed my Sitecom 300N Repeater to extend the wifi signal at my home.I named my repeater the same as my wifi UPC modem (Cisco EPC3925), so the PC will see 1 connection instead of 2. I also turned off the DHCP server on the repeater (not sure what it does, but it was recommended when I was goggling around).fortunately I'm experiencing a lot of trouble. Although I can connect to the repeater, the signal is not always stable. Many times my connection speed is as low as 3 Mbps. When I quickly turn the power off and on it instantly jumps back to around 40 Mbps and stays like that for a few hours/days.It's very hard to debug this problem because after resetting the the repeater is doing very good until it slows down or even dispersers after a few hours.
View 4 Replies
View Related
Nov 30, 2011
is it any possibility to set my router WRT54G V2.2 as a wireless repeater? and does any manual for this exist?
View 3 Replies
View Related
Mar 22, 2011
it an hp notebook PC with an intel processor and 3GB of RAM
View 1 Replies
View Related
Mar 4, 2011
trying to connect studio 540 desktop by wireless connection with homeowners airport extreme. windows cant find connection. sure had wireless card installed at purchase. what adapter do i need? wireless card? what are options for wireless network connection for this desktop
View 1 Replies
View Related
Jun 12, 2012
I have set up my linksys in my main hall, i get a decent wifi signal in my room. But i get very very poor signals on my phones (bb9780 and Samsung S2). I bought a Huawei WS320 wifi repeater. how to connect these two so that i can get a strong enough signal in my room ?
View 2 Replies
View Related
Apr 9, 2013
Region : Singapore
Model : TL-WR700N
Hardware Version : V1
Firmware Version :
Since i know there's a "Repeater Operation Mode" in TL-WR700N Wireless Lan Mini Pocket Router, so what's the difference between TL-WA850RE WiFi Range Extender?I know the maxium speed support is different, but.... what else ?
View 1 Replies
View Related
Dec 26, 2012
As I am more of a hardware guy and pretty clueless about networking, I thought I'd come here because I am pretty frustrated right now.So yesterday, I got an Amped Wireless SR10000 Repeater for Christmas. I had it set up and working with no problems. However, this message did pop up when it was finished:
I ignored it (stupid me) because I didn't know what to do. The connection worked fine for a while, but now a day later, the connection keeps dropping. I would assume it is because of this.I did a bit of research and it seems like setting up a static IP will fix the problem, but I have no idea how to do that.
View 3 Replies
View Related
Dec 29, 2011
I can't connect my DirecTV DVR to my WRT54GS router. I am using a new cat6 ethernet cable to the router.
View 5 Replies
View Related
Feb 27, 2013
I just purchased 2 AE3000 adapters to update my wireless network and cannot get either of them to connect to my wireless network through either of two computers I tried. It hangs for a while looking for address and then I get the 'limited or no connection' note. But yet when I plug in my old AE1000 adapter into either computer I get connected right away. I've looked under the device manager and it shows up there, the LED lights come on and I see my wireless network show up on available networks. I am using the windows wireless manager in lieu of the Linksys one and as such I don't think any specific drivers are being used. I bought two updated adapters to start with is to keep current and NOT have problems.
XP Pro SP3
WRT350N Router
View 6 Replies
View Related
Nov 13, 2012
We pay for the 12 Mbps package from Comcast and speedtest.net shows that we get a roughly 18 - 19 Mbps connection. We have 4 computers connected to the network, one hard-lined and three wireless.
Usually it is not a problem for my roommate and I to play online games like TF2, Eve, Minecraft, L4D2 with C3 voice chat on our desktops while I simultaneously stream something from Netflix across my laptop.
Lately though, something has changed.
Now, whenever I am using my desktop and playing a game or downloading something (at roughly 2 Mbps) it seems to hog ALL of the bandwidth from the other computers on the network as Netflix suddenly begins having buffering issues on my laptop (wireless) and on my roommate's dektop.
As an example:
For the past few days my roommate and I have been trying to play Minecraft, we use C3 to voice chat while we play and I ALWAYS stream something across Netflix while we play. So in this instance we have one hard-lined connection and one wireless connection running Minecraft (across the LAN) and C3 (across the web) and one additional wireless connection streaming video from netflix (NOT HD Video).
