How To Check Listed Ip On The Server
Sep 8, 2011how do i check the listed ip's on my server?
View 1 Replieshow do i check the listed ip's on my server?
View 1 RepliesI have to make a live chat (web based using ASP.NET) , like a customer service chat when the client click to start chat , the server will repsond with checking any operators that is available to chat with the client.the operator must be login to the site as active operator .how can i make the server to check the available operator ? is there a syntax or codes that can be applied in this condition?
View 2 Replies View RelatedMy computer (Win 7) is behind a proxy server at work. They have disabled the ping service. They told me it is disabled for security reasons, and everytime I try to ping a host, the connection times out.However I normally use ping as a good diagnostic to check if I have an internet connection or not. We experience frequent network problems, and I'd like to be able to at least narrow down the problem each time. Are there any other diagnostic tools/utilities I can use to test internet access? When I lose my internet connection, I'd like to be able to test if it is because my computer has lost its connecton to the proxy server, or if the proxy server has lost connection to the outside world.
View 6 Replies View RelatedCharter tech came today to solve my problem of my new modem not working, he fixed the Modem but i think he did something to the lan proxy settings after.I'm trying to set up my Belkin wireless G router but i do not have the orginal CD. What should my address be under the "Use a Proxy server for your LAN" checkbox and what is the port and should i check off the bypass proxy server for local address box?
View 4 Replies View RelatedOn the network sharing screen there r no networks listed To connect to Internet. I already contacted the Internet provide and there r no problems on there end. Everything is pluged in
View 14 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Turion(tm) 64 Mobile Technology ML-40, x86 Family 15 Model 36 Stepping 2
Processor Count: 1
RAM: 958 Mb
Graphics Card: ATI RADEON XPRESS 200M Series, 64 Mb
Hard Drives: C: Total - 69303 MB, Free - 39138 MB; D: Total - 6991 MB, Free - 3631 MB;
Motherboard: Gateway,
Antivirus: Trend Micro Titanium Internet Security, Updated: Yes, On-Demand Scanner: Enabled
My wireless stopped working. I had problems in the past, not sure how I got to work then. But the other day after handling the modem/router-combo, I guess it became unplugged. I plugged it back in and have not had wireless since. I turned off computer, restarted. My wireless network is not even listed. I can connect vie ethernet. No adapter is listed under Broadcom Wireless.
I recently bought a Medialink Wireless N router and configured it as per the instructions. I have a desktop computer connected to the router now and it works great with a wired internet connection. However when I try to connect to the wireless network with my laptop, the network does not appear in the available list of networks. The broadcsting SSID feature for the router has been enabled. I am not able to figure out if it is a problem with the wireless network or my laptop, because my laptop has been acting weird lately. Is there a way to test that the wireless adapter on my laptop is working fine. I am able to see other wireless networks on the list. How do I know for sure that my wireless network is set up right?
View 3 Replies View RelatedI recently had to reinstall Windows XP on my Panasonic Toughbook but when I did, I now don't have any way of getting a wireless internet connection. I don't see the wireless card in the hardware list and there's no wireless connection listed in the network connections. (This laptop came with Vista Business but I wanted XP since I'm more familiar with it.)
View 1 Replies View Related1. I recently purchased an Asus X53-sx1159v laptop (Windows 7 64 bit os - other detals at bottom ).
2. While it has a wifi network connection (which works fine), it doesn't seem to have any listing for ethernet (ie wired) connection. (even though it has the port for wired access.)
3. When i look under computer/device manager/networks, all i get is the wifi atheros 9485 network adaptor. There is no other listing. (see attched file for screen grabs)
4. Am i missing something obvious with all this? The Asus website has examples of this model with screen grab which includes an ethernet adaptor as well (see attached file)
Note that laptop is labelled as an X53 series but in the computer it get listed as a K53e
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, Intel64 Family 6 Model 42
[Code].....
This may sound ignorant but I cannot get either of the antennas off my 615. They are listed as removable reverse SMA but they are so tight I am afraid of damaging it. This is my second 615 after not being able to get one of the antennas off the first. D-link said they should just unscrew but I cannot get either of them to budge. D-link support said the one I had first must have been manufactured wrong so I returned it to new egg and got a new one. Same issue. I need to have an external antenna on the unit.
View 11 Replies View RelatedI bought a 3548XL switch off ebay for real cheap. I am configuring it right now for home use, mainly to play with.
