Install 2wire Gateway Behind Linksys Wireless Router?
Oct 30, 2011
I currently have Comcast as my ISP.However there are only 4 wired ports on the router and I need an additional 2 ports for my needs. I have a 2wire 38000HGV-B Uverse Wireless gateway. I wanted to know if I could use one of the output ports from the Comcast wireless gateway and feed the 2wire Gateway to achieve the additional ports that I need. Also the wireless router from comcast is so difficult to setup that I don't even use the wireless. The 2wire gateway is much easier to setup and use and I could have wireless available where I don't have it right now.
View 2 Replies
ADVERTISEMENT
Jul 22, 2012
I've got a Gateway 2wire 3800 HGV-B router which works fine wirelessly, but when using an ethernet cable to connect to the internet, it doesn't even recognize the computer. My laptop runs wirelessly all the time, and I recently picked up a desktop PC for home here, and it's the first wired connection I'm using, but for some reason the wired connection isn't connecting to my network, but instead it's own Unidentified Network.
View 2 Replies
View Related
Apr 18, 2011
How can I get my router to stay at one ip so I can set it as the DMZ server?
View 1 Replies
View Related
Nov 6, 2011
How do I connect my Iphone to my ATT router, Gateway 2 WIRE WIFI?
View 1 Replies
View Related
Oct 2, 2012
I have at&t DSL.I NEEDED to upgrade my wireless gateway from the 2wire wireless-G gate way that I had.I also have a Netgear WNDR-4000 750N Wireless Dual Band Router.
I know I needed an at&t modem to run my DSL, so I purchased (before reading reviews) a Netgear 7550 Wireless Gateway from at&t (they did not have any "N" single user modems (if there is such a thing).I have read through other posts that it is possible to connect the two and I would not need the 7550 for anything else but a modem (disabling broadcast).
The question is ... do I REALY need to do all this or can I just get away with the 7550?Or will the Netgear WNDR-4000 750N Wireless Dual Band Router, if installed and used, fix some of the issues that other 7550 users have said in other posts?
Wireless ... I have 3 gaming systems, two PC's, a tablet and 4 smartphones.I will be using 3 wired ports ... 1 gaming system, PC, and a blue-ray.
And yes, my 2wire wireless-g gateway ran all these ... not efficiently or reliably, but they all did run.
I have not received the Netgear 7550 yet, just trying to get some opinions on which setup would be better.
View 2 Replies
View Related
Oct 15, 2011
I cannot connect my Toshiba DX1215-S21 with my 2wire gateway. There are 7 devises that are connected and on wifi.
View 1 Replies
View Related
Oct 4, 2011
im having a problem with my 2701hgv -e. I connected it to my laptop and I tried to enter the settings of the router but was unable to do so. but when I ran the ipconfig command, there was no default gateway. I tried to press the reset button but nothing happened.
View 4 Replies
View Related
Jan 24, 2012
I recently swapped out an RV082 with a newer model (still RV082 but black and a different interface). I configured the Gateway to Gateway VPN exactly as it was before but none of the three other RV082's will connect. I have tried deleting the connections several times to no avail. I have aggressive mode disabled and have tried with the firewall on and off. Below are the settings (IP's have been X'd out) and the log.
Settings:
IP OnlyIP Address : X0X.X0X.20.31Local Security Group Type : IPSubnetIP RangeIP Address : Subnet Mask : Remote Group Setup
Remote Security Gateway Type : IP OnlyIP AddressIP by DNS Resolved : Remote Security Group Type : IPSubnetIP RangeIP Address : Subnet Mask : AES-192AES-256AES-128 AES-192AES-256 AES-128 IPSec Setup3DES Keying Mode : ManualIKE with Preshared keyPhase 1 DH Group : Group 1 - 768 bitGroup 2 - 1024 bitGroup 5 - 1536 bitPhase 1 Encryption : DES Phase 1 Authentication : MD5SHA1Phase 1 SA Life Time : secondsPerfect Forward Secrecy : Phase 2 DH Group : Group 1 - 768 bitGroup 2 - 1024 bitGroup 5 - 1536 bitPhase 2 Encryption : NULLDES3DES Phase 2 Authentication : NULLMD5SHA1Phase 2 SA Life Time : secondsPreshared Key : Minimum Preshared Key Complexity : EnableLOG:
[code].....
View 1 Replies
View Related
Jul 11, 2012
My two RV042 , one at home and the other one at my working site, constantly lost VPN connection after successfully connected.Both Firmware are identical. [code]
View 1 Replies
View Related
Feb 8, 2011
we do have 2 Rv042, one in my office and one in my house.. in the office we do have static ip and at home none.. question is can i connect the two RV042?
