Belkin Routers :: Difference Between F5D8235-4 V2000 And Motorola Sb6121
Dec 14, 2012
Swapping cable modem SB5101 that has been working for years for newer one SB6121. F5D8235-4 v2000 router has been working with SB5101 for years. When I connect using same cable/etc. Router cannot get DNS/IP from ISP (Comcast). Cable modem works directly connected to my laptop. Switched back to SB5101 and works again flawlessly. FW on router is 2.01.07. Had comcast tech support as well as comcast tech onsite- no resolution. I did activate new modem thru ISP (even with them here doing it).
View 8 Replies
ADVERTISEMENT
Feb 14, 2013
Belkin storage manager sees my 8Gb flash drive for a split second and the pops up a message about unmounting. When it connects for a split second it shows up wit a drive letter, but then disappears again.
View 2 Replies
View Related
Feb 9, 2013
belkin wireles g router F5D7230 4 v2000 need driver i lost setup cd
View 1 Replies
View Related
Dec 17, 2012
Two desktop computers are hard-wired to Belkin F5D8235-4 v1000(Firmware Version 1.01.19. When second computer is initialized, first computer slows to a crawl online. Comcast technician says modem is fine, but router appears to be the problem. Cannot find the extension .bin to download upgraded firmware and I don't know whether or not that will work. Is it time to purchase a new Belkin?
View 1 Replies
View Related
Jun 13, 2013
According to the Belkin support tech, apparently the weather (?) may have effected my Belkin Model F5D8235-4 v3 router. My wife pressed the re-set button instead of powering down which according to the tech set my router to reading zero (0).Belkin tech refused to tell me how to re-set the router unless I paid $75 for a six month support plan because mine expired recently.
View 1 Replies
View Related
Nov 2, 2012
I have a F5D8235-4 N+ router and I am trying to connect my Seagate Free Agent hard drive to the USB port on the router so that I can access it on all my network computers. When I first hooked it up, it worked. Now, the drive is lit up like it is working, and when I enter \192.168.2.1 I can see it, however my Windows 7 computer is unable to access it (even though this is the same computer that accessed it when I first hooked it up). The computer I am using is running Windows 7 and is connecting to the network wireless.
View 2 Replies
View Related
Jan 4, 2013
Is there a way to avoid network interruptions when resetting the F5D8235-4 v3 router? I was hoping to find a config file or some other way to avoid having to reset the home network and devices. The administrator password has been lost, so i would like to reset that only and not restore factory settings.
View 1 Replies
View Related
Oct 24, 2012
My F5D8235-4 v.2 N+ suddenly stopped working. The security and modem lights are solid lavender and the storage light is solid amber. The router light is solid blue. Internet has no light.
View 1 Replies
View Related
Jun 27, 2012
I'm using comcast broadband, motorola SB6121 modem and a edimax br-6424n wireless router.I set up everything myself and it worked great for 3 weeks.Usually, I have 2 laptops connected and iPad.[CODE]
View 1 Replies
View Related
Nov 19, 2011
I can't seem to get DIR-655 to communicate with Motorola SB6121 cable modem. Don't know if it has anything to do with the old firmware 1.21?? Should I update the firmware? If so, which version?
View 14 Replies
View Related
Jun 23, 2013
Recently changed modems because of ongoing issues with Mediacom's loaner. I now have a Motorolla SB6121 and use an Airport Extreme router. I've used the Dell in the passed with the apple router, and several different modems and all was fine... but for some reason this hookup is not working for my Dell Studio. It sees the network, but will not connect to it. I did nothing different other than plug everything in. No other computer has an issue with this connection - only the Dell.
View 1 Replies
View Related
Dec 27, 2012
My F5D8235-4 v3 constantly looses it's DHCP service and needs to be rebooted.
View 1 Replies
View Related
Feb 23, 2013
When i try to update the firmware it tells me the it is an incompatible update.ive followed all the instructions.my model number is f5d8235-4 v2.i have downloaded the correct version for the firmware update (2).
View 5 Replies
View Related
Oct 14, 2012
N+ requires constant reboots to maintain speed. When I reboot the router F5D8235-4 v3 it will run at top speed of 10mbps, after a day or two it slows to about 2mpbs. A reboot will speed it up again. I would prefer that it run fast all the time. Firmware 3.00.15
View 12 Replies
View Related
Dec 2, 2012
I have a BELKIN F5D8235-4 V2 wireless router and I am trying to hook up my Western Digital My Book Essentials 2.0 1 TB hard drive to gain access wirelessly through the router. I have it connected to the router via USB but do not know how to access the drive. I have tried mapping a new network drive, but it is not listed as a connection. how can I access the drive.
