Just installed windows 8 on this laptop, everything is working fine, it has all the drivers etc. It does not seem to be picking up wireless for some reason. When I press the quick launch button for wireless absolutely nothing is happening, however it can pick up internet with the ethernet cable from the modem. Had a read of this and tried to install the FSC Launch Manager from the Fujitsu website still to no avail. Cant be the operating system either as it the same problem arose when i install a version of xp yesterday.
I have sorted out one issue but now i have another - the famous Wifi switchHave installed newest drivers plus the launch manager that appears to do nothing also the intel software package to manage networks.XP has found and installed the card but show not connected in bottom right of screen and cant find any networks.The intel app says radio is turned off but the switch does nothing to solve this. Cant see anything in the bios
I'm having problems with the wireless button after I took my laptop apart to clean. The wireless button won't switch on at all and doesn't light up. When I press fn f8 nothing happens. I'm not sure what I've done. The wires are correctly in place as far as I can tell. I've tried the following things:Uninstalling the adapter in device manager and rebooting /Checked adapter is listed as working properly /Do a system restore /Check BIOS
I am working on installing a new 2500 Controller with 2 AIR-LAP1242G's attached to it. I have both registered and on the controller but I am having trouble moving one of them to a new IPS AP group that I created. Furthermore, I noticed the default gateway is missing from the static ip settings and I am unable to add that as well. When I add the default gateway and hit apply, the controller does nothing. Same thing for when I try to change my WIPS device to monitor mode.
A couple other things that I noticed is that when I go to AP groups and try to remove the AP's from the default group, there is no remove button when you go inside the default group like I see when i go into my IPS group.The AP's are on software ver 12.4(23c)JA3 Boot ver 12.4.13.0 and the controller is at 7.0.22.0I have already power cycled the controller and both AP's.
It used to work, but just stopped. We have tried to reeinstall but it won't recognize the adapter. I cant click the next button to continue installation. I have changed USB ports and restarted the computer. I have unstalled Norton 360. But it still won't install.
I've been told that connecting wirelessly with a fujitsu is very difficult. systems use windows to connect, however i've been told that fujitsu block the windows attempt as it has its own settings/system it wants to use (some form of default). I have been told there is a way to connect 'blocking' the fujitsu attempt to stop connection via windows and it will work.
I have a Linksys wireless router WRT160N, and its worked fine for the past year, till last night, when I pushed the reset button trying to solve another issue and now my router isnt working. I ran Linksys setup disc and it said I was all up and running, but still cant get online with my laptop through the router.I am at a point where I have my default gateway address 192.168.1.1 and my IP address, but not sure what to do with that to get this issue corrected.
Save and reset button is not working on Sys log Purge Settings page (Admin > Network > Purge Settings > Sys log Purge Settings) when Email: field is not empty. An Reset button is not working at all.This is the Cisco Prime LMS 4.2.1.
Is it only my LMS server or you all have this bug?
I want to add hoc to my laptop in order to share internet connection with my cell phone so I'm searching under network center to share computer-to-computer internet connection ,but this icon didn't appear and I don't why. I really want internet to my mobile
On my laptop I have intermittant problems printing to my wireless printer due to slow speeds and timiming out, also loading online pages seems very slow.I have 2 of these fujitsu laptops and they both behave roughly the same.
Intel Pro/wireless 3945ABG driver 10.1.1.7
I have not updated it, and not sure if it should come from fujitsu or intel anyway setting on network adapter:power management - default - based on computer preformance (I tried changing to highest-did not work)transmit power - default- highest power setting (cannot change for some reason)this is from this laptop.
wired speed is 13M down 0.81 up, wirelss varies from 1-1.7M 0.78 -0.8 up
I have a 15M package.I downloaded Xirrus, attaching the screenshot. My network is highlighted.here are some of what I can find:
Speedtest Wired down 13.2M up 0.81 ping 10ms wirless down (varies)1-1.7M up 0.78 ping 26-104ms Dlink DVA-G3810BN/TL setting: 802.11bg mixed WPA/AES
I have an Amilo Pa1510 (Windows XP) and I can connect to the router but not surfing (browser doesnt load any website). I have tried the commands "ping" to my IP address and it works but ping to the default gateway IP address doesnt work either.I am using the same wireless connection right now with my smartphone. I have downloaded an app that executes the ipconfig command in my Android. I have used the same gateway IP address in my laptop but it didnt work either. I have tried to set automatically the IP addresses in my laptop without success too. I have turned off and on both laptop and router and also checked in the system window that all the processes such as DHCP and DNS servers are automatic and enabled.
