I replaced a WRT54G2 V1 with a E1550 earlier this week. This router connects a sub-net of our office to the main network of our office. When the WRT54 was in place everything worked without a hitch, but the E1550 keeps dropping us from a server we have on the main network. The WRT54 is back in play until I can figure this out.
View 1 RepliesI have a Linksys E1550 Wireless Router that is fast as can be on the wired connection, getting 30mbs from the cable modem connection. If I switch to using wireless on the same PC, the max connection speed I'll get is 2mbs. I've changed all sorts of settings trying to get this working right, and it still stays at 2mbs.As an additional note, this router was previously working fine at 30mbs on wireless as well, then out of nowhere this weekend, it started running at 2mbs. I went and purchased another of the same model and it is doing the same thing as well.
What is the secret to having this run at it's correct speed, not this slow 2mbs that it is now? I have configured this the same as every other Linksys router I've had in the past, and it is running horribly slow..I'm on the newest firmware as well, have already verified that. The old router was updated to newest firmware as testing to resolve this, and the new router came with it installed already.
I've read the various threads on here and tried all the fixes suggested and I still cannot get my PS3 to "see" the USB drive I've attached to my router.I can see it and access the files from a connected computer, but not the PS3.I've tried creating a share with one directory and sharing the entire partition with no luck. I've enabled all the FTP options with no luck. UPNP is enabled. I've tried setting up the guest account with no luck.I've tried restarting, unplugging with no luck either. I also went into the USB drive and reformatted and started all over again.My PS3 can easily see the other computers on the network, but I would like to use the USB port on the router to not have to have a computer running to stream music.Is there another menu location on the PS3 I should be using to locate the USB? Currently I just look under music or video and the other computers are there. Just not the USB.
View 1 Replies View RelatedI have a Linksys E1550. I would like to extend its range by using an old Netgear N600 I have laying around. I know the Netgear can be used as a repeater. I do not know what settings I need to change in my Linksys router to be able to use a repeater.
View 5 Replies View Relatedi have a linksys e1550 router and ive been trying to look up a way to make it connect with my nintendo ds lite
View 3 Replies View RelatedI have a Cisco linksys router e1550. My wireless network is working fine, but my wired (PC) is not working?
Removing the router and having the modem connected to my PC works but when I put on my router my wired connection only works for a few seconds to none
So I think the router may be causing it, could it be the settings? Even though there at default.
I have a E1550 with a corrupt config that is acting very wonky lately (shows wrong info in some of the settings and doesn't always save changes). Since it may be the config that is at issue, I don't want to do a backup/resote, rather I plan to do a full factory reset and manully type everything back in.What would be nice is, creating a text based, human readable printout of the config for reference so that I don't have to manually type it all twice (once to save it, once for reentry). PS3 ports, MAC filters, etc. have several entries, and they way the pages are designed it doesn't allow for easy, whole entry, cut and paste.
View 5 Replies View Relatedhow to access an E1550 wireless router's settings and configure it to connect to my wireless DSL router? The DSL phone line is not located anywhere near my TV/DVR/Roku and I'd like to connect them wirelessly to our DSL router. The E1550 is next to the TV/DVR/Roku.
View 6 Replies View RelatedI reset my E1550 wireless router with the red button under it. Ever since then I can not connect to internet.
View 3 Replies View RelatedMy objective is to use the USB port on the E1550 to share an external hard drive for my family's shared media files.I have moved into a rental home with little cat5 wiring. Internet service is Uverse.Given the wiring situation, I bought a netgear universal dual band range extender which connects wirelessly to the uverse router in another room. My home office equipment (computer, printer) are wired into the netgear. All of that works fine. The netgear is 192.168.1.66. The computer is 192.168.1.128. So, I wanted to add the E1550 into my network. I can see it as an attached device on the Netgear's admin page, but cisco connect and a direct ip http://192.168.1.68 does not resolve. I have the e1550 connected via a lan port on the netgear extender (there is no other option). I have gone from that lan port to the internet port on the e1550. I have done so with a staight Cat5 cable and with what I believe should be a cross-over. In both situations, I see the router via the netgear admin page but can not connect to it. I'd prefer not the hang my usb drive off of my computer because it if gets turned off or reboots due to a MS Windows auto update, it leaves the rest of the house with no shared media during that process.