View 1 Replies
View Related
Aug 18, 2012
My Motorola SB6121 DOCSIS 3 modem is connected to a Medialink n-band router. Sometime in the morning (usually between 7am and 9am, the router loses the ability to see the modem. I can access the router's control panel, and I see 0.0.0.0 for WAN IP, Subnet Mask, and Gateway. Primary and Secondary DNS server are both blank. Connection Mode is Dynamic IP.I lose the ability to access the modem's control panel directly (192.168.100.1), even though the PC I use is hardwired to the router. So, I unplug the modem, unplug the router, wait, plug in the modem, plug in the router, and everything works again.I've had more than twelve service calls. Every Charter tech looks at the line, puts in boosters, takes out boosters, replaces splitters, and seems to only look at signal. I've BEGGED Charter to let me speak to an engineer, because my suspicion is that it's something to do with the DHCP server.
I did, by the way, replace EVERYTHING.I have had 5 different modems...same problem. I have had 5 different routers...same problem, including a modem/router combo.I've tried different brands, too.I've disconnected all wifi devices from the router, and rebuilt my PC's operating system. I've even unplugged the refrigerator, because one Charter tech claimed it was "upstream noise."I've been online only a few times when the system actually goes down. What I notice in the router logs is this: [code] So at 9:34, no ranging response - T3 timeout, followed by Unicast Ranging Received Abort Response;
then the Cable Modem Reboot due to T4 timeout, and the system time goes to 1/1/1970 at midnight. No ToD.
The last piece of information: Charter installed a second modem as a "test." That was originally in the same room. A month ago they did another line from the box directly to the test modem to skip the splitter on the house.That modem shows the same problems, EXCEPT -- not perfectly in sync. I might see the same error, but the time will be a few minutes and seconds off. And sometimes I'll see the errors, but the modem won't go down.Sometimes the first modem goes down, sometimes the second. I'm accustomed to a router "healing" itself when the modem goes down.It might be off for a bit, but then will re-establish. This Medialink doesn't do that. It forces a physical restart every day. There are other outages too, and all I get from Charter is "the signal strength is good."
View 3 Replies
View Related
Apr 22, 2012
I have a 192.168.1.xxx network connected to Verizon FIOS via Actiontec MOCA / router. I also have a 192.168.15.xxx network connected to Comcast via Motorola VT2442 router (used for Vonage) and a Motorola SB6121 cable modem.
Each network has it's own gigabit switch connected to each router. The two networks are physically separated but switches and routers are physically side by side.
What is the best configuration to allow devices on 192.168.1.xxx network to communicate with devices on the 192.168.15.xxx network (share printers, NAS, etc), but still have each network served by it's respective ISP, and each device still get it's dhcp, dns, gateway, etc from each respective router?
View 6 Replies
View Related
Jun 4, 2012
When I plug my desktop into my wireless router I have slow internet but when I plug directly into the modem I have no connection at all. It says "cannot connect to primary DNS server". I'm using a Motorola SURBOARD SB6121 and a NETGEAR WPN824V2 Wireless Router. When I do ipconig /all this is what I get:
View 11 Replies
View Related
Dec 10, 2012
I am connecting to internet via motorola modem which gives me approx 6 Mbps download speed when I test it with both speedtest.net and speakeasy.net. Any device that I use connected wirelessly to my Belkin N300 router only acheives about 1.3 MBps of download speed. Is this just the way it is or could I have a router configuration issue or something else?
View 2 Replies
View Related
Apr 10, 2011
I have the following router (belkin f5d8235-4). I wanted to replace the 2 antenna's with high gain ones. if the antenna is removable and how do i remove it?
View 1 Replies
View Related
Mar 7, 2012
I have a the aforementioned router set up with one PC laptop connected via ethernet cable and two to five other devices (PC laptops, iPhone, iPad, Linux Laptop) connected at any given time. About once or twice a week the router drops the network. I can still see the SSID, but can't connect on any device. The wired laptop gets dropped as well. I tried to ping its IP, but it says the device is unreachable. The only solution is to walk upstairs and unplug the router, which fixes it every time until a few days later when it happens again. I've restored factory settings a number of times.
View 8 Replies
View Related
Jan 7, 2012
Looking to add my belkin wireless router to Sbg6580 router as an access point to extend wireless. I've read up enough to understand the fundamentals - LAN to LAN, changing IPs, turn off DCHP etc. - but am confused by a couple of things.
First, belkin faqs says to Open the router page, click on "use as access point" (I get that) "Select Enable" (I also get that), and then it goes on to say "This will give you the options to set the IP Address and Subnet mask for the router.**These settings should match your existing network settings; by default the IP address will be set to 192.168.2.254 and the Subnet mask will be 255.255.255.0". Does this mean to set the IP address of the Belkin to that of the Motorola (which is 192.168.0.1) on this page?
