If the antenna for this router is removable? The model I have doesn't seem like it is and I am afraid that I might break it if I try. I would like to connect an external antenna I have.
View 4 Replies
This may sound ignorant but I cannot get either of the antennas off my 615. They are listed as removable reverse SMA but they are so tight I am afraid of damaging it. This is my second 615 after not being able to get one of the antennas off the first. D-link said they should just unscrew but I cannot get either of them to budge. D-link support said the one I had first must have been manufactured wrong so I returned it to new egg and got a new one. Same issue. I need to have an external antenna on the unit.
View 11 Replies View RelatedWhat is is the 887's wifi antenna removable or not? we want to add expand cable to extend wifi signal.
View 13 Replies View RelatedI know there a lot of threads on antenna for the DIR-825 but my question is ....does any antenna RP SMA are compatible with this router ? url...
View 3 Replies View Related]Region : Philippines
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.14.2
ISP : globe telecomms inc.
i just bought an antenna for my new tl-mr3220 v2 router that is 9db. my current one is he 5db that was supplied together wit the unit. then when i installed the new antenna, instead of an increase in the range it lower than my old one. is there any specific antenna or type that you can use? if so what types of antennas?
Region : UnitedStates
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : Virgin Mobile with MC760 antenna
In remote areas, I use Virgin-Mobile's MC760 Broadband2Go antenna to provide Broadband to my netbook. This ISP service requires that you "sign in" with username and password to initialize the BB transmission. I would like to use my TL-MR3020 to host the Virgin-Mobile's Broadband2Go MC760 antenna to provide a wireless hotspot, instead of the hardwired direct-computer connection I have. I've gone thru the MR3020 quick setup with the MC760 but been unable to get it to connect. The 3020 is putting out the wireless signal...it's just not connected to my Virgin-Mobiles BB service...thus no www internet tie. how to use the MR3020 with Virgin-Mobile's MC760 (3G/4G) Broadband2Go antenna?
I just bought a DIR-815 and wanted to upgrade the antenna's. Unfortunately I can't figure out how to remove them. Typically you can unscrew the antenna's on similar products. But DIR-815's seem firmly attached.
View 6 Replies View RelatedI have a Dir 655 router how can I know if one of the antennas is working right?
View 5 Replies View RelatedHow to add an external antenna? I'd like to mount a DCS-930L in a location (inside a metal housing) that would need the antenna to be a few inches away. Any internal layout information?
View 3 Replies View RelatedHow can I attach an optional antenna to a Dir 615 router?
View 1 Replies View RelatedI have tested each antenna separately. With each antenna attached one at a time the left and right antenna is giving me -20 signal. The center is only giving me -65 signal. Is this a problem with the router or normal? I noticed that the center pin is pushed in more then the left and right. Don't know if that is the cause.
View 14 Replies View RelatedWhat is the 5GHz antenna orientation in the DAP-1522? If I want to get the best signal for streaming to a DSM-750 how should I orient the the DAP-1522? Horizontal? Vertical? and which edge towards the media player?
It's working but the access point only reports about 50% signal strength over 20 feet (and only 1 wall) so I would have expected better. I've tried turning the box a couple of different ways but didn't see any big difference in the reported signal strength.
Region : Brazil
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP :
I want to change the antennas on my wdr3600 to increase the range of the signal because my walls are too thick. I can not find TP link brand Dual Band Antennas, so I search ebay and found this:
[url]....
Any dual band RP-SMA antenna is compatible with the WDR3600? or do I need to search for something in particular?
Region : India
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.6
ISP :
We need to configure the AP in such a way, only 1 antenna to be used & not other two, to meet some mounting requirements/limitations. Will I be able to do this using any test/debug commands?
Essentially I want this AP to be operating in 1x1 spatial stream, & with no antenna diversity, so that I can connect only 1 antenna & be deterministic about AP using only connected Antenna RF port & not others
With out configuring anything, when I connect only 1 Antenna, I observed that signal is fluctuating on Client Application & causing the applications traffic stream disconnect.
Region : Netherlands
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 121225
ISP :
I bought this router to replace my WNDR3700v1 (by Netgear).Although on short distance the Netgear is outperformed, on the other site of the house the 2,4GHz signal is lost often (where the Netgear would still work). Both routers are located on the same location (not simultaneously) and settings are identical (channel, band, security, etc.).
I was wondering if I could get more performance out of the TP-Link by positioning the antennas in different angles. All antennas were positioned vertically and I also tried having the outer antennas under 30 degrees.
Anybody know of a extension cable for this product? D-Link 14dBi Outdoor Direct Antenna (ANT24-1400) I need at least 10-15 feet of extra length.
View 1 Replies View RelatedRegion : India
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Can i Use Grid Parabolic Antenna with TL-WDR4300?
Then which is suitebal
1. 5GHz 30dBi Outdoor Grid Parabolic Antenna TL-ANT5830B
2. 2.4GHz 24dBi Grid Parabolic Antenna TL-ANT2424B
because N750 is Dual Band Router [2.4GHz 300Mbps and 5GHz 450Mbps]. so, which one is best with both 2.4GHz and 5GHz.
