The other day, I decided to set up a wifi router. Once I'd set it up, I connected my other devices to it, (laptop, iPad, iPod, etc.) but when I tried to connect my PS3 to it, the connection just timed out when it was testing the connection. I've tried it a few times - I thought maybe I'd typed in my WPA key wrong, to no avail.
View 1 Replies
How do I connect my Iphone to my ATT router, Gateway 2 WIRE WIFI?
View 1 Replies View RelatedI've got a Gateway 2wire 3800 HGV-B router which works fine wirelessly, but when using an ethernet cable to connect to the internet, it doesn't even recognize the computer. My laptop runs wirelessly all the time, and I recently picked up a desktop PC for home here, and it's the first wired connection I'm using, but for some reason the wired connection isn't connecting to my network, but instead it's own Unidentified Network.
View 2 Replies View RelatedI want a ipad 2 and I have 2wire 2700HGB. It needs a phone jack, yet it is suppose to be wirless. What do need to do. We have our home protection system in the kitchen in it's phone jack.I am so confused! Can I have a wireless connection and a home phone line together?
View 2 Replies View RelatedWhat Wifi Extender will work with a 2Wire 707 380 1HGV?
View 2 Replies View RelatedHow can I get my router to stay at one ip so I can set it as the DMZ server?
View 1 Replies View Relatedwhere do I find wep # for 2wire router
View 5 Replies View RelatedMy linksys wireless router bit the dust, trying to resurrect this old modem for use as a wireless router only. I've got the 2wire 2701hg-d connected to my isp's cable modem and to my laptop via two of the LAN ports. the lac connection gives me internet access (obviously...here i am...) but the wireless connection gives me no internet access...i can log in to the 2wire's firmware via the wireless connection...but i' m not sure what settings (if needed) i have to change.
View 1 Replies View RelatedNoticed several devices have connected through my home network previously. Not sure how it is done,currently these inactive devices are displayed, i would like to know how can i block them from the firewall just in case it is connecting again?
View 3 Replies View RelatedI can't connect wirelessly or hardwired. My internet provider is AT&T DSL. My router is a 2Wire 2701HG-B and my antivirus and firewall is McAfee. Attached are the ipconfig/all and Xirrus Wifi.
View 16 Replies View RelatedI need to increase range on recently installed 2Wire 3600HGV ATT U-Verse DSL Modem WIFI Router. The signal is weak (1 bar) in my back bedrooms of my home (+/-50 feet from my desktop & 3600 HGV router).
AT&T Tech support worked with me to boost signal of 3600HGV but still weak signal. They did not know about repeater/bridge that would with (compatible) with the 3600HGV router.
I used to have the D-Link DIR-655 wireless router as my wireless home network set-up.
I have cable internet can I use 2wire DSL router/modem with cable internet? I need to do wireless in my house?
View 1 Replies View RelatedI purchaseda trendnet 692 GR router because I understood that I would be able to stream from let's say my computer to my TV that is up the stairs. Here is the problem. I did get the router to use my existing 2Wire 2701HG modem.Yes I can connect my Samsung 6100 to the wireless 2Wire but I thought the trendnet setup would work the best.I and Trendnet support set up my router and media bridge and the two do work but my tv won't work through the MB. I have connected to the network but the next part of the connection (the internet) won't connect. I have tried different IP settings that I thought would connect but nothing so far has worked.Also I have taken a 50' ethernet cablefrom the trendnet router to the tv and I do get a connection.I have also taken a laptop through the media bridge and connected to the trendnet router.The customer service at trendnet can't take this to the next level(which is a$40 one session professional service)
View 19 Replies View RelatedI purchased a ZyXEL 3205 to serve as a universal repeater in my house, to boost the DSL wireless signal from upstairs to downstairs. I have a 2WIRE router, and my DSL is through AT&T. The wireless works just fine (and we've been connecting multiple devices through it for over a month), but the signal is weak downstairs, so this seemed like a good cheap solution.I found several good sets of instructions on setting up the 3205 as a repeater, so while complex, that was not really a problem.
However, the 3205's status is still marked as "disassociated", which means that it won't connect to the 2WIRE. It can see the signal, and I'm telling it to connect and giving it the correct key. It also broadcasts just fine, since my wireless devices can connect to the 3205 when it is turned on. However, the 3205 refuses to actually connect to the 2WIRE for some reason. Is there a known issue with connecting? I've checked all the obvious things - they're set to be on the same wireless channel, both using the same encryption settings, and there aren't any ip conflicts happening, since the 3205 is set to an unclaimed ip in the same space.