It has IOS 12.0 and doesn't support even some basic commands, like int ranges or even the do command in global config mode. And it doesn't seem to support VLANs either.I have looked through Cisco's site and couldn't find what I was looking for. I dont know if my switch supports the newest IOS, or which version IOS that it does support. The switch isn't listed in the IOS software advisor.
I'm having some issues trying to reserv an IP from my D-link DIR-825 router.I have set up a static IP on my computer: 192.167.0.10. But if i view the clients on my network that ip doesn't show up!
View 2 Replies View RelatedThere is no wireless connection icon under network connections neither is there a device listed under network adapters in the device manager. My laptop used to connect to wi-fi but i think somehow the adapter was uninstalled or just plain broke... is there any easy way to find out if i can just reinstall it or if i need a usb adapter now?
View 2 Replies View RelatedI just replaced a hard drive on my computer, installed win7, hooked up the linksys according to the guide but it is not recognizing anything attached. My devices indicates an unknown ethernet controller. I have installed no drivers for anything, no drivers were listed as needed for wcg200.
The same linksys is hooked up to a second computer (which I am posting from) so I am assuming it works fine. Also I had the thing set up on the last harddrive with win7, the only difference was the harddrive was loaded up with the OS by the computer shop. I have never done this before and wanted to try it out. I swapped ethernet cables to make sure nothing changed with the cables, but no luck.
I have the latest AirMagnet Planner and don’t see the Cisco 3502i APs listed. Wondering AirMagnet what antenna should I use?
View 5 Replies View RelatedI know its probably got something to do with EIGRP no auto-summary, I was wondering if I could get some input as to why a route would change from being variably subnetted, which is usually the case until no auto-summary is deployed. Or am I totally lost? I attached a screen shot for a closer observation.
View 1 Replies View RelatedI am attempting to add my HP Officejet Pro 8500 wireless printer to my HP elite book. The printer is showing up in control panel as being my default printer. It is showing up as being offline, even though the drop down menu does not show it as being offline. No printers are listed in the device manager.
View 3 Replies View RelatedI recently noticed my 'Number of Dynamic DHCP Clients' on Network Settings is always empty. Before, it always registered a list since there are several devices that are connected to our wireless network (laptops, mobile phones, desktops).
View 3 Replies View RelatedI recently had an issue with my laptop that required a complete reinstall of windows. As if this wasn't bad enough, I lost the password that I had for my router. Thinking it was no big deal I just went ahead and reset the router back to factory settings assuming I would be able to set up a network and encrypt it as I had before. Just testing the functionality, I was able to access my router while it was not encrypted and with the DSL modem plugged in, I also had internet access. I did this both wireless and with Ethernet cable.
Happy to see this, I decided it would be a good idea to re-encrypt my router to prevent any outside access. So as I had done before I went to the setting page where I set up a network with a web key. The only thing I entered at all was the paraphrase for the key then saved the setting to test it out. I refreshed the available wireless networks and mine was there and was now listed as secure. I then proceeded to click on the network, entered the key, and then waited for it to connect. The problem is, it never would connect. It continuously tries to connect, and says it is trying to "acquire the network address" but never does. Since then I have been on the hunt trying many different suggestions I have seen online, but none of the situations were quite like this one.
I recently have been reading into QOS and have been fiddling with it on my Linksys WRT54G router. But there are a few things that seem limiting (at least on this version) so I have some questions.I live in a house with three other roommates all sharing the same internet connection. We don't have a bandwidth limit, so I don't care how much they're downloading. When I want to watch Netflix when they're all on the internet however, either my movies will come up in low quality, or will be interrupted.Under the Device Priority I put in my MAC address and set my priority to high. My first question is, what is the priority of a device that is not listed at all? There's only room for two devices so I can't put all three of my roommates in. I would assume their priority would automatically be the lowest.
I wanted to set certain common ports to be at a high priority. So far I just have port 53 for DNS entered with the highest priority, while my computer is set to high. Would this mean any computer making a DNS request would have a higher priority than my computer making a non-DNS query? I would like DNS to be a higher priority than myself streaming video.Finally, are there are ports that streaming video commonly use? I know there are ports for Netflix but I was also thinking of other Flash/HTML5 videos I might come across. Or do they tend to just use port 80?
As I write this my iPad is connected to my Linksys router. However, my iPad is nor listed as a device in the list of all connected devices. All my other devices are listed just fine. Why I can't find my iPad?
