Linksys Wireless Router :: Factory Firmware For WRT120N
Aug 15, 2011how to get the factory firmware version 1.0.01. I have a problem with the settings. I want to return to the basic version, but can not find anywhere else.
View 4 Replies
ADVERTISEMENT
Linksys Wireless Router :: WRT120N Reset To Factory Defaults
Oct 26, 2009We've lost our WRT120N's administrator password and are trying to reset it to factory defaults.One peculiar thing that we have noticed is that the router has an IP of 192.168.106.1 rather than the default of 192.168.1.1 (this is verified by the default gateway, as well as a login prompt when 192.168.106.1 is put into a browser).Things we've tried to do to reset the router:
1) Press and hold the reset button at the back of the router for 30 seconds
2) Press and hold the reset button at the back of the router for 60 seconds
Â
Interestingly, doing either of these things seemed to have no effect on the status lights.
Linksys Wireless Router :: E3000 Original Factory Firmware
Mar 15, 2012IÂ updated my E3000Â firmware to Ver. 10.0.4 and did not backup the original firmware. How I can get the original firmware file for this router.
View 3 Replies View RelatedLinksys Wireless Router :: Getting Firmware Update For WRT120N?
Jul 10, 2009Just got a WRT120N and went online to get the most recent firmware and when i performed the upgrade it's gets about 3/4 of the way completed before it just stalls and start screen blinking like it's caught up or something. I using a modem, wrt120n router connection with a Brand New Sony Vaio laptop. I was able to upgrade my old WRT54G V5 router but can't seem to get the new router to update.
View 7 Replies View RelatedLinksys Wireless Router :: WRT120N - Firmware To Use It Properly
Mar 30, 2012FW_WRT120N_1.0.02.001 was the best fw for this router. Any upload for this firmware? Without it i cant use my router properly.Â
View 2 Replies View RelatedLinksys Wireless Router :: E3000 Restoring Factory Defaults / Upgrading To Latest Firmware
Sep 16, 2010I just upgraded to a E3000 from a WRT54G and I am having some issues with network speed.I have no special settings and have even tried restoring factory defaults and upgrading to the latest firmware to no avail.The time I notice the biggest hit is when transferring files locally on the network (WiFi and LAN).Let me note that I do know the difference between MB/s & Mb/s and the like.I have Comcast 20Mb/s Down, 1.5Mb/s Up (just a FYI, the main issue is local transfers)
Â
With default settings my Laptop (ASUS N82JQ, Atheros AR9285 Wireless Network Adapter), connects to the router at only 65Mb/s (with full signal).Upload seems to be more decent ~600KB/s (Transferring files from wireless n laptop to the gigabit desktop).Download seems to be limited to ~150KB/s (Copying files from the wired gigabit desktop to the wireless n laptop).These speeds are horrible! ~5hrs to transfer 3GB of data!
Â
One of my laptops had a card that was capable of both 2.4 & 5Ghz and I was previously getting ~2000-5000KB/s (2-5MB/s) transfers with this router (But I had to do a system restore on it and reset the router). My ASUS laptop seems to only work with 2.4Ghz though. If I change the 2.4Gh Wireless settings on the router to "Auto(20MHz or 40MHz)" the laptop will connect at 150Mb/s, but the speeds are the same slow speeds as above.
Linksys Wireless Router :: Unable To Upgrade Firmware Of WRT120N
Jan 22, 2012Firmware downloaded, FW_WRT120N_1.0.06.001_US after pressing APPLY nothing happens after few minutes it says. "There is an error in the Content-type field. Click the Back button to return to the previous page and re-enter the information."
View 2 Replies View RelatedLinksys Wireless Router :: Find Previous Versions Of WRT120N Firmware?
Feb 18, 2012I have a problem with current (1.0.06) firmware on WRT120N. Few hours after restart DHCP server stops assigning IP addresses. Another restart resolves problem, but only for next few hours.Computers and other devices "see" my wireless network and they are able to connect to it, but the process stops at requesting IP number.There was no such effect with original firmware (although there was another problem with 2200BG), so I want to downgrade.where can I find previous versions of WRT120N firmware?
View 2 Replies View RelatedLinksys Wireless Router :: Firmware Upgrade For WRT120N To Support IPV6?
