Linksys WRT160N Router Not Working After Pushing Reset Button?
Dec 14, 2011
I have a Linksys wireless router WRT160N, and its worked fine for the past year, till last night, when I pushed the reset button trying to solve another issue and now my router isnt working. I ran Linksys setup disc and it said I was all up and running, but still cant get online with my laptop through the router.I am at a point where I have my default gateway address 192.168.1.1 and my IP address, but not sure what to do with that to get this issue corrected.
View 14 Replies
ADVERTISEMENT
Jun 1, 2011
My sone pushed the reset button and now I cannot get the router to work. I can only connect to the internet if I am connected directly to my modem... the router does not recognize my computer (corresponding # does not light up on the the router). I have tried disconnecting everything and reconnecting everything but it doesn't work.I am using Windows7. How I can begin using the router again? (My knowledge with this I have had it for almost 2 years and is out of warranty... What can I do so I don't have to buy a new one?
View 4 Replies
View Related
Jul 18, 2012
Save and reset button is not working on Sys log Purge Settings page (Admin > Network > Purge Settings > Sys log Purge Settings) when Email: field is not empty. An Reset button is not working at all.This is the Cisco Prime LMS 4.2.1.
Is it only my LMS server or you all have this bug?
View 1 Replies
View Related
Dec 26, 2011
I can not get online, after a "Verizon" outage with my router connected, the Reset Button will not move. Can it be replaced? Or should I scrap the unit?
View 2 Replies
View Related
Apr 6, 2012
I reset my E1550 wireless router with the red button under it. Ever since then I can not connect to internet.
View 3 Replies
View Related
Aug 27, 2012
Mu old router WRT610n is not reachable anymore... The address 192.168.1.1 gives an error and I cannot reset the router by button press.Wireless doesn't work and two of the three the leds keep on blinking all the time... One ethernet connection is still functioning as should.
View 9 Replies
View Related
Oct 21, 2011
I bought a few months ago a WRT54gl router for home use. It works nice and everything, but today was the second time it totaly resetet without pressing the reset button. Why the router is resetting by its own?
View 1 Replies
View Related
May 13, 2013
I was given this router (it's my 3rd one) and cannot get the reset button to reset the password. I have run throught a 30/30/30 reset as well as just holding the button in for the standard 30 seconds.
I know the router works, as in i can ping it. It asks for a password when i go to 192.168.1.1, but *blank* and "admin" do not work. When i click the cancel button it displays a pink(salmon) screen that says "401 Unauthorized Authrization required". (all of this is when i am connected to it with an ethernet cable to #1)
When it's sitting there it has an led lit over power and one ove wlan which flickers from time to time.
View 1 Replies
View Related
Oct 3, 2011
I was in the Wireless tab>Basic Wireless Settings and then I clicked the "Reset Security" button. I don't know what that did but I've been completely shut out of my connection ever since and I don't know how to fix it. I tried doing the install sequence of the router just now (Clone MAC address, then release and renew DHCP, power cycle modem, router, and PC) but it still didn't work.
View 1 Replies
View Related
Dec 5, 2012
How will I reset WRT 160N?
View 1 Replies
View Related
Jun 7, 2010
How to reset my router to factory settings so i can install it on a new computer
View 2 Replies
View Related
Jul 21, 2012
Using router WRT160N when trying to change password system locks lost password and hit reset now everyone in neborhood can access my router running real slow now
View 4 Replies
View Related
Aug 7, 2011
I wanted to reset my IP address, so I called my cable internet service provider and they walked me through the process. I unplugged the ethernet cable from my router and connected my computer directly to my modem. Then, I unplugged the coax cable from my modem, plugged in back in again, and within Windows did ipconfig/renew in the command prompt. This successfully changed my IP address.
Then, I ran my wires back into the router again (instead of plugging the computer directly into the modem). To my surprise, the old IP address was back again! So, I went into linksys 192.168.1.1 screen to release the IP address and started the process over again.
I got a new IP address once again, but now the Linksys router can't seem to figure out the new IP address so nothing works going through the router.
View 1 Replies
View Related
Nov 17, 2011
I have two router WRT160N & WRT120 N . They are working successfully with different SSID. Now I need one SSID. Need if found wi-fi signal week Another wi-fi take care automatically.
View 5 Replies
View Related
Aug 24, 2011
I have a WRT160N v3 at home, it's been working well. I usually only have an old Toshiba Satelite on the network, which runs G IIRC.I had the network setup as open without a password (I don't really have any neighbors nearbye) however when a new computer tries to get on my network, I usually have to hit the 'sync' or w/e button on the router for the computer to get on. I'm happy with that setup, and it seems to have been working fine.
View 1 Replies
View Related
Oct 28, 2008
Since installing my WRT160N my printers have stopped working. All printer drivers have been removed including acrobat and my fax.
Even if I try reinstalling my drivers, I get the following error: Spooler SubSystem App has encountered a problem and needs to close.
Prior to this error my firewall was giving me constant warnings about Pure Networks Admin assistant application trying to access the same files(i.e. nmctxth.exe). Even though I allowed it still kept popping up.
I am using the online armor firewall on a Windows XP system. I cannot access the LinkSys Advisor anymore as it will not start.
