No Networks Listed To Connect?
Mar 18, 2012On the network sharing screen there r no networks listed To connect to Internet. I already contacted the Internet provide and there r no problems on there end. Everything is pluged in
View 14 Replies
ADVERTISEMENT
Wireless Network Not Listed In Available Networks
Jul 4, 2011I recently bought a Medialink Wireless N router and configured it as per the instructions. I have a desktop computer connected to the router now and it works great with a wired internet connection. However when I try to connect to the wireless network with my laptop, the network does not appear in the available list of networks. The broadcsting SSID feature for the router has been enabled. I am not able to figure out if it is a problem with the wireless network or my laptop, because my laptop has been acting weird lately. Is there a way to test that the wireless adapter on my laptop is working fine. I am able to see other wireless networks on the list. How do I know for sure that my wireless network is set up right?
View 3 Replies View RelatedLinksys Wireless Router :: WRT54G Listed As Secure But Would Never Connect
Jul 16, 2011I recently had an issue with my laptop that required a complete reinstall of windows. As if this wasn't bad enough, I lost the password that I had for my router. Thinking it was no big deal I just went ahead and reset the router back to factory settings assuming I would be able to set up a network and encrypt it as I had before. Just testing the functionality, I was able to access my router while it was not encrypted and with the DSL modem plugged in, I also had internet access. I did this both wireless and with Ethernet cable.
Happy to see this, I decided it would be a good idea to re-encrypt my router to prevent any outside access. So as I had done before I went to the setting page where I set up a network with a web key. The only thing I entered at all was the paraphrase for the key then saved the setting to test it out. I refreshed the available wireless networks and mine was there and was now listed as secure. I then proceeded to click on the network, entered the key, and then waited for it to connect. The problem is, it never would connect. It continuously tries to connect, and says it is trying to "acquire the network address" but never does. Since then I have been on the hunt trying many different suggestions I have seen online, but none of the situations were quite like this one.
How To Check Listed Ip On The Server
Sep 8, 2011how do i check the listed ip's on my server?
View 1 Replies View RelatedNo Adapters Listed Under Broadcom Wireless?
Dec 16, 2011Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Turion(tm) 64 Mobile Technology ML-40, x86 Family 15 Model 36 Stepping 2
Processor Count: 1
RAM: 958 Mb
Graphics Card: ATI RADEON XPRESS 200M Series, 64 Mb
Hard Drives: C: Total - 69303 MB, Free - 39138 MB; D: Total - 6991 MB, Free - 3631 MB;
Motherboard: Gateway,
Antivirus: Trend Micro Titanium Internet Security, Updated: Yes, On-Demand Scanner: Enabled
My wireless stopped working. I had problems in the past, not sure how I got to work then. But the other day after handling the modem/router-combo, I guess it became unplugged. I plugged it back in and have not had wireless since. I turned off computer, restarted. My wireless network is not even listed. I can connect vie ethernet. No adapter is listed under Broadcom Wireless.
No Wireless Connection Listed In Network Connections
Mar 2, 2012I recently had to reinstall Windows XP on my Panasonic Toughbook but when I did, I now don't have any way of getting a wireless internet connection. I don't see the wireless card in the hardware list and there's no wireless connection listed in the network connections. (This laptop came with Vista Business but I wanted XP since I'm more familiar with it.)
View 1 Replies View RelatedASUS X53 - No Ethernet Listed Under Device Manager?
Mar 3, 20131. I recently purchased an Asus X53-sx1159v laptop (Windows 7 64 bit os - other detals at bottom ).
2. While it has a wifi network connection (which works fine), it doesn't seem to have any listing for ethernet (ie wired) connection. (even though it has the port for wired access.)
3. When i look under computer/device manager/networks, all i get is the wifi atheros 9485 network adaptor. There is no other listing. (see attched file for screen grabs)
4. Am i missing something obvious with all this? The Asus website has examples of this model with screen grab which includes an ethernet adaptor as well (see attached file)
Note that laptop is labelled as an X53 series but in the computer it get listed as a K53e
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, Intel64 Family 6 Model 42
[Code].....