My housemates have been having a trouble with network coverage in my house, the router is located in the basement of my house, perfect for me as my room is also down there (Ethernet). Unfortunately my housemate in the attic room's signal seems to be a problem. I'm wondering if it would be possible to remove one of my routers two antennas solder some copper wire to the spot it was removed, then have the wire go up to the 1st floor and re-solder the antenna up there (mount it on the wall or something). I'm confident with the practicalities of actually doing this, but I'm not that techie when it comes to electronics. I'm not sure whether it would need more power to boost it over such a distance.
View 3 Replies View RelatedHow do I remove the existing antenna from my N+ router...?
View 3 Replies View RelatedI have the following router (belkin f5d8235-4). I wanted to replace the 2 antenna's with high gain ones. if the antenna is removable and how do i remove it?
View 1 Replies View RelatedI buy my wifi from the rv park that I live in how do I hook up an antenna to get a stronger signal to my router. I would have wifi coming in then my network going out .
View 1 Replies View RelatedI'm looking for a router with an external antenna connection so I can attach an outside antenna to extend my wi-fi signal signal around my farm.Right now I have Hughes net internet service running to a Belkin 750 router, which is descent around the house, but has no connection for an external intenna.
View 3 Replies View RelatedI've just purchased an Genius ESR750H router which features two external and removable antennas. I know the range on this router is pretty decent but I'd like to find a set of antennas that would further increase the range for both the G and N wireless modes.
View 2 Replies View RelatedI have a Belkin Play N300 (part number = F7D4302) wireless router, and I want to connect my (soon-to-be-pole-mounted) 12DBI omnidirectional antenna to it, the goal is better wireless access in one area of a church camp. I have a couple of U.lf - RP-SMA pigtails on the way, because of course the router doesn't have an external antenna connection.
I opened up the router case, and below is a shot of the board. There's plenty of room inside the case. The router is dual-band (2.4 and 5ghz), and uses 2 internal antennae, apparently it senses the better one and uses it as needed.
My plan is to disconnect one antenna, and connect/solder my external antenna pigtail in its place. I'm a fair hand at soldering, but very little practice de-soldering...
1. Is disconnecting / replacing one antenna the way to go, and if so, which one? Or should I leave them both connected and piggyback my external onto one of them (soldering the leads on top of existing connections), or disconnect both antennae, or does it matter?
2. Which set of wires, white or black, are used for which band - and should I connect to? I assume I'd want to hook up to the 2.4ghz, correct?
The white wires come out from the tiny Broadcom chip, I think it's marked BCM43224KMLG (dang, that's some tiny print!). This page leads me to think that these are the 5ghz antenna leads, but I'd llike to be positive before I start cutting.
The black wires appear to feed from the larger Broadcom chip marked BCM4718A1KFBG. Again, this page leads me to think that this is the 2.4ghz antenna.
3. Assuming that the black wires are the ones I want, would it be ok to cut one really close to the board end, cut the U.fl connector off of my pigtail, prep the wire / shielding, and solder the wire / shielding on top of the existing solder connection?
My question is how can I use this existing wi-fi as input to a router to make a sub wi-fi for four computers and a wireless printer. Some of my computers may need to be wired into the router.
View 5 Replies View RelatedI just purchased a alfa wifi antenna. It has the cable terminal usb. but my router only has Ethernet and internet cable connection.
I have there PC( 1 desktop and to laptops.
Is it possible to add an external antenna to this WRT160Nv3 router? Some spots are just on the one bar signal level that comes and goes.
View 1 Replies View RelatedMy employer provides me a Cisco 881W. I don't use the wireless features: my computer is cabled via Ethernet. I cannot administer the device, so I cannot disable wireless. I want to remove the 3 antennae and replace them with a dummy load or something else that will not radiate much.
View 1 Replies View RelatedWe have the Cisco WRT54G wifi router in many offices in this building. This router has two antennas. These antenna are screw into the back of the router unit. The antenna is male and router side is female of the connector. what are these connectors (some type of RF connectors)? How can we get extension cables for these to move the antenna from one fix location to another point?
View 4 Replies View RelatedI have to replace our WRT54G router--it's currently connected to a power booster and and omni-directional antenna. Is there a router with an antenna connection compatible with the WRT54G--preferably a single antenna model?
View 4 Replies View RelatedAny diagram showing the antenna position or signal pattern from the EA2700? I know that Cisco recommends that the unit be placed "near the ceiling" but I'm looking for more specific information. Should the unit be mounted vertically or horizontally.
View 1 Replies View RelatedI have a Linksys WRT54G that I am providing for somebody, but their home is a bit larger and has a few weak signal spots. I would like to get upgraded antennas to replace the short 5-6" stock ones.
View 1 Replies View Relatedfind a 3x3 (450mbps) WiFi antenna for the 802.11n 5GHz band? I'm pretty much looking for something similar to this, which works at 2.4GHz:
[URL]
I've done a considerable amount of searching and have not been able to come up with anything. Individual 5GHz dipole antennas can be bought online, but these would be a sub-optimal solution for me, as I would like the antenna to have a solid base so it can sit on the desk/bookshelf.Edit: Found a Proxim antenna that claims to be dual-band, but it's pricey. Also claims to use reverse SMA connectors, so should work with desktop WiFi cards or mini PCIe cards with pigtails.[URL]
