Cisco Firewall :: Allowing FTPS Access In ASA5510
Apr 13, 2012
We had an ASA 5510 as a firewall in our environment, and there is a requirement to access an ftps server from our location. Currently from the server location they configured everything by allowing our public ip to their server and gave the following details to access ftp.Please suggest which traffic needs to be allowed in our ASA to access the ftp server address as mentioned above. From my initial analysis, it's found that 989 port is also enabled for the access, but that was not mentioned by them.
View 1 Replies
ADVERTISEMENT
Mar 1, 2011
I ' m not able to configure the asa 5510 to allow the multicast traffic to pass through ASA.The multicast traffic have to pass from inside interface to outside interface.Can I configure the multicast traffic to pass through asa with a static nat ?
View 1 Replies
View Related
Aug 7, 2011
I am using an ASA5510 for internal firewalling in my QA environment. How do I allow RDP from one subnet to those protected by the firewall? Preferably using the ASDM.
View 25 Replies
View Related
May 16, 2012
I found the link that effectively said PIX/ASA 7.x does not support FTP with TLS/SSL (FTP/FTPS). I can't find anything which states whether it works on a later release? We have 8.2(1) and we are struggling to implement it. The FTP/FTPS server is in the DMZ and is hosted by Windows 2008 IIS 7.5. How to get this solution implemented, as the contractor from our local Cisco vendor spent 3 hours on it and couldn't get it working this morning.
View 1 Replies
View Related
Mar 19, 2012
there was remote FTP - users behind ASA5540 can connect to it.
Now, with this ftp there is SSL/TLS encryption added and users behind this ASA can't connect to this FTPS.
It this possible for users behind ASA to connect to FTPSs?
View 2 Replies
View Related
Jan 26, 2012
I have an ASA 5550 at our main site with an external ethernet interface to our ISP for internet access. I would like to allow 10.100.41.x/24 http / https access but block this network's access to all other internal networks including 172.17.x.x,, 10.100.1 - 40.x, and others. I'm having trouble identifying what IP address to use as the desitination for the permit rule for access to the internet. The rule that comes after the permit is to deny 10.100.41.x/24 access to internal network addresses.
View 1 Replies
View Related
Feb 11, 2013
I have a problem when trying to access from a workstation on the internal network to an external FTP server using Explicit FTPS. After the server requires the client TLS Authentication the client inits TLS but the connection is closed by timeout.
I have disabled the FTP inspection on the firewall and I have opened some high ports from the Internet to the test workstation (ACL and NAT rules), but without results.
If I try to connect from a workstation to the FTP server using a direct Internet connection I can access the FTP server without problems, so I think the problem is in the ASA.
View 6 Replies
View Related
Jan 8, 2012
I'm a college student working on a lab involving a Cisco PIX 501 Firewall.
My project involves 1 computer and a firewall. My goal is to use the firewall to allow access to the internet for that computer which uses a static IP 192.168.1.5 and ONLY for that IP address. The firewall is connected to the internet.
I have the computer hooked up to the firewall with the serial and using hyper terminal to enter commands. I think I need to use access lists in order to deny traffic on those ports for those particular hosts. I can't figure out exactly how I need to set it up.
What I need to do is permit internet access for 192.168.1.5 alone. Any other IP should not be able to access the internet.
I tried:
access-list 1 permit tcp host 192.168.1.5 any eq 80
access-group 1 in interface inside
I cannot access the internet using the computer with 192.168.1.5. The goal is to be able to access with that IP and no other.
View 6 Replies
View Related
Aug 20, 2012
We have a Cisco ASA 5520 and Web sense. I added a filter but it seems like it is still not allowing us to access a certain website from most of the machines however some machines with the same configuration work on the DMZ. Accessing website tells us:
"Firefox has detected that the server is redirecting the request for this address in a way that will never complete".
Filter I applied on the firewall:
filter url except 0.0.0.0 0.0.0.0 64.18.218.0 255.255.255.0 allow
filter https except 0.0.0.0 0.0.0.0 64.18.218.0 255.255.255.0 allow
View 9 Replies
View Related
Apr 24, 2012
I have a computer behind the ASA 5505 firewall. The computer needs to access Microsoft Activation Server. Reading some website information, I need to allow a huge list of servers that basically points to www and https traffic. Therefore, looking at this heavy requirements, I prefer to allow this computer to navigate to any https or http (www) server outside of the firewall.I have included my current asa 5505 configuration. [code]
View 3 Replies
View Related
Dec 18, 2012
i bought a cisco 2950 series switch to play around with and im trying to set it up to SSH. I have google'd a bit on how to do this and i've sort of hit a wall... i have downloaded the cryptographic image from cisco's website, installed a TFTP server (think this is where my issue lies) but when i do the copy tftp flash global command i keep getting the error accessing "xxxx" message.I have tried allowing the server through windows firewall, disabling windows firewall, allowing access through the router..
View 6 Replies
View Related
Jan 23, 2012
We have a Cisco wireless infrastructure in place that includes a guest network with its own subnet that is a sub interface of the inside interface on our ASA 5520. There are no routes for it to be allowed access to the internal subnets. So it can only access the internet. This is primarily used by the public, but we have several non employee personnel that we only want to give internet access and force them to access the internal network through our clientless SSL vpn portal or through other internet facing internal resources such as webmail.I have done packet traces from within the ASA and the break appears to be there is no ACL allowing the traffic back into the network once the web resource replies to the request and the traffic is attempting to come back into the network from the web resource. Is that as clear as mud?
I know that this has to be a common problem and a way around this is to allow the guest wireless network access to the internal network but only for the select resources that they require. And that this can be done seemlessly by network specific routes and or alternate DNS entries, but I would like to keep this simple and just allow them to access the web resource, webmail and VPN, from the guest wireless using internet DNS servers without route trickery.
View 8 Replies
View Related
Feb 12, 2012
i am using Cisco ASA5510 Firewall in my Network in the distrubition Layer .Private Range of Network Address use in the Network and PAT at the FW for address translation.presently encountering an issue the users behind the FW in my network unable to RDP at port 2000 presented at the Client Network.Able to Telnet on port2000 but not RDP . any changes needed at the FW end to get the RDP Access.
View 12 Replies
View Related
Aug 30, 2011
Recently implemented an ASA5510 and I cannot setup RDP access. I've browsed these and other forums and tried all the suggestions that I've been able to find and still no luck.
View 13 Replies
View Related
Sep 5, 2012
I have configured a ASA5510 for clientless access by using the ASA http bookmark. The web server require an authentication by sending a web server logon screen. If I enter the user credentials at IE7 or IE9 browser on the the web server logon screen the authentication fails, the web server logon screen appears again and again without any error message. If I use the firefox browser instead of IE browser the web server authentication works without any problems. These problem appears only by using the ASA device, the local lan access with IE7 and IE9 and web server authentication works without any problems. Is that possible to configure the ASA http bookmark with the domain credential?
View 4 Replies
View Related
Feb 7, 2012
I'am using ASA5510 and I configured a VPN IPSEC. When I connect to the vpn with a windows client ( using windows vista) , I have access to the network ressources but when i want to go on the Internet it doesn't work. (particulary with Internet explorer, it works with Firefox!) Furthermore,On other windows client I haven't this problem.
View 4 Replies
View Related
Aug 7, 2012
Cannot access to cisco asa5510 asdm nor ssh thru anyconnect vpn, attached is the current configuration. user authetnicaties aaa locally and has admin service-type. When vpn session is established, it lets me go thru the certificate warning and when trying to install the asdm laucher its failing. ssh access is enabled but not working. i can access both asdm and ssh from the inside network, and from a pc on that network.
View 9 Replies
View Related
Feb 7, 2012
For years now we've had an ASA5510 running an old version of ASA/ASDM (7.0/5.0) and couldn't access ASDM through a modern system with a recent JRE, so we didn't bother with this.
However, we've recently upgraded ASA/ASDM for purposes of adding failover and want to be able to access ASDM through our site to site tunnel. The site to site tunnel gives us access to the VLAN that the firewall is the gateway for, but not access to the firewall itself.
This side of the network is the 10.1.55.0 subnet, and that side of the network is the 192.168.1.0 subnet. I can ping devices on the 192.168.1.0 subnet, but not the firewall, (not that I really need to) and devices can ping me back. I can access ASDM through RDP or ssh into a server on the 192.168.1.0 subnet, but not directly from the 10.1.55.0 subnet.
This is the current config relative to the 10.1.55.0 subnet:
access-list trust_nat0_outbound extended permit ip 192.168.0.0 255.255.0.0 10.1.55.0 255.255.255.0
access-list untrust_cryptomap_600 extended permit ip 192.168.0.0 255.255.0.0
[Code]....
