Linksys Wireless Router :: Way To Configure WRT120N With 3G USB Modem?
Aug 7, 2011Setting up my wrt120n ROUTER for remote view.this is becos i dont have a DSL cable modem, what i have is a 3G usb modem.
View 1 Replies
ADVERTISEMENT
Linksys Wireless Router :: Configure Pppoe On WRT120N It Say It's Connected But Cannot Access Wan
Aug 11, 2010I have configure pppoe on my WRT120N it say it's connected but cannot access wan side of the router.
View 5 Replies View RelatedLinksys Wireless Router :: Configure WRT54G As Repeater Signal Of WRT120N?
Jan 2, 2013Is it possible to configure the WRT54G as a repeater signal of the WRT120N?
View 1 Replies View RelatedLinksys Wireless Router :: Phone Gets Dead When Connect WRT120N To Modem
Aug 5, 2011i brought a new wrt120n from the retailer and when i tried to connect the modem and configure, my phone gets dead and i couldnt connect it to the internet.
View 1 Replies View RelatedLinksys Wireless Router :: Wrt120n Always Gives Error When Try To Configure Home Network Defender
Jan 6, 2013I got error message everytime i try to configure home network defender and i tried to find the solution but no luck but everytime i click and enter my email and password i get this message, i bough this router recently and the only troubles i have is with this
View 2 Replies View RelatedLinksys Wireless Router :: WRT120N / PPPoE - Bridge Modem And Connect To Internet
Dec 6, 2011I recently changed my internet connection to DSL from Cable, so now I'm using PPPoE type of connection.
Right now my router is configured as Automatic DHCP with the modem doing the PPPoE connection. All is fine and well.
Since I own a PS3, and Nat Type 3 conection is really bad for my online gaming, I would like to bridge my modem and connect to the internet through my router. That way I can properly forward my ports, use QoS and effectively get a better connection on the PS3.
I was able to successfully bridge the modem, but the PPPoE config on the router isn't able to connect to the internet.
Modem and router have been reinitialized after the configurations were changed. I do have the username and passwords, and they were properly put on the router.
Linksys Wireless Router :: Configure Apple Airport Express To Extend Wrt120N Network
Aug 6, 2011Is it possible to configure the apple airport express to extend a linksys wrt120N wireless network? if so how?
View 2 Replies View RelatedBroadband :: Linksys Wrt120n Router Behind Timewarner Modem EPX2203
Sep 15, 2012My friend changed to TimeWarner cable a while ago. I bought her a netgear wireless switch to have wireless access. She has an old laptop as well with Vista on it, and was trying to connect that to the WiFi. Let her buy the Linksys. Didnt solve the problem and he turned off the wireless security to connect the Vista laptop. That was somewhere July 2011. Since than I have setup MAC filtering to at least have the WiFi not completely open to the public.
View 2 Replies View RelatedHook Up A Motorola 2210 Modem And Linksys WRT120N Router Without Bridging?
Sep 28, 2011I'm not that great at networking, I'm pretty much a novice but I'm trying to connect a modem and router to my computer but get around bridging the modem if possible. You see, I am working with AT&T and their dsl modem access page only works for me if the modem is unbridged. If I bridge the modem, I cannot get on the page again to unbridge it while I am trying to hook up my router. When I need them to unbridge the modem, I have to stay on hold for hours. One guy even told me that he did unbridge the modem, but since my internet persisted not to work, he told me my ethernet card went bad of a sudden on my computer. I knew this was incorrect so after a few more hours on hold, I had a lady debate with me that she was not unbridging my modem since it was my ethernet card that was bad and not the bridging. Finally, laughing to herself, she unbridged the modem for me and it worked
Here is what I have: My modem is a Motorola 2210 Style: MSTATEA My router is a Linksys WRT120N
As of right now, I just have a LAN with my modem plugged in through an ethernet cord to my PC. Is there a way of me hooking up my Linksys router to my modem and PC without bridging the modem? If so, where can I find out instructions for this?
Linksys Wireless Router :: How To Configure WRT54G With DSL Modem
Jul 22, 2008I have WRTG54G with 4ports and a internet port, i have a zoom adsl modemfor DSL i wants to share DSL connection with internet port on WRTG54G but i d'nt know how to do this
View 5 Replies View RelatedLinksys Wireless Router :: EA6500 When Connect PC Directly To Modem / Configure PPPoE Connection
Mar 8, 2013I have rather huge connection at home. DL speed 80Mb, UL speed 3Mb.When I connect my PC directly to modem and configure PPPoE connection, I get 81Mbits/sec. When I connect my old ASMAX $30 router, I get 78 Mbit/sek. And I find it OK.But when I connect my EA6500 I get 28 MBits/sec. Same result on wire as on wireless connection. Of course If I enable prioritisation, I get even less, 12-15 Mbits/sec.I tried already even configuration with ASMAX as wired router and EA6500 connected to its LAN port. It gives me 50Mbits/sec.
