I don't have any problem with the wireless computers connected to the router but the wired one keep geeting disconnected. I'm loosing the internet many times a day on thiis one. Like I said the wireless is ok. My old router on my computer ( wired) was working well before I installed the wrt120n.
View 3 RepliesMy Cisco Linksys WRT120N router keeps disconnecting, my family and me are all using the wireless connection. But sometimes the router just disconnect us all, its like its restarting, it only close down for like 5 - 10 secounds and then its back on. Sometimes it does it like every secound hour and sometimes it does it 3 times in 10 min. I usually play games on it and even tho I am the only one using it, it still disconnects. We got 2 wireless cameras running on a secound router that is merged (Thats what the nerd that setted it up for us told me) with the primary existing router. I am not really that good at computer I just dont want to get disconnected all the time.
View 1 Replies View RelatedI have a WRT120n that keeps disconnecting my iMac. I have another PC conected with a wire to the wrt120n and never get's disconected however my iMac keeps disconecting and I have to reconect, this happens like every hour.
View 3 Replies View RelatedMy router was working fine. Then 1 day I started having slow internet. My ping in games would jump up from ~60 to about 400-800. Did some troubleshooting with my ISP. Seemed like my modem was to blame. So I bought a Netgear one from BestBuy.
Everything was fine. Then 1 day the internet stated disconnecting. None of the computers could see the router in the wireless networks. I found the only way to solve the problem is to unplug the power and plug it back in. Strangely it seems to happen a lot late at night like around 11PM or 12 midnight EST.
Before with my old modem I just had automatic settings and DHCP. With the new modem it wouldn't work so I called DLink and the tech guy walked me through some steps, one of which was changing the ip address from 192.256.0.1 to 10.10.10.1. Whenever I reboot the router after a disconnect the computers say "there was an IP address conflict." Maybe this has something to do with it?
I saw in another topic someone said their router's time was wrong. Mine said it was 2010 so I updated it to automatically sync with ntp1.dlink.com and now it shows 2012. Let's see if it fixes now. My mom's laptop had a similar problem with Skype. For some reason the clock kept resetting to 2000 and Skype would not work (everything else did). When she resets the time to 2012 it starts working again.
I have a medialink USB adapter and medialink wireless router. I've had them configured for a couple of months and both seem to work fine. The issue is with only one system (main desktop computer running windows 7 64bit). I shut the system down over this past weekend and when I came back today, it said that it could not connect to the network and that the settings saved for my wireless network were incorrect.
After much frustration and googling, I finally performed a hard reset of my router (tiny button in the back) and redid all of the security settings (different SSID, different password). I finally got my desktop to connect to the network. When I connected, windows prompted me saying that I was sharing an IP address with another computer on this network. I canceled out of the prompt and my wifi worked fine. However, my computer has been randomly disconnecting from the network every few minutes for the last hour or so. I have to manually reconnect to the network every time this happens and it does not seem to stay connected for long periods of time. All other systems on the network (laptop and phone) do not have this problem.
Additional note: When first trying to fix the problem (before hard reset), I disabled the "Bonjour" service in windows AND ran the following command: netsh int ip reset C: esetlog.txt per a suggestion on a forum. I'm not sure if this would have changed anything even after the reset.
i have a little problem with my wireless half mini card, because always, when i connect my wireless mouse into my laptop, my wireless half mini card starts to disconnecting me from wifi.
This problem is happing ALWAYS, when i join my mouse, Roccat Pyra to my laptop. If i join another kind of wired/wireless mouse, my connection to wifi is stable and everything works fine.
So type of my wireless half mini card: wireless half mini card dw1520-N WLAN
I tried to reinstall/ actualize drivers of this mouse and half mini card, also actualized whole Win7 and still having this problem.And for sure, i once more repeat, that i'm having this problem ONLY when ROCCAT™ Pyra – Wireless is connected, with other kind of mouses (logitech/genius) everyhing works fine.
I upgraded my E3000 to a new E4200 several months ago. I use an SSL VPN to connect to work which worked fine on 1.0.01 and 1.0.02 but I upgraded to 1.0.03 to fix an issue where the router constantly reboots when I stream Netflix or Hulu and now the router reboots with Netflix, Hulu AND the SSL VPN tunnel initiation.
View 6 Replies View RelatedI've recently acquired a Linksys E1200 router--which is more than a week old--from the recommendation of a friend of mine. The service is great and all, but the one thing that frequently bothers me is the seeming constant instability of my router's model. There are moments when the router performs smoothly, but there is as much an instance because the router doesn't seem to work at all even when the lights (and the accompanying connection) on my modem seem to be working in good order.