I am switching from Qwest to another ISP that has provided me with a modem that is not set up with an internal wireless router. I've been told that I can configure the 2wire 270hg-d to use it as a wireless router that can then be connected to the ISP modem. Need proper configuration settings on the 2wire..
View 4 Replies View RelatedI have a 2wire 2700hg-d (Qwest/Centurylink) router serving 3 or 4 computers. Is there a way I can either block or monitor porn viewing activity of users through the router?
View 2 Replies View RelatedI have a network that starts with a Linksys wireless router (DSL connected here) then it goes to a Netgear switch (computers connected here) and then a Netgear wireless router for an iMAC to connect to. I can't see the last router or the iMAC on my Win 7 machine? when I map network I get an error message about an incompatible device.
View 1 Replies View RelatedHow do you connect two routers together to increase signal through the whole house? I am trying to use the n300 as my main router (its hooked to cable modem) and use the 2wire as an access point.The two are connected by a known good ethernet cable.
View 2 Replies View RelatedI currently have Comcast as my ISP.However there are only 4 wired ports on the router and I need an additional 2 ports for my needs. I have a 2wire 38000HGV-B Uverse Wireless gateway. I wanted to know if I could use one of the output ports from the Comcast wireless gateway and feed the 2wire Gateway to achieve the additional ports that I need. Also the wireless router from comcast is so difficult to setup that I don't even use the wireless. The 2wire gateway is much easier to setup and use and I could have wireless available where I don't have it right now.
View 2 Replies View RelatedI've been having some trouble with my ATT router. I've had it for months and there have never been any issues until now. It does not seem that it is broadcasting WiFi like usual. It will not show up on the WiFi network list on both my iPod and my laptop. I've tried resetting the router (by unplugging it and plugging it back in).
View 5 Replies View RelatedNo WiFi access from working router.I was trying to set up my AppleTv and by accident unplugged my router...I have unplugged my router & modem several times and they all show the light that the network is on..But I cannot access the WiFi network from my Ipad or Mac?what else can I do???
View 1 Replies View Relatedim deployment and we have hardwire internet in my room. wanting to use all other devices eg. iphone and what not i bought a router to plug the hardwire in to and run the wifi off the router for all devices. its made by TP-LINK the model is TL-WR940N. it worked great for a while but then kept giving me DNS server is not responding but i could plug the hard cable in my computer and the internet would work fine? so i reset the router and set it all up again like before. Now i cant get it to run wifi off it anymore it recognizes and connect through wifi but no internet and its telling me i need to plud the hardwire in to my internet but my computer is recognizing it and saying i have internet access, but no internet i mean its not even thinking if there is internet.
View 1 Replies View RelatedEveryone's 2wire works in bridge mode of they follow these steps url...but when i try i get no internet connection nor does it pick up any internet activity. I even input my account and dsl password in the netgear router gateway still no luck.I'm trying to use the netgear router because in my room i only get 2 signals bars and if i switch to the netgear wireless N router the signal strength would be alot better.
View 7 Replies View Relatedi have set mywifi router but when i put the same password in my nokia E63 it says invalid for wpa?
View 1 Replies View RelatedI have 3 Kindles (2 Kindles with keyboards and 1 kindle touch) that have wifi and they were working fine until our 2Wire router died and we got a new Westell DSL Wireless Gateway from ATT (model: B90-755025-15). All of our other wireless devices are working fine (Ipods, laptop, Ipad) with the new wireless router, but the Kindles will now not connect to our wifi network. I type in the same network key that I did for the other devices but it doesn't work. Amazon said all sofware was up to date on the kindles and it is a problem with the settings on the router because they were working before we got the router. AT&T won't work for me because they say the other devices are working so it must be a problem with the Kindles. Is there a setting I can change on the router or does the Westell router just not work with the Kindles?
View 4 Replies View RelatedMy Belkin Wifi router which was working fine earlier has stopped working now. It shows a red/orange light and nothing else ( it normally shows a green light ). The light doesn't blink or flash. As a consequence, my wifi devices aren't connecting to the internet, however i can connect via my pc normally through my modem. I have a iball Baton modem and the model number of my wifi router is F7D1301 V1.
