Using Dlink Wb-2310 Wifi Router As Receiver?

Feb 4, 2011

I want to use a D-link WB-2310 wireless router to receive a wireless signal. Downstairs, connected to a cable modem (11MBPS), is an intel iMac running 10.4 that can send out its own wifi signal (internet sharing). Upstairs will be a PowerPC G5 Mac running 10.5 that has no wireless card...I was hoping I could use the router in place of a wireless adapter.

View 3 Replies


ADVERTISEMENT

DLink WBR-2310 Router Don't See Modem But Switch Does

May 24, 2012

We setup a home network in our new house but we have a problem with limited connectivity in specific configuration.

There is few situations to describe the problem :

1. If I connect my computer directly to the modem I can access to the internet. (modem --> computer = internet OK)

2. If i connect the ethernet cable (in the wall) between my modem and RJ45 jack in the living room and connect my computer directly to the RJ45 I can access to the internet. (modem --> cat6 cable in the wall --> computer = internet ok)

3. If I connect my router directly (without the cat6 cable in the wall) to the modem and my computer to the the router I can access to the internet. (modem --> router --> computer = internet ok)

4. If i connect the ethernet cable (in the wall) between my modem and RJ45 jack in the living room and connect to router to the RJ45 and my computer to the router I CANNOT access to the internet. (modem --> cat6 cable in the wall --> router --> computer = internet access problem)

5. If i connect the ethernet cable (in the wall) between my modem and RJ45 jack in the living room and connect to a swith to the RJ45 and my computer to the switch I can access to the internet. (modem --> cat6 cable in the wall --> switch --> computer = internet OK)

With those tests I am not able to figured out what is the problem... router is working in situation #3. cable in the wall is ok in situations #2 and 5. How to make my router working when connected to the RJ45 jack in the living room.

There is my component :
Router --> D-Link WBR-2310
Switch --> Trendnet TE100-S5
Modem --> Thomson DCM475
Cable in the wall --> Homemade with 568A standard in both end.

View 5 Replies View Related

Close Dlink Wbr 2310 Router So People Have To Use Password?

Nov 23, 2011

I have a dlink wbr 2310 router and i keep on getting hit offline on my xbox 360 because my parents set my router on open connection so anyone close enough to pick it up can use it and I'm trying to close the connection so they would have to know my password to use it?

View 1 Replies View Related

Dlink WBR 2310 No Connection?

Aug 30, 2012

I was assisting a friend by trying to set up a wireless password on their network, I have no clue why they didn't have one, and when it did the normal resetting machine protocol after the password setup we lost all internet, we can connect to the wireless network fine but it has no internet. The modem has internet connection as when I link via ethernet I can connect to the internet. DHCP is not enabled on the router, I'm not sure if I have to set that setting on the modem? or frankly how to do that either.

View 7 Replies View Related

Wifi Receiver To Pick Up Signal 900 Ft Away?

Jan 7, 2013

I am in a community that has a wifi system and the club house is about 900ft awayWhat king of a receiver would I need to reach and receive that signal?

View 2 Replies View Related

Use A High-speed Usb Port For Wifi Receiver?

Apr 20, 2012

I have an old PC in my Buenos Aires apartment, connected to WiFi by means of a receiver module - because the modem is across the room and too far to connect by cable...But I get the message that the device would work more efficiently with a high-speed USB port...If I installed a high-speed card inside the computer, would this improe my Internet speed? It hangs up quite a bit... but then again, it's a Pentium III, so there's that limitation too.

View 1 Replies View Related

Capturing High-quality Audio And Send It Over Wifi To A Receiver?

Feb 16, 2011

capturing high-quality audio (44.1 kHz, 12+ bits) and send it over WiFi to a receiver.

Microphone->[Audio module+Transmitter] -> Wireless Link -> Receiver

View 2 Replies View Related

Dir-615 Dlink Router - How To Setup Wifi Home Network

Oct 13, 2011

I have a dir-615 D-link router. It is well installed with my main computer that is an old XP windows system. I tried to create a network to give acces to my friend laptop when he comes home(he has a mac). I setuped a network with a name and a password. So my friend could find the network name and i gave him the password, but it never works. Another friend of mine also came with an older iBook laptop and the same thing happens.

View 5 Replies View Related

Dlink Wifi Router Single Port Setup

Jan 28, 2012

How to install single port D-link wifi router through Modem "Single Port Wifi Router"

View 1 Replies View Related

Make Dlink Dsl-2640t Router To Work As Wifi Repeater?