View 5 Replies View RelatedCisco WAN :: Configure Linksys WRT120N To PPPoE Connection?
Jan 9, 2011When it comes to configuring my new Linksys Cisco WRT120N router to my PPPoE connection. I've visited 192.168.1.1 but I'm not sure what to do next. So, I've got a PPPoE connection, static IP address, Linksys Cisco WRT120N router and a terrible ISP.
How to configure my new router so that I can start using the wireless for Internet access at home.
Linksys Cable / DSL :: How To Configure WAG120N Modem / Router
Jun 25, 2012I just ordered the Linksys WAG120N modem/ router and need configuring the same on the BSNL network. Any Document or link about his Installation and configuration.
View 3 Replies View RelatedLinksys Wireless Router :: WRT120n - How To Set To 811.11n
Apr 18, 2012Linksys WRT120N to 811.11n? I set to 811.11N Only with 40Mhz, saved and reboot the device but the signal continuous in 811.11g.
View 3 Replies View RelatedWireless Not Working On WRT120N Linksys Router?
May 18, 2011I bought a new Linksys WRT120N modem which is working great, but the wireless for some reason isn't working properly. My computer is able to sense the exsistence of the connection tho. I've tried using other computers to connect to it, and still the same problem, can sense but cannot connect.
View 8 Replies View RelatedLinksys Wireless Router :: Can WRT120N Use Subnet 255.0.0.0
Mar 25, 2011I currently have a network using ipaddress 10.1.x.x and 10.2.x.x and 10.3.x.x with a subnet of 255.0.0.0 I purchased 2 of the wrt120n wireless routers for testing and find I can not use the subnet of 255.0.0.0.
View 9 Replies View RelatedLinksys Wireless Router :: WRT120N QoS Does Not Work?
Oct 29, 2009I have a WRT120N and have been trying to set up priorities using the QoS under the tab Applications and Gaming. Everytime I "Save Settings" it does not save. It refreshes the page and deletes everything I just set up.
I did Live Chat and they told me it was my router. I returned it and got another one... Same problem
Linksys Wireless Router :: How To Setup WRT120N
Sep 5, 2010I'm using an Static IP adress and i'm using wrt120n router, but to connect the internet i have plugged the internet cable in the 1,2,3,4 (doesn't matter which one) slot. So now i'm just using the wirelss part of the router without "routering" if i can say so. When i put the internet cable in the Internet slot of the router, the laptop just cant connect to internet - it shows Unidentified network without Internet Access. I don't know what type of changes i have to make in the WEB interface of the router. I think i have to set the type of the connection - now is DHCP and may be to put my IP adress, DNS, Subnet mask in the router settings, but don't know how exactly. I've tried to set up the router with the CD-interface but same thing happened - Unidentified network when the cable is plugged in the Internet (yellow) port. How to set up the router to be a router, not just a wireless switch?
View 9 Replies View RelatedLinksys Wireless Router :: WRT120N Keeps Resetting On Its Own?
Jan 18, 2010My roommate and I recently got a WRT120N to replace an older Linksys router that was exhibiting the same problems with less frequency. Indeed, the entire reason we got the new router was to fix these problems. Alas, they have become worse.Anyways, what's happening is that the router constantly resets itself. It does this every 20 minutes to an hour and doesn't seem to be related to how much traffic it's dealing with.It's not just the internet going down, it's the entire network, and not even just the wireless part. My computer has a wired connection to the router and, and I get told "A network cable has been unplugged" every time it happens. Then, if I look down at the router, I see no flashing lights, just the steady glow of the power light. It always fixes itself after 10-15 seconds, but it's very annoying. Certainly, playing games online or having a conversation on Skype is made more difficult.As previously mentioned, we replaced our older router because it was exhibiting the same behavior, but the new one does it with greater frequency. At the very least, the router does reset itself instead of needing us to cycle the power. The setup was slightly different with the old router: I was using a wireless connection with a WMP54Gv4 which I've had to disable since it bluescreens the moment it so much as sniffs a signal from the WRT120N?
View 9 Replies View RelatedLinksys Wireless Router :: Disable WPS On WRT120N?
Aug 20, 2011Is there anyway to disable WPS on the WRT120N router?
All I can do is switch the "view" from WPS to manual configuration in the management console...this doesn't actually disable anything.Maybe I don't understand WPS security, but what's the point of using a 20 character WPA2 password if WPS has an 8 digit PIN that I can't change or disable?
