Linksys Wireless Router :: WRT160N - Factory Settings Reset?
Jun 7, 2010How to reset my router to factory settings so i can install it on a new computer
View 2 Replies
ADVERTISEMENT
Linksys Wireless Router :: Reset WRT54G2 V1 To Factory Settings?
Dec 29, 2009Iused my installation cd to re-setup my linksys. I moved and used a laptop previously. Now i am at a house that has a desktop. I want to keep the desktop wired and make my laptop wired. So, when i went to re-install it said i had to reset my linksys to factory settings.
View 2 Replies View RelatedLinksys Access Point :: WAP54G Won't Reset To Factory Settings
Mar 23, 2013I was having some connectivity issues with my network of WAP54G's, so I had a technician come to have them looked at. The technician turned out to be completely clueless, and he messed up one of the APs in the process. He changed its IP address and apparently updated its firmware, but he didn't write the new address down, so now I can't access its administrator panel. I've tried to retrieve the IP address using the setup CD that came with the AP, but it doesn't even see the AP in my network. I've tried to factory reset the AP by holding the reset button for 10, 30 and 60 seconds and unplugging the power cord, but to no avail. It still doesn't bring up the admin panel when I enter the default IP in the browser. I think I've tried everything I could find on the Internet about this problem that didn't involve cracking the AP open, but none of it has worked.
View 4 Replies View RelatedD-Link DIR-655 :: Cannot Access Router Or Reset Factory Settings
Jul 22, 2010My computer is an XPS 360 with alot of upgrades. After looking at the specs of D-links routers I thought I give it a try. Hooked up, works like a dream. Couple months later my computer was saying I have "limited connectivity." All of the other computers have full access and works great. I tried going to my routers home page, but all I get is "The server at 192.168.0.1 is taking too long to respond." Ive tried renewing the ipconfig, restarting everything, new cables....everything I can imagine. I tried calling my ISP and they told me it wasnt there fault, that its pretty much on my end. I called Dell for support, said my warranty went out and they cant do a thing.
View 14 Replies View RelatedWindows Vista - Reset Router To Factory Settings Now Cannot Configure
Feb 6, 2012I have windows vista, and forgot my network password. I reset my router to factory settings by pushing the reset button on the back.I tried reconfiguring the router from the network icon, but at the end of the process it says it cannot configure my router.I lost my internet service in the process
View 1 Replies View RelatedCan't Reset Arris Wtm652 To Factory Settings
May 5, 2011I am locked out of my Arris wtm652 (unable to login with default password or the password that i set). I have tried every way I know of to reset the modem outer to its factory settings but to no avail. I know that it is not being reset because I still can not login to it and it is maintaining the wireless security settings that were set for it.
View 1 Replies View RelatedCisco Firewall :: Pix 515e To Reset The Device To Factory Settings
Aug 12, 2011I have completed my CCNA qualification and i am doing some volunteering for a none proffit eletronics recyciling company they receved some cisco pix 515e firewalls and i was aloud to keep one so i can learn how hardwaire firewalls work and how to set them up but i can not seem to connect to it is there a way to completely reset the device to factory settings without any ip address or passwords i do not have any cables for the device but i have made a straight and cross over cable and there is a box of cables at the recyciling company from diffrent places if i need a specialist cable i may be able to find one
View 6 Replies View RelatedCisco Routers :: RVS4000 Necessary To Reset To Factory Default Settings
Feb 15, 2009Recently purchased a RVS4000 Router, which included v1.1.14 firmware. Is it necessary to reset the router to Factory Default settings, after upgrading to v1.2.11, as in most of the other previous upgrades?
View 37 Replies View RelatedLinksys Wireless Router :: Wrt54gl Won't Reset To Factory Default
Jul 25, 2012i have a wrt54gl version1.1 ok so let me start from the beginning.a few months ago i left the contry so a friend of mine asked me to lent him my router. a few day`s ago i got back and got my router back. it was working fine until i got it back. the rest button won`t work. i can`t reset the router to factory default. the user name was blank and the password was admin.now it won`t let my to do that.
