Linksys Wireless Router :: E1550 Fast On Wired Connection
Apr 2, 2012
I have a Linksys E1550 Wireless Router that is fast as can be on the wired connection, getting 30mbs from the cable modem connection. If I switch to using wireless on the same PC, the max connection speed I'll get is 2mbs. I've changed all sorts of settings trying to get this working right, and it still stays at 2mbs.As an additional note, this router was previously working fine at 30mbs on wireless as well, then out of nowhere this weekend, it started running at 2mbs. I went and purchased another of the same model and it is doing the same thing as well.
What is the secret to having this run at it's correct speed, not this slow 2mbs that it is now? I have configured this the same as every other Linksys router I've had in the past, and it is running horribly slow..I'm on the newest firmware as well, have already verified that. The old router was updated to newest firmware as testing to resolve this, and the new router came with it installed already.
View 6 Replies
ADVERTISEMENT
Nov 17, 2011
I have a Cisco linksys router e1550. My wireless network is working fine, but my wired (PC) is not working?
Removing the router and having the modem connected to my PC works but when I put on my router my wired connection only works for a few seconds to none
So I think the router may be causing it, could it be the settings? Even though there at default.
View 1 Replies
View Related
Feb 16, 2012
I replaced a WRT54G2 V1 with a E1550 earlier this week. This router connects a sub-net of our office to the main network of our office. When the WRT54 was in place everything worked without a hitch, but the E1550 keeps dropping us from a server we have on the main network. The WRT54 is back in play until I can figure this out.
View 1 Replies
View Related
May 19, 2012
I have a E3200 Router and when the computers are connected directly to router (Wired) the speed is SLOW and when computers are connected via wireless the speed is fast (normal). What can i do to have the wired computer with same fast speed as wireless?....i'm i missing something?Here are the speed results:
All wired computers connections (total of 4) downwload speed ranging from 8 Mbps to 13 Mbps.
All wireless computer connections download speed stable at 49 Mbps.
View 2 Replies
View Related
Mar 30, 2012
I've read the various threads on here and tried all the fixes suggested and I still cannot get my PS3 to "see" the USB drive I've attached to my router.I can see it and access the files from a connected computer, but not the PS3.I've tried creating a share with one directory and sharing the entire partition with no luck. I've enabled all the FTP options with no luck. UPNP is enabled. I've tried setting up the guest account with no luck.I've tried restarting, unplugging with no luck either. I also went into the USB drive and reformatted and started all over again.My PS3 can easily see the other computers on the network, but I would like to use the USB port on the router to not have to have a computer running to stream music.Is there another menu location on the PS3 I should be using to locate the USB? Currently I just look under music or video and the other computers are there. Just not the USB.
View 1 Replies
View Related
May 16, 2012
I have a Linksys E1550. I would like to extend its range by using an old Netgear N600 I have laying around. I know the Netgear can be used as a repeater. I do not know what settings I need to change in my Linksys router to be able to use a repeater.
View 5 Replies
View Related
Oct 22, 2011
i have a linksys e1550 router and ive been trying to look up a way to make it connect with my nintendo ds lite
View 3 Replies
View Related
Aug 9, 2012
I have a E1550 with a corrupt config that is acting very wonky lately (shows wrong info in some of the settings and doesn't always save changes). Since it may be the config that is at issue, I don't want to do a backup/resote, rather I plan to do a full factory reset and manully type everything back in.What would be nice is, creating a text based, human readable printout of the config for reference so that I don't have to manually type it all twice (once to save it, once for reentry). PS3 ports, MAC filters, etc. have several entries, and they way the pages are designed it doesn't allow for easy, whole entry, cut and paste.
View 5 Replies
View Related
Nov 8, 2011
how to access an E1550 wireless router's settings and configure it to connect to my wireless DSL router? The DSL phone line is not located anywhere near my TV/DVR/Roku and I'd like to connect them wirelessly to our DSL router. The E1550 is next to the TV/DVR/Roku.
View 6 Replies
View Related
Apr 6, 2012
I reset my E1550 wireless router with the red button under it. Ever since then I can not connect to internet.