Then the FAQ goes on to say access the LAN and "change the IP Address to something such as 192.168.2.47 or you can use 192.168.2.200.**As long as the first three sets of numbers match your existing network, you will be fine". I thought the LAN IP address should fall outside the DCHP range of the Motorola? So if the DHCP range for the Motorola is 192.168.0.2 through 192.168.0.250 then I'd assign 192.168.0.251 to the Belkin?
View 5 Replies
View Related
Apr 3, 2011
I've been trying to port forward my modem and router for Xbox 360 live. Only problem is, I know absolutely nothing about networking or configuring modem / router settings.Anyhow, I was told to put my modem into Bridged Ethernet mode. I tried, then I couldn't even connect to the internet anymore.my router model is a Belkin F5D7234-4 V5. My modem is a Motorola 2210-02-1006.
View 14 Replies
View Related
Sep 24, 2011
I have a Compaq Presario V2000 running Windows XP and whenever i close the lid of the laptop the wireless disconnects.
I have all of my power settings set to NOTHING. I have set the adapter, Minimum Power Consumption disabled, same with the Power Save Mode.
View 6 Replies
View Related
Aug 26, 2011
how do i open a port on Motorola modem
View 1 Replies
View Related
Apr 26, 2013
(F5D9230-4 v5111 Belkin mimo router ) is version 5.02.08 the most up to date firmware for my router?
View 1 Replies
View Related
Apr 17, 2013
My Compaq Presario V2000 (HP) using Win-xp3 will only connect to the internet using safe mode. When trying to connect in normal mode a message appears saying I cannot display webpage and what I can try is diagnose connection problems. When I click on diagnose problems it tells me that Windows cannot troubleshoot network connection because an error has occured.
View 3 Replies
View Related
Apr 26, 2013
How do I setup my Belkin F7D1301 with a 16 port 10/100 switch so I can use the wireless on the Belkin and have the 16 port switch for my hard wires?
View 1 Replies
View Related
Feb 21, 2012
Trying to set up the Cisco VPN router for remote acces to our network.We have ATT Uverse DSL and it is a Motorola Router, i think NGT 510.the Uverse router has very limited setup options.I cannot set it up as a bridge.The only thing I can figure out is to set the ip passthrough option to the VPN router.We have a static ip address for our internet service.
I have tried several setup and connection options, but cannot get it to work.
1. How to physically connect the routers and network devices?
2. How to setup both routers to play nice.
View 1 Replies
View Related
Jun 15, 2012
Motorola Surfboard 6121, Every since Com-cast has updated their network (two months ago), my Internet connection is VERY unstable.Com-cast says it is my problem because I can get reliable service at high speed using just my laptop: Win 7, and the Motorola modem. The modem does show high speed connection (blue light) when the only thing connected is the laptop.If I connect the rest of the home network; ,LinkSys BEFSR11 router, Netgear FS #108 10/100 switch, then my laptop. The Surfboard modems light turns orange (lower connection speeds). do I need to replace my NetGear switch and my router? This constant up and down intermittent connection is terrible!
View 4 Replies
View Related
Dec 22, 2012
My cable provider has installed a separate RCA DHG536 modem for my VoIP phone service alongside my SB5120 modem, and charges me $7 a month modem rental. I am upgrading the SB5120 to a DOC 3.0 modem and wonder if I can abandon the DHG536 modem?
View 2 Replies
View Related
Oct 1, 2011
I have a Windows 7 computer with Comcast HSI. It's a very fast computer, but the modem was really outdated. So was the router. So, we got a brand new Cisco N+ Router and a Motorola SURFboard SB6121 modem with DOCSIS 3.0 and IPv6. However, when plugged in, the new modem will not consistenly connect to the internet. We called Comcast and they tried to send an activation code to the modem with it connected to the computer directly, but it was intermittently going online, then offline, then back online, then offline. We exchanged the modem for an identical one, but it's doing the same thing, so the modem can't be at fault here. Comcast tried to tell us that something was wrong with our coaxial cable, but our old modem - a Motorola SURFboard 4100 running DOCSIS 1.1 - was working just fine with the same cable. Another technological "improvement" has failed me.
View 7 Replies
View Related
Feb 19, 2011
I currently have a Motorola modem, which is unreliable so I want to upgrade. What's the difference between modems and routers an what should I get? I don't need any ultra high-end thing just a reliable modem/router for surfing the Internet and some light gaming (mainly COD4).
View 8 Replies
View Related