D-Link DIR-615 :: Antenna Listed As Removable Reverse SMA
Apr 28, 2009This may sound ignorant but I cannot get either of the antennas off my 615. They are listed as removable reverse SMA but they are so tight I am afraid of damaging it. This is my second 615 after not being able to get one of the antennas off the first. D-link said they should just unscrew but I cannot get either of them to budge. D-link support said the one I had first must have been manufactured wrong so I returned it to new egg and got a new one. Same issue. I need to have an external antenna on the unit.
View 11 Replies View Related3548XL Switch Isn't Listed In IOS Software Adviser
Jan 31, 2011I bought a 3548XL switch off ebay for real cheap. I am configuring it right now for home use, mainly to play with.
It has IOS 12.0 and doesn't support even some basic commands, like int ranges or even the do command in global config mode. And it doesn't seem to support VLANs either.I have looked through Cisco's site and couldn't find what I was looking for. I dont know if my switch supports the newest IOS, or which version IOS that it does support. The switch isn't listed in the IOS software advisor.
DIR-825 IP Isn't Listed On D-Link Routers Active Clients
May 18, 2011I'm having some issues trying to reserv an IP from my D-link DIR-825 router.I have set up a static IP on my computer: 192.167.0.10. But if i view the clients on my network that ip doesn't show up!
View 2 Replies View RelatedWon't Connect To Certain Networks?
Sep 10, 2012This has me baffled: since the weekend I've been unable to connect to certain networks. Previously I could connect to any available network as normal, but all of a sudden I can't get onto certain network connections despite the fact they are available and at full signal strength. Some connections are fine, others are not.Something odd happens when I unsuccessfully try to connect: a window pops up but in the blink of an eye disappears again before I have time to register whether it's an error message or what.I've checked for Window updates and am fully updated, I've run my virus scan (Microsoft Security Essentials), and I've performed Windows Network Diagnosis to no avail.otel overseas and am now feeling the problem as I can't get onto the hotel's free wifi and am having to use my iPhone as a personal hotspot which is costing me a bomb
View 4 Replies View RelatedCan't Connect To LAN Networks
Sep 2, 2012Recently, I upgraded my PC into basically a completely new machine. Because the harddrive that I planned on using was IDE, and my IDE-Sata adapters weren't being recognized on BIO, I used a fresh sata harddrive and a copy of Windows XP Professional.
It booted fine, all parts recognized, only now I cant connect to any LAN networks. I only get the option for VGN, Broadband and Dial-up networking. Using a laptop at the moment
I've tried two different usb adapters, and connecting the LAN cable directly into the PC. The cable works on another desktop in the house, but my PC wouldnt let me make the LAN network.
How To Connect Two Different Networks
May 15, 2011I have two router as well as two switch. 1st router is Dlink's router, I used this router for sharing files and folders and also connect to NET. And 2nd router used for Windows Media Encoder to upload my audio data to other computer.My first router is connected with a 16 port DLink switch, and also 2nd router is connect with another 8 Port Dlink router. Now, 1 computer has two LAN card and it connect with both router through switch. But both is not working at a time, but if i disable one LAN another is worked and vice versa.
View 2 Replies View RelatedNew PC Can't Connect Any Networks?
Jul 4, 2012my pc just arrived this morning.. Booted it up, installed windows. All good. On the desktop now, and can't connect to my home network.. In fact I can't connect to any networks.. Windows tells me there are none available, but i'm using my laptop right next to my pc and there should be at least 5 connections including mine..
I DO HAVE a wireless card in there... but is there something you need to do to like activate it / turn it on? I can see the card listed in device manager.. it says it is working properly. Just can't connect to anything!
All i wanted to do was do some browsing on my new pc but looks like I will have to wait.
How To Connect 2 Networks
Jan 3, 2012I purchased a network storage device and would like every one i the house to be able to access it.I have attached a small diagram on how everything is connected.The modem given to me by my ISP has only 2 lan ports i can use(lan1 and Lan2)This modem is configure with the IP range 192.168.2.XXXOn this i have connected a netgear router and have configured it with the internal network IP range 192.168.1.XXXOriginal i had ALL PC's and devices connected to this router and everythign worked fine, but when using download software i.e. P2P the speeds would cause the router to crash and i had to go and power restart it to work. Becuase of this i connected MY PC directly to my ISP's modem so i dont keep crashing the router.