As far as I'm aware, the tunnel comes into the firewall through the untrust (public) interface, because that is the destination of the tunnel on the 10.1.55.0 subnet side.
What am I missing here that would allow asdm access through the untrust interface for the 10.1.55.0 subnet?
View 27 Replies
View Related
May 30, 2013
I have a fresh out the box asa5510 with 8.4 on it.I have built these before but for some reason cannot get this one to work. I am consoled on, have applied the following config but can still not ping to or from, can not asdm, cannot http/s. Arp table shows device it tries to ping, but device trying to pping it has incomplete arp entry. [code]
View 7 Replies
View Related
Aug 23, 2012
The old syntax that I am much more familiar with has been deprecated. On older IOS it would have been something like static (inside,outside) tcp 209.114.146.122 14033 192.168.30.69 1433 netmask 255.255.255.255 Plus an extended ACL to allow the traffic.I am trying to create a Static PAT to allow a host address to access our Network through an ASA. I have external address 209.114.146.122 that I want to hit the external interface on an obscure port (say 14033) and translate that traffic to an internal host address on port 1433.
View 11 Replies
View Related
Jul 17, 2012
I have 2xASA5510 with securityPlus license.i have configured 3 context and Active/Active Failover.Everything works fine. But also want to use rometeAccessVPN but couldn't fine anything for VPN. does it support VPN in multiple mode?
View 3 Replies
View Related
May 18, 2011
Abruptly internet access disappeared. It's a router issue, none of the computers here can connect. Further, I can't access the router through a browser - 192.168.0.1 results in a "Firefox cannot connect" message. I've tried resetting the DNS to no avail. I'm typing via cell phone and it's annoying, but I'm willing to try about anything.
View 4 Replies
View Related
Jun 6, 2012
ASA 5510 have two model Bun-K9 and Sec-Bun-K9 from the datasheet find out difference Port related and Redundancy. My questions is : Have any major difference for Security service between two model ?
View 3 Replies
View Related
Sep 10, 2012
I've recently had to move an AS400 system behind an internal ASA firewall and now users are unable to browse to it.The ASA is running Version 8.2(5)? I get these messages: Sep 11 2012 17:09:59: %ASA-7-710005: UDP request discarded from 172.19.241.35/137 to outside:172.19.241.255/137?Is there a way to enable these ports without enabling NAT?No VPN's involved, just an inside and outside eth interfaces?
View 12 Replies
View Related
Oct 31, 2011
I've got an annoying problem with my ASA 5520.I have traffic going from the inside interface (security level 100) to the outside interface (security level 0) with a global PAT applied to the outside interface address for all inside traffic - and I can't seem to traceroute through the firewall.The ruleset is simple - basically, allow any IP from inside to outside. The NAT is simple - PAT all traffic unless exempted to the IP address of the outside interface.If I do the trace from my internet edge router it works fine - so I know it's not soemthing my uplinks are filtering - but if I do it through the firewall, I get perfect responses until the hop where it hits the firewall interface - then nothing.Is there something I am missing that I need to do to allow traceroute to just work with all the rest of the traffic?
View 2 Replies
View Related
Mar 17, 2013
I have a 7100 router that has some servers behind it. I need to translate each server to a public IP. The only thing is that between the outside world and the router is an ASA. We have a small data center where the ASA is connected to a core switch on the inside and the ISP on the outside. How would I do the NAT/PAT translations on the 7100 and then have them pass through the ASA? for example:
View 6 Replies
View Related
Oct 4, 2011
I am trying to configure Zone Based Firewall (IOS 15.2T) on Cisco 881 router for IPv6. Current setup is simple:
Zone:
LAN --> WAN zone security LAN
zone security WAN
!
class-map type inspect match-any Internet-cmap
match protocol dns
match protocol http
match protocol https
[ code ] ........
Current configuration behaves as expected for IPv4, but blocks all IPv6 traffic. If zone-security is removed from WAN interface IPv6 works normally (connected to Internet). As soon as zone-security is enabled on WAN interface all IPV6 traffic is discarded when connecting to Internet from local LAN.
Error messages on console: Half-open Sessions source destination tcp SIS_OPENING/TCP_SYNSENT
Are there any special settings for ZBF which should be turned on for IPv6 protocol?