Today my Fujitsu laptop failed to connect. I assumed it was the laptop but after connecting my mobile to my router, my phone wouldnt work. After approx 2 hours on the phone to TalkTalk engineers and testing with another laptop, and getting my phone working by entering a password into my phone (that I believe was already in there), the guy said my laptop is bust due to something breaking inside that prevents connectivity. I cant remember what he called it now, maybe something like 'wireless connectors', but that could be totally wrong on my part.As I sidenote, I noticed the laptop took ages to reach the desktop screen, then the picture behind the icons had expanded slightly so I couldnt see the edges of the picture, and the icons were slightly fuzzy/blurry.
I have an esprimo fujitsu seimens laptop and have just purchased a kodak esp 3.2s printer. I have a belkin router and am unable to install the printer, it is not recognising the router.
I am trying to connect my LED Samsung Series 6300 TV to the internet. I have Samsung wireless LAN adaptor WIS09ABGN inserted into TV and I am using LINKSYS wireless home router WRT12ON-CA.
i have a laptop that has a wireless button on the front and every time i try to click it to turn it on, it wont even blink. On the wireless networks, all it says is hat no connections are available. get my wireless network button on my laptop to turn on somehow?
i have an hp laptop that has a wireless button on the top right hand of the typing area. It has turned red before and all i had to do was push the button and it would turn gree. It has gone red again and when i push the button it stays red.
My keyboard was broken so plugged in a USB keyboard that doesn't have a fn button. I must have accidentally pressed something as my comp is asking me to turn in the wireless capability. There is no button on the computer and the light for wifi is off. How to turn this back on with a keyboard that does not have a fn button?
i have an hp laptop that has a wireless button on the top right hand of the typing area. It has turned red before and all i had to do was push the button and it would turn gree. It has gone red again and when i push the button it stays red.
I am trying to set a wireless connection and it says that the Wifi isn't on, which I believe, because I don't even know where the Wifi button is. And the computer didn't come with an owner's manual with a diagram of where and what every button is. Trying to set up PC for bf for Christmas. I am a mac user :P so I have lost my touch with PC's.
I got a new HP laptop running Windows 7. When I turn on my laptop, my wireless is off. So I click on F12 (my wireless button), to activate my wireless. The orange light turns blue. Even though the light indicates that my wireless is on, I have to go to device manager>networking>802.11n>advanced then activate my radio for my laptop to pick up the wireless signals. The problem is that I have to do this every time I turn on my laptop, and its getting quite repetitive.
I just got my new router today but i don't see a power button on the back of this unit. Am i blind? Of course the unit comes on when i plug in the adapter but i don't see a on off switch.
I have a Linksys Wireless Router, model WRT54G. I read in the user manual that it is best to turn off the router when not in use for better security measures, but there in no power button on the router. So does this mean that the power cord would have to be unplugged from the electrical outlet each time to turn the router off? This is kind of inconvenient, especially where my cord is plugged in. Also would unplugging it from the outlet each time, would this mess up the settings on the router? Is it really necessary to turn it off?
Bought the Zyxel Wireless Range Extender to get wifi in farthest rooms in my house but set up is not working because BT have disabled WPS button on Home Hub 3 with my Infinity. Therefore they suggest I try manual set up. This requires browser wtih IP address 192.168.1.2 for Zyxel wireless extender WRE2205, This gives no result (page does not load in IE).
When adding a device that has a web protected setup button, can I use the web protected setup button on my Linksys E2000 router to set up the device even though I setup up my router using the Manual setup on the Web Interface configuration?
I can not get online, after a "Verizon" outage with my router connected, the Reset Button will not move. Can it be replaced? Or should I scrap the unit?