View 1 Replies View RelatedI tried to connect to my E1550 router admin page at 192.168.1.1 and I'm not seeing the login page. I'm getting an error. I've always been able to get to the admin page. I'm not sure what changed. I tried changing the IP# and subnet mask of my laptop and I still can't connect. I tried resetting the router to factory defaults.
View 1 Replies View RelatedI purchased an E2500 router today and it worked perfectly for about 4 hours. Now it drops my internet connection constantly. I can connect and load maybe 2 pages before that little yellow triangle of doom appears. Then after 2 or 3 minutes I am good and can reconnect. This cycle just keeps happening.
View 1 Replies View RelatedE1550 not connecting to any Google related sites via Kindle Fire web application (Silk) in Kindle Fire. Other wireless devices working fine from E1550 and all apps in Fire connecting fine.
View 5 Replies View RelatedI have an E1550 less than 1 year old. Lately, I have been losing internet on the AT&T modem. I called AT&T but as part of their diagnostics, I have to plug the modem directly into the PC. I have loaded the latest firmware to the E1550.Lose Internet but wireless connectivity to router exists.Internet light on modem is out (modem is connected to router)Unplug modem and leave off plug in, internet light is still out.Unplug router, plug router back in - no internet connection but do have wireless connectivity to router.Take cable from modem to router and plug directly into PC internet light comes on in modem and I have internet from PC.Take cable from PC and plug back into router .I have internet via wireless.What I can't figure out is what could be happening in router that would impact modem internet connection. I have replicated this at least 3 times. Yes, the modem is a bit old, but since plugging it directly into the PC works, I'm thinking it has to be the router and I cannot figure out why unless there's some sort of electrical thing going on in the router.
View 4 Replies View RelatedI had previously posted about problems with the E1550 not being able to recognize NTFS formated hard drives. After multiple retries and reformats I was finally able to get it to work and was able to backup my system files to that NTFS hard drive.
Now, little more than a week later I setup to run my backup to run again and once again the E1550 is not accessing the hard drive. The same one it had previously acknowledged and allowed me to save to.
The E1550 sees that there is a hard drive out there but all it says is "Detecting..." this does not change.
I need this to be fixed and stay fixed. If it is going to do this every time I turn on the drive to do weekly backups, then I need to get a different wireless router.
I installed a Linksys E1550 wireless router at home and I moved an external storage drive from the old computer (soon to be gone) to the router via the USB port in the router.
I can see the drive and files on the router on both the old computer and the new laptop, but I can't do anything with them. When I look at permissions for any given file it says: "Everyone" has read and execute only. "root" has Full Control, but I can't gain access to the "root" userid. I have gone through the router setup and folder/file properties using the "admin" userid and the router acknowledges that it is there, but it won't allow me to add permissions for the "admin" with "Full Control" to any of the items.
It won't even allow me to add new files, even though I have setup sharing for the entire partition.
So, what I essentially want to do is share the device connected to the back of my router so that I can remotely access it over the internet. Much like the manual says you can do.
But I'm having trouble. I've currently got the port set at 38, but the website never loads.
I may be replacing my e1550 soon and am looking at both the N750 and N900 class devices. While the EA3500/4500 seem to be a really good deal with a lot of bang for buck, I do have one concern...
As I have zero intention of ever using Cisco Cloud Connect, I would need to stick with the Classic firmware. While Cisco did quickly push out a solution to get the routers back to Classic after the initial Cloud Connect deployment fiasco, I cannot seem to find any commitment from Cisco to continue to support the classic interface (other than "“Cisco will continue to support both local and cloud management options for our customers.”). Even more disconcerting is that the current evidence seems to indicate that they are not. [code]
So, while I do understand that many of the updates have been Cloud Connect specific, some of these changes are in fact global/driver updates. As an example, according to the release notes, on June 25, 2012 the EA3500 CCC firmware v.1.1.38 (Build 138143) updated the WiFi driver, apparently the Classic never received this update.
