Belkin storage manager sees my 8Gb flash drive for a split second and the pops up a message about unmounting. When it connects for a split second it shows up wit a drive letter, but then disappears again.
View 2 RepliesSwapping cable modem SB5101 that has been working for years for newer one SB6121. F5D8235-4 v2000 router has been working with SB5101 for years. When I connect using same cable/etc. Router cannot get DNS/IP from ISP (Comcast). Cable modem works directly connected to my laptop. Switched back to SB5101 and works again flawlessly. FW on router is 2.01.07. Had comcast tech support as well as comcast tech onsite- no resolution. I did activate new modem thru ISP (even with them here doing it).
View 8 Replies View RelatedMy F5D8235-4 v3 constantly looses it's DHCP service and needs to be rebooted.
View 1 Replies View RelatedI have a F5D8235-4 N+ router and I am trying to connect my Seagate Free Agent hard drive to the USB port on the router so that I can access it on all my network computers. When I first hooked it up, it worked. Now, the drive is lit up like it is working, and when I enter \192.168.2.1 I can see it, however my Windows 7 computer is unable to access it (even though this is the same computer that accessed it when I first hooked it up). The computer I am using is running Windows 7 and is connecting to the network wireless.
View 2 Replies View RelatedI have a BELKIN F5D8235-4 V2 wireless router and I am trying to hook up my Western Digital My Book Essentials 2.0 1 TB hard drive to gain access wirelessly through the router. I have it connected to the router via USB but do not know how to access the drive. I have tried mapping a new network drive, but it is not listed as a connection. how can I access the drive.
View 1 Replies View RelatedWhen i try to update the firmware it tells me the it is an incompatible update.ive followed all the instructions.my model number is f5d8235-4 v2.i have downloaded the correct version for the firmware update (2).
View 5 Replies View Relatedbelkin wireles g router F5D7230 4 v2000 need driver i lost setup cd
View 1 Replies View RelatedTwo desktop computers are hard-wired to Belkin F5D8235-4 v1000(Firmware Version 1.01.19. When second computer is initialized, first computer slows to a crawl online. Comcast technician says modem is fine, but router appears to be the problem. Cannot find the extension .bin to download upgraded firmware and I don't know whether or not that will work. Is it time to purchase a new Belkin?
View 1 Replies View RelatedAccording to the Belkin support tech, apparently the weather (?) may have effected my Belkin Model F5D8235-4 v3 router. My wife pressed the re-set button instead of powering down which according to the tech set my router to reading zero (0).Belkin tech refused to tell me how to re-set the router unless I paid $75 for a six month support plan because mine expired recently.
View 1 Replies View RelatedIs there a way to avoid network interruptions when resetting the F5D8235-4 v3 router? I was hoping to find a config file or some other way to avoid having to reset the home network and devices. The administrator password has been lost, so i would like to reset that only and not restore factory settings.
View 1 Replies View RelatedMy F5D8235-4 v.2 N+ suddenly stopped working. The security and modem lights are solid lavender and the storage light is solid amber. The router light is solid blue. Internet has no light.
View 1 Replies View RelatedN+ requires constant reboots to maintain speed. When I reboot the router F5D8235-4 v3 it will run at top speed of 10mbps, after a day or two it slows to about 2mpbs. A reboot will speed it up again. I would prefer that it run fast all the time. Firmware 3.00.15
View 12 Replies View RelatedF7D2401 was constantly dropping out fixed the problem through the server but now my iPad and toshiba lap top wont join just say unable to join network but phone and other iPad are working fine
View 2 Replies View RelatedI have an RV016 V3 with firmware 4.2.1.02 that is constantly rebooting making it unusable. I have one LAN connect and 3 WAN's, 2 DSL's and one Cable Internet in a load balance config. I have tried firmware 4.2.1.01 and it reboots also. do I get and RMA from Linksys and send this pig back?
View 6 Replies View Related(F5D9230-4 v5111 Belkin mimo router ) is version 5.02.08 the most up to date firmware for my router?
View 1 Replies View RelatedI have recently purchased a Belkin n300 wireless N router. The problem is, I have to reboot the thing numerous times throughout the day to allow a client to connect to it via wireless. One client will be connected and then drop, or a client will be connected, and I cannot connect another device. I also had an issue with streaming over wireless for netflix on my devices and the only way I could get it to work was to turn off the firewall, what the hek.... This is crap. I knew I should not have bought a belkin router again. Had one years ago and it constantly gave me issues. Had my Linksys Wrt54G for years with no problems until it finally crapped out. Anyways, my firmware version is the latest version according o the website.
View 6 Replies View RelatedI have the following router (belkin f5d8235-4). I wanted to replace the 2 antenna's with high gain ones. if the antenna is removable and how do i remove it?