View 3 Replies
View Related
May 14, 2012
My objective is to use the USB port on the E1550 to share an external hard drive for my family's shared media files.I have moved into a rental home with little cat5 wiring. Internet service is Uverse.Given the wiring situation, I bought a netgear universal dual band range extender which connects wirelessly to the uverse router in another room. My home office equipment (computer, printer) are wired into the netgear. All of that works fine. The netgear is 192.168.1.66. The computer is 192.168.1.128. So, I wanted to add the E1550 into my network. I can see it as an attached device on the Netgear's admin page, but cisco connect and a direct ip http://192.168.1.68 does not resolve. I have the e1550 connected via a lan port on the netgear extender (there is no other option). I have gone from that lan port to the internet port on the e1550. I have done so with a staight Cat5 cable and with what I believe should be a cross-over. In both situations, I see the router via the netgear admin page but can not connect to it. I'd prefer not the hang my usb drive off of my computer because it if gets turned off or reboots due to a MS Windows auto update, it leaves the rest of the house with no shared media during that process.
View 1 Replies
View Related
Mar 23, 2012
I tried to connect to my E1550 router admin page at 192.168.1.1 and I'm not seeing the login page. I'm getting an error. I've always been able to get to the admin page. I'm not sure what changed. I tried changing the IP# and subnet mask of my laptop and I still can't connect. I tried resetting the router to factory defaults.
View 1 Replies
View Related
Jul 25, 2012
E1550 not connecting to any Google related sites via Kindle Fire web application (Silk) in Kindle Fire. Other wireless devices working fine from E1550 and all apps in Fire connecting fine.
View 5 Replies
View Related
Mar 29, 2012
I have an E1550 less than 1 year old. Lately, I have been losing internet on the AT&T modem. I called AT&T but as part of their diagnostics, I have to plug the modem directly into the PC. I have loaded the latest firmware to the E1550.Lose Internet but wireless connectivity to router exists.Internet light on modem is out (modem is connected to router)Unplug modem and leave off plug in, internet light is still out.Unplug router, plug router back in - no internet connection but do have wireless connectivity to router.Take cable from modem to router and plug directly into PC internet light comes on in modem and I have internet from PC.Take cable from PC and plug back into router .I have internet via wireless.What I can't figure out is what could be happening in router that would impact modem internet connection. I have replicated this at least 3 times. Yes, the modem is a bit old, but since plugging it directly into the PC works, I'm thinking it has to be the router and I cannot figure out why unless there's some sort of electrical thing going on in the router.
View 4 Replies
View Related
Sep 18, 2011
I had previously posted about problems with the E1550 not being able to recognize NTFS formated hard drives. After multiple retries and reformats I was finally able to get it to work and was able to backup my system files to that NTFS hard drive.
Now, little more than a week later I setup to run my backup to run again and once again the E1550 is not accessing the hard drive. The same one it had previously acknowledged and allowed me to save to.
The E1550 sees that there is a hard drive out there but all it says is "Detecting..." this does not change.
I need this to be fixed and stay fixed. If it is going to do this every time I turn on the drive to do weekly backups, then I need to get a different wireless router.
View 5 Replies
View Related
Aug 30, 2011
I installed a Linksys E1550 wireless router at home and I moved an external storage drive from the old computer (soon to be gone) to the router via the USB port in the router.
I can see the drive and files on the router on both the old computer and the new laptop, but I can't do anything with them. When I look at permissions for any given file it says: "Everyone" has read and execute only. "root" has Full Control, but I can't gain access to the "root" userid. I have gone through the router setup and folder/file properties using the "admin" userid and the router acknowledges that it is there, but it won't allow me to add permissions for the "admin" with "Full Control" to any of the items.
It won't even allow me to add new files, even though I have setup sharing for the entire partition.
View 4 Replies
View Related
Apr 9, 2012
So, what I essentially want to do is share the device connected to the back of my router so that I can remotely access it over the internet. Much like the manual says you can do.
But I'm having trouble. I've currently got the port set at 38, but the website never loads.
View 1 Replies
View Related
Aug 9, 2012
I may be replacing my e1550 soon and am looking at both the N750 and N900 class devices. While the EA3500/4500 seem to be a really good deal with a lot of bang for buck, I do have one concern...