This all works fine, but i recently purchased a network storage drive that i would like every one to have access in the house.Becuase the Storage drive and my PC are on the IP range 192.168.2.xxx and everything connected to the router is on the IP range 192.168.1.xxx how can i give everyone access to the storage drive ??I know if i reconnect my PC and drive back on the netgear router it will work but i cant do that becuase of the location and becuase of the original issue of when downloading on my PC it would block the router.
Connect Two Networks Via VPN
Feb 14, 2011I want to connect two networks together via the internet and VPN. I currently have two Windows 2k8 Servers housed at both locations. I've tried to do as much as I could myself but clients on both sides cannot access each other. I set-up the Remote Router function on both Servers and connected them but I still cannot ping or access any of the remote resources on that network.
View 1 Replies View RelatedXP Won't Connect To N Networks
Nov 25, 2011I have 3 computers running XP, one running Windows 7 and 3 smart phones all connecting to a Netgear JWNR2000v1 Wireless- N 300 Router. All of them connected fine until about a month ago the XP machines all started having problems, until finally none of them would connect or could even detect the router at all. The smart phones and Windows 7 computer have never had a single problem connecting. My daughter has tried to use one of the XP machines at some coffee shops with no success, I assume they are "N" networks. I pulled out an old "G" router and they can all connect to that one without a problem. The XP machines are all different, one Compaq, one Dell, and one Toshiba. None of them have any detectable viruses, using Eset and Windows Security Essentials.
View 1 Replies View RelatedWireless Network Adapter Not Listed Under Device Manager?
Jun 21, 2012There is no wireless connection icon under network connections neither is there a device listed under network adapters in the device manager. My laptop used to connect to wi-fi but i think somehow the adapter was uninstalled or just plain broke... is there any easy way to find out if i can just reinstall it or if i need a usb adapter now?
View 2 Replies View RelatedLinksys Cable / DSL :: No Drivers Were Listed As Needed For Wcg200
Jun 19, 2012I just replaced a hard drive on my computer, installed win7, hooked up the linksys according to the guide but it is not recognizing anything attached. My devices indicates an unknown ethernet controller. I have installed no drivers for anything, no drivers were listed as needed for wcg200.
The same linksys is hooked up to a second computer (which I am posting from) so I am assuming it works fine. Also I had the thing set up on the last harddrive with win7, the only difference was the harddrive was loaded up with the OS by the computer shop. I have never done this before and wanted to try it out. I swapped ethernet cables to make sure nothing changed with the cables, but no luck.
Cisco :: AirMagnet Planner And Don’t See 3502i APs Listed?
May 21, 2011I have the latest AirMagnet Planner and don’t see the Cisco 3502i APs listed. Wondering AirMagnet what antenna should I use?
View 5 Replies View RelatedWireless :: Cannot Connect To All Available Networks
Nov 3, 2011i cannot connect to the available network even the homegroup.i have do troubleshoot but it cannot fix.and tell that i have problem with my adapter network..
View 1 Replies View RelatedHow To Connect To 2 Networks On Windows 7
Oct 31, 2011I use multiple computers in my house, I was just wondering, how would I go about connecting to 2 different networks on Windows 7 simultaneously?I have a router/modem downstairs which is connected to the internet & all of our computers, and I also have a modem/router in my bedroom that isn't connected to the internet, but I'd like to use it to share files and other things throughout my house.I've quite easily managed to connect to both networks at the same time, but as soon I connect to the wired network (the one without internet connection) I lose connection to the internet, even though I'm still connected to the wireless network which is connected to the internet.I've read a few different articles and posts about this same issue, but I can't find how to be connected to both & still have a connection.
View 1 Replies View RelatedCan't Connect To Wireless Networks Other Than WEP
May 7, 2012I have a RTL8187 wireless adapter. First of all, it did not come with windows 7 driver so it was a pain finding one. I found the latest ones though, but it seems it doesnt work (no networks will show). I have to choose the pretty outdated drivers, and it cant connect to WPA, WPA2, and hell, even open networks.
View 6 Replies View RelatedCisco :: Routing Table - Items Listed Variably Subnetted
Jul 7, 2012I know its probably got something to do with EIGRP no auto-summary, I was wondering if I could get some input as to why a route would change from being variably subnetted, which is usually the case until no auto-summary is deployed. Or am I totally lost? I attached a screen shot for a closer observation.
