Wifi Repeater Correct Settings?
Nov 24, 2011
I have 2 routerswifi-router1 ( its a wifi router with adsl2+ modem)IP: 192.168.1.1SSID: TPLink wifi-router2 (its working in repeater mode)IP: 192.168.1.50SSID: TendaI configured wifi-router2's repeater mode via site-scan and then selected my wifi-router1. It did not gave me any error.Now I can connect to both wifi-router1 and wifi-router2 but internet is only working on wifi-router1. What specifict settings I need to get internet from wifi-router2 also.
View 11 Replies
ADVERTISEMENT
Jul 19, 2011
I bought my self a WRT120N as my wireless router for my house. and not a long ago i bought the WAP4410N, for my repeater (after i ask to some people).my house were concrete wall, it have about 15-20cm thick, and we try to avoid any wired LAN. The destinaton were unreachable with only WRT120N.it's look like this (what i want for the network on my home) : [code] i already tried to setting the WAP4410 as a wireless WDS repeater, and wireless client/repeater (with and without "Allow wireless stations to associate"). both were unable to connect (limited), although i get the signal. for the IP on the WAP4410N (192.168.0.50), i used static IP [IP, Subnet and Default Gateway were fill in] within the WRT120N range (192.168.0.2 ->192.168.0.51)
- how i configure my WAP4410N as a repeater?
- is there any settings that i must set on the WRT120N, before combining the WAP4410N?
View 1 Replies
View Related
Sep 21, 2012
my toshiba a300 sattalite laptop. i'm so sad i can't find correct driver for ip config.
View 1 Replies
View Related
Feb 22, 2011
I have installed a new ASUS PCE-N13 network adapter. My problem is this: The network adapter easily detects my wireless router (full strength) so I click connect and it asks me for my p/w. I type the p/w in and my computer instantly tells me it is wrong. I know full well the p/w is right because I live with 2 other people and they both have laptops which connect no problem.
View 6 Replies
View Related
Apr 8, 2013
I find that within my apt I can only get about 32% signal from my shaw Wi-Fi router. They don't support what I want to do.. adding my d-link router to boost or repeat the signal.
View 1 Replies
View Related
Feb 1, 2011
can i make my lap top a wifi extender/repeater?
View 2 Replies
View Related
Aug 16, 2012
I have a wireless access point/modem at one end of my property (which I cannot relocate). To improve wireless connectivity on the other end of the property I am thinking of placing a wifi repeater (probably a cheap one like http:[URL]... mid-point in the property. However I don't quite understand how these things work. I assume repeaters, extenders, boosters are all the same thing?
Does the repeater actually create a new seperate wifi network, so I will effectively have two wifi networks/SSIDs? or will my wireless devices still see only one wifi network? If it creates two wifi networks what happens when I move through the property with say a laptop, will the laptop need to disconnect from one and reconnect to the other hence interrupting the connection? (which is not ideal).
Also does the repeater take up an IP from my main wireless access point/modem? My setup uses a block of static IPs and hence I would prefer not to waste an IP on the repeater if possible.Homeplugs is something else I'm looking into but that seems to be a more expensive option. With Homeplugs I would disable the wireless on the main access point/modem. Then use the Homeplug to put a wireless access point in the centre of my property hence giving fuller coverage.I've also tried higher DBi antennas (& directional ones) but they have not been effective.
View 1 Replies
View Related
Oct 31, 2012
im just want to ask a favor if you can guide me to set up or configure a router repeater to extend my wifi at my home. i dont have a specific brand of repeater yet.. im planning to buy but i have no idea how to set up a repeater by myself.
View 1 Replies
View Related
Oct 28, 2012
I have recently purchased a Wireless-N repeater which is now up and running and connects with both Ipad, iPhone and other laptops with ease. The problem is that I can't connect using my own PC. I'm using Windows Vista and the connection to the repeater seems fine, it just can't connect to the Internet. Every time I try and open a web page I receive the following message.Error 105 (net:ERR_NAME_NOT_RESOLVED) Unable to resolve the servers DNS address.
View 7 Replies
View Related
Apr 12, 2011
I am trying to use a NETGEAR 54Mbps Wireless ADSL2+ Modem Router (Model DG834G v4) as a repeater to extend the WiFi I currently have off another NETGEAR router in my house to my office which is a seperate building in my backyard (75 feet away depending on where I place my router exactly).I've scoured the vast internet for specifics with this particular router. I am fairly well versed in computer-type verbage and usage, but networking is an alien language to me.
View 1 Replies
View Related
Sep 9, 2012
I have the main router, which is SMC SMCD3GN from Rogers in Canada, and I have heard from MANY people that this router REALLY sucks..especially the range. And I myself also had problem with low signal in the 2nd floor of my house, so I purchased the wifi repeater (TP Link) to extend the range. I followed the guide given in the box, and everything was set up flawlessly. However, after a few hours of use, all my devices (laptop, tablet, phone) which are in the same room as the repeater decrease the signal again, to the point where it was before I purchased the repeater. Then if I disconnect the wifi and reconnect, the signal is full again. Sometimes I have to unplug the repeater from the wall and replug in order for it to work.