View 9 Replies View RelatedLinksys Wireless Router :: E4200 Reset To Factory Default
Nov 26, 2012Due to password loss, I get to reset the E4200 to factory default in order for router re-config.After pressing the reset buttom for 10sec, the router reset. After then, I could not access the router via browser with 192.168.1.1 at URL entry. My PC IPv4 setup: 192.168.1.11; subnet=255.255.255.0.But, ping 192.168.1.1 from PC was OK without packet loss. So router was restored with 192.168.1.1 and cable connection was OK.
View 2 Replies View RelatedLinksys Wireless Router :: WRT120N Reset To Factory Defaults
Oct 26, 2009We've lost our WRT120N's administrator password and are trying to reset it to factory defaults.One peculiar thing that we have noticed is that the router has an IP of 192.168.106.1 rather than the default of 192.168.1.1 (this is verified by the default gateway, as well as a login prompt when 192.168.106.1 is put into a browser).Things we've tried to do to reset the router:
1) Press and hold the reset button at the back of the router for 30 seconds
2) Press and hold the reset button at the back of the router for 60 seconds
Interestingly, doing either of these things seemed to have no effect on the status lights.
Linksys Wireless Router :: Setup Won't Find E3000 After Factory Reset
Nov 1, 2012My router wasn't giving out proper ip addresses so I went through the steps to reset the router to factory defaults. After I tried to run the setup off of the cd which came with the router and the program is saying it can't find my router
View 9 Replies View RelatedLinksys Wireless Router :: How To Reset WRT160N
Dec 5, 2012How will I reset WRT 160N?
View 1 Replies View RelatedLinksys Wireless Router :: WRT160N V3 Not Working After Reset
Jun 1, 2011My sone pushed the reset button and now I cannot get the router to work. I can only connect to the internet if I am connected directly to my modem... the router does not recognize my computer (corresponding # does not light up on the the router). I have tried disconnecting everything and reconnecting everything but it doesn't work.I am using Windows7. How I can begin using the router again? (My knowledge with this I have had it for almost 2 years and is out of warranty... What can I do so I don't have to buy a new one?
View 4 Replies View RelatedLinksys Wireless Router :: Wrt600n Still Can't Login To Router After Factory Reset
Oct 17, 2008Ok, so I reset the router but i still can't login to the setup using the factory password (admin/admin) (blank/admin) (admin/blank). Now I have an unencrypted network and no access to the setup... I even tried using the setup CD but it doesn't recognize the router.
View 2 Replies View RelatedLinksys Wireless Router :: EA6500 Router Is Rebooted / Factory Reset
Apr 15, 2013My EA6500 has been working fine for the last few months but a few days ago i upgraded to the latest firmware 1.1.28.147876 - this was done by an ethernet cable, not by wifi. However i've noticed the router reverts back to the previous fw 1.1.28.146856 when the router is rebooted or factory reset. I've repeated the fw upgrade process and also done a hard reset before upgrading the firmware but no avail. Normally after firmware is 'upgraded' the router reboots and i get the message "firmware successfully installed" but then on subsequent reboots the firmware reverts back. I'm using local router access but even using smartwifi gives the same issue. When upgrading fw, i've tried both options online & manual but again makes no difference.
Don't really fancy calling Linksys support and going through 4 hrs of basic trouble shooting. Or perhaps Cisco have introduced a new automatic firmware downgrade option in their routers?
Linksys Wireless Router :: E4200 - Reset To Factory Defaults / Enable IPV6 Auto
Aug 10, 2011I flashed the firmware and the ipv6 automatic is on disabled and I cannot set it to enabled.the 6rd tunnel option I can change but that has not effect- in fact from what I looked up it seems to be something used by some cable providers.hate to have to reset the router to factory defaults and then reset the network up - just to see if i can get the option to set IPV6 auto to enabled.