Sep 4, 2012

make dlink dsl router 2640T to be working as repeater which will be able to receive wifi signals. I've seen one guy using the same dlink dsl-2640T as wifi signal repeater where he was successfully able to receive wifi signals[CODE]

View 5 Replies View Related

Linksys Wireless Router :: WBR-2310 Access Different Network For Internet

Aug 2, 2012

I have a Free Community WiFi that I can access from the edges of my house, but not from anywhere inside the house. My personal Internet connection is out due to the fact our bill trippled for some reason we can't figure out 2 months ago without telling us. We've had an auto payment sent every month for just over what it should be. So until I get this sorted out with the ISP I have to use the community WiFi. I would like to be able to use the internet from somewhere other than the wall in my kitchen.
 
So, I have a number of Routers, 2 Actiontec Q1000s, but only 1 power suply, a D-Link WBR-2310, D-Link DIR-601 & a few other ods & Ends including a 12DB Amped Wireless & An 8DB Hawking Tech antennas.What I want to do is to use 1 router to connect to the CommunityShared Network, A wired connection to another router (Preferably the Q1000 as it's already setup for my Home Network) & that router to serve my Home Network, preferably over the WAN port if possible, but I can run VPNs on each device for a week if I have to.
 
Right now I have one computer setup in the kitchen with a High Gain Antenna conected to a Atheros SUB-362 EXT USB WiFi card, (This computer gets 7Mbps Down & 9Mbps Up) then the built-in WiFi card connected to my Home network with a Static IP, The Q1000 set to use that IP as the Gateway. I can get about 200Kbps max on devices connected to the Home Network. But the biggest problem is that my old Atheros card disconnects randomly when accessed from one of the devices on the home network. I'm fine with a ThirdParty Firmware Update on the D-Links if necessary.When I look online I only find posts about how to extend a network using a second router or how to use a specific router to repeat or bridge.

View 1 Replies View Related

Replacing D-link 604 With Ebr-2310?

Apr 3, 2011

Can I replace my Replacing D-link 604 w/ D-link ebr-2310 ?

View 4 Replies View Related

Convert Belkin (F5d7234-4) Router Into Wireless Receiver?

Nov 12, 2011

I have a Belkin f5d7234-4 lying around at home. I also have a Panasonic TV which requires a proprietary wifi donge to get a wireless signal, so my question is, can I use the router to recieve my house Wifi (broadcast by my new NetGear Router) and send it out through its Ethernet port to the TV?

I checked, the router doesn't have ddwrt support, I'm new to hacking around with routers and networks, so I don't know how to do this, I see how it is logically possible

View 1 Replies View Related

D-Link WBR-2310 No Internet Access?

Sep 19, 2012

I have a D-Link WBR-2310. It was working just fine until couple days ago. The problem lies with *No Internet Access* that using both wired and wireless. I havereset, shut it down for awhile. Reset the whole device still nothing. I do not have any clue what has happened. I have come up with disabling IPV4 or something? No idea how to do that and if thats right how do I go on to do it.

View 7 Replies View Related

D-Link WBR-2310 No Wired Connectivity?

Jul 8, 2011

I have an Internet Connectivity problem which I believe was caused by resetting our D-Link WBR-2310 router. We have a strange, perhaps illogical network setup in our office. Although it was set up before my time, I have figured it works as follows:

(1) A wired/wireless router (let's call it Router A) is connected directly to the DSL modem.

(2) An Ethernet cord runs from this router to a 5 port switch.

(3) 4 cords run from the switch to individual workstations. These computers obtain their IP addresses automatically.

(4) 1 cord runs from the switch to another wired/wireless router (let's call it Router B).

(5) Two cords run from Router B to individual workstations (let's call them Workstations C). These computers used permanent IP, subnet mask, default gateway, and DNS server addresses. I understand that this was done because they could not obtain their IP addresses automatically.

The problem I've caused seems to stem from me resetting Router B to the factory settings while trying to secure its signal and changing its IP address from 192.168.0.1 to 192.168.1.1 (in order to avoid conflict with the modem which has the same IP address). Once I did that, Workstations C could not access the Internet.

I have tinkered with the TCP/IP settings for Workstations C (e.g. by changing the default gateways to the Router B's new IP address), but it doesn't work. What else should I be doing?