This is common usage for us and it has NEVER been a problem in the past, but in the past few days this setup causes my desktop to lose bandwidth which forces my friend out of the game and causes latency issues with the voice chat program (sound breaks up and my roommate hears my voice chat nearly a minute after I've spoken).
Also, it seems that when my desktop (wireless) connection is working fine using around 2 Mbps, it seems to kill my laptop's (wireless) bandwidth and on one occasion the other night seemed to also affect my roommate's desktop (hard-lined) bandwidth while he was watching something on Netflix.
View 1 Replies
View Related
Jul 19, 2012
I have a Problem with a customer WLAN. The customer has a Aeronet 1130AG AP. Now i should configure a Aironet 1130 Repater for this WLAN. The initial connection from the Repater with the AP is no Problem. But after some time the Repeater lost the connection. On the AP i see following Messages:20Jul 19 19:05:28.061InformationInterface Dot11Radio0, Deauthenticating Station xxx Reason: Previous authentication no longer valid 21Jul 19 19:05:28.061WarningPacket to client xxx reached max retries, removing the client 22Jul 19 16:43:59.412InformationInterface Dot11Radio0, Station yyy Associated to Parent xxx23Jul 19 16:43:57.901InformationInterface Dot11Radio0, Deauthenticating Station yyy 24Jul 19 16:43:56.536InformationInterface Dot11Radio0, Station yyy Associated to Parent xxx 25Jul 19 16:43:51.555InformationInterface Dot11Radio0, Station zzz Associated KEY_MGMT[WPA PSK] 26Jul 19 16:43:29.078InformationInterface Dot11Radio0, Station Repeater01 xxx Associated KEY_MGMT[WPA PSK]
View 2 Replies
View Related
Apr 8, 2013
I find that within my apt I can only get about 32% signal from my shaw Wi-Fi router. They don't support what I want to do.. adding my d-link router to boost or repeat the signal.
View 1 Replies
View Related
Nov 24, 2011
I have 2 routerswifi-router1 ( its a wifi router with adsl2+ modem)IP: 192.168.1.1SSID: TPLink wifi-router2 (its working in repeater mode)IP: 192.168.1.50SSID: TendaI configured wifi-router2's repeater mode via site-scan and then selected my wifi-router1. It did not gave me any error.Now I can connect to both wifi-router1 and wifi-router2 but internet is only working on wifi-router1. What specifict settings I need to get internet from wifi-router2 also.
View 11 Replies
View Related
Feb 1, 2011
can i make my lap top a wifi extender/repeater?
View 2 Replies
View Related
Aug 16, 2012
I have a wireless access point/modem at one end of my property (which I cannot relocate). To improve wireless connectivity on the other end of the property I am thinking of placing a wifi repeater (probably a cheap one like http:[URL]... mid-point in the property. However I don't quite understand how these things work. I assume repeaters, extenders, boosters are all the same thing?
Does the repeater actually create a new seperate wifi network, so I will effectively have two wifi networks/SSIDs? or will my wireless devices still see only one wifi network? If it creates two wifi networks what happens when I move through the property with say a laptop, will the laptop need to disconnect from one and reconnect to the other hence interrupting the connection? (which is not ideal).
Also does the repeater take up an IP from my main wireless access point/modem? My setup uses a block of static IPs and hence I would prefer not to waste an IP on the repeater if possible.Homeplugs is something else I'm looking into but that seems to be a more expensive option. With Homeplugs I would disable the wireless on the main access point/modem. Then use the Homeplug to put a wireless access point in the centre of my property hence giving fuller coverage.I've also tried higher DBi antennas (& directional ones) but they have not been effective.
View 1 Replies
View Related
Oct 31, 2012
im just want to ask a favor if you can guide me to set up or configure a router repeater to extend my wifi at my home. i dont have a specific brand of repeater yet.. im planning to buy but i have no idea how to set up a repeater by myself.