As I have zero intention of ever using Cisco Cloud Connect, I would need to stick with the Classic firmware. While Cisco did quickly push out a solution to get the routers back to Classic after the initial Cloud Connect deployment fiasco, I cannot seem to find any commitment from Cisco to continue to support the classic interface (other than "“Cisco will continue to support both local and cloud management options for our customers.”). Even more disconcerting is that the current evidence seems to indicate that they are not. [code]
So, while I do understand that many of the updates have been Cloud Connect specific, some of these changes are in fact global/driver updates. As an example, according to the release notes, on June 25, 2012 the EA3500 CCC firmware v.1.1.38 (Build 138143) updated the WiFi driver, apparently the Classic never received this update.
View 9 Replies
View Related
Apr 11, 2012
I have a WAP54G in my basement shop, wired to our main router upstairs, which is a Linksys BEFSR81. I'm not sure if this is an issue with the WAP or the router.
I only use the laptop computer in the shop every couple of days, but I leave the laptop plugged in and on most of the time. I used to have the power settings such that it didn't power down completely even after a long time. With that setup, if i didn't use the computer for several days, it would find that the connection to the router had died. The wireless link would report that it had a solid connection, but I couldn't connect to anything. Power cycling the WAP always fixed this.
Recently, I decided to save some wear & tear on the laptop drive, and adjusted the power settings to go to standby after a couple of hours. Now, it seems I can't even go one day without losing my connection.
I am running the latest frimware in the WAP, and the router is version 3.1. I can't check the firmware version on the router at the moment, because the web interface is giving me a blank screen. I know from past experience that I will have to power cycle it to get it to talk to me again.
In any event, it seems like the router connection to the WAP is timing out. I set the router "client lease time" up to 10000 a while back when I first had this problem, but that is clearly not doing the trick.
View 3 Replies
View Related
Sep 22, 2011
I recently purchased a E1550 that works fine until I tried adding an external USB HDD for storage. The drive is a Western Digital 500MB drive I used to use for backups. Had no issues setting up the share and was able to access it just fine. But a few hours after hooking it up, my wireless devices could no longer connect and I could not access the admin page to see what was wrong. The E1550 was still pingable and my wired devices could still access sites through the router. Cycling power to the router did not work. What did get things working again was removing the USB drive (which killed all wired connections as well) and then cycling power. The E1550 was fine after that.
View 2 Replies
View Related
Jul 19, 2011
I just set up a new computer with win 7 - 64. The cable broadband download speed is less than 1 meg/sec. My wife and daughters computers, which are wireless, see now slowdown. My computer is connected to the router thru the ethernet connection. The previous computer using win xp - 32, plugged into the same router had no unusual speed problems. I did turn off the windows 7 firewall. Did no good.Could there be some incompatibility between the router and win 7 - 64?? Are there some settings that need changing?
View 1 Replies
View Related
Mar 5, 2013
I bought my own modem, a Motorolla Extreme something or other, is a DOCSIS 3.0. My router is a Belkin N150. When I plug my desktop computer directly into the router, I get speeds upwards of 50Mbps. The wireless, however, gets about 0.15Mbps download, but as much as 12Mbps upload.
I know it's not computer specific, because I plugged my laptop directly into the modem and got the full speed. AND I put a wireless adaptor on the desktop and got the slower speeds.I live in a densely populated area and there are 27 other (visible) wireless networks available (all locked, unfortunately. Otherwise I wouldn't be in this situation in the first place). So I tried every channel, doing a speedtest with each, and I got almost identical results each time: 0.12-0.17Mbps download, 11-13Mbps upload. I can't imagine that getting only 0.15Mbps could be a result of a channel being clogged, but I tried it anyway;
View 2 Replies
View Related
Nov 30, 2011
I'm capped out at 12 mbps service through Mediacom. My PC is directly wired to the WRT120N. I consistently test in the 11 mbps range.
I have a very unusual issue though.
I can connect my iphone and Xbox wirelessly through my router with no issues on their side. However, any time I do so, it kills my wired connection on my PC. I'm not doing huge downloads or P2P or anything like that. In fact, the speed drops immediately on my PC the moment I connect my phone to the wireless network regardless of what i'm doing on the phone (checking email or loading a webpage).
View 2 Replies
View Related
Feb 15, 2013
I have an E1200 acting soley as an AP. Everything works just fine, but when I try to copy files from one wired computer(both Windows 7) to another one on the same router(the E1200 in this case), the network utilization is only about 4%. If I take one of the computers off its wired connection and make it wireless, the utilization goes up to about 50%. Also if I take one of the compuyters off this router, and make a wired connection to my main router(which is connected via a wired connection to the E1200), the network utilization goes up to 50%.