View 1 Replies View RelatedI cannot map a network drive over a VPN. I am asked for login credentials, but no credentials are required, per the IT guy. He says that it's a Port 47 issue. How do I allow traffic via Port 47? Router F5D7231-4
View 1 Replies View RelatedMy N750, F9K1103 v1, with the latest firmware, 1.10.16n (2012/12/12 3:46:9), does not recognize the external hard drive when I plug it in. My USB printer works great, but not the hard drive.
View 2 Replies View RelatedMy ISP is Comcast and I own a Belkin N750 DBWireless N+ Router, I have a Synology NAS drive wired to the router. I am trying to set up the network configuration on the NAS drive so I can have internet access to the drive. My question is do I manually define the IP address, subnet mask, DNS, and gateway or do I select DHCP. If so what addresses should I use the address of the NAS drive form the router or the router address. I think I need to use the manual fields and use a static IP but do I get that IP address from the router or from my ISP (comcast)?
View 2 Replies View RelatedI wanted to set Belkin Share Max n300 as an access point. I followed the instructions, set the IP address to the suggested one and connected it to the main router. It worked, computer connected to the Belkin via wire was getting IP address from DHCP on main router. But: The Belkin device itself became invisible. I lost connection to Belkin device via config page via HTTP. It does not respond to any IP address so I actually cannot use it for purpose I wanted to set up secondary Wi-fi, I just cannot configure it. Also I wanted to use USB ports of the Belkin to connect external drives. I cannot do it as well. More over it does not go back. It does not reset to the original router option.
View 2 Replies View RelatedI have a Western Digital Mybooklive 3Tb hard drive connected to my N750 wireless router. It works fine, except that the new Media Server and the USB print and storage center says there are no USB devices plugged into it! Why is this?
View 1 Replies View RelatedI have a the aforementioned router set up with one PC laptop connected via ethernet cable and two to five other devices (PC laptops, iPhone, iPad, Linux Laptop) connected at any given time. About once or twice a week the router drops the network. I can still see the SSID, but can't connect on any device. The wired laptop gets dropped as well. I tried to ping its IP, but it says the device is unreachable. The only solution is to walk upstairs and unplug the router, which fixes it every time until a few days later when it happens again. I've restored factory settings a number of times.
View 8 Replies View RelatedI have a 1TB hard drive connected to my N600DB that I use as a media server to my kids Xbox... My problem is that I use this drive to back up all my data from my laptop, including movies, pictures and music. I only want to share the movies... I have over 5000 pictures alone so my router never gets to index all the movies I want to share..
P.S. I have the F9K1102 v1 with Firmware 1.00.19
I am trying to update my firmware from v1 to v2 on my F5D9231-4 Router, after downloading from the support page and trying to install it I get the following error "Upgrade file is not the correct type or version for this device. Upgrade failed. Please obtain the correct file and try again" I double checked the model numbers.
View 2 Replies View Relatedit wants me to download something for a bin file, is it safe?
View 1 Replies View RelatedI was going to update my firmware and the update for F5D8236-2 says it is version 2.01.03. At looking in my router it currently has version 2.01.06 (Jul 2 2009 22:24:38)Which should I be using?
View 1 Replies View RelatedIs there firmware available to support the 4-port Cable/ DSL Gateway Router model # F5D5231-4 Ver: 1103. The router is several years old and the installation guide suggests checking the Belkin web site for a Mac installation wizard. I don't see any ref. to a Mac down load there.
View 1 Replies View RelatedWhat is the latest firmware version for the F9K1109? I found a link to the 1.10.16 code and downloaded it upgraded the firmware but the website seems to indicate 1.00.49 is the latest.
View 4 Replies View RelatedF5D8233-4 N Wireless Router - Firmware Update,l I am trying to upgrade the firmware of this router which currently it's 3.01.29 to the latest one which is 4.00.04 but every time I try to manually install it, it comes back with an error message saying it's not the tight update but it is.
View 1 Replies View RelatedTried to install a n600 DB on a windows 8 computer. Got the message "Not compatible. When will it be?
View 1 Replies View RelatedI'm a bit confused about Belkin's firmware upgrading. I lookup the firmware for my router N600 (F9K1102v1) and see that I've got options for v1, v2, and v3. Is it possible to upgrade my router to the v3 firmware? I'm guessing that I can't because its a v1 router, but just thought I'd ask just in case I can. Don't want to brick the thing.
View 2 Replies View RelatedCan't download newest firmware for F9K1102/N600 DB Router. I am on 1.00.19 and there are two newer firmwares, the latest being 3.03.12. This firmware is suppose to allow support for Windows 8. All my computers now have Windows 8 so I want this firmware, but I can't download it because the link provided by belkin no longer exists
View 3 Replies View Related