View 2 Replies
View Related
Jan 6, 2012
Since a few days I've installed my Sitecom 300N Repeater to extend the wifi signal at my home.I named my repeater the same as my wifi UPC modem (Cisco EPC3925), so the PC will see 1 connection instead of 2. I also turned off the DHCP server on the repeater (not sure what it does, but it was recommended when I was goggling around).fortunately I'm experiencing a lot of trouble. Although I can connect to the repeater, the signal is not always stable. Many times my connection speed is as low as 3 Mbps. When I quickly turn the power off and on it instantly jumps back to around 40 Mbps and stays like that for a few hours/days.It's very hard to debug this problem because after resetting the the repeater is doing very good until it slows down or even dispersers after a few hours.
View 4 Replies
View Related
Mar 11, 2012
I have a existing WiFi ADSL router and I have a WAG120N lying spare in my closet. I recently shifted to my room a floor above. I wanted to amplify signals as the current router is not able to beam signals that far. Hence I wanted to set this up as a WiFi repeater to have a complete coverage. I tried N number of ways but could not succeed.
View 1 Replies
View Related
Nov 30, 2011
is it any possibility to set my router WRT54G V2.2 as a wireless repeater? and does any manual for this exist?
View 3 Replies
View Related
Sep 4, 2012
make dlink dsl router 2640T to be working as repeater which will be able to receive wifi signals. I've seen one guy using the same dlink dsl-2640T as wifi signal repeater where he was successfully able to receive wifi signals[CODE]
View 5 Replies
View Related
Mar 7, 2013
I recently purchased a Wi-Fi repeater (Siemens Gigaset Repeater WLAN SE365) to boost my wi-fi signal throughout my house without having to drill through walls of concrete (with a boost in phone wi-fi in mind on the top floor of the house). I was advised to buy one specifically with the make and model of my router in mind, as connectivity might be an issue if these don't match up. I own a Siemens Gigaset SX55 router so there should be no issue there (I can use the repeater on 2 different frequencies, not sure which one is best, 2.4 or 5 ghz). The instruction manual told me to connect the repeater to my pc once (through use of an Ethernet-cable supplied) so I could alter the settings of the repeater to match with that of my router (same SSID, protection method, channel). Whereas naming it the same as the router by modifying the SSID and using the same ASCII WEP-protection password as the router were doable, I could not find an option to change a channel.
At this point the instruction manual was fresh out of ideas and told me that I had set up the repeater as it should be installed. After unplugging it from my pc and plugging the regular ethernet cable back in for internet (There is wi-fi coming from the router downstairs but also a cable through the house to the pc) I was ready to go and seeing the wi-fi bars on my phone jump up to maximum made me extremely happy. Unfortunately the phone (and the app Wifi Analyzer) did recognize the full signal but when trying to open sites or apps that use internet it responded as if it had no signal whatsoever
View 3 Replies
View Related
Jun 12, 2012
I have set up my linksys in my main hall, i get a decent wifi signal in my room. But i get very very poor signals on my phones (bb9780 and Samsung S2). I bought a Huawei WS320 wifi repeater. how to connect these two so that i can get a strong enough signal in my room ?
View 2 Replies
View Related
Apr 9, 2013
Region : Singapore
Model : TL-WR700N
Hardware Version : V1
Firmware Version :
Since i know there's a "Repeater Operation Mode" in TL-WR700N Wireless Lan Mini Pocket Router, so what's the difference between TL-WA850RE WiFi Range Extender?I know the maxium speed support is different, but.... what else ?
View 1 Replies
View Related
Oct 22, 2012
In my restaurant, we currently have a password protected wifi network for customers and staff. The load is typically light, so it's worked fine. Now, we're putting in a new cloud-based point of sales system, which effectively means that I need a totally uninterrupted, high quality wireless signal running to the POS terminal (in this case, an iPad). If the terminal is sharing that connection with 15 customers Facebooking on their iPhones, I imagine we'll have some signal issues. I'd rather not install a second network dedicated to the POS terminal. Are there any other possible solutions, i.e. a way to give priority to the terminal over other connections? A way to "split" the existing network so only a portion of it is available to customers?
FYI, current network speed is 20/mbs 2/mbs, and the POS terminal requires a minimum of 7/2 mbs.
View 5 Replies
View Related
Oct 30, 2012
I am trying to set up e-mail on my Nexus 7 tablet and need the security code on wifi settings.
View 1 Replies
View Related
Feb 5, 2012
i am using hp g62 notebook and i an unable to turn on the wifi adapter. in my hp wireless assisatant there is bluetooth option to turn on and that is also not working. i tried switching on the fn key and f12 no use. how do i enable the wifi adapter.
