Make Dlink Dsl-2640t Router To Work As Wifi Repeater?
Sep 4, 2012
make dlink dsl router 2640T to be working as repeater which will be able to receive wifi signals. I've seen one guy using the same dlink dsl-2640T as wifi signal repeater where he was successfully able to receive wifi signals[CODE]
View 5 Replies
ADVERTISEMENT
Jan 10, 2011
dlink adsl-2460t which is really torturing. I ahve connnected my cable net modem to my router but unfortunately its of no use cos i cant connect my laptop to it. Although it shows the availablity of the connection but it doesn't get through to net..it keeps on giving a caution sign on the bottom right corner, above the signal strength...
View 1 Replies
View Related
Feb 1, 2012
Is it possible to change the firmware on my dl2670 router so i may use my 3g usb stick, as the router does have usb ports?
View 1 Replies
View Related
Feb 1, 2011
can i make my lap top a wifi extender/repeater?
View 2 Replies
View Related
Oct 22, 2011
I have an older PC with windows 98 running. I used to have it connected to a modem and a router to get internet access.I recently got a new modem as the old one died and have now Wi-Fi in my home. My newer PC takes advantage of the Wi-Fi but my old PC does not.The new modem does not have a connection for the blue cable (Marked USB in back of modem) that was connecting the old PC to the internet.After reading online I think I need a USB wireless adapter but I am not sure on what I need exactly as my online searches return too much stuff (I went on Ebay).
View 3 Replies
View Related
Mar 7, 2012
I have already successfully upgraded the firmware to DD-WRT with no problems.What I want to do is have the D-Link DIR-601 Router set as a Repeater Bridge because I am trying to expand my wireless signal to dead spots in the house.I have NO SECURITY enabled on my NetGear Router and I am still unable to successully setup the D-link DIR-601 Router as a Repeater Bridge.
View 2 Replies
View Related
Dec 31, 2012
i am using dlink DIR-600L wireless router, the problem is i can connect to any device only if my laptop is on, the moment i swtich off my laptop my other devices dont work on wifi
View 2 Replies
View Related
Nov 6, 2011
I recently bought a new D-Link DIR 615 but I dont get adequate range in the rooms farthest away from the router. I have an old D-Link DIR 634M router which I'm told can be used as a wireless repeater. I went through several articles that describe connecting the two routers through a LAN cable. However is there a way to do the same without using a cable of any sorts?
View 1 Replies
View Related
Jul 26, 2011
I have Dlink N300 router and also WRT54G2 router now with DD-WRT firmware, configured as a repeater.I have a PPPoE connection through Dlink router and want to extend signals farther, hence want to use Linksys (WRT54g2) as a repeater.I have set up the linksys as repeater but dont know how to check if its communicating with my Dlink and also I not able to get internet connection from the repeater.
View 5 Replies
View Related
May 8, 2012
I bought the e4200v2 and would like us my old router wrt-160nv2 as a Repeater can I do this.
View 5 Replies
View Related
Feb 15, 2013
I have a new internet router linksys EA2700 Firmware Version: 1.0.14, the wireless signal doesn't cover the whole house so I like to extend the wireless signal using my old router Dlink DSL-2750U as Access point, I configured the two router as following but yet didn't work.
Linksys
DHCP: enabled,
IP lease range 192.168.1.100 to 150
Wireless SSID, Security Mode, Passphrase, Channel Width and Channel number same as Dlink
Dlink:
DHCP: disabled
AP Mode: Access point
Bridge Restrict:Enabled
Remote Bridges MAC Address: is the linksys MAC.
And I removed the Layer2Interface and WAN old configuration.
View 3 Replies
View Related
May 14, 2012
I have here a canyon wireless router. do you know where I can find online a tutorial or manual on how to configure a wireless router so that it acts as a repeater?
View 3 Replies
View Related
Jun 24, 2011
I want to make password for my dlink wireless
View 1 Replies
View Related
Apr 22, 2011
I have an issue with my work laptop connecting to my home network. It will connect to the internet but only briefly and then the connection is dropped. I reset or repair the connection and I can get it to re-connect but then it drops again after only a minute or two. I tried to connect it to the router directly with a cable (turned wireless off) and had the same issue. This laptop has no issues connecting wirelessly at work or to other wi-fi networks I have tried. I have another laptop in the house that has no issues connecting to the home network & internet. The issue seems only to be with this laptop at home. The laptop is a Dell using 64 bit Vista. The router is a D-link DI-524, 802.11g router and I have a DSL connection.
View 1 Replies
View Related
Nov 15, 2011
i just happened to have a spare DIR 601 and I already installed DDWRT on it. Now my question is can make this as a wireless bridge or repeater? with only using the signal of my DIR 655 router upstairs?
View 4 Replies
View Related
Apr 7, 2013
how to make a wireless router work on a lan network, where my ISP has set the TTL to 1 so i can`t use a router.
View 3 Replies
View Related
Feb 1, 2013
Region : Peru
Model : TL-MR3040
Hardware Version : V1Firmware Version : latest
ISP : Movistar
Is there any chance to make work HUAWEI E303C with MR3040?I know this model is not in the compatibility list, but when I try connect this modem with the router, it can be identified but it cant be connected. On the logs it appears that there is a problem with dial, APN, but I'm sure I'm introducing the correct values?
