Belkin F5d8235-4 - Router Antenna Upgrade
Apr 10, 2011I have the following router (belkin f5d8235-4). I wanted to replace the 2 antenna's with high gain ones. if the antenna is removable and how do i remove it?
View 1 Replies
ADVERTISEMENT
Belkin F5D8235-4 V3 N+ Wireless Router Drops Entire Network Occasionally?
Mar 7, 2012I have a the aforementioned router set up with one PC laptop connected via ethernet cable and two to five other devices (PC laptops, iPhone, iPad, Linux Laptop) connected at any given time. About once or twice a week the router drops the network. I can still see the SSID, but can't connect on any device. The wired laptop gets dropped as well. I tried to ping its IP, but it says the device is unreachable. The only solution is to walk upstairs and unplug the router, which fixes it every time until a few days later when it happens again. I've restored factory settings a number of times.
View 8 Replies View RelatedBelkin Routers :: F5D8235-4 One Computer Slows Down When Other Is On
Dec 17, 2012Two desktop computers are hard-wired to Belkin F5D8235-4 v1000(Firmware Version 1.01.19. When second computer is initialized, first computer slows to a crawl online. Comcast technician says modem is fine, but router appears to be the problem. Cannot find the extension .bin to download upgraded firmware and I don't know whether or not that will work. Is it time to purchase a new Belkin?
View 1 Replies View RelatedBelkin Routers :: F5D8235-4 / Reset Button Instead Of Powering Down
Jun 13, 2013According to the Belkin support tech, apparently the weather (?) may have effected my Belkin Model F5D8235-4 v3 router. My wife pressed the re-set button instead of powering down which according to the tech set my router to reading zero (0).Belkin tech refused to tell me how to re-set the router unless I paid $75 for a six month support plan because mine expired recently.
View 1 Replies View RelatedBelkin Routers :: F5D8235-4 Can't Reach Hard Drive
Nov 2, 2012I have a F5D8235-4 N+ router and I am trying to connect my Seagate Free Agent hard drive to the USB port on the router so that I can access it on all my network computers. When I first hooked it up, it worked. Now, the drive is lit up like it is working, and when I enter \192.168.2.1 I can see it, however my Windows 7 computer is unable to access it (even though this is the same computer that accessed it when I first hooked it up). The computer I am using is running Windows 7 and is connecting to the network wireless.
View 2 Replies View RelatedBelkin Routers :: F5D8235-4 V3 Save Settings Before Reset?
Jan 4, 2013Is there a way to avoid network interruptions when resetting the F5D8235-4 v3 router? I was hoping to find a config file or some other way to avoid having to reset the home network and devices. The administrator password has been lost, so i would like to reset that only and not restore factory settings.
View 1 Replies View RelatedBelkin Routers :: Lavender Lights On F5D8235-4 N+ Modem?
Oct 24, 2012My F5D8235-4 v.2 N+ suddenly stopped working. The security and modem lights are solid lavender and the storage light is solid amber. The router light is solid blue. Internet has no light.
View 1 Replies View RelatedBelkin Routers :: F5D8235-4 V3 Constantly Looses DHCP Service?
Dec 27, 2012My F5D8235-4 v3 constantly looses it's DHCP service and needs to be rebooted.
View 1 Replies View RelatedBelkin Routers :: Difference Between F5D8235-4 V2000 And Motorola Sb6121
Dec 14, 2012Swapping cable modem SB5101 that has been working for years for newer one SB6121. F5D8235-4 v2000 router has been working with SB5101 for years. When I connect using same cable/etc. Router cannot get DNS/IP from ISP (Comcast). Cable modem works directly connected to my laptop. Switched back to SB5101 and works again flawlessly. FW on router is 2.01.07. Had comcast tech support as well as comcast tech onsite- no resolution. I did activate new modem thru ISP (even with them here doing it).
View 8 Replies View RelatedBelkin Routers :: F5d8235-4 Downloaded Correct Version For Firmware Update
Feb 23, 2013When i try to update the firmware it tells me the it is an incompatible update.ive followed all the instructions.my model number is f5d8235-4 v2.i have downloaded the correct version for the firmware update (2).
View 5 Replies View RelatedBelkin Routers :: F5D8235-4 V3 - N+ Requires Constant Reboots To Maintain Speed?
Oct 14, 2012N+ requires constant reboots to maintain speed. When I reboot the router F5D8235-4 v3 it will run at top speed of 10mbps, after a day or two it slows to about 2mpbs. A reboot will speed it up again. I would prefer that it run fast all the time. Firmware 3.00.15
View 12 Replies View RelatedBelkin Routers :: F5D8235-4 - Access An External Hard Drive Wirelessly?