View 2 Replies View Related

Free Dlink Ap Disappear From List Of Available Wifi

Feb 18, 2013

I got a wireless HP all-in-one PC and was able to connect to the Internet via the free Dlink wi-fi access point. Dlink no longer appears in the list of available networks. The network adapters are fine. I'm running Windows 7.

View 3 Replies View Related

Dlink Dir-657 Keeps Losing Internet Connection On Wifi Devices Only

May 27, 2012

Dlink Dir-657 keeps losing internet connection on wifi devices only . the connection remains to the router but no internet .if I disconnect the connection i am unable to reconnect to the router until i reboot it. My internet remains on my network cabled devices .I am running on an empty channel 3 , usually happens 20 to 60 minutes after the router is up . Dlink sent me a replacement refurbished one and this one is doing the same thing . I owned the original one for about 5 months with no problems at all ,no new electronics in the house and have not changed the placement of the router .

View 4 Replies View Related

Dlink N 150 - Lan Connection To Wifi Adapter To Access Mobiles

Nov 23, 2012

i have my pcwhich doesn't have wifi capabality so i purchased D-Link N 150 Wireless USB Wifi Adapter,it possible share internet to my phone via wifi adapter.

View 1 Replies View Related

Get Dlink And Have Wifi From My Cell Phone To Laptop For Internet?

Nov 17, 2012

Can i get a d-link and have wifi from my cell phone to laptop for internet

View 4 Replies View Related

Dlink Dir-600l - Wifi Doesn't Work When Laptop Is Switched Off?

Dec 31, 2012

i am using dlink DIR-600L wireless router, the problem is i can connect to any device only if my laptop is on, the moment i swtich off my laptop my other devices dont work on wifi

View 2 Replies View Related

Two Routers (cisco E1200 / Dlink Dsl 2750b) Separate Wifi Networks - One Internet Connection?

Dec 12, 2012

I am trying to set up two routers so that I can offer free wireless connectivity via three AP's in three adjoining rooms on a first floor and secured wireless and wired network connectivity in upstairs offices. The setup is like this:

Verizon DSL connectivity..static IP

The gateway modem/router is a Verizon DLink DSL 2750B with three ports connecting to three wired Access Points in three first floor adjoining rooms, and the 4th port connecting to a Cisco E1200 (wireless and ethernet router) located next to the Verizon Dlink. I would like the Verizon DLink to give open wireless connectivity via the access points and also connect to the adjacent E1200 router.

I would like the Cisco E1200 to offer secured wireless and ethernet connectivity to the upstairs offices. (connecterd to the Cisco E1200 is a 24 port Netgear switch.)I have spent considerable time talking with Verizon and Cisco/Linksys but have not been successful in just how to set this up.A former tech actually did have this setup but for what ever reason the settings were reset to factory defaults with no written record as to the necessary settings.

View 4 Replies View Related

Setup 2 Routers DLink DIR-655 / DLink DI-524 On Same Network?

Apr 25, 2012

I have been putting up with rubbish wireless signal down one end of my house now for quite some time. So I thought I have a spare wireless router and I could put it down there but I am sure ts not as easy as just plugging it and away you go.

Network Setup

Router 1 is a D-Link DIR-655
Router 2 is a D-Link DI-524

I need to know how to setup Router 2 so it basically become just a wireless access point

View 6 Replies View Related

Cisco WAN :: Convert Multicast Streams (224.0.0.1:1234) To Unicast (Receiver 10.0.0.1:1234) At Router Level

May 26, 2013

Is it possible to convert multicast streams (224.0.0.1:1234) to unicast (Receiver 10.0.0.1:1234) at the router level.

View 4 Replies View Related

Laptop Linked To Dtv Receiver

Jan 5, 2011

I recently linked my dtv receiver to the internet through my laptop. My question is, since I'm now sharing the connection, do I need to make any adjustments in the "network and sharing center" to keep sensitive info on my laptop safe?I do have Norton Internet Security.

View 1 Replies View Related

Can't Connect To Direct TV HD Receiver

Jul 23, 2011

Just updated my DTV to a HD receiver which has the ability to access movies/shows via internet so I hard wired my belkin router to the TV receiver and I can't get it to connect. The router light does not go on showing me I am not connecting to the TV receiver. When I go into the DTV receiver it reads all my IP address and has an OK behind them, but says there is an error and the internet is not connected. When I plug the same cable into my PC or my laptop the light on the router does come on. Also my iphone does receive WIFI via the same router. I called DTV and they said everything on the receiver is correct. I called my router folks and they said everything is correct and that it must be the DTV receiver. I've been using this router for several years and their tech guy sounded like he knew what he was doing. how I can get the router to recognize the TV receiver?