View 1 Replies
View Related
May 15, 2012
Let me start by saying that I'm just starting to study for CCNA, so the ASA seems to be a bit above me yet. The ASA's we are using is for VPN to our corporate office and only allowing access to our Citrix environment, so no direct internet allowed. We have a person who works in the remote office who has need for a caption telephone that requires direct access to the internet. The phone only supports DHCP, and getting the ASA to do an ARP reservations is proving difficult. For now I wrote an access list to allow it's DHCP address out but it still isn't working. The access list I wrote is:
access-list 101 extended permit ip host xxx.xxx.xxx.124 any log
access-list 101 extended permit ip any any
access-group 101 out interface outside
When I do a show access-list I'm seeing that traffic is hitting the access list as the hit counter has increased. When I do a show conn I'm seeing one of the IP's that the phone should have access to, however the flags are: saA, so I'm assuming they are not getting a response. According to the manufacturer, only outbound connections are needed, no incoming ports required. All traffic is TCP.
View 8 Replies
View Related
May 22, 2011
I have 3 networks coming on DMZ (VPN) interface. Only one network is able to ping the DMZ interface. See below networks coming i on the DMZ.
10.132.24.0/2410.132.25.0/2410.132.26.0/24 Only the 10.132.26.0/24 netork works as it is in the same range as the DMZ interface.
allowing the other two networks to communicate. I've attched the diagram and configs for your perusal.
View 1 Replies
View Related
Mar 15, 2012
I am trying to switch out a cisco pix 501 firewall with a cisco ASA 5505 firewall. I am not very familiar with all of the commands for the firewalls and have always relied on a standard command line script that I use when building a new one. Unfortunately, my script is not working with the 5505. What I am doing wrong with the following script? I've masked public IP info with xxx.xxx.xxx and I run it right after restoring the firewall to the factory defaults. I am able to get out to the internet if I browse directly from one of the servers, but cannot access a web page when trying to browse to it from an outside network. [code]
View 7 Replies
View Related
Sep 17, 2012
I have the following: redundant ASA5520s on v8.2(1)proxy server/web filter for blocking access to websites for staff/studentsusers who want to use SkypeCisco Catalyst 4507 corea dozen VLANs for staff/student/WiFi etcCisco core policy that routes 80/443 to transparent proxy on a WiFi VLAN Windows desktops have direct proxy settings in IE .Pretty much all outbound ports are closed with 80/443 and a handful of specifics for various things open. Because of this Skype attempts to use 80/443 which are sent to the proxy server but bnecause they're not HTTP/HTTPS they cannot be understood. Skype attitude is to open 1024-65535 which is just plain stupid!
There's no way to specify which port(s) Skype uses for outbound. I tried opening 33000-33099 which worked perfectly for 2-3 devices (Win laptop, iPad) but others failed all the time.I've seen people mention using an AIP-SSM module in the ASA for blocking Skype (and other things eg torrents). Is it possible to use this module to allow Skype eg on ports 1024-65535 whilst blocking any other application from using those ports?
View 2 Replies
View Related
May 31, 2013
Attached is our network diagram showing the details of our remote office and the corporate side which are connected via private fiber. The workstation (10.10.102.84) can ping the 10.20.0.31 IP address of the PBX but not the .30 address and I know if we can’t ping it we can’t remotely manage it. The 2811 router, ASA 5510 and the 6509-E can ping both IP addresses on the PBX. The ASA logs the error "Denied ICMP type=0, from laddr 10.20.0.30 on interface inside to 10.10.102.84: no matching session" when the workstation pings the .30 address.
We changed the default gateway of the PBX from 10.20.0.2 to 10.20.0.1 (2811 router) and we were able to ping both IP addresses from the workstation but the SIP trunks from the Internet stopped working (they NAT to the .30 address). Because calls may be forwarded from the PBX to the corporate network (via IP phones) we will eventually need to change the default gateway to10.20.0.1 and still need the Internet SIP trunks.
My two questions are, how do we resolve the issue of pinging the .30 address from the workstation and then when the time comes how do we resolve the issue with the SIP traffic reaching the .30 address when we change the default GW of the PBX to the 10.20.0.1 address of the 2811 router.
View 9 Replies
View Related
Jan 14, 2012
I just bought the 655, mainly for school/Xbox. My parents use it also, but I bought it for myself mainly (shh). I set it up correctly and got connected, but suddenly I wasn't allowed Internet access. The router connects to my laptop, but won't get Internet access. I called customer service and he didn't know what to do. We tried everything he knew and nothing worked. I don't want to return the router cause I read it was very good, but I need internet for school. I have Rev. A and F/W 2.00.
View 8 Replies
View Related