View 1 Replies View RelatedI've noticed that my E4200v2 Smart-Wifi cloud doesn't show all the devices that are connected to my router.To test, last night we turned on EVERYTHING....4 iPod Touches, 2 Xbox's, 1 Blu-ray player connected to Netflix, 1 Directly receiver, 4 laptops,1 desktop,1 iPhone, and made sure all of them were connected to the Wi-fi and actually streaming / downloading/playing something the Smart WiFi only recognized about half of them as being connected. I rebooted the router and it picked up a few more but never accounted for all the devices connected.
If you can't account for all the devices connected to your network, setting-up up reliable Parental Controls is almost impossible.Very disappointed and about ready to start looking for another brand of router. Sad, as I've been with Cisco/Linksys for over a decade and been very satisfied in the past.
Iam using dell inspiron n4010.....wireless card not listed in my device manager....cant find the driver at dell web sites.....Driver listed is not compatible with ma laptop...
View 1 Replies View RelatedWe have an RVS-4000 router that we use as an Internet gateway on our school network. I am trying to set up an Internet Access Policy to block some specific websites by URL using a domain name. I set up the policy, and added a PC to the list using the mac address, and the blocking did not work. I went back to the list and added the IP address of the same PC, the policy still did not work to block the domain. I rebooted the router, cleared the Internet Temporary files and history on the PC, and the policy still does not work. It acts like it is going to block access to the website because it takes a long time, but it will eventually connect.
View 7 Replies View RelatedDoes GLC-GE-100FX is supported on the WS-C2960S-24TD-L. I don't see this switch listed under the compatibiilty matrix.URL,But the datasheet for the 2960S says this:"The Cisco Catalyst 2960-S with SFP+ does not support the GLC-FE-100BX, GLC-FE-100FX, or GLC-FE-100LX."But it provides no reference for the GLC-GE-100FX,The easy answer is, no the 2960S-24TD doesn't support it.
View 1 Replies View RelatedI bought an rv120w. Now i want to trunk 2 lan ports to an smart switch to get 200MB out of that link.
The trunk mode in there in the manual that came in the cd with the unit i bought but is not in the web console.
I have updated the IOS to 1.0.3.10 to see if th trunk mode was there but is not.
My question is,
1 is that trunking feature there in the ios?
2- If not, why is listed in hte manual that came with the unit?
3- if it is in the ios, is there a was to by pass the web console and configure this?
4- can i do i maybe backing up the config then, editing the file and restoring it?
Screenshot below is from the manual in hte cd that came with the router
I am using a EA4500 and use Linksys Smart Wi-Fi to manage the device. In the household we have multiple Apple i devices. Somehow the Linksys Smart Wi-Fi combined two separte i devices (iPhone 5 and a 4th generation iTouch) to one user.The devices actually have different names, but the Smart Wi-Fi is combining them into one device. So I can't use Parental Controls on one of the devices.
View 8 Replies View RelatedI have a Dell Optiplex running XP wired to a Netgear router. My laptop is a Dell Inspiron 1501 running Windows 7. When I got the new router everything programed easily and I could retrieve files from my desktop and print remotely. Sometimes I would have to "refresh" before the laptop would detect the desktop but now it will not detect the desktop or the printer. I suspect that a Microsoft Update did this but just guessing. I went back and deleted the updates that downloaded around the time that this stopped working. I have tried every thing that I can think of to get it back working but can not get it fixed.
View 2 Replies View RelatedSimply one step away to check your IP address: type into your search box in your browser the following address
[url]....
I have a question for all those here who have experience with both Cisco ASAs and CheckPoint.Which do you prefer Cisco ASA or CheckPoint?
View 9 Replies View RelatedSome1 browse my PC via LogMeIn Hamachi, so i need 2 know who did that , how 2 see the log list?
View 1 Replies View RelatedHow do I check IP address of others, when in chatting or playing online game, I could only know that he is Mr. X from YZA country which appears on Screen, But I also know he is using with wrong name and wrong Country name.I would to check his IP as well as his Place?
View 1 Replies View RelatedI want to check the transfer speed between my PC and another IP.The IP belongs to a DVR here is the general schematic of the sistem:Digital Video Recorder - Dynacolor - DynaGuard H.264 DVR (nDG80 - nDG600 - DG200) & DynaHawk Speed Dome & IP CamerFirst when I've worked with this system everything worked well but now after three weeks I have to open 5 ore more internet explorer windows to see live image and I can't see the recordings.I need to know the speed transfer because I want to know if someone had decreased my transfer speed between my PC and the router or DVR.
View 3 Replies View Related