View 3 Replies View RelatedLinksys Wireless Router :: WRT160N - Unable To Reset Password?
Jul 21, 2012Using router WRT160N when trying to change password system locks lost password and hit reset now everyone in neborhood can access my router running real slow now
View 4 Replies View RelatedLinksys Wireless Router :: WRT160N - Cannot Save Single Port Forwarding Settings
Sep 6, 2011I did read the thread entitled ''WRT160N Can't save settings'', but I believe this might be different. My router is actually communicating with my computer (physically plugged in), since I can save all other settings EXCEPT the port-fowarding ones.I am trying to save settings for a gaming application in the Single Port Forwarding section of my router settings. After clicking both ''save settings'' and ''continue'', it simply returns to the Single Port Forwarding section, except everything is blank, as though nothing was saved.
Here are my specs:
WRT160Nv1
Firmware Version: v3.0.03
Here are the steps I have already undertaken:
1- Erase browser cache and cookies
2- Updated to latest firmware (v3.0.03), 10-second reset button, 20-second power cycle.
Linksys Wireless Router :: E4200 V2 Looses Settings Need Hard Reset
Mar 17, 2013I have an e4200 with the latest firmware 2.1.39. I just upgraded the firmware due to connection issues with my DSL. I now have the same issues with disconnects but I believe they are being caused by a different issue. When I try and log into my router through the IP address it wont let me, it says it can't find the router. Eventually after getting in the first time by using the default password, I have twice found out that all my settings are gone. This has happened twice this week and only happened after upgrading the firmware but I can not tell if firmware is causing it or if it is hardware related. I now reboot and restore saved firmware but that is a hassle and am pretty sure that is not the way it was designed to work.
View 9 Replies View RelatedLinksys Wireless Router :: Reset WRT300N To Default Settings To Setup Internet Connection
Mar 29, 2012I've just managed to reset the WRT 300N to default settings and have setup the internet connection etc and home network ... BUT no matter how I've fiddled with the wireless settings I cannot get any of the laptops or mobile phones to connect wireless to the network.The Windows software on the laptops 'finds' the router OK but for some reason the router seems unwilling to supply an IP address.I've checked ALL of the settings that I can think of, and all are correct ... well, all are exactly the same as my old router which worked perfectly.
View 4 Replies View RelatedLinksys WRT160N Router Not Working After Pushing Reset Button?
Dec 14, 2011I have a Linksys wireless router WRT160N, and its worked fine for the past year, till last night, when I pushed the reset button trying to solve another issue and now my router isnt working. I ran Linksys setup disc and it said I was all up and running, but still cant get online with my laptop through the router.I am at a point where I have my default gateway address 192.168.1.1 and my IP address, but not sure what to do with that to get this issue corrected.
View 14 Replies View RelatedLinksys Cable / DSL :: WAG200g Factory Reset Itself?
Aug 10, 2011I have been using Linksys WAG200g as a modem&router at my home for few years already and it did a great job. Plugged it on 24hours non-stop. Default firmware.
However, in the past months WAG200g did the factory reset by itself. It happened once a month, 3 months in a row already. No body pressed the reset button nor use the web admin to reset it. It reset itself. All the SSID, IP Address, passwords, etc are reset to default.
Linksys Cable / DSL :: WCG200 Factory Reset?
Apr 26, 2012If I use the reset on the back of the WCG200 and reset it to the original factory settings, does the firmware version revert to the original version?
View 2 Replies View RelatedLinksys Access Point :: Wap54g / How To Reset To Factory Default
Jan 24, 2013I reset unplug did everything according from cisco.com it didn't work.Can not go to 192.168.1.245. What next I need to do to make it work.
View 3 Replies View RelatedReset Linksys WRT160N IP Address?
Aug 7, 2011I wanted to reset my IP address, so I called my cable internet service provider and they walked me through the process. I unplugged the ethernet cable from my router and connected my computer directly to my modem. Then, I unplugged the coax cable from my modem, plugged in back in again, and within Windows did ipconfig/renew in the command prompt. This successfully changed my IP address.