View 1 Replies
View Related
Mar 22, 2011
I have some problems in my network with Gateway to Gateway Vpn Connection using two Rv042 routers.
I cannot ping the computers with static ip configuration.
In local an remote computers who have DHCP ip configuration i can ping each other .
View 1 Replies
View Related
Jul 26, 2012
We have a VPN setup between two Cisco RV082 routers, the VPN status shows as connected however I can't ping the other network. I am unable to ping between routers, let alone ping computers behind those routers.
We have 2 branches, branch 1 is on a static IP and branch 2 is Dynamic. I am able to connect via QuickVPN from Branch 2 to Branch 1 and remote desktop to computers, however have yet to VPN/remote desktop in the opposite direction.
To me it seems like a firewall issue at branch 2, but what's causing this. Also they are currently running 2 differnet firmware version not sure if this would cause a problem.
View 1 Replies
View Related
Apr 6, 2013
i am trying to setup a vpn Gateway To Gateway when i setup the vpn i can ping the 2 rv042 i cant see any computer in the network places when there comect we need to see the computer in the network places so are pos will run?
View 1 Replies
View Related
Mar 6, 2011
I have an RV082 and a RV042. I have been able to successfully establish a gateway to gateway vpn connection between them both, and I can remotely administer each router through the VPN connection, but I am unable to ping computers from one side of the connection to the other. For example, a computer in the 10.10.1.0 subnet can't see / ping / communicate with a computer in the 192.168.1.0 subnet.
Below are the configurations for each. Aside from the static IP configurations and the VPN configurations, no other changes were made to the routers. RV082 DHCP Enabled Tunnel Status: Connected Local Group Setup
IP Only: X.X.X.66Local Security Group Type: SubnetIP Address: 10.10.1.0Subnet Mask: 255.255.255.0Remote Group Setup
View 1 Replies
View Related
Jan 22, 2012
My linksys wireless router bit the dust, trying to resurrect this old modem for use as a wireless router only. I've got the 2wire 2701hg-d connected to my isp's cable modem and to my laptop via two of the LAN ports. the lac connection gives me internet access (obviously...here i am...) but the wireless connection gives me no internet access...i can log in to the 2wire's firmware via the wireless connection...but i' m not sure what settings (if needed) i have to change.
View 1 Replies
View Related
Jan 13, 2011
I am switching from Qwest to another ISP that has provided me with a modem that is not set up with an internal wireless router. I've been told that I can configure the 2wire 270hg-d to use it as a wireless router that can then be connected to the ISP modem. Need proper configuration settings on the 2wire..
View 4 Replies
View Related
Sep 7, 2012
I have a network that starts with a Linksys wireless router (DSL connected here) then it goes to a Netgear switch (computers connected here) and then a Netgear wireless router for an iMAC to connect to. I can't see the last router or the iMAC on my Win 7 machine? when I map network I get an error message about an incompatible device.
View 1 Replies
View Related
May 9, 2012
install linksys e3000.
View 1 Replies
View Related
Jun 19, 2011
How to install linksys wireless router to access point?
View 1 Replies
View Related
Sep 16, 2008
I just bought this router yesterday. Can someone link me the most up to date firmware, and explain how to install it?
View 9 Replies
View Related
Oct 20, 2011
I have XP 64bit OS and I can't seem to get the setup CD to install E4200 Router. I have looked at the FAQ and it says it should be compatible with all Windows OS. Is there a link out there to the drivers I need to do this?
View 1 Replies
View Related
Sep 14, 2012
I first bought the e1200 version and when I tried to download it on my computer, it worked at first and installed correctly, but the cisco connect didn't properly install. I was able to log into the router online setup page ONE time. I tried to reset it and reinstall but it will not work.So I thought ok let me go and purchase a better one (thinking it was the router version having issues). So I brought it back and purchased the E2500 and I am having the same trouble.
I have tried to reset it about 20 times and reinstall and it will not install at all. It still gives me internet, but I cannot log into the http://192.168.1.1/ page at all, it tells me internet cannot display.
View 1 Replies
View Related
Jan 1, 2013
We currently get our internet through a small company that only uses a static IP and I cannot get our WRT160N router installed so I can manually set up our internet connection. Is there any way to install the router without using the CD provided. I keep getting the error code 322 during installation.
View 1 Replies
View Related
Dec 29, 2012
I bought the EA6500 yesterday and tried setting it up with the CD that came with it and it tells me ( YOUR COMPUTER DOES NOT HAVE NETWORKING CAPABILITY ) and will not install. I have the capability for networking because I have a network. I was able to set the router up but not with the software on the CD. I have tried a number of times and still get the same message and when I click on view details this is what I get .I have a network adapter and it works just fine.