View 3 Replies
View Related
Jun 24, 2012
I have the WRT54G router for years and use it to provide both a wireless network for our home computers and a wired network for by internet phone that connects me to my office phone system and for my work computer and printer. Last week, the wired network stopped working. I checked the wiring and plugged my wire into all four of the ports in the back of the router with no success. I followed the troubleshooting procedure that I found and changed the MTU setting. I tried to update the firmware but the screen seemed to lock up and I was unable to complete the task.
View 9 Replies
View Related
Sep 11, 2012
I have a WRT120 wireless router that works fine, but the wired connection has failed. I have restarted the modem, router and the computer and still doesn't recognize the wired connection.
View 9 Replies
View Related
Jan 2, 2012
I lost all Internet connnecitivity on my Linksys e3000. After determining that my cable modem was connected and working correctly, I pulled the e3000 and put my old wrv54g router in place. Wireless worked, but all wired connections showed link but no other apparent connectivity. Neither of my desktops could get a DHCP lease.
At that point, I purchased and manually installed a new e4200 router. All worked fine. Both laptops connected via wireless and both desktops via my house LAN. Until this morning (Monday). Wireless is working just fine, but both wired computers show 100 Mbs connections on an unknown network with no DHCP. Checking status shows packets going out, but nothing coming in. Checking LAN status on the router shows that both ports are connected, but it does not appear to receive anything from either desktop. All was fine last night. Oh, the router is on 1.0.03 firmware.
I have tried about everything I can think of. Configurations both on the router and the desktops (one Windows XP, 64 bit and one Windows 7) and all seems fine. I have disabled and reenabled the network connectors, rebooted both the router and the computers, etc. Nothing seems to work.
View 5 Replies
View Related
Jul 3, 2012
I have a problem with my new router. I connected't my iMac (27" 2010) and NAS Synology 1511. My problem is the slow connection between mac and router - only 100Mbit (ethernet port on mac is 1Gbit), strange thing... my NAS have 1Gbit with no problem, and the mac is not. I trying manual configure - forcing speed to 1Gbit, but then is no connection at all. I'm also trying changing wires, but no change. Im buying special ethernet cable cat 6 - also no change. Changing ports on router - result the same.
View 7 Replies
View Related
Sep 6, 2011
Can we disable wireless totally in E4200 and just use wired connections? I didn't see any configuration for that, but just in case I missed it. I'm also aware we can disable SSID Broadcast.
View 1 Replies
View Related
Apr 12, 2013
In our area Comcast has increased the internet speed to 50mb. I have a six year old WRT54GL. Can this router pass 50mb through to the computer on a wired connection?
View 5 Replies
View Related
Mar 30, 2013
I just had Comcast setup my internet and it is really fast. 30 down, 10 up, 40 ping, my connection to my computer (wireless) is very fast and my online gaming (wired) is not laggy at all.The problem lies with the connection dropping when I am online gaming. I connected directly to the modem and there's no problem at all. I connect to my Linksys EA3500 and once I start playing in an online game, I disconnect from Xbox Live and am dropped from the game... anywhere from right away until about 10-15 minutes into the game. This is the only time where my connection falters at all, otherwise it is great. But I play online a lot, and competitively, so I obviously need a stable connection.I have not had this issue with my previous ISP in New York, Time Warner and that connection was much worse. I'm thinking it must be a setting on the router that is causing this, but I can't pinpoint what. I tried automatic AND static connections from my xbox to the router. On the static connection, I even put a DMZ on it, but to no avail.
View 9 Replies
View Related
Nov 10, 2011
My printer (HP7210) is wired connected to my WRT54GL router. 2 computers have also a wired connection, my laptop is connected wireless. All these computers use the connected printer. 2 computers can only use a static IP-address for the printer. How can I set a static IP address in my router?
View 3 Replies
View Related
Dec 28, 2011
I just connected a WRT190N v2 Wireless Router to my XPS 400. When my wife tried to connect our other desktop to the wireless network, everything seemed fine. I noticed that, when she wasn't actively browsing or using the network, her computer would lose connectivity, but regain it when a browser was opened. When I tried to use the XPS, I found that it had no connection. I regained connectivity after using the Windows Network Diagnostic tool, but neither computer seems to keep connectivity when left alone, at least for very long.
View 1 Replies
View Related