View 1 Replies View RelatedHP Officejet Pro 8500 Wireless Printer Not Listed In Device Manager
Jan 24, 2012I am attempting to add my HP Officejet Pro 8500 wireless printer to my HP elite book. The printer is showing up in control panel as being my default printer. It is showing up as being offline, even though the drop down menu does not show it as being offline. No printers are listed in the device manager.
View 3 Replies View RelatedD-Link DIR-600 :: No Devices Listed On Number Of Dynamic DHCP Clients
Jul 27, 2012I recently noticed my 'Number of Dynamic DHCP Clients' on Network Settings is always empty. Before, it always registered a list since there are several devices that are connected to our wireless network (laptops, mobile phones, desktops).
View 3 Replies View RelatedLinksys Wireless Router :: WRT54G What Is Priority Of A Device That Is Not Listed At All
Dec 8, 2011I recently have been reading into QOS and have been fiddling with it on my Linksys WRT54G router. But there are a few things that seem limiting (at least on this version) so I have some questions.I live in a house with three other roommates all sharing the same internet connection. We don't have a bandwidth limit, so I don't care how much they're downloading. When I want to watch Netflix when they're all on the internet however, either my movies will come up in low quality, or will be interrupted.Under the Device Priority I put in my MAC address and set my priority to high. My first question is, what is the priority of a device that is not listed at all? There's only room for two devices so I can't put all three of my roommates in. I would assume their priority would automatically be the lowest.
I wanted to set certain common ports to be at a high priority. So far I just have port 53 for DNS entered with the highest priority, while my computer is set to high. Would this mean any computer making a DNS request would have a higher priority than my computer making a non-DNS query? I would like DNS to be a higher priority than myself streaming video.Finally, are there are ports that streaming video commonly use? I know there are ports for Netflix but I was also thinking of other Flash/HTML5 videos I might come across. Or do they tend to just use port 80?
Linksys Wireless Router :: EA6500 - IPad Is Not Listed In The Devices?
May 14, 2013As I write this my iPad is connected to my Linksys router. However, my iPad is nor listed as a device in the list of all connected devices. All my other devices are listed just fine. Why I can't find my iPad?
View 1 Replies View RelatedRouters / Switches :: How To Connect Two LAN Networks
Apr 20, 2011i was trying connecting two LAN network on different location.
View 2 Replies View RelatedEmachine Netbook Won't Connect To Some Networks
Jun 2, 2011i have Verizon network at home and office; at home i connect fine; at work it is connected but randomly goes from low to excellent but cant bring up the internet; all other laptops connect just fine except this one..
View 5 Replies View RelatedCannot Connect To Certain Wireless And Hardwired Networks
Jul 25, 2012have a dell inspiron 1545 with windows vista. Sometimes at coffee shops I cannot connect to the internet. It says that I have local access only. This also has happened when I use my hardwire internet connection. Then at times it does work on the same network. It is not a network problem as I can connect with my iphone or other devices.
View 14 Replies View RelatedLaptop Can See Available Networks / Unable To Connect To Any Of Them
Apr 15, 2012My laptop can see available networks, but is unable to connect to any of them.I have run Microsoft Security Essentials and the scan comes back fine, ran CC Cleaner as well as Malware Bytes and those scans both come back fine as well.I have also re-seated my wifi card, as well as attempted a TCP/IP stack repair option.However none of these fixed my issue. What could be preventing my laptop from connecting to a network? I have also tried to boot into Safe Mode w/ Networking, and the pc is unable to connect there either.I have also disabled all security on my router, it is just an open network no security, broadcasting the SSID.
View 14 Replies View Related2 Nics On Same Subnet Cannot Connect To Different Networks
Mar 22, 2013I have 2 nics in my win7 system, NIC 1 connect to leased line and NIC2 is connected to organization LAN for internet. Both the ip add are in same subnet. when both the cables are plugged in to nics, leased line link connected to nic1 goes down. It wouldn't come up untill the cable from nic 2 is plugged out.Basically i wish to be connected to both the networks simultaneously.
View 1 Replies View Related