Currently running Windows 7, with internet explorer. I have most recent firmware installed on my e2500. The unit drops wireless connectivity on an intermittent basis. Sometimes after 5 minutes and sometimes after 20 or 30 minutes.
View 9 Replies View RelatedI'm running Windows 7 Home Premium (64 bit) connected to a Linksys WRT610N Router. I have attached a 320GB USB 5400 rpm hard drive to the router as NAS storage.The router is running 2.00.01 build 15 firmware. I get frequent drop-outs when transferring large files. Tonight I've been trying to transfer a 4.36GB file to the drive from my PC. I've tried several times. At exactly the same time, with about 377MB to transfer I get a message saying 'There is a problem accessing Z: make sure you are connected to the network and try again'.
View 1 Replies View RelatedI had the 2 Wire Box that received TV and internet. Called my ISP and they gave me this access point to use instead. I hooked it up and it was fine for about 2 weeks. Suddenly for no reason it started dropping. Noticed it first when online gaming on my PS3. Checked laptop and all wireless devices down. Takes about 30 seconds.
View 1 Replies View RelatedWired connection to the router works fine. But it drops all the wireless devices (PC, phone, tablet) multiple times each day, sometimes only 30-60 minutes after reconnecting. Power cycling the router "fixes" the router and allows reconnection. There are 2 topics in the FAQ section that looked good: Getting poor or no signal from a wireless routerTop causes of dropping wireless connection on a Linksys routerbut clicking on those does not bring up anything.
View 9 Replies View RelatedI have a WRT120N, and have set up connections like this:
Desktop PC: Hardwired Ethernet
Laptop: Wireless
Xbox 360 (1): Ethernet
Xbox360 (2): Wireless
Networked Printer: Wireless
The hardwired connections are fine, but at random the Printer, laptop and wireless Xbox connections will drop out and i'll have to reboot the router to get it working again. I've tried everything I know of (i.e., Static IP, Port Forwarding) as well as a factory reset, but I continue to have this issue.
Set up: Router: WRT110 1 computer connected via ethernet cable 1 computer using a wireless nic card from cisco
The problem is thus: if the first computer is actively using the internet (even activities as mundane as browsing one's email) the computer connected wirelessly will lose its connection to the internet yet maintain its connection to the router. Both can be actively using the internet, but the wireless will seemingly at random drop internet access (usually in 30-120 minute intervals).
The computer connected via the ethernet cable was unplugged for a week and during that time the wirelessly connected computer was used extensively and did not lose connection once.
I don't understand how to even frame this problem in a concise manner, much less seek information as to how to resolve it. It's seemingly giving all priority to the computer connected via ethernet but I that's just intution speaking.
I recently changed the security mode on my router from WEP to WPA2 Personal. However, since that change, I've noticed that the wireless devices, 2-laptops, are intermittently loosing their connections. . I don't know if it has anything to do with the security mode change, but I don't want to go back to WEP for obvious reasons.
View 9 Replies View RelatedI bought a e4200 router about 3 weeks ago and after a power outage it decided it didnt like being connected to the internet anymore. So i got on the phone with cisco they determined the router was no good, mind you my laptop would connect wired. So they sent me a "refurbished" one, so i set it up. The new setup was wonky because it said the same message "Your connected to your router but..." then after trying to get the connection its self and failing it came up with "congratulations you are now connected to the internet". That lasted 3hrs and 45mins then died, so i went upstairs to power cycle it, it decided to connect with the old settings. That lased 25mins then died, so i reset it and reconfigured the router. Wouldnt connect, i checked my mac address and it was using my wireless one and kept turning on my wireless connection durring the install. So i cloned my wired mac address and got the internet for roughly an hour... then it died. So i reset it again and kept the wifi off got it going and decided to go to sleep. I wake up and its still working after 8hrs, i go down stairs with my tablet and i dies again. This time it refuses to reconnect, refuses to reset back up just doesnt want to work.