View 4 Replies View RelatedI have a 2wire Modem connected to a Cisco Wireless N Router, that is connected to another Cisco Wireless N Router. All was working well. In my absence sbc (AT&T) changed the pass word of the 2wire Modem. The 2wire has stoped communication with the Cisco Wireless N Routers. I connected am Ethernet wire to one of the ports of the 2wire, and connected it to the 2nd Cisco Wireless N Router. The signal gets to the 2nd Cisco Router. However, when I attempt to access the Internet on the CPU connected to the 2 Cisco Router, I get an error Message saying that there is a problem with the Modem and/or Router. On the available Networks selection screen I can see the connections that I want. The selection info shows connected. But when I try to connect, the I can't.
View 3 Replies View RelatedI'm using a 2wire 2701HG-B wireless router/dsl modem combo. My computer is a Win 7 Ultimate 64bit. The router/modem has been reliable for the last 2 years.. hardly ever needing a reset, reboot, or anything. Then all of a sudden my wifi network didn't show up anymore. I did a reboot, nothing. Kind of weird so I got on the phone with AT&T and they walked me through some simple stuff and they determined it's either the router or my computer. Well I know it's not the computer, I can use the mobile hotspot on my android phone and it gets on just fine.All of the lights on the router are green, AT&T showed that all the tests show the internet connection is working. Since the router is not sending out a wifi signal anymore, I had to plug the ethernet cable in. The system recognizes a connection but says it isn't connected because it is a "public" connection. Additionally, if I go to network connections with the cable plugged in, I can see my DirecTV DVR is showing on the network (because it is connected to the router via ethernet too). So it isn't broadcasting wifi, I can see my DVR over the network in windows, but I can't get the IP renewed.
Here is the ipconfig /all print:
Windows IP Configuration
Host Name . . . . . . . . . . . . : thindery-laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
When I try to do an ipconfig /renew, it says this:Windows IP Configuration An error occurred while renewing interface Local Area Connection : The operation was canceled by the user.An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified.The AT&T rep said I may need a new modem and router. It seems weird because it worked fine one night, then the next night all of a sudden it didn't work.
I have Beetel 450TC1 Wifi router (3 yrs old) and configured with BSNL broadband. The DSL light goes in stable state whenever I took the phone in dialing mode. And internet working well at that time. When I put my phone down, again goes off!
View 1 Replies View RelatedASUS Notebook G60Vx Series
Windows 7 Home Premium 64-bit
Intel(R) WiFi Link 5100 AGN
A few days ago my internet suddenly stopped working. I plugged in the ethernet cord and everything worked fine. Checking the properties in the device manager showed the device was working properly, I also tried resetting it to make sure it was enabled but it did not work.
Upon troubleshooting, the "Windows Network Diagnostic" said the problems was that the Wireless adapter was not turned on. Using the switch on the front of the laptop as well as the function keys does nothing. Usually a graphic pops up showing if the WiFi is on or off, changinging transparent to show the WiFi is disabled. Now when I turn the switch on it always appears transparent, effectively going from off to off
So I know the computer reads both the function keys and the switch on the front but both methods never actually turns the adapter on. I just finished a system restore and nothing has changed
I just switched over from AT&T Uverse to time Warner cable for Internet. I bought a Motorola Surfboard sbg6580. I have the surfboard hooked up and all is well. Now I would like to do in put the old 2wire from AT&T in a room upstairs and use it as place I can plug in the Ethernet cords and also transmit another signal. I have what's a called plug link that is plugged in down stairs and then another upstairs and it allows the Internet signal to run through the power lines. So it just about the equivalent of running a cord for down stairs to upstairs. So basically I just need to plug more then 1 thing upstairs that isn't wireless and I would also like to transmit a 2.4ghz signal upstairs and use my Motorola to transmit a 5ghz.How would I set up the 2wire to do this.
View 3 Replies View RelatedWe got a lynksys model at our home. it seems that everything is working the pc's connected with cables are working with internet. The wifi sends out and you can get on it. But internet isn't working with wifi also if it says connected etc.
View 1 Replies View RelatedI am having a trouble with my router, our modem is the one that is connected to a TV box and it comes with a wifi function(a modem with a wifi function). I am not sure how to set it up, so I connected it to E4200 which is located in another room using CAT6 flat cable and set it to "Bridge mode". But whenever I open the TV box, the wifi won't work, and when it's closed, it works. :s how weird is that. Are there any problems? The modem with wifi will always work either way I open/close the TV box, but the E4200 wifi will only work when I close the TV box. I asked my service provider about this and they tell me it's not their problem anymore.
View 2 Replies View Related