Dec 2, 2012I have a BELKIN F5D8235-4 V2 wireless router and I am trying to hook up my Western Digital My Book Essentials 2.0 1 TB hard drive to gain access wirelessly through the router. I have it connected to the router via USB but do not know how to access the drive. I have tried mapping a new network drive, but it is not listed as a connection. how can I access the drive.
View 1 Replies View RelatedBelkin Routers :: F5D8235-4 - V2000 Firmware 2.01.09 Usb Drive Constantly Unmounts
Feb 14, 2013Belkin storage manager sees my 8Gb flash drive for a split second and the pops up a message about unmounting. When it connects for a split second it shows up wit a drive letter, but then disappears again.
View 2 Replies View RelatedConnect New Antenna Leads In Belkin F7D4302 Router?
Feb 7, 2012I have a Belkin Play N300 (part number = F7D4302) wireless router, and I want to connect my (soon-to-be-pole-mounted) 12DBI omnidirectional antenna to it, the goal is better wireless access in one area of a church camp. I have a couple of U.lf - RP-SMA pigtails on the way, because of course the router doesn't have an external antenna connection.
I opened up the router case, and below is a shot of the board. There's plenty of room inside the case. The router is dual-band (2.4 and 5ghz), and uses 2 internal antennae, apparently it senses the better one and uses it as needed.
My plan is to disconnect one antenna, and connect/solder my external antenna pigtail in its place. I'm a fair hand at soldering, but very little practice de-soldering...
1. Is disconnecting / replacing one antenna the way to go, and if so, which one? Or should I leave them both connected and piggyback my external onto one of them (soldering the leads on top of existing connections), or disconnect both antennae, or does it matter?
2. Which set of wires, white or black, are used for which band - and should I connect to? I assume I'd want to hook up to the 2.4ghz, correct?
The white wires come out from the tiny Broadcom chip, I think it's marked BCM43224KMLG (dang, that's some tiny print!). This page leads me to think that these are the 5ghz antenna leads, but I'd llike to be positive before I start cutting.
The black wires appear to feed from the larger Broadcom chip marked BCM4718A1KFBG. Again, this page leads me to think that this is the 2.4ghz antenna.
3. Assuming that the black wires are the ones I want, would it be ok to cut one really close to the board end, cut the U.fl connector off of my pigtail, prep the wire / shielding, and solder the wire / shielding on top of the existing solder connection?
WRT54G - How To Upgrade Antenna
Feb 28, 2012I have a Linksys WRT54G that I am providing for somebody, but their home is a bit larger and has a few weak signal spots. I would like to get upgraded antennas to replace the short 5-6" stock ones.
View 1 Replies View RelatedUpgrade Antenna To Increase Range?
Jul 18, 2011I have one AP with dual antennas and I want to upgrade one of the antenna to 7Dbi to increase the range. will it work
View 1 Replies View RelatedTP-Link Dual-Band Wireless :: Upgrade Antenna On WDR3600?
Feb 27, 2013Region : Brazil
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP :
I want to change the antennas on my wdr3600 to increase the range of the signal because my walls are too thick. I can not find TP link brand Dual Band Antennas, so I search ebay and found this:
[url]....
Any dual band RP-SMA antenna is compatible with the WDR3600? or do I need to search for something in particular?
Belkin Routers :: Universal Ranger Extender F5D7132 Is Compatible With 24dbi Antenna?
Oct 22, 2012I would like to know if my Universal Ranger Extender F5D7132 is compatible with a 24dbi antenna? What is it power level (mw)?
View 2 Replies View RelatedBelkin Routers :: F5D9231-4v1 Will Not Upgrade Firmware?
Mar 25, 2013I am trying to update my firmware from v1 to v2 on my F5D9231-4 Router, after downloading from the support page and trying to install it I get the following error "Upgrade file is not the correct type or version for this device. Upgrade failed. Please obtain the correct file and try again" I double checked the model numbers.
View 2 Replies View RelatedBelkin Routers :: F5D8233 4N Need To Upgrade The Firmware
Dec 30, 2012F5D8233-4 N Wireless Router - Firmware Update,l I am trying to upgrade the firmware of this router which currently it's 3.01.29 to the latest one which is 4.00.04 but every time I try to manually install it, it comes back with an error message saying it's not the tight update but it is.