View 1 Replies
View Related
Apr 12, 2011
I am trying to use a NETGEAR 54Mbps Wireless ADSL2+ Modem Router (Model DG834G v4) as a repeater to extend the WiFi I currently have off another NETGEAR router in my house to my office which is a seperate building in my backyard (75 feet away depending on where I place my router exactly).I've scoured the vast internet for specifics with this particular router. I am fairly well versed in computer-type verbage and usage, but networking is an alien language to me.
View 1 Replies
View Related
Sep 9, 2012
I have the main router, which is SMC SMCD3GN from Rogers in Canada, and I have heard from MANY people that this router REALLY sucks..especially the range. And I myself also had problem with low signal in the 2nd floor of my house, so I purchased the wifi repeater (TP Link) to extend the range. I followed the guide given in the box, and everything was set up flawlessly. However, after a few hours of use, all my devices (laptop, tablet, phone) which are in the same room as the repeater decrease the signal again, to the point where it was before I purchased the repeater. Then if I disconnect the wifi and reconnect, the signal is full again. Sometimes I have to unplug the repeater from the wall and replug in order for it to work.
View 2 Replies
View Related
Mar 11, 2012
I have a existing WiFi ADSL router and I have a WAG120N lying spare in my closet. I recently shifted to my room a floor above. I wanted to amplify signals as the current router is not able to beam signals that far. Hence I wanted to set this up as a WiFi repeater to have a complete coverage. I tried N number of ways but could not succeed.
View 1 Replies
View Related
Sep 4, 2012
make dlink dsl router 2640T to be working as repeater which will be able to receive wifi signals. I've seen one guy using the same dlink dsl-2640T as wifi signal repeater where he was successfully able to receive wifi signals[CODE]
View 5 Replies
View Related
Mar 7, 2013
I recently purchased a Wi-Fi repeater (Siemens Gigaset Repeater WLAN SE365) to boost my wi-fi signal throughout my house without having to drill through walls of concrete (with a boost in phone wi-fi in mind on the top floor of the house). I was advised to buy one specifically with the make and model of my router in mind, as connectivity might be an issue if these don't match up. I own a Siemens Gigaset SX55 router so there should be no issue there (I can use the repeater on 2 different frequencies, not sure which one is best, 2.4 or 5 ghz). The instruction manual told me to connect the repeater to my pc once (through use of an Ethernet-cable supplied) so I could alter the settings of the repeater to match with that of my router (same SSID, protection method, channel). Whereas naming it the same as the router by modifying the SSID and using the same ASCII WEP-protection password as the router were doable, I could not find an option to change a channel.
At this point the instruction manual was fresh out of ideas and told me that I had set up the repeater as it should be installed. After unplugging it from my pc and plugging the regular ethernet cable back in for internet (There is wi-fi coming from the router downstairs but also a cable through the house to the pc) I was ready to go and seeing the wi-fi bars on my phone jump up to maximum made me extremely happy. Unfortunately the phone (and the app Wifi Analyzer) did recognize the full signal but when trying to open sites or apps that use internet it responded as if it had no signal whatsoever
View 3 Replies
View Related
Apr 3, 2013
i have a Echolife HG520c. internet through wireless is working fine but the internet through cable is not. this seems unusual FYI: i have checked the connections and all are fine, i have restarted my system and also the Echolife HG520c and it still has the same problem
View 1 Replies
View Related
Sep 28, 2012
I can't connect too any game servers.This is the error i get when i try to log into any acount on League of Legends:Connection Failure: Unable to connect to the PVP.net server.Information regarding what may have caused this error can be found here.Service availability can be viewed on the League of Legends Server Status web page.
View 5 Replies
View Related
Dec 6, 2011
I have a Cisco 819 WAN Router (C819 Secure M2M GW (non-US) 3.7G HSPA+ R7 w/SMS/GPS).Software: Cisco IOS Software, C800 Software (C800-UNIVERSALK9-M), Version 15.2(2)T, RELEASE SOFTWARE (fc1)
For dialing in at my Provider (T-mobile Germany), I use the following chat-script:
chat-script gsm "" ATZ "" AT+CGDCONT=1 "OK" "AT!SCACT=1,1" TIMEOUT 60 "OK" "ATD*99#" "CONNECT"
Dial-In is successful after Reboot.Now, i want to simulate a conenction fault, e.g. termination by mobile provider.So I used the command "clear int cellular 0".After that, The router can't dial in again.
