Dlink Wifi Router Single Port Setup
Jan 28, 2012How to install single port D-link wifi router through Modem "Single Port Wifi Router"
View 1 Replies
ADVERTISEMENT
Dir-615 Dlink Router - How To Setup Wifi Home Network
Oct 13, 2011I have a dir-615 D-link router. It is well installed with my main computer that is an old XP windows system. I tried to create a network to give acces to my friend laptop when he comes home(he has a mac). I setuped a network with a name and a password. So my friend could find the network name and i gave him the password, but it never works. Another friend of mine also came with an older iBook laptop and the same thing happens.
View 5 Replies View RelatedCisco Firewall :: ASA 5505 - Setup Single Port Exclusion For Static NAT?
Sep 20, 2012I have been using static NAT to map between a single server behind an ASA 5505 and a single public IP address. In other words, I've been doing this:
object network NAT_ME
nat (inside,outside) static interface
Now I would like to start using the clientless VPN feature of the ASA, so I of course don't want that particular port forwarded to the server. Is there a way to define such an exclusion? I've tried several things, including setting up a separate NAT rule to direct that port back to the ASA's interface, without luck.
If that is not possible, what configuration would I need to move to in order to get the behavior that I want? It is important that all (non-VPN) traffic is passed exactly as it arrives at the firewall (whether it is coming from internal or external), with the exception of changing the IP address (i.e., I need static port mappings for some of my services).
Setup 2 Routers DLink DIR-655 / DLink DI-524 On Same Network?
Apr 25, 2012I have been putting up with rubbish wireless signal down one end of my house now for quite some time. So I thought I have a spare wireless router and I could put it down there but I am sure ts not as easy as just plugging it and away you go.
Network Setup
Router 1 is a D-Link DIR-655
Router 2 is a D-Link DI-524
I need to know how to setup Router 2 so it basically become just a wireless access point
Dlink Dir-655 Router - Unable To Run ATT Setup Disk
Jul 20, 2011I have a dlink dir-655 router and an action tec dsl modem on windows 7. I connect with ethernet to the router for my cpu and use the wireless for the rest of the house. I used to have this working flawlessly but ever since I moved I've had trouble, I also just bought this computer so I was hoping for a clean start. I set up the modem and put in the ATT p/w and user name and installed the router drivers and set it up for PPPOE with the correct passwords but it only works when I connect my cpu directly to the DSL modem. I'm really struggling to figure out what could be causing this. Does the router need to be in some sort of bridged mode or something? I didn't run the ATT setup disks on this new cpu b/c I didn't think I would need to and I don't like putting their crummy software on my cpu.
View 7 Replies View RelatedWireless :: USB Printer Setup On DLink N 2760 Router?
Sep 22, 2011connect usb printer to d-link n2760 router i plugged in the printer diagnsotic failed
View 2 Replies View RelatedUsing Dlink Wb-2310 Wifi Router As Receiver?
Feb 4, 2011I want to use a D-link WB-2310 wireless router to receive a wireless signal. Downstairs, connected to a cable modem (11MBPS), is an intel iMac running 10.4 that can send out its own wifi signal (internet sharing). Upstairs will be a PowerPC G5 Mac running 10.5 that has no wireless card...I was hoping I could use the router in place of a wireless adapter.
View 3 Replies View RelatedMake Dlink Dsl-2640t Router To Work As Wifi Repeater?
Sep 4, 2012make dlink dsl router 2640T to be working as repeater which will be able to receive wifi signals. I've seen one guy using the same dlink dsl-2640T as wifi signal repeater where he was successfully able to receive wifi signals[CODE]
View 5 Replies View RelatedLinksys Wireless Router :: Single Port Forwarding On WRV210?
Mar 5, 2010How to forward a single port to a different port to a specific computer for the WRV210 router?
I would like to forward port 10100 to port 25 to my mail server. There are times when our people are at a hotel and they block port 25 and I have done this in the past on a BEFSR11 and BEFSR41 router. There does not seem to be a Single Port Forwarding setup page and the Port Forwarding setup page only allows you to forward a range to a specific computer, it does not give you a different port you can assign an incoming port to.
I have the most current firmware revision, 2.0.0.11, and Hardware Version WRTR-221G_V01.
Linksys Wireless Router :: Single Port Forwarding With E2000?
Jul 15, 2011I was wanting to port forward a port that was 25565 for a game of mine, but everytime I try it won't work.
By the way, it's 7AM and I didn't sleep yet so i'll explain more detailed in the morning.
I'm using a E2000 Router.
Linksys Wireless Router :: E4200 - Use Hub To Connect NAS And Printer To Single USB Port?
Dec 28, 2011E4200 -
Can I use a USB hub to connect NAS ~and~ a USB printer to the single USB port?
Linksys Wireless Router :: E4200 / Max 15 Single Port Forwarding And Range?