I know that a router will always have its problems, but this is really a constant problem with the E1200; and if so, if there's any way possible on how I can be able to "stabilize" the said router's performance.
Lately, I upgrade the firmware on my router. A linksys WRT54G. In order to access the router I had to do a manual reset to factory settings. Post upgrade, for some reason I couldn't access the internet. I tried everything for hours and finally through sheer luck of unplugging every cable and ever power lead and plugging it back in, it started working.
However, lately I've found that the only computer connected to the internet via eathernet cable is loosing connection intermittently. Also we seem to get constant huge spikes in latency and very inconsistent speed. Unplugging the router and plugging it back in again seems to solve this problem temporarily, but requires toggling of power multiple times a day. Also I had what I believe was an IP address conflict, or lack of an IP address once, but using the windows troubleshoot errors fixed that by resetting my wireless network card. (This was on a 2nd machine)
[code]...
Linksys WRT120N to 811.11n? I set to 811.11N Only with 40Mhz, saved and reboot the device but the signal continuous in 811.11g.
View 3 Replies View RelatedI bought a new Linksys WRT120N modem which is working great, but the wireless for some reason isn't working properly. My computer is able to sense the exsistence of the connection tho. I've tried using other computers to connect to it, and still the same problem, can sense but cannot connect.
View 8 Replies View RelatedI currently have a network using ipaddress 10.1.x.x and 10.2.x.x and 10.3.x.x with a subnet of 255.0.0.0 I purchased 2 of the wrt120n wireless routers for testing and find I can not use the subnet of 255.0.0.0.
View 9 Replies View RelatedI have a WRT120N and have been trying to set up priorities using the QoS under the tab Applications and Gaming. Everytime I "Save Settings" it does not save. It refreshes the page and deletes everything I just set up.
I did Live Chat and they told me it was my router. I returned it and got another one... Same problem
I'm using an Static IP adress and i'm using wrt120n router, but to connect the internet i have plugged the internet cable in the 1,2,3,4 (doesn't matter which one) slot. So now i'm just using the wirelss part of the router without "routering" if i can say so. When i put the internet cable in the Internet slot of the router, the laptop just cant connect to internet - it shows Unidentified network without Internet Access. I don't know what type of changes i have to make in the WEB interface of the router. I think i have to set the type of the connection - now is DHCP and may be to put my IP adress, DNS, Subnet mask in the router settings, but don't know how exactly. I've tried to set up the router with the CD-interface but same thing happened - Unidentified network when the cable is plugged in the Internet (yellow) port. How to set up the router to be a router, not just a wireless switch?
View 9 Replies View RelatedMy roommate and I recently got a WRT120N to replace an older Linksys router that was exhibiting the same problems with less frequency. Indeed, the entire reason we got the new router was to fix these problems. Alas, they have become worse.Anyways, what's happening is that the router constantly resets itself. It does this every 20 minutes to an hour and doesn't seem to be related to how much traffic it's dealing with.It's not just the internet going down, it's the entire network, and not even just the wireless part. My computer has a wired connection to the router and, and I get told "A network cable has been unplugged" every time it happens. Then, if I look down at the router, I see no flashing lights, just the steady glow of the power light. It always fixes itself after 10-15 seconds, but it's very annoying. Certainly, playing games online or having a conversation on Skype is made more difficult.As previously mentioned, we replaced our older router because it was exhibiting the same behavior, but the new one does it with greater frequency. At the very least, the router does reset itself instead of needing us to cycle the power. The setup was slightly different with the old router: I was using a wireless connection with a WMP54Gv4 which I've had to disable since it bluescreens the moment it so much as sniffs a signal from the WRT120N?
View 9 Replies View RelatedIs there anyway to disable WPS on the WRT120N router?
All I can do is switch the "view" from WPS to manual configuration in the management console...this doesn't actually disable anything.Maybe I don't understand WPS security, but what's the point of using a 20 character WPA2 password if WPS has an 8 digit PIN that I can't change or disable?
I just bought a WRT120N to set up with my new Gateway Windows 7 64-bit using Cablevision cable internet. When I go through the steps from the CD to install, the wizard does not find the connection. When the internet is plugged directly into the computer, it works fine. If I have the router plugged in first and then run the install CD, it picks up the router as an existing router but I can't get it to install
View 4 Replies View RelatedI have a WRT120N router installed in my office.All PC and Laptops are connected to it via WiFi.there are about 3 PC and 4 Laptops.The WiFi keeps going Off now and then..and comes back on in a minitue or so.
