According to the Belkin support tech, apparently the weather (?) may have effected my Belkin Model F5D8235-4 v3 router. My wife pressed the re-set button instead of powering down which according to the tech set my router to reading zero (0).Belkin tech refused to tell me how to re-set the router unless I paid $75 for a six month support plan because mine expired recently.
View 1 RepliesIs there a way to avoid network interruptions when resetting the F5D8235-4 v3 router? I was hoping to find a config file or some other way to avoid having to reset the home network and devices. The administrator password has been lost, so i would like to reset that only and not restore factory settings.
View 1 Replies View RelatedHow can I reset my N wireless router f5d8233-4v3? The reset button must have been pushed inside. I was setting it up as a repeater and then it keeps timing out.
View 1 Replies View RelatedWhy My Belkin Router F5D8236-4 Ver 2 always rebooting itself. the router lamp is on and then the security lamp is on and then the router rebooting itself. this happening because im push the reset button. im already try to upgrade the firmware with recovering tool (Boot Loader / Tiny Kernel Version v0.02) from 192.168.2.1 but the problem still happening.
View 3 Replies View RelatedTwo desktop computers are hard-wired to Belkin F5D8235-4 v1000(Firmware Version 1.01.19. When second computer is initialized, first computer slows to a crawl online. Comcast technician says modem is fine, but router appears to be the problem. Cannot find the extension .bin to download upgraded firmware and I don't know whether or not that will work. Is it time to purchase a new Belkin?
View 1 Replies View RelatedI have a F5D8235-4 N+ router and I am trying to connect my Seagate Free Agent hard drive to the USB port on the router so that I can access it on all my network computers. When I first hooked it up, it worked. Now, the drive is lit up like it is working, and when I enter \192.168.2.1 I can see it, however my Windows 7 computer is unable to access it (even though this is the same computer that accessed it when I first hooked it up). The computer I am using is running Windows 7 and is connecting to the network wireless.
View 2 Replies View RelatedMy F5D8235-4 v.2 N+ suddenly stopped working. The security and modem lights are solid lavender and the storage light is solid amber. The router light is solid blue. Internet has no light.
View 1 Replies View RelatedMy F5D8235-4 v3 constantly looses it's DHCP service and needs to be rebooted.
View 1 Replies View RelatedSwapping cable modem SB5101 that has been working for years for newer one SB6121. F5D8235-4 v2000 router has been working with SB5101 for years. When I connect using same cable/etc. Router cannot get DNS/IP from ISP (Comcast). Cable modem works directly connected to my laptop. Switched back to SB5101 and works again flawlessly. FW on router is 2.01.07. Had comcast tech support as well as comcast tech onsite- no resolution. I did activate new modem thru ISP (even with them here doing it).
View 8 Replies View RelatedWhen i try to update the firmware it tells me the it is an incompatible update.ive followed all the instructions.my model number is f5d8235-4 v2.i have downloaded the correct version for the firmware update (2).
View 5 Replies View RelatedN+ requires constant reboots to maintain speed. When I reboot the router F5D8235-4 v3 it will run at top speed of 10mbps, after a day or two it slows to about 2mpbs. A reboot will speed it up again. I would prefer that it run fast all the time. Firmware 3.00.15
View 12 Replies View RelatedI have a BELKIN F5D8235-4 V2 wireless router and I am trying to hook up my Western Digital My Book Essentials 2.0 1 TB hard drive to gain access wirelessly through the router. I have it connected to the router via USB but do not know how to access the drive. I have tried mapping a new network drive, but it is not listed as a connection. how can I access the drive.
View 1 Replies View RelatedBelkin storage manager sees my 8Gb flash drive for a split second and the pops up a message about unmounting. When it connects for a split second it shows up wit a drive letter, but then disappears again.
View 2 Replies View RelatedDoes the Blekin N1 Vision have a WPS button? I'm trying to add an extender.
View 1 Replies View RelatedI am using a Belkin AC1000 DB Wifi Dual-band AC+ Gigabit Router with the Belkin Router Monitor on a Macbook Pro (mid 2012) running OS X 10.8.2. I recently installed the router and the Belkin Router Monitor and everything works very well. I have one concern, however: the menu button on the finder bar is not illuminated blue, as it should be, but gray.