Nov 3, 2011At the E4200 there is a limit of (free to make) 15 Single port forwarding and 15 port range forwarding to fill in.I get as suggestion that I must give up a total range of ports where all the ports I use where in.But for security reasons I will not do that.
View 1 Replies View RelatedLinksys Wireless Router :: WRT160N - Cannot Save Single Port Forwarding Settings
Sep 6, 2011I did read the thread entitled ''WRT160N Can't save settings'', but I believe this might be different. My router is actually communicating with my computer (physically plugged in), since I can save all other settings EXCEPT the port-fowarding ones.I am trying to save settings for a gaming application in the Single Port Forwarding section of my router settings. After clicking both ''save settings'' and ''continue'', it simply returns to the Single Port Forwarding section, except everything is blank, as though nothing was saved.
Here are my specs:
WRT160Nv1
Firmware Version: v3.0.03
Here are the steps I have already undertaken:
1- Erase browser cache and cookies
2- Updated to latest firmware (v3.0.03), 10-second reset button, 20-second power cycle.
Linksys Wireless Router :: WRVS4400N Single Port Forwarding Doesn't Work
Jul 1, 2012Type: WRVS4400N Wireless-N Gigabit Security Router with VPN.I bought it last week. Its single port forwarding has an issue. I can only use that function for a couple or hours. Then the forwarding does not work. I have to reboot the router to make it available again.
View 1 Replies View RelatedCisco Switching/Routing :: 1700 - Setup For Connecting Router AUX Port To Switch Console Port
Feb 26, 2012I was looking for a way to connect an AUX port from a 1700 router to a 6500 switch module console port, to see the output of the Switch's on the 1700 router, in case there is a network downtime, I could see what's going on in the switch, what cable should I use ? Also, is there is any kind of documentation for this type of config what have I seen is very few info.
View 2 Replies View RelatedWhat Is The Best Security Setup For Dlink N150
Oct 16, 2011What is the best security setup for this model!
View 1 Replies View RelatedRouters / Switches :: Networking Setup With DLink DL-604
Apr 8, 2011I had this small internet cafe with 15 units pc. and browsing the web is not that stable. i have to unplug the internet modem everytime i can't connect to the internet.I think it has something to do with the settings that was in the router since it was just configured by a tech guy which i think not 100% sure of what he did, though it can connect to net for sometime but most of the time it is down.
View 5 Replies View RelatedCisco Routers :: Setup DMZ With RV042G And Single IP
May 11, 2013I'm trying to set up a single web server in a DMZ using the RV042G and the docs seem woefully inadequate to explain how this is accomplished.
I've attach a picture of my setup..
I'm assigned a single Public IP.. in the example I've used 172.16.5.22 and so I've set the WAN interface for static IP.
The DMZ port is not obvious how to set up.. So I've chosen to define a private subnet and throw the web server in there. As I activate the DMZ, I specify a "subnet" and its address as 10.10.10.1, which I'm assuming goes to the DMZ/WAN port. I assign my webserver the address 10.10.10.3.
I leave the Access rules in their default condition.
I am a little unsure as to how to setup the static IP info for the web server.
Gateway: 10.10.10.1 ?
DNS: 10.10.10.1? or 172.16.5.1?
Problem #1
=========
My first problem is that the webserver cannot access the Internet. I get a timeout when I open the browser. I've tried every address there as the gateway and DNS..
Problem #2
========
If a person on the WAN side is attempting to connect to 172.16.5.22:80, how does the RV042G know to send it to the 10.10.10.3 device? It doesn't know what address the webserver is assigned; I just gave it a 10.10.10.1 address as the subnet address.
I think I'm missing something, conceptually here.
Can, in fact, you use the RV042G in this fashion with only a single public IP address? There is almost no information on how the router actually routes traffic when you choose either 'subnet' or 'range' (where the DMZ is in the same subnet as the WAN)
Two Internet Connection (same ISP) To A Single LAN (8 Computers With Server Setup)
Aug 9, 2012I have 2 internet connection with the same ISP, SmartBro 2mbps.We have 7 computer unit plus 1 unit that will serve as the server.Is it possible that we combine the two internet connection into just one LAN so that all PC's will see each other. Mainly for network gamesBTW, we don't have any routers or switch yet.
View 5 Replies View RelatedDLink DIR-601 - ICS And Port Forwarding
Nov 18, 2011I have a computer connected through wifi to the internet.I then turn on the computer into ICS mode and connect that to my PS3/Xbox.I'm trying to get an OPEN NAT type but just can't seem to get it working.I've read a few different pages and have tried some things but it's never worked.I've heard of bridging connections and the sort but I'm not familiar with it. I just want to get an OPEN NAT on my PS3/Xbox.
View 10 Replies View RelatedDlink Switch Loses Port Connectivity?
Dec 22, 2011I have Cyber cafe, And i'm having a problem with My 24 port Dlink "DES 1024d" switch, which has been misbehaving for few months, it looses connectivity to a pcsometimes.....when i reboot the pc, then it works again, But it keep losing connectivity to the other pc's, not at the same time, every time loses connectivity to a different pc.