Jul 22, 2010IPV4 IP addresses will be running out in less than a year and I wanted to know, will there be a firmware update for WRT120N to support IPV6?
Â
Also, if I have to buy another router to support IPV6, I'm going to buy a D-Link. It's nothing personal, I just find it absolutely idiotic that a router that supports wireless-N doesn't support IPV6. You have to ask your self, how does the standard IPV6 spec thats a few years old not make it to the final product of a router, but a non-standard wireless-N spec implementation somehow got the O.K....?
Linksys Wireless Router :: WRT120N / Firmware V 1.0.06 - Losing Internet Connection?
Feb 4, 2012- I am losing internet connections at least 1 time/ day. I have 2 wired and 2 wireless devices.
- when the internet is down I am connected to the router (wireless and wired, the connection is not lost/cable unplugged..).
- only when I power cycle the router I recover access to my admin page and internet connection.
* Firmware Version 1.0.06
Linksys Wireless Router :: WRT120N Pressing Reset Upon Turn On And Reinstall Firmware On Bootloader
Aug 14, 2011I have WRT120N, i recently updated the firmware. 1.0.06. only my bad is i done it wireless. so its basically interrupted.I have tried, hard reset and power cycle and reinstall the firmware but still the problem occurs, this time its wired.it happens intermittently. i have tried pressing reset upon turn on and reinstall firmware on the bootloader. it stablized for a while but then disconnects and blinking stikes again.Â
View 2 Replies View RelatedLinksys Wireless Router :: WRT54G Resetting To Factory Default By Itself?
Aug 11, 2008I have a WRT54G router Ver. 5 with firmware v. 1.02.5. This is the second time this has happened to me but the router reset itself to the factory defaults. I lost all my configurations.  I'm saving the configuration this time but it will be annoying to keep having to reconfigure the router.
View 9 Replies View RelatedLinksys Wireless Router :: WRT160N - Factory Settings Reset?
Jun 7, 2010How to reset my router to factory settings so i can install it on a new computer
View 2 Replies View RelatedLinksys Wireless Router :: Wrt54gl Won't Reset To Factory Default
Jul 25, 2012i have a wrt54gl version1.1 ok so let me start from the beginning.a few months ago i left the contry so a friend of mine asked me to lent him my router. a few day`s ago i got back and got my router back. it was working fine until i got it back. the rest button won`t work. i can`t reset the router to factory default. the user name was blank and the password was admin.now it won`t let my to do that.
View 9 Replies View RelatedLinksys Wireless Router :: Reset WRT54G2 V1 To Factory Settings?
Dec 29, 2009Iused my installation cd to re-setup my linksys. I moved and used a laptop previously. Now i am at a house that has a desktop. I want to keep the desktop wired and make my laptop wired. So, when i went to re-install it said i had to reset my linksys to factory settings.
View 2 Replies View RelatedLinksys Wireless Router :: E4200 Reset To Factory Default
Nov 26, 2012Due to password loss, I get to reset the E4200 to factory default in order for router re-config.After pressing the reset buttom for 10sec, the router reset. After then, I could not access the router via browser with 192.168.1.1 at URL entry. My PC IPv4 setup: 192.168.1.11; subnet=255.255.255.0.But, ping 192.168.1.1 from PC was OK without packet loss. So router was restored with 192.168.1.1 and cable connection was OK.
View 2 Replies View RelatedLinksys Wireless Router :: Resetting WRT54G To Factory Defaults?
Jun 23, 2008I reset my WRT54G wireless router, so I could use the default password for 192.168.1.1 and the default password and username still do not work.
View 6 Replies View RelatedLinksys Wireless Router :: Wrt600n Still Can't Login To Router After Factory Reset
Oct 17, 2008Ok, so I reset the router but i still can't login to the setup using the factory password (admin/admin) (blank/admin) (admin/blank). Â Now I have an unencrypted network and no access to the setup... I even tried using the setup CD but it doesn't recognize the router. Â
View 2 Replies View RelatedLinksys Wireless Router :: EA6500 Router Is Rebooted / Factory Reset
Apr 15, 2013My EA6500 has been working fine for the last few months but a few days ago i upgraded to the latest firmware 1.1.28.147876 - this was done by an ethernet cable, not by wifi. However i've noticed the router reverts back to the previous fw 1.1.28.146856 when the router is rebooted or factory reset. I've repeated the fw upgrade process and also done a hard reset before upgrading the firmware but no avail. Normally after firmware is 'upgraded' the router reboots and i get the message "firmware successfully installed" but then on subsequent reboots the firmware reverts back. I'm using local router access but even using smartwifi gives the same issue. When upgrading fw, i've tried both options online & manual but again makes no difference.