View 1 Replies View RelatedOn Page 16 of my N600 DB manual it says that below the "Router Status Light" and above the "WPS" letters there is a "Wi-Fi Protected Setup (WPS) Light and Button". When I look at my router all I see in this space is a raised rectangular plastic strip. Should I have a light and button there?
View 1 Replies View Relatedit is normal for the WISM2 time to be resetted to default of 1 Jan 2000 after rebooting the 6506E if no NTP is configured?I had to configure it back to the correct time. If not, the APs will not come up.Also, does the ap or wlc keep track of the ap group the ap is provisioned to?
View 3 Replies View RelatedI have the following router (belkin f5d8235-4). I wanted to replace the 2 antenna's with high gain ones. if the antenna is removable and how do i remove it?
View 1 Replies View RelatedI have a the aforementioned router set up with one PC laptop connected via ethernet cable and two to five other devices (PC laptops, iPhone, iPad, Linux Laptop) connected at any given time. About once or twice a week the router drops the network. I can still see the SSID, but can't connect on any device. The wired laptop gets dropped as well. I tried to ping its IP, but it says the device is unreachable. The only solution is to walk upstairs and unplug the router, which fixes it every time until a few days later when it happens again. I've restored factory settings a number of times.
View 8 Replies View RelatedI have a belkni F5D Router and I have lost the password to access it. I dont have any computers or devices that still connect to it, and I really need to know how to hard reset the password!
View 2 Replies View Relateddisconnected for 30 seconds and reattached power-still no lights or service. Reset button still no lights or service?
View 1 Replies View RelatedWhat buttons, in specific order, do i press to reset my router? i used to know how but can no longer find that info
View 2 Replies View RelatedI'm trying to re setup my mother in laws Belkin F9K1002 wireless router. She has no clue as to what her password is for the wireless network or any other Belkin password. When I go to the support website, there are instructions to reset the network password, but you have to login to change the settings. The instructions say to leave the password field at the login blank but when I leave the field blank, I get an error message "Incorrect password. Please confirm your password and try again." So it seems I need the password to reset the password.
View 1 Replies View Relatedi need step by step instruction to disconnect and reset my Belkin 450 DB router
View 1 Replies View RelatedI've just hooked up my previously used N300 router. The router is showing a solid green light, and the laptop recognizes that a solid Belkin wireless connection is out there. I cannot for the life of me remember the network key and/ or pass phrase I originally set. No, I did not tape this info to the underside of the router as suggested in Belkin instructions.
View 6 Replies View RelatedI need to reset the channel on my N300 router but in order to do so, I need to log in. The log in screen does not take my existing password. How do I get my current password or reset my password? It should be the simplest thing, but I have found this to be extremely difficult with Belkin.
View 1 Replies View Relatedi forgot my admin password and i want to know if there is a way to retrieve or reset it. I have the enhanced wireless router model F6D4230-4 V1
View 3 Replies View RelatedI upgraded my internet connection through charter and they shipped a new modem. Installed my new modem and my 300n will not connect to it. So in my attempts to figured things out I went it in and set it up as an access point only. I can access the internet on my desktop but there is no wireless signal in the house. Cannot connect to 192.168.2.1 now either. Tried the manual reset to factory defaults with no luck. At this point all I get is the small flashing blue light and the tall skinny light is not on at all.
View 5 Replies View Relatedi forgot my password for my belkin n150 wireless router so now it wont let me change any of my settings.i called tech support and all they wanted to do is get into my computer and sell me security progams .when i told them no they wouldnt reset my password and hung up.
View 2 Replies View Relatedknow where is the reset button on my new SMCWBR14-G2 BARRICADE WIRELESS ROUTER ; I am using AIRTEL'SBROADBAND CONNECTION with IP ADDRESS as 192.168.1.3
View 1 Replies View RelatedWhat do I do if my routers light stays amber and wont turn blue? The wifi is not working because of this even though it is saying the signal strength is excellent and I have already done the reset a bunch of times its been two days and I just cant get it to work. Its the N300 router
View 2 Replies View RelatedI'm am getting a "Could not find DHCP daemon" error in the router log (N300 router), but when I connect my cable modem directly to my computer it gets an IP address just fine so I doubt the problem is with my modem or ISP. I've tried resetting the modem and router multiple times but no luck.
View 2 Replies View RelatedI can't seem to reset my switch and realized the reset button is missing/broken off. Is there an alternate method to reset the switch to factory settings? If not, how do I figure out the IP of the web interface, it is not the default.
View 8 Replies View Related