View 5 Replies View RelatedWireless :: Connect To Wifi Using A Single Pc?
Feb 12, 2011i have a wifi laptop. Is it possible with a router to connect to my bb wirelessly without using a host pc?
View 3 Replies View RelatedHow To Set A Priority Signal In Single Ssd Id In Wifi
Aug 30, 2012How to set a priority signal in single SSD ID in wifi ?
View 1 Replies View RelatedRouters / Switches :: Dlink Model DI-624 / Arris TM502GI Modem Setup - Connecting Cables?
Feb 6, 2013My router is a Dlink Model DI-624
My modem is an Arris Model TM502GI don't remember how to set it up. That is what cable goes where & is there anything to do on the PC With WiFi for it to connect with my router?I am 70 years old with a limited knowledge of computer and other electronic gadgets.
Free Dlink Ap Disappear From List Of Available Wifi
Feb 18, 2013I got a wireless HP all-in-one PC and was able to connect to the Internet via the free Dlink wi-fi access point. Dlink no longer appears in the list of available networks. The network adapters are fine. I'm running Windows 7.
View 3 Replies View RelatedHow To Make Computer Listen To A Single Port
Oct 5, 2011i want my computer to make connections to only a single port (53 in this case)......how can i do this? i am using a wireless broadband data card. i am using windows 7 ultimate. is there any way to make such settings in my pc and if so how do i set or make the settings so that my computer will only make connections and also listen to the single port 53?
View 9 Replies View RelatedCisco WAN :: Single Port Forwarding For RVS4000?
Aug 29, 2011I cannot add or modify the informations in the Single Port Forwarding . I get a message saying: Invalid Character(s) found. All characters are good. I get the same message when only click on the "SAVA" button. I have the latest firware V2.0.2.7
View 1 Replies View Related9090 / How To Forward A Single Port In Linux
May 6, 2013I have two machines in my network (A and B), where A is the one directly accessed from outside when calling my IP address and B is a very powerful one which should serve for very intensive tasks.
I would like to forward a certain port, e.g. 9090, from A to B, so any request sent to A on port 9090 is directly forwarded to B.How can that be achieved?
Port Forwarding Through A Three Router Y Setup
Dec 25, 2011I'm finally jumping in over Christmas break to set up a Y network with three routers. I run a side business repairing and cleaning viruses/malware from PCs and would like the business subnet not to be able to mix with (and possibly infect) the "home" subnet.Before I knew what I was doing, I set up a simple two router "chained" network by hanging an old SMC router off my main Airport Extreme router, but I've since learned that's not ideal, since the "work" network machines can see everything on the "home" network. So, here's what I want to do. I want to put the new third router right after my cable modem (ISP). I want to keep my Airport Extreme and all devices attaching to it (home subnet) off one LAN port of this new router and my old SMC router off another LAN port of the new router (the test subnet). Currently, the IPs are: [code]My concern in setting up a "Y" configuration is that I have some wireless IP webcams on the Airport Extreme that are using port forwarding (both UDP and HTTP) so I can view them from wherever I am on the Internet, not just from within my home network.
What's the best way to make sure the port forwarding from devices on the Airport Extreme subnet works through the "new" router and out through to the Internet? Do I have to open the same ports on the new router? If so, does anyone have an example using the addresses above? Should I just put the Airport Extreme in the DMZ of the new router (so everything is just passed through - or will that allow my test subnet to see the home subnet? Some other way?
Dlink Dir-657 Keeps Losing Internet Connection On Wifi Devices Only
May 27, 2012Dlink Dir-657 keeps losing internet connection on wifi devices only . the connection remains to the router but no internet .if I disconnect the connection i am unable to reconnect to the router until i reboot it. My internet remains on my network cabled devices .I am running on an empty channel 3 , usually happens 20 to 60 minutes after the router is up . Dlink sent me a replacement refurbished one and this one is doing the same thing . I owned the original one for about 5 months with no problems at all ,no new electronics in the house and have not changed the placement of the router .
View 4 Replies View RelatedDlink N 150 - Lan Connection To Wifi Adapter To Access Mobiles
Nov 23, 2012i have my pcwhich doesn't have wifi capabality so i purchased D-Link N 150 Wireless USB Wifi Adapter,it possible share internet to my phone via wifi adapter.
View 1 Replies View RelatedGet Dlink And Have Wifi From My Cell Phone To Laptop For Internet?
Nov 17, 2012Can i get a d-link and have wifi from my cell phone to laptop for internet
View 4 Replies View RelatedCisco :: Manage Multiple Vlan From Single Port?
May 11, 2012I have Cisco L3 3560G switch which directly connected with router . i have configured Vlan 2,3 on the switch and assign port 2 & 3 respectably. I want to management both vlan 2 & 3 from from L3 port g0/10 .
View 6 Replies View Related