Â
 Don't really fancy calling Linksys support and going through 4 hrs of basic trouble shooting. Or perhaps Cisco have introduced a new automatic firmware downgrade option in their routers?
D-Link DIR-601 :: Upgrading Firmware From 1.0 To 1.02 Will It Default Factory Settings?
Aug 6, 2011I currently have this router in use with verizon dsl (PPPoe) setup.I have this set to "always on". Since the verizon modem, which is also router has been set into bridge mode and the d-link came into play its been extremely slow, and dropping connection. The router is in a separate IP class, and has no conflict with the modem. My question is, if I upgrade this firmware from 1.0 to 1.02 will it default to factory settings? I know it says only some will. I do have the backup config file, but i would be doing this remotely, and would not be able to get to this router if it goes down. Has anyone gone from 1.0 to 1.2 and saw a difference and speed, and are you able to do this without losing settings.
View 3 Replies View RelatedLinksys Wireless Router :: WRT160Nv3 Constantly Resetting To Factory Defaults?
Jan 9, 2010WRT160Nv3 Firmware Version:Â v3.0.02Â Â
Â
I've been using Linksys for years but the last two routers I have purchased have been very problematic.
Â
- My router hasn't had this problem before. The other day I was downloading 4 games at a time from STEAM, when I got home from work I found that my router had completely gone back to factory settings.  So I configured my DSL PPPoE, SSID, Wireless Security (WPA) changed the default admin PW and about 20 minutes later it was back to factory again.
Â
I've done a "hard" reset and reconfigured and still it resets itself. What's also upsetting is this completely opens my network up to ANYONE when this happens...
Â
So far in the past 2 days I have (now using a backup restore file) re-configured the device 10 times.
Â
The only thing I can think of is that I just got Windows 7 the same day this started happening. I thought it could be STEAM as well so right now I have STEAM closed to see if it resets while it isn't running.
Â
Could TOO much demand on the router cause it to completely reset itself to factory config?? Seems to me like there's a huge firmware or hardware problem here.
Â
I have other friends and even co-workers that also have problems galore with their Linksys products...No other router it seems has as MANY issues as Linksys. Hat to say it but my next purchase most likely will not be another one of their products. This just shouldn't be happening.
Linksys Wireless Router :: WRT160Nv3 Resetted To Factory Defaults Automatically
Mar 9, 2013today I got up and discovered that my WRT160Nv3 router has resetted to factory defaults itself, the name of the Wifi network was "linksys" and all configurations were the defaults...
Â
That's normal? This is the first time it happens.
Linksys Wireless Router :: Setup Won't Find E3000 After Factory Reset
Nov 1, 2012My router wasn't giving out proper ip addresses so I went through the steps to reset the router to factory defaults. After I tried to run the setup off of the cd which came with the router and the program is saying it can't find my router
View 9 Replies View RelatedLinksys Wireless Router :: WRT120n - How To Set To 811.11n
Apr 18, 2012Linksys WRT120N to 811.11n? I set to 811.11N Only with 40Mhz, saved and reboot the device but the signal continuous in 811.11g.
View 3 Replies View RelatedLinksys Wireless Router :: EA4500 Cannot Connect To Internet - Restored To Factory Configuration
Jul 9, 2012I've bought the EA4500 and configured it to connect to internet. it works fine.however, one day after it, it can't connect to the internet anymore. I go to the router setup page and try to manually connect it to the internet, but it keeps "connecting." I then restore to its factory configuration, then do the configuration again and it can successfully connect to the internet.however, one day after it, again, it can't connect to the internet anymore.
View 2 Replies View RelatedWireless Not Working On WRT120N Linksys Router?
May 18, 2011I bought a new Linksys WRT120N modem which is working great, but the wireless for some reason isn't working properly. My computer is able to sense the exsistence of the connection tho. I've tried using other computers to connect to it, and still the same problem, can sense but cannot connect.
View 8 Replies View RelatedLinksys Wireless Router :: Can WRT120N Use Subnet 255.0.0.0
Mar 25, 2011I currently have a network using ipaddress 10.1.x.x and 10.2.x.x and 10.3.x.x with a subnet of 255.0.0.0  I purchased 2 of the wrt120n wireless routers for testing and find I can not use the subnet of 255.0.0.0.
View 9 Replies View RelatedLinksys Wireless Router :: WRT120N QoS Does Not Work?
Oct 29, 2009I have a WRT120N and have been trying to set up priorities using the QoS under the tab Applications and Gaming. Everytime I "Save Settings" it does not save. It refreshes the page and deletes everything I just set up.Â
Â
I did Live Chat and they told me it was my router. I returned it and got another one... Same problem
Linksys Wireless Router :: How To Setup WRT120N
Sep 5, 2010I'm using an Static IP adress and i'm using wrt120n router, but to connect the internet i have plugged the internet cable in the 1,2,3,4 (doesn't matter which one) slot. So now i'm just using the wirelss part of the router without "routering" if i can say so. When i put the internet cable in the Internet slot of the router, the laptop just cant connect to internet - it shows Unidentified network without Internet Access. I don't know what type of changes i have to make in the WEB interface of the router. I think i have to set the type of the connection - now is DHCP and may be to put my IP adress, DNS, Subnet mask in the router settings, but don't know how exactly. I've tried to set up the router with the CD-interface but same thing happened - Unidentified network when the cable is plugged in the Internet (yellow) port. How to set up the router to be a router, not just a wireless switch?
View 9 Replies View RelatedLinksys Wireless Router :: WRT120N Keeps Resetting On Its Own?
Jan 18, 2010My roommate and I recently got a WRT120N to replace an older Linksys router that was exhibiting the same problems with less frequency. Indeed, the entire reason we got the new router was to fix these problems. Alas, they have become worse.Anyways, what's happening is that the router constantly resets itself. It does this every 20 minutes to an hour and doesn't seem to be related to how much traffic it's dealing with.It's not just the internet going down, it's the entire network, and not even just the wireless part. My computer has a wired connection to the router and, and I get told "A network cable has been unplugged" every time it happens. Then, if I look down at the router, I see no flashing lights, just the steady glow of the power light. It always fixes itself after 10-15 seconds, but it's very annoying. Certainly, playing games online or having a conversation on Skype is made more difficult.As previously mentioned, we replaced our older router because it was exhibiting the same behavior, but the new one does it with greater frequency. At the very least, the router does reset itself instead of needing us to cycle the power. The setup was slightly different with the old router: I was using a wireless connection with a WMP54Gv4 which I've had to disable since it bluescreens the moment it so much as sniffs a signal from the WRT120N?
View 9 Replies View RelatedLinksys Wireless Router :: Disable WPS On WRT120N?
Aug 20, 2011Is there anyway to disable WPS on the WRT120N router?
Â
All I can do is switch the "view" from WPS to manual configuration in the management console...this doesn't actually disable anything.Maybe I don't understand WPS security, but what's the point of using a 20 character WPA2 password if WPS has an 8 digit PIN that I can't change or disable?
Linksys Wireless Router :: Can't Get New WRT120N To Connect
Mar 17, 2010I just bought a WRT120N to set up with my new Gateway Windows 7 64-bit using Cablevision cable internet. When I go through the steps from the CD to install, the wizard does not find the connection. When the internet is plugged directly into the computer, it works fine. If I have the router plugged in first and then run the install CD, it picks up the router as an existing router but I can't get it to install
View 4 Replies View RelatedLinksys Wireless Router :: Wrt120n / Wifi Keeps Going Off
Jul 2, 2012I have a WRT120N router installed in my office.All PC and Laptops are connected to it via WiFi.there are about 3 PC and 4 Laptops.The WiFi keeps going Off now and then..and comes back on in a minitue or so.
View 9 Replies View Related