Here are my router settings: I used the WAN IP info in my TV receiver. Home| Help| Logout Internet Status: Connected LAN SetupLAN SettingsDHCP Client ListInternet WANConnection TypeDNSMAC AddressWirelessChannel and SSIDSecurityUse as Access PointWireless BridgeFirewallVirtual ServersClient IP FiltersMAC Address FilteringDMZWAN Ping BlockingSecurity LogUtilitiesParental ControlRestart

[Code].......

View 8 Replies View Related

VPN Address For Satellite Receiver?

Mar 7, 2012

I need a vpn address for Digital satellite receiver TITANIUM HD 20000.I have tested several address which are working on my pc windows but my satellite receiver can not connect to vpn server. what should i do?

View 5 Replies View Related

2Wire 2701HG As Wi-Fi Receiver?

Mar 3, 2012

Old Configuration:

A 2 Wire 2701HG-B DSL MODEM/Router Upstairs
Wired into 2 PCs upstairs
WiFi to a PC Downstairs.

I killed the DSL service and got U-verse, but that added a new Modem/WiFi downstairs. I still have the 2Wire upstairs, but it has no phone connection.Can I use the 2Wire to "Receive" and "distribute" the WiFi signal from downstairs?

I don't see how to turn off the DSL MODEM. If I put in the ID and Password for the WiFi router downstairs into the 2Wire upstairs, will it "Login" or will it conflict? Are there special settings for the PCs to access the U-Verse router through the 2Wire?Basically, I want to know if the upstairs 2Wire can receive the U-verse signal and convert it to wired signal for the 2 upstairs PCs.

View 1 Replies View Related

Connecting HD 9000x 2USB TV Receiver To Wireless?

Sep 20, 2011

I have a Class HD 9000x 2USB TV receiver. It comes with a wireless connection. I am not able to connect it to my wireless router. When I try to connect it to the wireless router it says "No Wireless device" Although all other wireless devices (Labtop, Mobile) are working fine. I think there are steps to activate the network connection on the receiver.

View 15 Replies View Related

Netgear WNCE2001 Signal To Satellite Receiver

Mar 4, 2011

I am sharing wifi with my sister from apartment directly above hers...I can get the wifi and use it for my laptop/computer but have been having trouble keeping it stable for to use it as an internet connection for my satellite.I bought a Netgear wnce2001 (wifi to wired) and it works ok about half the time....the other half the signal is simply to weak to even register the IP address on my satellite receiver.Is there anyway to increase the signal on my end...you know, without having to add a bunch of new gadgets?

View 6 Replies View Related

Setting Up Bridge Mode To A Satellite Receiver?

Mar 5, 2011

i want the Satellite receiver to be wireless.i have a I-Link 9000 Plus Satellite reciever which has an ethernet port , where the buffalo router will be connected. (Buffalo WHR-HP-G300N Firmware: DD-WRT v24SP2-EU-US My main router is the Linksys Wireless G router WRT54G2 V1.5.

View 2 Replies View Related

Windows 7 Can't See Denon 2113 Av Receiver For Streaming

Jan 31, 2013

I have a denon avr2113 receiver wired to my router on my home network. It has internet access and shows up on the router, but it doesn't show up on my windows 7 computers, which are wirelessly connected to the same network. Any ides? Streaming is allowed on windows

View 1 Replies View Related

How To Hardwire Wireless Security Camera With No Receiver

Apr 5, 2011

I have no system. I bought just the cameras @ a yard sale 4 a $1. I want @ hard wire them @ PIP on my TV via RCA cable.

View 12 Replies View Related

How To Use Yamaha Rx-v867 Receiver In Wireless Network

Nov 4, 2011

Just picked up the Yamaha rx-v867 receiver a few weeks ago. It has an ethernet port so that it can do internet radio (Pandora, etc). Not close enough to the router to go wired. I am getting an old 802.11b router from a family member today. Can I use this as a bridge to send music over the wireless network to the receiver? What steps to successfully setup?

Usually I set up wireless networks with laptops or pc's with wireless cards.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved