D-Link DIR-615 :: Antenna Listed As Removable Reverse SMA
Apr 28, 2009
This may sound ignorant but I cannot get either of the antennas off my 615. They are listed as removable reverse SMA but they are so tight I am afraid of damaging it. This is my second 615 after not being able to get one of the antennas off the first. D-link said they should just unscrew but I cannot get either of them to budge. D-link support said the one I had first must have been manufactured wrong so I returned it to new egg and got a new one. Same issue. I need to have an external antenna on the unit.
View 11 Replies
ADVERTISEMENT
Aug 18, 2010
If the antenna for this router is removable? The model I have doesn't seem like it is and I am afraid that I might break it if I try. I would like to connect an external antenna I have.
View 4 Replies
View Related
Dec 13, 2010
What is is the 887's wifi antenna removable or not? we want to add expand cable to extend wifi signal.
View 13 Replies
View Related
May 18, 2011
I'm having some issues trying to reserv an IP from my D-link DIR-825 router.I have set up a static IP on my computer: 192.167.0.10. But if i view the clients on my network that ip doesn't show up!
View 2 Replies
View Related
Jul 27, 2012
I recently noticed my 'Number of Dynamic DHCP Clients' on Network Settings is always empty. Before, it always registered a list since there are several devices that are connected to our wireless network (laptops, mobile phones, desktops).
View 3 Replies
View Related
Apr 13, 2011
I just bought a DIR-815 and wanted to upgrade the antenna's. Unfortunately I can't figure out how to remove them. Typically you can unscrew the antenna's on similar products. But DIR-815's seem firmly attached.
View 6 Replies
View Related
May 7, 2011
I have a Dir 655 router how can I know if one of the antennas is working right?
View 5 Replies
View Related
Feb 12, 2013
How to add an external antenna? I'd like to mount a DCS-930L in a location (inside a metal housing) that would need the antenna to be a few inches away. Any internal layout information?
View 3 Replies
View Related
Nov 16, 2011
How can I attach an optional antenna to a Dir 615 router?
View 1 Replies
View Related
May 4, 2011
I know there a lot of threads on antenna for the DIR-825 but my question is ....does any antenna RP SMA are compatible with this router ? url...
View 3 Replies
View Related
Nov 12, 2012
I have tested each antenna separately. With each antenna attached one at a time the left and right antenna is giving me -20 signal. The center is only giving me -65 signal. Is this a problem with the router or normal? I noticed that the center pin is pushed in more then the left and right. Don't know if that is the cause.
View 14 Replies
View Related
Nov 22, 2008
What is the 5GHz antenna orientation in the DAP-1522? If I want to get the best signal for streaming to a DSM-750 how should I orient the the DAP-1522? Horizontal? Vertical? and which edge towards the media player?
It's working but the access point only reports about 50% signal strength over 20 feet (and only 1 wall) so I would have expected better. I've tried turning the box a couple of different ways but didn't see any big difference in the reported signal strength.
View 2 Replies
View Related
Dec 29, 2012
]Region : Philippines
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.14.2
ISP : globe telecomms inc.
i just bought an antenna for my new tl-mr3220 v2 router that is 9db. my current one is he 5db that was supplied together wit the unit. then when i installed the new antenna, instead of an increase in the range it lower than my old one. is there any specific antenna or type that you can use? if so what types of antennas?
View 2 Replies
View Related
Apr 4, 2013
Region : UnitedStates
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : Virgin Mobile with MC760 antenna
In remote areas, I use Virgin-Mobile's MC760 Broadband2Go antenna to provide Broadband to my netbook. This ISP service requires that you "sign in" with username and password to initialize the BB transmission. I would like to use my TL-MR3020 to host the Virgin-Mobile's Broadband2Go MC760 antenna to provide a wireless hotspot, instead of the hardwired direct-computer connection I have. I've gone thru the MR3020 quick setup with the MC760 but been unable to get it to connect. The 3020 is putting out the wireless signal...it's just not connected to my Virgin-Mobiles BB service...thus no www internet tie. how to use the MR3020 with Virgin-Mobile's MC760 (3G/4G) Broadband2Go antenna?
View 3 Replies
View Related
Feb 27, 2013
Region : Brazil
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP :
I want to change the antennas on my wdr3600 to increase the range of the signal because my walls are too thick. I can not find TP link brand Dual Band Antennas, so I search ebay and found this:
[url]....
Any dual band RP-SMA antenna is compatible with the WDR3600? or do I need to search for something in particular?
View 1 Replies
View Related
Mar 25, 2013
Region : India
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.6
ISP :
We need to configure the AP in such a way, only 1 antenna to be used & not other two, to meet some mounting requirements/limitations. Will I be able to do this using any test/debug commands?
Essentially I want this AP to be operating in 1x1 spatial stream, & with no antenna diversity, so that I can connect only 1 antenna & be deterministic about AP using only connected Antenna RF port & not others
With out configuring anything, when I connect only 1 Antenna, I observed that signal is fluctuating on Client Application & causing the applications traffic stream disconnect.
View 1 Replies
View Related
Jan 28, 2013
Region : Netherlands
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 121225
ISP :
I bought this router to replace my WNDR3700v1 (by Netgear).Although on short distance the Netgear is outperformed, on the other site of the house the 2,4GHz signal is lost often (where the Netgear would still work). Both routers are located on the same location (not simultaneously) and settings are identical (channel, band, security, etc.).
I was wondering if I could get more performance out of the TP-Link by positioning the antennas in different angles. All antennas were positioned vertically and I also tried having the outer antennas under 30 degrees.
View 2 Replies
View Related
Aug 19, 2011
Anybody know of a extension cable for this product? D-Link 14dBi Outdoor Direct Antenna (ANT24-1400) I need at least 10-15 feet of extra length.
View 1 Replies
View Related
Dec 29, 2012
Region : India
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Can i Use Grid Parabolic Antenna with TL-WDR4300?
Then which is suitebal
1. 5GHz 30dBi Outdoor Grid Parabolic Antenna TL-ANT5830B
2. 2.4GHz 24dBi Grid Parabolic Antenna TL-ANT2424B
because N750 is Dual Band Router [2.4GHz 300Mbps and 5GHz 450Mbps]. so, which one is best with both 2.4GHz and 5GHz.
View 1 Replies
View Related
Mar 18, 2012
On the network sharing screen there r no networks listed To connect to Internet. I already contacted the Internet provide and there r no problems on there end. Everything is pluged in
View 14 Replies
View Related
Sep 8, 2011
how do i check the listed ip's on my server?
View 1 Replies
View Related
Dec 16, 2011
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Turion(tm) 64 Mobile Technology ML-40, x86 Family 15 Model 36 Stepping 2
Processor Count: 1
RAM: 958 Mb
Graphics Card: ATI RADEON XPRESS 200M Series, 64 Mb
Hard Drives: C: Total - 69303 MB, Free - 39138 MB; D: Total - 6991 MB, Free - 3631 MB;
Motherboard: Gateway,
Antivirus: Trend Micro Titanium Internet Security, Updated: Yes, On-Demand Scanner: Enabled
My wireless stopped working. I had problems in the past, not sure how I got to work then. But the other day after handling the modem/router-combo, I guess it became unplugged. I plugged it back in and have not had wireless since. I turned off computer, restarted. My wireless network is not even listed. I can connect vie ethernet. No adapter is listed under Broadcom Wireless.
View 12 Replies
View Related
Jul 4, 2011
I recently bought a Medialink Wireless N router and configured it as per the instructions. I have a desktop computer connected to the router now and it works great with a wired internet connection. However when I try to connect to the wireless network with my laptop, the network does not appear in the available list of networks. The broadcsting SSID feature for the router has been enabled. I am not able to figure out if it is a problem with the wireless network or my laptop, because my laptop has been acting weird lately. Is there a way to test that the wireless adapter on my laptop is working fine. I am able to see other wireless networks on the list. How do I know for sure that my wireless network is set up right?
View 3 Replies
View Related
May 8, 2011
i am on pc i want same outlook on mac no delete on main xp pro home office pc. would like to received and send email from new mac book pro: fully synced between both?
View 1 Replies
View Related
Dec 29, 2011
I want to know the return path between my IP and a server. I know that trace route gets some information about the hops from my IP to a server (for example www.google.com) but this info is about the forward path. But I want to know what is the path from the server to my PC, what is the reverse path (return path)? What are the middle hops? In other word, I want to know where is the forward and reverse path when I ping a server? I can find the forward path using trace route, but what about the return path?
View 7 Replies
View Related
Mar 2, 2012
I recently had to reinstall Windows XP on my Panasonic Toughbook but when I did, I now don't have any way of getting a wireless internet connection. I don't see the wireless card in the hardware list and there's no wireless connection listed in the network connections. (This laptop came with Vista Business but I wanted XP since I'm more familiar with it.)
View 1 Replies
View Related
Mar 3, 2013
1. I recently purchased an Asus X53-sx1159v laptop (Windows 7 64 bit os - other detals at bottom ).
2. While it has a wifi network connection (which works fine), it doesn't seem to have any listing for ethernet (ie wired) connection. (even though it has the port for wired access.)
3. When i look under computer/device manager/networks, all i get is the wifi atheros 9485 network adaptor. There is no other listing. (see attched file for screen grabs)
4. Am i missing something obvious with all this? The Asus website has examples of this model with screen grab which includes an ethernet adaptor as well (see attached file)
Note that laptop is labelled as an X53 series but in the computer it get listed as a K53e
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, Intel64 Family 6 Model 42
[Code].....
View 7 Replies
View Related
Jan 31, 2011
I bought a 3548XL switch off ebay for real cheap. I am configuring it right now for home use, mainly to play with.
It has IOS 12.0 and doesn't support even some basic commands, like int ranges or even the do command in global config mode. And it doesn't seem to support VLANs either.I have looked through Cisco's site and couldn't find what I was looking for. I dont know if my switch supports the newest IOS, or which version IOS that it does support. The switch isn't listed in the IOS software advisor.
View 5 Replies
View Related
Feb 10, 2013
I have 2 data centers conencted via WAN and each has their own Internet conenction. One of the site's Internet is close to maximum bandwidth and we want to use the second site's Internet for future connections. The problem is the core switches in each site has a default rout to their local firewalls, so even if I can NAT on the firewall, the return traffic goes out whichever firewall is local and will fail.
So, my plan is to change the source IP address of the packets to be an address on the inside interface's LAN subnet. That way it is routed back to the proper firewall. I am able to do this with the following code, but this code only works with a static one to one NAT. I am limited in public IP addresses, so I want to NAT on a per port basis. Each time I try to change the any any to a specific port, it fails.
object network host-inside-int
host 10.1.52.172
object network host-outside-nat1
[Code].....
View 5 Replies
View Related
Jul 29, 2012
I am currently trying to apply a reverse NAT on asa 8.2 and not sure how to do this. I have done this on asdm 6.2 for asa 8.3 but the options are not simiar on 8.2. Is there a CLI equivelant?
I am trying to Achieve the object below for any traffic coming from outside interface to the inside interface with any source address to destination 10.X.X.58 then translate it so that it become 192.X.X.X to address 192.X.X.58. This is so that communications can traverse internal network as the server is not ona DMZ.
I have done this on 8.3 (shown below) but do not know if it is possible for 8.2, I have tried replicating the same command on 8.2 but commands are not recognised.
nat (outside,any) source static any 192.X.X.X destination static 10.X.X.X 192.X.X.58
Should I just upgrade to 8.3? never done it before so not sure of the consequences.
View 3 Replies
View Related
Dec 22, 2012
After upgrade to 9.0.1 from 8.4 I have problems with reverse dns resolving, like this:
named[2679]: DNS format error from 193.0.9.1#53 resolving 82.64/27.195.26.72.in-addr.arpa/PTR for client 127.0.0.1#37124: question section mismatch: got 90.64.195.26.in-addr.arpa/IN/PTR
Only solution I found is to disable inspect dns, which is not very good.
View 2 Replies
View Related
Jun 21, 2012
There is no wireless connection icon under network connections neither is there a device listed under network adapters in the device manager. My laptop used to connect to wi-fi but i think somehow the adapter was uninstalled or just plain broke... is there any easy way to find out if i can just reinstall it or if i need a usb adapter now?
View 2 Replies
View Related
Jun 19, 2012
I just replaced a hard drive on my computer, installed win7, hooked up the linksys according to the guide but it is not recognizing anything attached. My devices indicates an unknown ethernet controller. I have installed no drivers for anything, no drivers were listed as needed for wcg200.
The same linksys is hooked up to a second computer (which I am posting from) so I am assuming it works fine. Also I had the thing set up on the last harddrive with win7, the only difference was the harddrive was loaded up with the OS by the computer shop. I have never done this before and wanted to try it out. I swapped ethernet cables to make sure nothing changed with the cables, but no luck.
View 1 Replies
View Related