Linksys Wireless Router :: Can't Get New WRT120N To Connect
Mar 17, 2010I just bought a WRT120N to set up with my new Gateway Windows 7 64-bit using Cablevision cable internet. When I go through the steps from the CD to install, the wizard does not find the connection. When the internet is plugged directly into the computer, it works fine. If I have the router plugged in first and then run the install CD, it picks up the router as an existing router but I can't get it to install
View 4 Replies View RelatedLinksys Wireless Router :: Wrt120n / Wifi Keeps Going Off
Jul 2, 2012I have a WRT120N router installed in my office.All PC and Laptops are connected to it via WiFi.there are about 3 PC and 4 Laptops.The WiFi keeps going Off now and then..and comes back on in a minitue or so.
View 9 Replies View RelatedLinksys Wireless Router :: Map Page On Wrt120n?
Apr 2, 2013why are some of the lines solid & others dotted on the map page?
View 4 Replies View RelatedLinksys Wireless Router :: Cannot Connect PS3 On WRT120N
Dec 25, 2011I removed my ps3 from my network map and now i can't connect it back. How to do it?
View 1 Replies View RelatedLinksys WRT120N Wireless Router Installation Process?
Mar 27, 2011I plan on replacing my linksys BEFW11S4 wireless router with a new linksys WRT120N wireless router. Should I completely remove and unplug the old router before inserting the startup CD and beginning the installation process for the new router?
View 3 Replies View RelatedLinksys Wireless Router :: WRT120N Keeps Loosing Connection
Sep 3, 2011I have several computers and printers connected to a WRT120N router which is connected to 10mpbs DSL. The computers are all running WIN7 and are hardwired to the router. On the one PC, it keeps losing network connection. I've tried upgrading the router's firmware, reset, etc. to no avail.
I think it may be related to the same IP address being assigned to multiple machines connected to the router. Is there a way to set specific IP addresses to each item connected to the router to see?
Linksys Wireless Router :: Constant Disconnecting With WRT120N
Nov 7, 2009I don't have any problem with the wireless computers connected to the router but the wired one keep geeting disconnected. I'm loosing the internet many times a day on thiis one. Like I said the wireless is ok. My old router on my computer ( wired) was working well before I installed the wrt120n.
View 3 Replies View RelatedLinksys Wireless Router :: WRT120N Gateway Not Detected
May 6, 2012I've recently bought a WRT120N router, when I install the router using the CD an error occured error 322 New router or gateway not detected. I tried to download new version of firmware but it didnt work.
View 9 Replies View RelatedLinksys Wireless Router :: WRT120N Can't Access Setup?
Oct 3, 2011I can't access the web based setup via 192.168.1.1. I've had this problem since I swapped to Static Ip from PPPoE. I changed internet provider and now when it type 192.168.1.1 in the browser it says Internet explorer can't show the web page. I've tried Crome and FireFox but with the same result. I followed the instructions in [URL] but to no result.
View 1 Replies View RelatedLinksys Wireless Router :: WRT120N Not Recognized At Setup?
Apr 8, 2012I replaced a WRT120N router with a new one thinking that the old one was damaged. During setup, the router wasn't recognized. I used the same connection for a line from the internet to my LAN connectin and the line works fine. Connecting through the router is no good.
View 1 Replies View RelatedLinksys Wireless Router :: Difference Between WRT120N And WRT160N
Jul 29, 2011I am considering to purchase a Linksys Wireless router, but I just don't know which one to select.There are so many different types that seem to have very similar (if not equal) specs.If I just limit myself to the WRT120N, the WRT160N and the E1000, they all have 4 ethernet ports (10/100), and they all support 802.11 b/g/n for the wireless part.Obviously they all promise a blazing performance, and wireless coverage throughout the whole house, without (many) blind spots.But if their specs are the same, why are they different types?
View 2 Replies View RelatedLinksys Wireless Router :: WAN Port Burned WRT120n
Jan 2, 2013Several days ago there was a huge storm, and I think a thunder burned the WAN port of my linksys wrt120n router. Everything else is working good, I can detect the local network but I don't have internet. My internet connection is also working good. My question is, do I have a possibility to use some of LAN port like a WAN? I'm only using 2 of 4 LAN ports. It would be very useful because it's a pity to buy another router just for a not working WAN port.
View 3 Replies View RelatedLinksys Wireless Router :: Laptop Will Not Connect To WRT120N?
Jan 25, 2011I am trying to manually setup a WRT120N router. I am using my laptop (hard wired) for the initial setup. Okay, everything is working fine until I unplug the ethernet cable and try to go wireless. Will not connect to my network. I am also having this problem with all my other devices.
I had everything running fine on a WRT54G, I just wanted to try out the WRT102N. I did change the SSID name form what I was using on the WRT54G.