Debug shows:
Dec 7 11:04:03: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to down
Dec 7 11:04:14: CHAT3: Attempting async line dialer script
Dec 7 11:04:14: CHAT3: Dialing using Modem script: gsm & System script: none
Dec 7 11:04:14: CHAT3: process started
Dec 7 11:04:14: CHAT3: Asserting DTR
[code]...
Is the "clear interface cellular 0" the wrong way to test this, or why can't the Router reconnect?The only solution is a reboot, but that is not the best option. The router should automatically redial.
View 10 Replies
View Related
Mar 23, 2012
I will just explain my setup:
I have a ADSL Huwavi modem by my ISP installed at my place.. Now the wireless from that device is very bad.. So I purchased WAG120N to setup a daisy-chain kind of setup in my other bedroom. I also put another D-link DIR-600 in between to give a connection to the first floor (via Ethernet cable).
So my huwavi is the ISP device, then a LAN from it goes to the dlink internet (WAN) port. then one cable from the d-link LAN port to the LAN1 of WAG120N and another upstairs.
Now all of this was working perfectly.. I put same SSIDs and Pwds on both ISP router and WAG120N and i was getting seamless net..
Now yesterday we removed the ISP modem to do some shifting.. Upon reconnecting, the ISP modem, Dlink work as before, but the WAG120N refuses to connect to the net.. it shows DSL down and doesn't access the www.
What I felt is that since i changed LAN ports on my ISP device and dlink, the static IP settings on the WAG120N should be changed.. i modified it, set to to point to the dlink for internet and huwavie for DHCP.. yet nothings happening..
I even connected the WAG120N directly to the Huwavie, yet it fails to connect to the net..
View 1 Replies
View Related
Mar 27, 2011
Ive got a virtualised firewall running 3 security contexts in routed mode. What am experiencing is that i cannot connect to an OUTSIDE host through the security contexts. From the firewall itself i cannot ping the directly attached host on the OUTSIDE interface but i can ping the directly attached host on the INSIDE interface. When i reload the firewall box, the first ping to the OUTSIDE host would be successful but subsequent pings fail and thus total connectivity is lost.
I even tried upgrading to ASA version 8.4(1) but still the same.
View 5 Replies
View Related
Nov 12, 2012
I have a ACE4710 setup to load balance a couple of web servers. The real servers all show as inservice as do the propbes and serverfarms/virtual servers. If I ping the Virtuual server ip address I get a reply but it I try to access VIP via telnet or web browser. I get a connection could not be open error on the client.The question is how do i determine where the error is comming from so far I can not tell if the client is getting through the acl or not.I have used the trouble shooting guide and nothing has worked to determine the cause so far. show service-policy int479 detail does not show an increase in the hit count when I try to connect.show stats conn does not show an increase in failed or timed out connections when i try to connect. [code]
View 3 Replies
View Related
Sep 29, 2011
Missing local area connection icon in network connection after power failure?
View 1 Replies
View Related
May 9, 2012
I have a 2nd pc that i want to add to my basic home network. I have installed a fresh copy of Windows 7 Ultimate 64bit yet still have issues connecting to my router. There is basic activity but nothing on the internet I have tried to use command line netsh to force DHCP on it says it is but I am getting a subnet mask of 255.255.0.0 when everything else is 255.255.255.0 not sure if this matters as there are only 4 devices on the network.
View 2 Replies
View Related
Apr 28, 2011
Connection denied due to NAT reverse path failure
View 2 Replies
View Related
May 3, 2011
I am using a PPPoE connection using a linksys WRT54G router (working perfectly) and am now trying to set up an Edimax EW-7206APg to extend my wireless connection range. I followed the instructions given on the Edimax manual, and while my devices (iPad, laptop) got connected to the new repeater network, I could not access the Internet from it. I may be wrong, but the instructions on the Edimax manual seemed to be for a DHCP connection. Is there anything different I need to do to configure the Edimax repeater on a PPPoE connection?My router IP ("Local IP address") shows 10.10.0.1 instead of the "192.168.1.1" that all the documentation online seems to suggest.
View 6 Replies
View Related