Then, I ran my wires back into the router again (instead of plugging the computer directly into the modem). To my surprise, the old IP address was back again! So, I went into linksys 192.168.1.1 screen to release the IP address and started the process over again.
I got a new IP address once again, but now the Linksys router can't seem to figure out the new IP address so nothing works going through the router.
Resetting Modem / Router To Factory Settings
Oct 8, 2011Got a Belkin wireless modem router some 18 monthes ago, and after a bit of a struggle managed to set it up. It worked fine, aside from the odd depower repower. For some reason, it just stopped working yesterday. I initially checked all my cabling etc and everything seems fine. I next tried resetting my modem/router to factory settings. When I tried to install the Belkin software I fell at the first hurdle with a message saying "The setup assistant is not able to connect to the router". After googling my issue, I followed others advice and running the cmd setting and typing in "ipconfig" only to find that my media state was disconnected.
View 2 Replies View RelatedCisco WAN :: 877 Router Factory Reset Woes?
Sep 3, 2012We've recently changed data line providers and now have some Cisco 877 routers we'd like to reconfigure and use at other sites. Although we own these, they were configured by our old data line providers, I'm having a hard time of resetting them to factory defaults. The simple, hold down the reset button until it restarts does not work.If I press the reset button within 5 seconds of power up to load the default rom image, I get the below:
System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE
Technical Support: [URL]
Copyright (c) 2006 by cisco Systems, Inc.
C870 series (Board ID: 1-148) platform with 131072 Kbytes of main memory
Booting flash:c870-advipservicesk9-mz.124-24.T.bin
Error opening: flash:c870-advipservicesk9-mz.124-24.T.bin
[code]....
I assume from this the required bin has either been removed, renamed or overwritten.As soon as the router boots it requires a password and I dont have the password to be able ftp files in and out of it.
D-Link DIR-615 :: Restore The Router To Factory Reset
Feb 1, 2010 I have installed DD-WRT firmware onto my new D-Link DIR-615. It causes some problems and I'd like to re-flash router with orginal firmware. After turning router on with Emergency Room mode and choosing right (as for me) image file I'm getting "Unable to upload the image, please make sure the uploaded file is the correct image." Information.
Firmware downloaded from: [URL]
How can I fix my router? Which firmware file will be correct if not an original?
Cisco Wireless :: WRT160N Needs Factory Installed Username And Password
Sep 8, 2010I have a Cisco Wireless Router, Model # WRT160N. I had initally installed it to a laptop. I have a new PC which I am trying to install it to. Unfortunately, when I installed it to the laptop, I put in a new Username and Password. When I tried to install it to the PC, it gets to point of trying to read the router and then gives me the error message "Needs Factory installed Username and Password". I went to the IP site and tried to see where I could delete my Username and Password and reinstall the Factory defaults but cannot locate it.
View 2 Replies View RelatedZG-5000-11g - Unable To Configure Router After Factory Reset?
Mar 8, 2011I have a (Air Access) - ZG-5000-11g Wireless Outdoor Bridge , Ap Router, It has hanging problem, so I make it factory default. but now I have unable to configure it. find out default ip address.
View 5 Replies View RelatedFactory Settings For Wireless Routers?
Nov 29, 2011i don't have the cd to set my wireless router back up, so how do I go back to factory setup without it?
View 2 Replies View RelatedFactory Reset PC And No Wireless Driver Exists
Dec 29, 2012I am the owner of an Asus N53SV series laptop running windows 7 home premium. I factory reset my PC in order to have a "fresh" new year, but now I can only connect to the wireless internet in my house using the ethernet cable. When the cable is unplugged, no networks show up for my laptop. I tried going to this link: ASUSTeK Computer Inc. -Support- Drivers and Download N53SV I downloaded the first wireless driver listed...and it gave me an error that just said "error azureware wireless lan driver"....not a very informative error.
View 13 Replies View Related