View 1 Replies
View Related
Aug 24, 2011
Is there any way I can make the cisco 857 router work on ADSL over ISDN?
View 2 Replies
View Related
Apr 8, 2013
I find that within my apt I can only get about 32% signal from my shaw Wi-Fi router. They don't support what I want to do.. adding my d-link router to boost or repeat the signal.
View 1 Replies
View Related
Feb 4, 2011
I want to use a D-link WB-2310 wireless router to receive a wireless signal. Downstairs, connected to a cable modem (11MBPS), is an intel iMac running 10.4 that can send out its own wifi signal (internet sharing). Upstairs will be a PowerPC G5 Mac running 10.5 that has no wireless card...I was hoping I could use the router in place of a wireless adapter.
View 3 Replies
View Related
Apr 12, 2011
I am trying to use a NETGEAR 54Mbps Wireless ADSL2+ Modem Router (Model DG834G v4) as a repeater to extend the WiFi I currently have off another NETGEAR router in my house to my office which is a seperate building in my backyard (75 feet away depending on where I place my router exactly).I've scoured the vast internet for specifics with this particular router. I am fairly well versed in computer-type verbage and usage, but networking is an alien language to me.
View 1 Replies
View Related
Oct 13, 2011
I have a dir-615 D-link router. It is well installed with my main computer that is an old XP windows system. I tried to create a network to give acces to my friend laptop when he comes home(he has a mac). I setuped a network with a name and a password. So my friend could find the network name and i gave him the password, but it never works. Another friend of mine also came with an older iBook laptop and the same thing happens.
View 5 Replies
View Related
Jan 28, 2012
How to install single port D-link wifi router through Modem "Single Port Wifi Router"
View 1 Replies
View Related
Nov 30, 2011
is it any possibility to set my router WRT54G V2.2 as a wireless repeater? and does any manual for this exist?
View 3 Replies
View Related
Jun 12, 2012
I have set up my linksys in my main hall, i get a decent wifi signal in my room. But i get very very poor signals on my phones (bb9780 and Samsung S2). I bought a Huawei WS320 wifi repeater. how to connect these two so that i can get a strong enough signal in my room ?
View 2 Replies
View Related
Nov 18, 2012
is it possible to connect Cisco Ap-1242AG with non-cisco wireless router to work as repeater?
View 1 Replies
View Related
Nov 4, 2011
i want to setup a temporary lan for gaming purposes in my school for a event but my school has only a free 8-port switch but i need to connect 10 pcs together i have a dlink modem but its kinda old its a dsl-2640t it has 4 Ethernet ports on the back and if pcs are connect to that they can detect each other.... can i brige the modem and the switch together.
View 4 Replies
View Related
Feb 23, 2013
For some reason I can no longer make Wi-Fi calls with my E1200 router. I have checked with my ISP and T-mobil. They both tell me that everything on their respective ends is working correctly. The only piece of the equation is the router.
View 5 Replies
View Related
Oct 13, 2011
I have a client that is using a DIR-655 router. He uses Cisco VPN to access his work PC. At first, the only way we could get this to work was by skipping the router and plugging directly in to the modem. This is not ideal - so after receiving no response here to this question - I did the following - I put his PC (by IP) in a DMZ. This has done the trick - but will only work until the next time his IP address changes.
View 8 Replies
View Related
Nov 20, 2011
I have a new techni colour wifi router TG582n which has a usb cobnnection in the side. I also have a new Samsung 400 gig external hard drive can these be linked to make a wifi hard disc store.
View 2 Replies
View Related
Dec 27, 2012
Is there any way to make networks hidden through the WiFi Smart software? I have a Cisco Linksys E4200V2. I have gone through everything to try figure out how to make my S.S.I.D. to not be broadcasted, but seems like the only way to make it hidden is to use the Origonal Firmware make it as hidden, then install the New Firmware and software. Seems like Cisco may have missed this option. I do know a lot of people would prefer their Networks hidden for a little security. I know it isn't much, cause if someone wants to get that info it's not hard to get it. But for people who don't know or don't want to waste all the time to find the Hidden Network name can be turned away, for going through that extra step.
View 6 Replies
View Related
Jan 23, 2013
Our customer setup requires an outdoor WAP (the main WAP) and two wireless signal repeters (that will be WAP2000). The repeaters will be powered over the Ethernet only and will be connected to the same switch as the main WAP (unknown vendor). My question is:
Will a WAP2000 work smoothly as a repeater when it's powered over Ethernet only and connected to the same switch as the main WAP is?
I noticed that WAP2000 connected this way was sort of 'lost' in deciding to repeat a signal or work as an independent wireless access point. The problem was immediately removed once the repeater was disconnected from the switch and powered from an outlet. I am not sure whether it was wrong addressing setup or something else that was needed to check/uncheck.
View 4 Replies
View Related
Nov 16, 2011
i have an old hp ipaq pocket pc (really old) but a long time ago i used to have it set up wirelesly to the internet via a D-link DCF-650 W cf card. But i can't get it to find and wireless connects. The card lights aren't flashing there just on they used to flash when I would send or receive data. I can hook to internet through my computer but i want it wireless. I found some drivers for card that i installed through win7 on computer, but how do i make it install to my pocket pc where the card is at?
View 2 Replies
View Related