View 3 Replies View RelatedI just got an E4200 and have a SBG6580 cable modem. I cant seem to set this up properly and my connection keeps dropping. What is the proper set up ? I would like to configure it so the cable modem handles the DNS and the E4200 handles the wireless.
View 4 Replies View RelatedI have a WRT54G conected to a desktop through a wire, and conected to a laptop wirelessly. It starts working fine, and after a while i get no internet connection in my laptop nor my desktop. After this happens i disconect the power source from the router, i conect it back again and it starts working.
View 9 Replies View RelatedI've been using my Linksys WRT54GC for couple years now, and only recently have I started to have significant issues with the device. I'm using a 2012 Macbook Pro, and my internet connection seems to be randomly dropping every now and then. Sometimes it works just fine for couple of hours only dropping once or so, sometimes it starts dropping literally every few seconds. What I usually do is quickly restart my wifi and the connection comes back right away. I also tried not doing that, and the internet connection tends to come back up after a minute or so.
I have read countless topics, also tried many things: changing MTU, the thresholds in router settings, security modes (it seemed to have worked fine after I changed it to WPA, not anymore though. I'm using no password now and it doesn't fix the problem either), changing the channel (my strongest signals around are on channel 1 and 11, thus I left mine on 6), I even reset the router today (held the reset button for 10 seconds~) but it didn't work either. I didn't upgrade the software since I heard stories about the software available on this site being corrupted or something, bricking the router, which is the last thing I'd want (I'm running on 1.00.7 now).
I have the impression (but it's just an impression, it might as well not be the case, and just me trying to find out when it happens, since it's not always that it breaks the connection while doing that) that it breaks the connection on high load, I mean when I'm for example using skype and facebook, and then try to go on reddit at the same time - the reddit webpage won't load, and the connection is lost after few seconds. But it also started dropping every few seconds while I was playing an online game and skyping at the same time today, which isn't a particularly huge problem for a 23Mbps download and 1.5 upload speed internet I suppose, and which it never did before. I have never had such issues with my PC using a Linksys USB adapter. The connection would drop from time to time when, for example, accidentally going on pages with lots of thumbnail pictures, or trying to load 15 tabs of jpgs at the same time, it was never that much of a problem really though, I just thought it's normal.
I am using a brand new Linksys EA3500. We have 2 laptops connecting to it. One is an older XP machine which never has any problem. The other, a Vista machine, periodically drops the connection to the internet when connecting wirelessly. It never loses the connection to the Linksys EA3500 router, it just says "Access: local" and there is no internet. If I plug the Vista machine in wired to the router it works fine. I've tried my old router and I don't get this problem, which leads me to believe that my wireless adapter is functioning properly on the Vista machine.
When the vista machine drops the internet, I can still get into the router configuration at 192.168.1.1, but when I click on the tab which says wireless it sometimes says: "Router not found. You are not connected to your router." It says this despite the fact that I am connected to the router?I've tried reinstalling Windows, that didn't make any difference. I am convinced that it is a problem with the router, but I can't find any settings to adjust which remedy the situation. Of coarse, I've tried reseting my modem and Router many times...doesn't resolve the issue. I've also gone into DOS and done an ipconfig release_all and renew_all.
Set up:Router: WRT11.1 computer connected via ethernet cable.1 computer using a wireless nic card from cisco.The problem is thus: if the first computer is actively using the internet (even activities as mundane as browsing one's email) the computer connected wirelessly will lose its connection to the internet yet maintain its connection to the router. Both can be actively using the internet, but the wireless will seemingly at random drop internet access (usually in 30-120 minute intervals).The computer connected via the ethernet cable was unplugged for a week and during that time the wirelessly connected computer was used extensively and did not lose connection once.
View 2 Replies View Relatedever since i had a power failure losing all power in my apartment, my router has begun regularily losing connection to the internet, I have to go into the router and renew ip address which is quite annoying
[code]....
I have e4200 router and i notice sometimes when i am browsing that dops connection.
View 9 Replies View Related