im deployment and we have hardwire internet in my room. wanting to use all other devices eg. iphone and what not i bought a router to plug the hardwire in to and run the wifi off the router for all devices. its made by TP-LINK the model is TL-WR940N. it worked great for a while but then kept giving me DNS server is not responding but i could plug the hard cable in my computer and the internet would work fine? so i reset the router and set it all up again like before. Now i cant get it to run wifi off it anymore it recognizes and connect through wifi but no internet and its telling me i need to plud the hardwire in to my internet but my computer is recognizing it and saying i have internet access, but no internet i mean its not even thinking if there is internet.
I originally bought the 615 router because my Net Talk telephone required it. The first Wi-Fi device I used is my Kindle Touch. I have been able to use the Wi-Fi several times since I received the Kindle, but there have now been two failures to connect. The first time I just unplugged the router power and connections, restarted the modem, and rebooted my computer. The Wi-Fi then worked. Now I am experiencing a failure to connect again.
I have noticed that when I restart my computer I have to connect to the internet directly by pulling the cable from the router and putting it from the modem to the computer. This seems to teach the router what it is supposed to do, because when I reconnect the modem to the router the internet starts to work immediately.I have tried changing the password to wireless internet, but my Kindle still will no longer connect. The router is about two years old. [code]No go to the devices and check to see if you see the new SSID name you gave in the router. I should be listed there. Select it and it should ask you for a password, enter the password you gave in the router. The only problem is that my modem does not exactly say "mixed G and N".
I've had this problem for a while. I'd only get a dial-up icon with a red cross after startup or diagnostics, and no wireless networks could be detected. So I installed the HP wireless assistant, and restarted the laptop. It started working fine. Today, the icon went yellow with limited access, so I ran troubleshooting. And the problem was back. The dial-up icon reappeared, and the wireless assistant showed the WLAN was disabled. I checked the device manager. The wifi link 5100 AGN had a yellow mark on it, and in properties tab, it said ' the device is not working '. I scanned for hardware changes, and the 5100 AGN disappeared ! I restarted my laptop, and now its nowhere to be seen. Even the wireless assistant now shows only 'Bluetooth' as a connection.
I've been having some trouble with my ATT router. I've had it for months and there have never been any issues until now. It does not seem that it is broadcasting WiFi like usual. It will not show up on the WiFi network list on both my iPod and my laptop. I've tried resetting the router (by unplugging it and plugging it back in).
No WiFi access from working router.I was trying to set up my AppleTv and by accident unplugged my router...I have unplugged my router & modem several times and they all show the light that the network is on..But I cannot access the WiFi network from my Ipad or Mac?what else can I do???
The other day, I decided to set up a wifi router. Once I'd set it up, I connected my other devices to it, (laptop, iPad, iPod, etc.) but when I tried to connect my PS3 to it, the connection just timed out when it was testing the connection. I've tried it a few times - I thought maybe I'd typed in my WPA key wrong, to no avail.
I have 3 Kindles (2 Kindles with keyboards and 1 kindle touch) that have wifi and they were working fine until our 2Wire router died and we got a new Westell DSL Wireless Gateway from ATT (model: B90-755025-15). All of our other wireless devices are working fine (Ipods, laptop, Ipad) with the new wireless router, but the Kindles will now not connect to our wifi network. I type in the same network key that I did for the other devices but it doesn't work. Amazon said all sofware was up to date on the kindles and it is a problem with the settings on the router because they were working before we got the router. AT&T won't work for me because they say the other devices are working so it must be a problem with the Kindles. Is there a setting I can change on the router or does the Westell router just not work with the Kindles?
My Belkin Wifi router which was working fine earlier has stopped working now. It shows a red/orange light and nothing else ( it normally shows a green light ). The light doesn't blink or flash. As a consequence, my wifi devices aren't connecting to the internet, however i can connect via my pc normally through my modem. I have a iball Baton modem and the model number of my wifi router is F7D1301 V1.
I have Beetel 450TC1 Wifi router (3 yrs old) and configured with BSNL broadband. The DSL light goes in stable state whenever I took the phone in dialing mode. And internet working well at that time. When I put my phone down, again goes off!
A few days ago my internet suddenly stopped working. I plugged in the ethernet cord and everything worked fine. Checking the properties in the device manager showed the device was working properly, I also tried resetting it to make sure it was enabled but it did not work.