View 4 Replies
View Related
Jan 1, 2013
know where is the reset button on my new SMCWBR14-G2 BARRICADE WIRELESS ROUTER ; I am using AIRTEL'SBROADBAND CONNECTION with IP ADDRESS as 192.168.1.3
View 1 Replies
View Related
Jan 30, 2011
I can't seem to login to my admin. the IP for me is 192.168.0.1 and I can't login. I tried resetting the router a few times and no luck.Is there ANY other way to reset the username and password?
View 6 Replies
View Related
May 28, 2011
It used to work, but just stopped. We have tried to reeinstall but it won't recognize the adapter. I cant click the next button to continue installation. I have changed USB ports and restarted the computer. I have unstalled Norton 360. But it still won't install.
View 3 Replies
View Related
Feb 6, 2013
How can I reset my N wireless router f5d8233-4v3? The reset button must have been pushed inside. I was setting it up as a repeater and then it keeps timing out.
View 1 Replies
View Related
Jun 13, 2013
According to the Belkin support tech, apparently the weather (?) may have effected my Belkin Model F5D8235-4 v3 router. My wife pressed the re-set button instead of powering down which according to the tech set my router to reading zero (0).Belkin tech refused to tell me how to re-set the router unless I paid $75 for a six month support plan because mine expired recently.
View 1 Replies
View Related
Apr 22, 2013
Why My Belkin Router F5D8236-4 Ver 2 always rebooting itself. the router lamp is on and then the security lamp is on and then the router rebooting itself. this happening because im push the reset button. im already try to upgrade the firmware with recovering tool (Boot Loader / Tiny Kernel Version v0.02) from 192.168.2.1 but the problem still happening.
View 3 Replies
View Related
Oct 3, 2012
I can't seem to reset my switch and realized the reset button is missing/broken off. Is there an alternate method to reset the switch to factory settings? If not, how do I figure out the IP of the web interface, it is not the default.
View 8 Replies
View Related
Apr 4, 2011
How do you reset a 1252ag access point that has the mode button disabled?
View 2 Replies
View Related
Jul 1, 2012
I had to reset my e1000 to reset my password but now when I plug my router back in it tells me that I am is connected to the internet; however, all web pages fail to load and yield a random error. I went to my default e1000 ip address (192.168.1.1)to try to do the setup, but after the setup (not sure if it even worked/did anything) it still would not connect. How can I get my Linksys e1000 connected again? I'm connected directly through my modem right now.
View 2 Replies
View Related
Nov 27, 2012
Just installed windows 8 on this laptop, everything is working fine, it has all the drivers etc. It does not seem to be picking up wireless for some reason. When I press the quick launch button for wireless absolutely nothing is happening, however it can pick up internet with the ethernet cable from the modem. Had a read of this and tried to install the FSC Launch Manager from the Fujitsu website still to no avail. Cant be the operating system either as it the same problem arose when i install a version of xp yesterday.
View 6 Replies
View Related
Jun 20, 2012
I'm having problems with the wireless button after I took my laptop apart to clean. The wireless button won't switch on at all and doesn't light up. When I press fn f8 nothing happens. I'm not sure what I've done. The wires are correctly in place as far as I can tell. I've tried the following things:Uninstalling the adapter in device manager and rebooting /Checked adapter is listed as working properly /Do a system restore /Check BIOS
View 4 Replies
View Related
Dec 29, 2011
My f5 button isn't working and now I cant turn on my wireless internet.
View 1 Replies
View Related
Mar 5, 2011
I am trying to hook my tv up to my wireless network but I cannot find the WPS key on my router? Is this necessary?
View 1 Replies
View Related
Oct 3, 2012
I just got my new router today but i don't see a power button on the back of this unit. Am i blind? Of course the unit comes on when i plug in the adapter but i don't see a on off switch.
View 7 Replies
View Related
Jan 3, 2013
I have a Linksys Wireless Router, model WRT54G. I read in the user manual that it is best to turn off the router when not in use for better security measures, but there in no power button on the router. So does this mean that the power cord would have to be unplugged from the electrical outlet each time to turn the router off? This is kind of inconvenient, especially where my cord is plugged in. Also would unplugging it from the outlet each time, would this mess up the settings on the router? Is it really necessary to turn it off?
View 9 Replies
View Related
Jul 23, 2011
i'm trying to use ACS 5.2 with ASA 8.4 / 8.2 , the authentication phase pass but the DACL not working .by the way the ACS 4.2 + ASA works and the DACL works too.is there any additional configuration should i did it at ACS / ASA to download the ACL . i tried to use Static / dynamic ACL in the authorization profile .
View 1 Replies
View Related
Apr 24, 2012
I am working on installing a new 2500 Controller with 2 AIR-LAP1242G's attached to it. I have both registered and on the controller but I am having trouble moving one of them to a new IPS AP group that I created. Furthermore, I noticed the default gateway is missing from the static ip settings and I am unable to add that as well. When I add the default gateway and hit apply, the controller does nothing. Same thing for when I try to change my WIPS device to monitor mode.
A couple other things that I noticed is that when I go to AP groups and try to remove the AP's from the default group, there is no remove button when you go inside the default group like I see when i go into my IPS group.The AP's are on software ver 12.4(23c)JA3 Boot ver 12.4.13.0 and the controller is at 7.0.22.0I have already power cycled the controller and both AP's.
View 1 Replies
View Related