View 9 Replies View Relatedwhy are some of the lines solid & others dotted on the map page?
View 4 Replies View RelatedI removed my ps3 from my network map and now i can't connect it back. How to do it?
View 1 Replies View RelatedI have a WRT160N v3 Linksys Router and it keeps disconnecting and then reconnecting. It only disconnects wirelessly. LAN still works fine.I have tried a lot of different methods to solve this issue, but none seem to work.I am very dissappointed in the quality of the product. It has done this every since it was bought. I personally would have sent it in for repairs, but others in my household would not have agreed to that.
[code]...
I have Time Warner as my internet company. I recently purchased a new Linksys Router Mode E2500 because I have been having issues with my old router. My internet was disconnecting sporadically. After connecting the new router, a started getting the same issue. I replaced my internet cable modem to a Cisco 2100 modem (provided by Time Warner). I noticed that the issue keeps happening sporadically which makes me believe it is my Linksys router. Every time a new wireless connection is connected, my modem circuit dies. This happens sporadically.
View 4 Replies View RelatedI plan on replacing my linksys BEFW11S4 wireless router with a new linksys WRT120N wireless router. Should I completely remove and unplug the old router before inserting the startup CD and beginning the installation process for the new router?
View 3 Replies View RelatedI have several computers and printers connected to a WRT120N router which is connected to 10mpbs DSL. The computers are all running WIN7 and are hardwired to the router. On the one PC, it keeps losing network connection. I've tried upgrading the router's firmware, reset, etc. to no avail.
I think it may be related to the same IP address being assigned to multiple machines connected to the router. Is there a way to set specific IP addresses to each item connected to the router to see?
I've recently bought a WRT120N router, when I install the router using the CD an error occured error 322 New router or gateway not detected. I tried to download new version of firmware but it didnt work.
View 9 Replies View RelatedI can't access the web based setup via 192.168.1.1. I've had this problem since I swapped to Static Ip from PPPoE. I changed internet provider and now when it type 192.168.1.1 in the browser it says Internet explorer can't show the web page. I've tried Crome and FireFox but with the same result. I followed the instructions in [URL] but to no result.
View 1 Replies View RelatedI replaced a WRT120N router with a new one thinking that the old one was damaged. During setup, the router wasn't recognized. I used the same connection for a line from the internet to my LAN connectin and the line works fine. Connecting through the router is no good.
View 1 Replies View RelatedI am considering to purchase a Linksys Wireless router, but I just don't know which one to select.There are so many different types that seem to have very similar (if not equal) specs.If I just limit myself to the WRT120N, the WRT160N and the E1000, they all have 4 ethernet ports (10/100), and they all support 802.11 b/g/n for the wireless part.Obviously they all promise a blazing performance, and wireless coverage throughout the whole house, without (many) blind spots.But if their specs are the same, why are they different types?
View 2 Replies View RelatedSeveral days ago there was a huge storm, and I think a thunder burned the WAN port of my linksys wrt120n router. Everything else is working good, I can detect the local network but I don't have internet. My internet connection is also working good. My question is, do I have a possibility to use some of LAN port like a WAN? I'm only using 2 of 4 LAN ports. It would be very useful because it's a pity to buy another router just for a not working WAN port.
View 3 Replies View RelatedI am trying to manually setup a WRT120N router. I am using my laptop (hard wired) for the initial setup. Okay, everything is working fine until I unplug the ethernet cable and try to go wireless. Will not connect to my network. I am also having this problem with all my other devices.
I had everything running fine on a WRT54G, I just wanted to try out the WRT102N. I did change the SSID name form what I was using on the WRT54G.
I'm having an issue where essentially my only course of action is to unplug the router and plug it back in. I can connect my laptop (Dell Inspiron N4010) and my phone (HTC Inspire) once. But then if I put my computer to sleep, or I take my phone out of the wireless range and come back, I cannot connect again. I've gone through and played with the settings (changing the upnp, the beacon intervals, the channel, etc) but to no avail. Invariably, I always have to come back to unplugging and plugging back in.
Also have a Kobo E-Reader and a wireless Canon printer. The whole point of a wireless printer was so that it would stay connected and I can print from my laptop. This router is making this useless.
My mother in law bought my daughter a impression android tablet for Christmas it connects fine at public hotspots but I can not get it to connect to our wrt120n router at home. I have tried everything I know to add it. It asks for the password then says getting IP address then disconnects.
View 2 Replies View Relatedhow to get the factory firmware version 1.0.01. I have a problem with the settings. I want to return to the basic version, but can not find anywhere else.
View 4 Replies View Related