View 9 Replies
View Related
Feb 1, 2008
I got my WRT54G from my son when he moved out of his apartment but he could not find the manual and software, I can download the manual but what about the software? I got laptop for xmas and it has Vista Premium on it and I want to install the Linksys but I am not sure about the software, do I have to have it to install?
View 9 Replies
View Related
Feb 8, 2011
I have a 2wire Modem connected to a Cisco Wireless N Router, that is connected to another Cisco Wireless N Router. All was working well. In my absence sbc (AT&T) changed the pass word of the 2wire Modem. The 2wire has stoped communication with the Cisco Wireless N Routers. I connected am Ethernet wire to one of the ports of the 2wire, and connected it to the 2nd Cisco Wireless N Router. The signal gets to the 2nd Cisco Router. However, when I attempt to access the Internet on the CPU connected to the 2 Cisco Router, I get an error Message saying that there is a problem with the Modem and/or Router. On the available Networks selection screen I can see the connections that I want. The selection info shows connected. But when I try to connect, the I can't.
View 3 Replies
View Related
May 13, 2011
I'm using a 2wire 2701HG-B wireless router/dsl modem combo. My computer is a Win 7 Ultimate 64bit. The router/modem has been reliable for the last 2 years.. hardly ever needing a reset, reboot, or anything. Then all of a sudden my wifi network didn't show up anymore. I did a reboot, nothing. Kind of weird so I got on the phone with AT&T and they walked me through some simple stuff and they determined it's either the router or my computer. Well I know it's not the computer, I can use the mobile hotspot on my android phone and it gets on just fine.All of the lights on the router are green, AT&T showed that all the tests show the internet connection is working. Since the router is not sending out a wifi signal anymore, I had to plug the ethernet cable in. The system recognizes a connection but says it isn't connected because it is a "public" connection. Additionally, if I go to network connections with the cable plugged in, I can see my DirecTV DVR is showing on the network (because it is connected to the router via ethernet too). So it isn't broadcasting wifi, I can see my DVR over the network in windows, but I can't get the IP renewed.
Here is the ipconfig /all print:
Windows IP Configuration
Host Name . . . . . . . . . . . . : thindery-laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
When I try to do an ipconfig /renew, it says this:Windows IP Configuration An error occurred while renewing interface Local Area Connection : The operation was canceled by the user.An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified.The AT&T rep said I may need a new modem and router. It seems weird because it worked fine one night, then the next night all of a sudden it didn't work.
View 5 Replies
View Related
Jan 17, 2012
I have a WRT54GS which works fine with Linux both from both wired and wireless computers using Linux. But I reinstalled Win XP and now I can't reestablish a connection following the EasyLink advisor. I did have a connection under Win XP before.
The last instruction on the Easylink advisor tells me to look for something marked "local" I don't find that word on the screen.
View 2 Replies
View Related
Dec 1, 2012
My son gave me an E3000wireless router but the first instruction is to insert the CD and follow instructions. I don't have the CD. How do I install it? Also, this is replacing an older router that is installed and working. Can I install the E3000 without removing the older router first?
View 3 Replies
View Related
Dec 13, 2012
How to install the Cisco/Linksys WRT120n wireless router with respect to using Roku.I have one computer, a laptop, which I'm using as a desktop, in that it is stationery and the only wireless device is the Roku. When I open Network File Sharing, sometimes i see 2 instances of linksys, other times just 1. general setup or whatever so I don't have to reboot the computer every 2 hours to watch Roku.
View 1 Replies
View Related
Dec 28, 2011
I have this router that wouldn't connect because I lost the password. I held the reset button for 90 seconds and it neverwould reset.
View 4 Replies
View Related
Mar 10, 2012
I came into an old Win 7 computer (64-bit) with a WMP54G v4.0 wireless card in it. Apparently the driver had already been installed previously but when I booted the computer it didn't acknowledge the existence of the card or drivers. I installed the driver from here[url]... and restarted the computer when prompted (the card was already in the computer). Upon restart the setup was supposed to complete, but it never came up. When I re-ran the setup it just said the driver is already installed.The card still isn't being recognized, scanning for new hardware in the device manager doesn't bring it up. There is an entry for a "Network Controller" with no driver installed, it may be the WMP54G but trying to manually install the driver doesn't work. Windows just says it can't find the driver even when I point the install wizard right to its location.
View 1 Replies
View Related
Aug 11, 2012
Instlling WPA2 on my router I had this router WRT54G ver 6 for several years and it works perfect only thing is I have no security on my n wireless
View 3 Replies
View Related