View 1 Replies View RelatedBelkin Routers :: N150 Firmware Upgrade Giving File Format Error
Mar 19, 2013I bought belkin N150 recently. I tried to configure with my ISP. They are surprised how I don't have DHCP option in the wifi configuration and asked me to upgrade my firmware. When I tried to upgrade. I downloaded the firmware from [URL] tried to upgrade. It is showing file format error.
View 2 Replies View RelatedExtending Router Antenna With Wire?
Jan 31, 2012My housemates have been having a trouble with network coverage in my house, the router is located in the basement of my house, perfect for me as my room is also down there (Ethernet). Unfortunately my housemate in the attic room's signal seems to be a problem. I'm wondering if it would be possible to remove one of my routers two antennas solder some copper wire to the spot it was removed, then have the wire go up to the 1st floor and re-solder the antenna up there (mount it on the wall or something). I'm confident with the practicalities of actually doing this, but I'm not that techie when it comes to electronics. I'm not sure whether it would need more power to boost it over such a distance.
View 3 Replies View RelatedRemove Existing Antenna From N+ Router?
Aug 11, 2011How do I remove the existing antenna from my N+ router...?
View 3 Replies View RelatedD-Link DIR-601 :: Antenna For This Router Is Removable?
Aug 18, 2010If the antenna for this router is removable? The model I have doesn't seem like it is and I am afraid that I might break it if I try. I would like to connect an external antenna I have.
View 4 Replies View RelatedD-Link DIR-825 :: Does Any Antenna RP SMA Are Compatible With Router
May 4, 2011I know there a lot of threads on antenna for the DIR-825 but my question is ....does any antenna RP SMA are compatible with this router ? url...
View 3 Replies View RelatedHook-up An Antenna To Get A Stronger Signal To Router?
Sep 18, 2012I buy my wifi from the rv park that I live in how do I hook up an antenna to get a stronger signal to my router. I would have wifi coming in then my network going out .
View 1 Replies View RelatedWireless Router With External Antenna Connection?
May 10, 2012I'm looking for a router with an external antenna connection so I can attach an outside antenna to extend my wi-fi signal signal around my farm.Right now I have Hughes net internet service running to a Belkin 750 router, which is descent around the house, but has no connection for an external intenna.
View 3 Replies View RelatedESR750H - Looking For Wireless Router Antenna Suggestions
Aug 13, 2012I've just purchased an Genius ESR750H router which features two external and removable antennas. I know the range on this router is pretty decent but I'd like to find a set of antennas that would further increase the range for both the G and N wireless modes.
View 2 Replies View RelatedConnect Wireless Antenna Directly Input Router?
Nov 19, 2012My question is how can I use this existing wi-fi as input to a router to make a sub wi-fi for four computers and a wireless printer. Some of my computers may need to be wired into the router.
View 5 Replies View RelatedHow To Connect Alfa Wifi Antenna To Linksys Router
Jan 19, 2012I just purchased a alfa wifi antenna. It has the cable terminal usb. but my router only has Ethernet and internet cable connection.
I have there PC( 1 desktop and to laptops.
TP-Link 3G/3.75G Router :: TL-MR3220 Any Specific Antenna Or Type That Can Be Used
Dec 29, 2012]Region : Philippines
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.14.2
ISP : globe telecomms inc.
i just bought an antenna for my new tl-mr3220 v2 router that is 9db. my current one is he 5db that was supplied together wit the unit. then when i installed the new antenna, instead of an increase in the range it lower than my old one. is there any specific antenna or type that you can use? if so what types of antennas?
TP-Link 3G/3.75G Router :: Use MR3020 With MC760 Broadband2Go Antenna?
Apr 4, 2013Region : UnitedStates
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : Virgin Mobile with MC760 antenna
In remote areas, I use Virgin-Mobile's MC760 Broadband2Go antenna to provide Broadband to my netbook. This ISP service requires that you "sign in" with username and password to initialize the BB transmission. I would like to use my TL-MR3020 to host the Virgin-Mobile's Broadband2Go MC760 antenna to provide a wireless hotspot, instead of the hardwired direct-computer connection I have. I've gone thru the MR3020 quick setup with the MC760 but been unable to get it to connect. The 3020 is putting out the wireless signal...it's just not connected to my Virgin-Mobiles BB service...thus no www internet tie. how to use the MR3020 with Virgin-Mobile's MC760 (3G/4G) Broadband2Go antenna?
Linksys Wireless Router :: Add An External Antenna To WRT160Nv3?
Jul 30, 2011Is it possible to add an external antenna to this WRT160Nv3 router? Some spots are just on the one bar signal level that comes and goes.
View 1 Replies View Related