View 1 Replies
View Related
Jan 11, 2011
we are charter High speed customers and just recently upgraded are connection speedHowever today my sisters netbook wireless connection stopped working. My DS wifi connection is also dead now In the past the the wireless network name was wifi-****** but now its called wireless and the wep key no longer works
View 5 Replies
View Related
Feb 11, 2012
I expect to receive a new Kindle Touch w/WiFi next week.I presently have my RR modem plugged to the DIR-655 and one Ethernet cable from the router to the PC and another (a 40' Cat6 Ethernet cable) going from the DIR-655 to a bus and then to an Internet-ready HDTV. I'm able to watch NetFlix streaming movies.I'm wanting to know step-by-step for each setting for my DIR-655 so that I can download books via WiFi to my Kindle Touch from Amazon's library.I have Windows 7 Home Premium 64x Media Center Player?
View 3 Replies
View Related
Jan 1, 2012
need passwords for netgear 1 wifi . free
View 2 Replies
View Related
Jan 2, 2013
i m using samsunggalaxy young s5360. i am having airtel broadband wifi and i wanted to connect to my mobile.
View 1 Replies
View Related
Jul 16, 2012
I just purchased an e4200 in a corporate environment where we already have a wireless router. I am not able to connect the 2 devices via a LAN cable and am wondering if I can get bridge mode working over the network (wireless). I set the Linksys to bridge mode and assigned it an ip address. I disabled all wireless settings, etc. I then connected the internet port of the Linksys into a data port (wall jack) that connects to our flat network switch. It says it's connected under "Status" but I'm not sure how to confirm this.
View 3 Replies
View Related
Apr 5, 2013
After a successful firmware update to my router I can’t configure wireless settings because the .htm page stays blank if I back the page it comes back to setup page but any config page shows blank with no error message. I’m on a win8 64 iexplorer 10, also tried on a win7 32 IE 8,9,10.
View 1 Replies
View Related
Dec 17, 2012
Region : Others
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP :
I have 2 TP-Link # 941NDs at my home. ( version 3.6 )In the new ( second ) TP link, i activate WDS - Wireless Bridge. And configure it to through Wi-Fi connect with earlier TP-Link, and also to act as router to cater to PCs within its range. IPs are set as per of same family as that of primary TP-Link, and further, DHCP been de-activated as well. Have sent WEP security as well.It performs correctly for the time, its stays ON, but when its switched Off, and then On again, it is not able to connect to the primary TP-Link and thus not able to serve its client PCs.
View 4 Replies
View Related
Dec 1, 2011
I just upgraded from a WRTG 54 version 2 wireless router to the Linsksys E2500. The reason for the change is to send a stronger wireless signal strength further in my house. Setup was easy to my laptop and XBox 360 but my Samsung Internet TV is another story. I can get my tv to get the wireless signal but when I click on an app nothing but error messages. Often times it will say to check my dns settings but I am not that tech savvy and don't know what to do.
View 9 Replies
View Related
Sep 25, 2012
I am currently living in student halls, and so far I have been successfully using the halls' provided internet (ethernet port in wall) via a wireless router (belkin wireless ADSL). Until now.I have been unable to connect or the internet either via the router, or by direct connection to the wall.Whilst connected directly into the wall socket via the ethernet cable, my pc still thinks that I am connecting directly into the modem, and still labels the wired LAN connection as 'belkin 54g', despite the router not being connected at all.I have called the technical support for the network, and they have told me that my computer is assigning the wrong ipv4 address, and they had me do a cmd prompt and run ipconfig /reset and ipconfig /renew. This still did not solve the problem, as my PC still tried to connect with the same incorrect IP address. I know the problem is not with the ethernet port or cable, as I have tried in another room that has a working connection, and I still am unable to connect to the internet (DNS error on chrome).
View 5 Replies
View Related
Jul 9, 2011
How to get the correct Ethernet controller driver for this machine?
View 1 Replies
View Related
Sep 5, 2012
How to find the correct port a printer is connected on using just the IP address on a CISCO WS-C4006/CAT IOS.
View 1 Replies
View Related
Dec 11, 2011
I've recently started having some odd issues with one of my computers connecting to the internet on my linksys wireless-n router from my pc. When I enter in the security settings correctly for the network I have setup here at home, it says "The wireless network security key is not correct."But I know it is, and I have confirmed on my laptop (which is using the correct settings and is having no issues at all, it's what I'm posting this with) the settings are correct. It has the correct 'Security type (wpa2-personal)', encryption type (aes), and network security key. I have restarted the pc computer and reset the router from factory settings many times, all to no avail. I've used several different linksys wireless adapters and usb slots, and it keeps on with the same issue. Kind of odd thing is, when I change the security type on my computer settings to wpa personal from wpa2 personal, and encryption type to tkip from aes, and enter the passcode correctly, it will connect to the network but with no internet access, local only. I've also connected to the wireless routers setup page (192.168.1.1.) from the laptop and confirmed settings. When I am able to connect from the pc when I change the settings and it gives me local access, I am still unable to the routers setup (192.168.1.1), so I dont know if I'm actually even connected locally when it says I am.Also, the signal strength from the network is Excellent (full bars).When I ipconfig /all ,media state is disconnected When I ping 192.168.1.1 , destination host unreachable, but received all packets with 0% loss.
View 2 Replies
View Related