Upon troubleshooting, the "Windows Network Diagnostic" said the problems was that the Wireless adapter was not turned on. Using the switch on the front of the laptop as well as the function keys does nothing. Usually a graphic pops up showing if the WiFi is on or off, changinging transparent to show the WiFi is disabled. Now when I turn the switch on it always appears transparent, effectively going from off to off
So I know the computer reads both the function keys and the switch on the front but both methods never actually turns the adapter on. I just finished a system restore and nothing has changed
We got a lynksys model at our home. it seems that everything is working the pc's connected with cables are working with internet. The wifi sends out and you can get on it. But internet isn't working with wifi also if it says connected etc.
I am having a trouble with my router, our modem is the one that is connected to a TV box and it comes with a wifi function(a modem with a wifi function). I am not sure how to set it up, so I connected it to E4200 which is located in another room using CAT6 flat cable and set it to "Bridge mode". But whenever I open the TV box, the wifi won't work, and when it's closed, it works. :s how weird is that. Are there any problems? The modem with wifi will always work either way I open/close the TV box, but the E4200 wifi will only work when I close the TV box. I asked my service provider about this and they tell me it's not their problem anymore.
I have 3 computers, all Macs. Two are hooked into my WRT54GP2 via ethernet cables, and one is using WiFi (Airport Extreme). All get an IP number from the router via DCHP (no hard numbers). The router is also hooked up to a Motorola Surfboard cable modem.The two Macs using ethernet have no problems at all, and can access the internet and share files and printers. The WiFi Mac, however, can access the Internet fine, but cannot mount the other machines as file servers. It doesn't even ping them. What is going on in the setup of the router that is preventing the ethernet machines from being seen properly by the WiFi Mac?
I've tried all sorts of settings, and I'm still holding out that its a setting possibly, but I have a E3500 and devices on both 5Ghz and 2.4Ghz... Most of them, probably when idle, seem to stop working over WIfi. They still have decent connection, but every internet related request just times out. Disable and reinable the wifi and it works great again.
Could this be defective wifi radios? or could it really be interference? I have it happening on multiple devices. Also, I'm not far away from the router when it occurs, and when I reconnect, it seems to work just fine for a while. Basically the big problem is on the cell phones and tablets because I'll miss notifications... I'll turn off the wifi and turn it back on when I use the device next, then a flood of notifications will come in. Again, it's not just a phone thing, tablets and laptops have the same problem, that's just the main reason I want it fixed.
I have a E4200 updated to the latest firmware I have problems with the wifi on the 2.4GHz band, in fact, at power on, many times wi-fi on the 2.4GHz band doesn't work but the 5GHz band works normally. After some reboots the wi-fi operating normally on both bands.
I have a D-Link DIR-615 router and can't get the internet working and have done everything possible to get it working. the globe light which is the internet light will not turn from amber to green. I have done a factory reset which is why this occurred in the first place. After the reset the globe stayed orange and the internet refused to work now everything is up but the wireless will not work nor the internet I have gone through both the manual set up and set up wizard and tried all options.
I have been using a d-link router for some time now and since yesterday it has stopped working ( I have an orange 'world' light on all the time) After looking around this site I have tried resetting etc and nothing works. If I plug the ethernet cable into the modem I can get on the internet if I plug the cable into the router then nothing. These are the details I got from the config all when I plugged the ethernet into the router.
My router suddenly stopped working yesterday and I've tried everything I can think of to fix it. I have one computer wired directly in to it and a few laptops that use wireless connections.The power LED and the internet LED light up, but the status LED and the WLAN LED do nothing. Pushing the factory reset button on the back doesn't seem to do anything.Can't connect to the router site (192.168.0.1) The internet works fine when I plug in to it directly, so its definitely the router.
Setup that was working. DCM-202 to AT&T Micro Cell to DIR-601 wi-fi.Now I can direct connect MacBookPro to DCM-202 and get internet. If I connect to DIR-601, either via ethernet or wi-fi, no internet. If I try another router, Apple Time Capsule, I get same result. If I just do an ethernet pass thru using the AT&T Micro Cell, still no internet. Basically, the DCM-202 will direct connect via ethernet to my laptop, but not pass thru an ethernet connection for any other devices.
I have a Dlink DIR-615 wireless router that up until a few days ago was working perfectly. Then I had to turn it off at the wall before a storm and it has stopped working. I have tried resetting it with no luck. I am able to get internet try to get onto on my desktop without the router.I have tried to connect to 192.168.0.1 it won't let me. I can't get on there with an internet connection either. As soon as I connect the router the default gateway disappears. [code]
I have a iMac with 2 AppleTVs all connected to a D-Link DIR-655. I used to run iTunes on Windows 7 and everything worked fine (before I got the iMac). Here's the problem - since moving over to the Mac, when the AppleTVs are wire connected to the network, the iTunes library on the iMac will not show up in the AppleTVs. The AppleTVs work fine otherwise (they can both connect to the Internet with no problem). I also cannot see the iMac's iTunes library or the AppleTVs in the iPad's remote app. When I then disconnect the ethernet wire from the AppleTVs (so they hook up wirelessly to the DIR-655), it works fine (iTunes library on the AppleTVs, and everything is showing up in the iPad remote application). After the wireless connection is established, if I plug the ethernet wire back into the AppleTVs (to take them off wireless and force them back onto the network wired), it works fine as well, until I reboot the iMac, then back to square one with the same problem.
As mentioned, it works fine with the Windows 7 PC, but if the iMac is turned on on the same network router, same problem with the Windows 7 PC (library will not show up in the AppleTVs). As soon as I turn off the iMac, the Windows 7 iTunes libraries show up in the AppleTVs (no need to wirelessly connect). There's clearly some conflict being created with the iMac with the DIR-655 that's causing this. I've tried enabling Multicasting and port forwarding TCP 3689, and this didn't fix it either.
Today, while surfing the web my internet connection on my PC just randomly shuts off. I go check on my laptop and its normal. My WiFi says that I am connected to an Unidentified network with no internet access. So i got frustrated and checked all the forums and nothing seemed to work. So i restored my computer to factory settings and I still got this problem. Does this mean my Wifi Card is bad? Is it a virus? I can see other networks fine but i just cant connect to mine!
I bought the DIR-655 less than a year ago in Amazon, shipping it to NY. And then I came back to Uruguay. Almost 3 months ago the router stopped working completely and I started to search for support in Uruguay.After calling US support I was told I should contact the local or regional D-Link (which I later found is D-Link LA). And via DLinkLA.com I found the company TELEDATA S.A. url... who does the official support for D-Link in Uruguay. They told me the router couldn't be fixed, and told me DLinkLA, which is based in Chile, would either send me a working one (they also told me the service/warrany was already approved), or send me the money and gave me their contact details.After two weeks of contacting them, trying to get their attention, they finally told me it was not their responsibility because it was bought in the US. And now they don't return my e-mails.
My DIR-655 wireless router randomly quit working. It was plugged into my modem and working great, then it just stopped. I restarted my modem and router, but the "Ethernet" light on my modem does NOT shine when plugged into the router.
I'm sure that the modem is fine, as I have it connected to my PC right now. I also tried it with my friend's wireless router - works fine.
I believe this may be hardware-related. I have tried restoring the router to factory settings and then setting up everything again: No luck.
I haven't had this router for long! Just a little over two years I believe (or it may be just a little over one). I have another wireless router somewhere that's 6-7 years old and still works. If it is hardware related (as in the router just randomly broke), then rest assured I will not be purchasing another D-Link router in the future.
I have a Dlink Dir-615 router and a Motorola SB6120 Modem. For some reason the router suddenly says it's receiving internet access from the modem. It has worked for several months beforehand. I tried another Dlink modem and got the same results. I have my computer hooked directly to the modem hence the ability to make this post.
My D-Link DIR-655 will no longer let me pull up any web pages after several hours. For example, it works great when first rebooted, but the next morning web pages have timed out. When it is broken, I'm unable to connect to web pages via another wireless access point that i've plugged into the D-Link. I'm unable to use any of the wireless PCs or devices in my house.After it's rebooted, it works well for at least a few hours. It has the latest firmware and has basic, out of the box settings.
My D-Link Pocket Router Work like 2 Weeks. and then could not connect to my internet. i am using for connecting my computer to the internet. but i had all the correct info in. it try's to connect. yet does not connect. the AP Mode works. CL (Client)
Region : Others Model : TL-MR3420 Hardware Version : V2 Firmware Version : ISP : YU KENYA
most service providers in our country dont have 3G or 4G support,but all the same i bought an MR3420 router in the hopes that since my modem is listed,it would still connect even if on an EDGE/2G network like YU-Kenya.But this is not the case,the router does not recognize the modem i.e it says the modem is unplugged but when i look at the logs,it indicated it detected the modem but LTE was set to zero. providing a modem bin file for compatibility under EDGE/2G connection otherwise my router will be of no use to me.
